Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic phases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Characterization of fluorite-structured ferroelectrics using transmission electron microscopy: Techniques, challenges, and recent advances

Fluorite-structured ferroelectrics, such as hafnium oxide and its alloyed variants, are key candidates for next-generation memory devices. Yet, fundamental questions about switching mechanisms, domain dynamics, and phase evolution remain open. Transmission electron microscopy (TEM) provides unique capabilities to address these challenges by simultaneously resolving the positions of anions and cations, chemical variations, and structural transformations. Recent advances—including in situ heating, electron beam-induced switching, electron energy loss spectroscopy, and differential phase contrast imaging—have revealed critical insights into phase transitions, potential switching pathways, and oxygen vacancy behavior. However, experimental barriers such as TEM sample-preparation-induced artifacts, high coercive fields, and imaging constraints persist, especially for polycrystalline films. By offering a focused overview of current TEM developments in fluorite ferroelectrics, this work outlines how TEM contributes to understanding key phenomena and proposes a roadmap for future studies.

36 MATERIALS SCIENCE↗

Dynamics of iodine geminate recombination in supercritical xenon solvent: Caging effect

Understanding the dynamics of chemical reactions in solutions is vital, as their rates and kinetics are significantly affected by the solvent environment. Supercritical solvents offer extensive applications in chemical reactions by enabling the manipulation of the solution environment. Here, in this study, we investigate the geminate recombination of iodine in a supercritical xenon solvent by using ReaxFF-based molecular dynamics simulations. Our findings reveal that the highest iodine recombination rate occurs near supercritical conditions, while lower-pressure conditions lead to reduced collision rates and unstable recombination, and higher-pressure conditions hinder iodine diffusion, resulting in a lower recombination rate. Our analysis shows that the xenon local density at the time of recombination is at least 2.5 times higher than the global density, confirming the presence of xenon clusters surrounding the Iodine atoms. This observation is further supported by coordination number analysis, which confirms an elevated xenon local density during recombination. In addition, the correlation between the total energy of xenon atoms within a cluster and recombined iodine atoms underscores the kinetic energy transfer process, validating the occurrence of geminate recombination. The excess kinetic energy from the recombining iodine atoms is transferred to the surrounding xenon atoms. Our examination of geminate recombination demonstrates that iodine atoms confined within xenon clusters—whether through manual insertion of atoms or the fast dissociation of an iodine molecule within xenon clusters—are more likely to recombine as primary geminate recombination. However, extending the iodine molecule dissociation time allows iodine atoms to diffuse out of the cluster, and the recombination to shift toward secondary geminate recombination.

Cage effect↗

Quantifying electron transport in aggregated colloidal suspensions in the strong flow regime

Electron transport in complex fluids, biology, and soft matter is a valuable characteristic in processes ranging from redox reactions to electrochemical energy storage. These processes often employ conductor–insulator composites in which electron transport properties are fundamentally linked to the microstructure and dynamics of the conductive phase. While microstructure and dynamics are well recognized as key determinants of the electrical properties, a unified description of their effect has yet to be determined, especially under flowing conditions. In this work, the conductivity and shear viscosity are measured for conductive colloidal suspensions to build a unified description by exploiting both recent quantification of the effect of flow-induced dynamics on electron transport and well-established relationships between electrical properties, microstructure, and flow. These model suspensions consist of conductive carbon black (CB) particles dispersed in fluids of varying viscosities and dielectric constants. In a stable, well-characterized shear rate regime where all suspensions undergo self-similar agglomerate breakup, competing relationships between conductivity and shear rate were observed. To account for the role of variable agglomerate size, equivalent microstructural states were identified using a dimensionless fluid Mason number, Mn f , which allowed for isolation of the role of dynamics on the flow-induced electron transport rate. At equivalent microstructural states, shear-enhanced particle–particle collisions are found to dominate the electron transport rate. This work rationalizes seemingly contradictory experimental observations in literature concerning the shear-dependent electrical properties of CB suspensions and can be extended to other flowing composite systems.

Science & Technology - Other Topics↗

Development of the first relativistic electron loss probe with pitch and energy resolution in the DIII-D tokamak

A relativistic electron probe has been developed in the DIII-D tokamak, capable of simultaneously resolving pitch angles and energies of runaway electrons (REs) for the first time. Due to the relativistic speeds of REs, their gyro-orbit size becomes comparable to those of fast deuterium with energies in the tens of keV range. This allows for the measurement of RE strike images on a phosphor plane, with their orbits being deflected by the Lorentz force as they pass through a pinhole aperture. The strike positions correspond to the energies and pitch of the incident REs. Monte Carlo N-Particle Transport Code has shown that an ultra-thin phosphor coating significantly reduces the energy deposition from γ-rays, while allowing a much greater deposition from REs, minimizing the background noise. Finally, the novel system, developed for the DIII-D tokamak, is expected to provide unprecedented insights into the phase-space dynamics of REs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Saturation of fishbone instability through zonal flows driven by energetic particle transport in tokamak plasmas

Gyrokinetic and kinetic-MHD simulations are performed for the fishbone instability in the DIII-D discharge #178631, chosen for validation of first-principles simulations to predict the energetic particle (EP) transport in an ITER prefusion baseline scenario. Fishbone modes are found to generate zonal flows, which dominate the fishbone saturation. The underlying mechanisms of the two-way fishbone-zonal flows nonlinear interplay are discussed in details. Numerical and analytical analyses identify the fishbone-induced EP redistribution as the dominant generation mechanism for zonal flows. The zonal flows modify the nonlinear dynamics of phase space zonal structures, which reduces the amount of EPs able to resonate with the mode, leading to an early fishbone saturation. Simulation results including zonal flows agree quantitatively with DIII-D experimental measurements of the fishbone saturation amplitude and EP transport, supporting this novel saturation mechanism by self- generated zonal flows. Moreover, the wave-particle mode-locking mechanism is shown to determine quantitatively the fishbone frequency down-chirping, as evident in GTC simulation results in agreement with predictions from analytical theory. Finally, the
fishbone-induced zonal flows are possibly responsible for the formation of an ion-ITB in the DIII-D discharge. Based on the low EP transport and the large zonal flow shearing rates associated with the fishbone instability in gyrokinetic simulations of the ITER scenario, it is conjectured that high performance scenarios could be designed in ITER burning plasmas through fishbone-induced ITBs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interplay between aging and rejuvenation in spin glasses

Aging in a single-crystal spin glass (Cu 0.92 ⁢Mn 0.08 ) has been measured using ac susceptibility techniques over a temperature range of 0.3–0.8𝑇 𝑔 . In these studies, traditional aging experiments (or “quench” aging protocols) are compared to aging curves constructed from finite-cooling-rate curves. By comparing the growth rates of spin glass order between the two types of aging curves, it is determined that quantitative comparisons between protocols that are taken by quenching and protocols using a finite cooling rate are not possible without a deeper understanding of the interplay between aging and rejuvenation. Finally, we then demonstrate that the data presented indicate that rejuvenation, rather than cumulative aging, is the cause of the discrepancies between the two growth rates.

dynamical phase transitions↗

Microscopic changes governing melting anisotropy: Real-time nanosecond x-ray diffraction

To understand the microscopic origins governing melting anisotropy, in-situ x-ray diffraction (XRD) measurements were obtained in aluminum single crystals shocked along $\langle$100$\rangle$ and $\langle$110$\rangle$ to stresses below and above the melting threshold for each orientation. XRD results and analysis for the two orientations showed significant differences in the microstructure prior to the melting threshold stresses, demonstrating the key role of deformation induced microstructure – in addition to temperature and pressure – on the melting transition. As a result, our findings make a strong case for reconsidering theoretical approaches to melting, specifically for dislocation mediated melting, in shock compressed solids.

crystal melting↗

Quantum geometry embedded in unitarity of evolution: Revealing its impacts as geometric oscillation and dephasing in spin resonance and crystal bands

Quantum Hall effects provide intuitive ways of revealing the topology in crystals, i.e., each quantized “step” represents a distinct topological state. Here, we seek a counterpart for “visualizing” quantum geometry, which is a broader concept. Here we show how geometry emerges in quantum as an intrinsic consequence of unitary evolution, composing a framework compatible with quantum metric and independent of specific details or approximations, suggesting quantum geometry may have widespread applicability. Indeed, we exemplify geometric observables, such as oscillation, dephasing, in magnetic resonance or band driving scenarios. Anomalies, supported by both analytic and numerical solutions, underscore the advantages of adopting a geometric perspective, potentially yielding distinguishable experimental signatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrodynamic fluctuations near a Hopf bifurcation: Stochastic onset of vortex shedding behind a circular cylinder

Here, we investigate hydrodynamic fluctuations in the flow past a circular cylinder near the critical Reynolds number Re c for the onset of vortex shedding. Starting from the fluctuating Navier-Stokes equations, we perform a perturbation expansion around Re c to derive analytical expressions for the statistics of the fluctuating lift force. Molecular-level simulations using the direct simulation Monte Carlo method support the theoretical predictions of the lift power spectrum and amplitude distribution. Notably, we have been able to collect sufficient statistics at distances Re ⁡/ Re c – 1 = O ⁡(10 –3 ) from the instability that confirm the appearance of non-Gaussian fluctuations, and we observe that they are associated with intermittent vortex shedding. These results emphasize how unavoidable thermal-noise-induced fluctuations become dramatically amplified in the vicinity of oscillatory flow instabilities and that their onset is fundamentally stochastic.

42 ENGINEERING↗

Active Fluids Form System-Spanning Filamentary Networks

Recent experimental realizations of liquid-liquid phase separation of active liquid crystals have offered an insight into the interaction between phase separation, ubiquitous in soft matter and biology, and chaotic active flows. Here, in this Letter, we use continuum theory to examine phase separation of an active liquid crystal and a passive fluid and report two new results. First, we provide an analytical derivation of the activity-induced suppression of the phase boundary of the coexistence region—a result first reported in simulations and experiments. We show that the shift in the critical point is a result of the balance between self-stirring active flows and phase-separating diffusive fluxes. Second, we show that this same balance is responsible for dramatically changing the morphology of the phase separated state, resulting in the emergence of a new mixed active phase consisting of a dynamical filamentous active network that invades the entire system area, trapping droplets of passive material. This structure exists even for very low volume fractions of active material. Our work provides an important step towards the goal of understanding how to use activity as a new handle for sculpting interfaces.

active nematics↗

Sharp Page transitions in generic Hamiltonian dynamics

Here, we consider the entanglement dynamics of a subsystem initialized in a pure state at high energy density (corresponding to negative temperature) and coupled to a cold bath. The subsystem's Rényi entropies 𝑆 𝛼 first rise as the subsystem gets entangled with the bath and then fall as the subsystem cools. We find that the peak of the min-entropy, lim 𝛼→∞ ⁡𝑆 𝛼 , sharpens to a cusp in the thermodynamic limit at a well-defined time we call the Page time. We construct a hydrodynamic ansatz for the evolution of the entanglement Hamiltonian, which accounts for the sharp Page transition as well as the intricate dynamics of the entanglement spectrum before the Page time. Our results hold both when the bath has the same Hamiltonian as the system and when the bath is taken to be Markovian. Our ansatz suggests conditions under which the Page transition should remain sharp even for Rényi entropies of finite index 𝛼.

dynamical phase transitions↗

High-pressure melt dynamics in shock-compressed titanium

In this work we study the high-pressure melting behavior of titanium using laser-driven shock compression with in situ femtosecond x-ray diffraction and molecular-dynamics simulations based on a machine-learned interatomic potential. The MD simulations predict the solid-liquid coexistence on the Hugoniot in the ∼111−124GPa range. Experimentally, we observe the first evidence of liquid at 86 GPa. We also observe pronounced microstructural changes with pressure, with strong grain refinement associated with the emergence of liquid, within the solid-liquid coexistence (∼110−126GPa). Above 126 GPa, we observe the persistence of residual levels of highly textured crystalline Ti to ∼180GPa, well above the expected melt completion pressure. We discuss the accuracy that current laser-shock experimental platforms have at determining the melt onset and completion pressures.

36 MATERIALS SCIENCE↗

Efficient machine learning interatomic potentials robust for liquid and multiple solid polymorphs of NaF and KF

Achieving atomic-level understanding of crystallization of molten salts is of importance to a wide range of technological applications. Recent work [Fan et al., Proc. Natl. Acad. Sci. USA 122, e2425702122 (2025)] revealed that crystal nucleation in molten LiF salt is a multistage process according to the molecular-dynamics (MD) simulations based on an atomic cluster expansion (ACE) machine-learning interatomic potential (MLIP). In order to understand the influence of increasing cation size on nucleation pathways and nucleation rates of molten fluoride salts, here we develop two new ACE MLIPs for NaF and KF. The two ACE MLIPs feature DFT-SCAN-level accuracy for liquid and multiple solid polymorphs over a wide temperature (0–2000 K) and pressure (0–100 GPa) range, and also reproduce well a number of experimental data for solid and liquid equilibrium properties. The efficiency of the two ACE MLIPs enable million-atom-scale or microsecond-scale MD simulations. The two general-purpose ACE MLIPs are expected to be useful for atomistic simulations for different purposes, in addition to studying crystallization of molten NaF and KF salts.

Crystal melting↗

Realization and Calibration of Continuously Parameterized Two-Qubit Gates on a Trapped-Ion Quantum Processor

Continuously parameterized two-qubit gates are a key feature of state-of-the-art trapped-ion quantum processors, as they have favorable error scalings and show distinct improvements in circuit performance over more restricted maximally entangling gatesets. In this work, we provide a comprehensive and pedagogical discussion on how to practically implement these continuously parameterized Mølmer–Sørensen gates on the Quantum Scientific Computing Open User Testbed, a low-level trapped-ion processor. To generate the arbitrary entangling angles, θ, we simply scale the amplitude of light used to generate the entanglement. However, doing so requires careful consideration of amplifier saturation as well as the variable light shifts that result. As such, we describe a method to calibrate and cancel the dominant fourth-order effects, followed by a dynamic virtual phase advance during the gate to cancel any residual light shifts, and find a linear scaling between θ and the residual light shift. Once we have considered and calibrated these effects, we demonstrate performance improvement with decreasing θ. Finally, we describe nuances of hardware control to transform the XX-type interaction of the arbitrary-angle Mølmer–Sørensen gate into a phase-agnostic and crosstalk-mitigating ZZ interaction.

Yale, Christopher Gordon [Sandia National Laborato↗

PyPTkinetics

This basic research code computes the time-dependent phase transition between two solid crystalline phases under dynamic conditions.

Blaschke, Daniel N.↗

Phase II Final Technical Report: Dynamic Gamma-ray Imaging for In Vivo Tracking of Microelement Transport Across Plant-Microbial Systems

The Department of Energy Office of Biological and Environmental Research (DOE BER) Mesoscale to Molecules Bioimaging Technology Program aims to develop new imaging and measurement technology to enable in situ and dynamic imaging across a range of spatial and temporal scales. Various imaging modalities are required to span the complete spatiotemporal landscape for bioenergy and environmental bioimaging needs. The high-resolution gamma-ray spectroscopy, imaging, and sensitivity of new high-purity germanium (HPGe) instruments provide a unique opportunity to complement and enhance these research goals. The HPGe-based Gamma-ray Imager for Plant Research (GIPR) developed here provides non-invasive, in vivo measurements to dynamically track the uptake and distribution of multiple gamma-emitting radioactive elements simultaneously as they move from the soil microbiome into living plants. The hand portable GIPR utilizes commercially available radioisotopes to provide spatial and temporal imaging of plant microelement exchange for the broader scientific community.

Kiser, Matthew↗

Langevin Dynamics modeling of gas-phase ion-ion recombination (Final Technical Report)

A self-consistent trajectory simulation approach to model MN reactions (Fig. 1) which incorporates the probability of electron transfer as a Monte Carlo operator (Fig. 2) was developed and published as Liu et al. J. Chem. Phys. 159, 114111 (2023). The electron transfer probability p ET estimated using the two-state Landau-Zener (LZ) theory was incorporated into classical trajectory simulations to elicit predictions of MN reaction cross-section σ (vacuum) or rate constant β (finite pressure). Electronic structure calculations with multireference configuration interaction (MRCI) and large correlation consistent basis sets were used to derive inputs to the LZ theory. The key advance of our trajectory simulation approach is the incorporation of electron transfer probability and the inclusion of the effect of ion-neutral interactions on MN using a Langevin representation of the effect of neutral gas on ions. For H + – H - and Li + – H(D) - pairs, our approach quantitatively agrees with measured speed-dependent cross-sections for up to ~10 5 m/s. For the ion pair Ne + – Cl - , our predictions of the MN rate constant at ~1 torr are a factor of ~2 – 3 higher than the experimentally measured value. Similarly, for Xe + – F - in the pressure range of ~20000 – 80000 Pa, our predictions of the MN rate constant are ~20% lower but are in excellent qualitative agreement with experimental data. The paradigm of using trajectory simulations to self-consistently model MN reactions is the basis for inclusion of additional non-classical, and static magnetic and electric field effects. Subsequent work, published as Roy et al. focused on modeling recombination rate constant for three ion pairs (rare gas Ar + cation and halide anions): Ar + – Cl - , Ar + – Br - , Ar + – I - , 2) considering spin-orbit couplings in the electronic structure calculations to obtain high-fidelity estimates of the electron transfer probability and incorporated within the classical trajectory simulations to elicit predictions. In addition to calculations of ion-ion recombination rate constants, a classical trajectory simulation technique (published as Roy et al. J. Chem. Phys. 162(9), 094104 (2023)) that uses quaternions to represent orientation of non-spherical particles (ions or aerosol particles) was developed to simulate the recombination of diatomic or more generally, polyatomic molecules. Finally, several other ion pairs such as Ne + – Cl - , Kr + – Cl - , were explored using the developed semi-classical trajectory simulations to understand various challenges in tackling electronic structure calculations. Using empirical approaches to parameterize the electron transfer radius, trajectory simulations were also used to probe the effect of ion number density on MN rate constant.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interpretation of Ion Irradiation and Neutron Irradiation Damage in Additively Manufactured 316 Stainless Steel using Multiscale Modeling

The accelerated adoption of nuclear energy necessitates advanced manufacturing technologies, such as additive manufacturing, to meet heightened supply chain requirements and support innovative reactor technologies. Due to the unique microstructural characteristics of additively manufactured materials under distinct solidification conditions, comprehensive evaluation of their performance in reactor environments is essential. The Advanced Materials and Manufacturing Technologies program under the Department of Energy's Office of Nuclear Energy focuses on understanding the irradiation performance and damage evolution of laser powder bed fusion 316 stainless steel, with an emphasis on integrating ion and neutron irradiation data to accelerate the development and qualification of materials for advanced nuclear reactor applications. While ion irradiation is a cost- and time-effective method, modeling and simulation are required to interpret the data for the broader range of irradiation conditions encountered in advanced reactors. In fiscal year 2025, integrated multiscale modeling and simulations were conducted to assess irradiation damage in additively manufactured 316 stainless steel. Key outcomes include predictions of chromium enrichment at grain boundaries, nickel enrichment at dislocation cell walls and void surfaces, and heterogeneous void evolution under ion and neutron irradiation conditions. Cluster dynamics simulations revealed the coarsening of voids at high irradiation temperatures and the suppression of void growth by high network dislocation density, while also demonstrating significant growth and coarsening of voids and self-interstitial atom loops at low dose rates. Machine learning-accelerated atomistic simulations highlighted the impact of the local environment and chromium concentration on vacancy diffusivity, providing key insights on the influence of composition on void swelling and radiation-induced segregation. Additionally, molecular dynamics simulations demonstrated the presence of defect production bias and a significant effect of carbon content on defect cluster behavior. These combined efforts aim to predict the performance of additively manufactured materials under various reactor conditions, supporting their qualification for nuclear reactor applications by interpreting ion irradiation data. This report underscores the potential of integrated multiscale modeling to analyze ion irradiation data in the effort to accelerate the qualification of additively manufactured materials for nuclear reactor components.

316 stainless steel↗