Search NASA⌕ Search

SEARCH · Search NASA

Results for “EFFECTIVE MASS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

A survey of mass-loss effects in early-type stars

Intermediate-resolution data obtained with the Copernicus satellite are surveyed in order to define the region in the H-R diagram where mass loss occurs. The survey includes 40 stars, providing good coverage of supergiants from O4 to A2 and main-sequence stars from O4 to B7 as well as spotty coverage of late O giants and intermediate to late B stars. The spectral transitions examined are primarily resonance lines of ions of abundant elements plus some lines arising from excited states (e.g., C III at 1175.7 A and Si IV at 1122.5 A). Observed P Cygni profiles are discussed along with interesting features of some individual profiles. The data are shown to indicate that mass-loss effects occur over a wide portion of the H-R diagram, that mass ejection generally occurs when the holometric magnitude is greater than -6.0, and that the mass-ejection rate is usually high enough to produce P Cygni profile whenever the N V feature at 1240 A is present in a spectrum.

Snow, T. P., Jr.↗

Electron-hole compensation effect between topologically trivial electrons and nontrivial holes in NbAs

In this study, via angular Shubnikov–de Haas (SdH) quantum oscillations measurements, we determine the Fermi surface topology of NbAs, a Weyl semimetal candidate. The SdH oscillations consist of two frequencies corresponding to two Fermi surface extrema: 20.8 T (α pocket) and 15.6 T (β pocket). The analysis, including a Landau fan plot, shows that the β pocket has a Berry phase of π and a small effective mass of ~ 0.033 m 0 , indicative of a nontrivial topology in momentum space, whereas the α pocket has a trivial Berry phase of 0 and a heavier effective mass of ~ 0.066 m 0 . From the effective mass and the β -pocket frequency, we determine that the Weyl node is 110.5 meV from the chemical potential. An electron-hole compensation effect is discussed in this system, and its impact on magnetotransport properties is addressed. Finally, the difference between NbAs and other monopnictide Weyl semimetals is also discussed.

36 MATERIALS SCIENCE↗

Preheating after multifield inflation with nonminimal couplings. III. Dynamical spacetime results

This paper concludes our semianalytic study of preheating in inflationary models comprised of multiple scalar fields coupled nonminimally to gravity. Using the covariant framework of paper I in this series, we extend here the rigid-spacetime results of paper II by considering both the expansion of the Universe during preheating, as well as the effect of the coupled metric perturbations on particle production. The adiabatic and isocurvature perturbations are governed by different effective masses that scale differently with the nonminimal couplings and evolve differently in time. The effective mass for the adiabatic modes is dominated by contributions from the coupled metric perturbations immediately after inflation. The metric perturbations contribute an oscillating tachyonic term that enhances an early period of significant particle production for the adiabatic modes, which ceases on a time scale governed by the nonminimal couplings ${{\xi}}_{I}$. The effective mass of the isocurvature perturbations, on the other hand, is dominated by contributions from the fields' potential and from the curvature of the field-space manifold (in the Einstein frame), the balance between which shifts on a time scale governed by ${{\xi}}_{I}$. As in papers I and II, we identify distinct behavior depending on whether the nonminimal couplings are small [${{\xi}}_{I}{\lesssim}\mathcal{O}(1)$], intermediate [${{\xi}}_{I}{\sim}\mathcal{O}(1{-}10)$], or large (${{\xi}}_{I}{\ge}100$).

79 ASTRONOMY AND ASTROPHYSICS↗

Advantages of an indirect semiconductor quantum well system for infrared detection

The infrared intersubband absorption process in quantum well systems with anisotropic bulk effective masses, which usually occurs in indirect semiconductors was analyzed. It is found that the anisotropic effective mass can be utilized to provide allowed intersubband transitions at normal incidence to the quantum well growth direction. This transition is known to be forbidden for cases of isotropic effective mass. This property can be exploited for infrared sensor application of quantum well structures by allowing direct illumination of large surface areas without using special waveguide structures. The 10-micron intersubband absorption in quantum wells made of the silicon-based system Si/Si(1-x)Ge(x) was calculated. It is found that it is readily possible to achieve an absorption constant of the order of 10,000/cm in these Si quantum wells with current doping technology.

Yang, Chan-Lon↗

The Effect of Mass Distribution on the Lateral Stability and Control Characteristics of an Airplane as Determined by Tests of a Model in the Free-Flight Tunnel

The effects of mass distribution on lateral stability and control characteristics of an airplane have been determined by flight tests of a model in the NACA free-flight tunnel. In the investigation, the rolling and yawing movements of inertia were increased from normal values to values up to five times normal. For each moment-of-inertia condition, combinations of dihedral and vertical-tail area representing a variety of airplane configurations were tested. The results of the flight tests of the model were correlated with calculated stability and control characteristics and, in general, good agreement was obtained. The tests showed the following effects of increased rolling and yawing moments of inertia: no appreciable change in spiral stability; reductions in oscillatory stability that were serious at high values of dihedral; a reduction in the sensitivity of the model to gust disturbances; and a reduction in rolling acceleration provided by the ailerons, which caused a marked increase in time to reach a given angle of bank. The general flight behavior of the model became worse with increasing moments of inertia but, with combinations of small effective dihedral and large vertical-tail area, satisfactory flight characteristics were obtained at all moment-of-inertia conditions.

STABILITY & CONTROL, LATERAL↗

The Effect of Mass Distribution on the Lateral Stability and Control Characteristics of an Airplane as Determined by Tests of a Model in the Free-flight Tunnel

The effects of mass distribution on lateral stability and control characteristics of an airplane have been determined by flight tests of a model in the NACA free-flight tunnel. In the investigation, the rolling and yawing moments of inertia were increased from normal values to values up to five times normal. For each moment-of-inertia condition, combinations of dihedral and vertical-tail area representing a variety of airplane configurations were tested. The results of the flight tests of the model were correlated with calculated stability and control characteristics and, in general, good agreement was obtained.

Campbell, John P↗

First-principles investigation of metal-doped cubic BaTiO{sub 3}

Highlights: • Electronic properties of metal-doped cubic BaTiO{sub 3} are studied by DFT calculations. • Most transition-metal doping can effectively reduce the band gap of BaTiO{sub 3}. • The effective mass can be reduced by doping BaTiO{sub 3} with metals. • Substituting Ti with Fe or Mo could improve the photoelectric properties of BaTiO{sub 3}. - Abstract: The electronic properties of metal-doped cubic BaTiO{sub 3} have been investigated using first-principles calculations. Through systematic analysis on effects of various metals doping through substituting Ti with the main group, 3d and 4d transitions metal atoms, we show that most transition metal doping can effectively reduce the band gap of BaTiO{sub 3}. The partial density of states analysis indicates that different doping elements have different effects on the band-gap engineering. The effective mass of BaTiO{sub 3} before and after doping was further analyzed. And we found that the hole effective mass apparently decrease after Fe, Cu, Zn, Mo, and Ag doping, which could lead to increase of hole mobility and charge transfer enhancement. The calculation results showed that substituting Ti with Fe or Mo would be more effective for improving the photoelectric property of BaTiO{sub 3}. Our theoretical calculations provide useful insights and beneficial guidance into experimental study of BaTiO{sub 3} in the photoelectric applications.

36 MATERIALS SCIENCE↗

Searching for promising new perovskite-based photovoltaic absorbers: the importance of electronic dimensionality

Searching for promising nontoxic and air-stable perovskite absorbers for solar cell applications has drawn extensive attention. Here, we show that a promising perovskite absorber should exhibit a high electronic dimensionality. Semiconductors that exhibit a high structural dimensionality, but a low electronic dimensionality have less promise as an absorber, because of barriers to isotropic current flow, enhanced electron/hole effective masses and fundamentally deeper defect states (more effective at causing recombination). Our concept accounts for the device performance of the perovskite-based solar cells reported in literature so far.

Xiao, Zewen↗

Band or Polaron: The Hole Conduction Mechanism in the p-Type Spinel Rh 2ZnO4

Given the emerging role of oxide spinels as hole conductors, we discuss in this article the traditional vs. new methodologies of determining the type of conduction mechanism at play - localized polaronic vs. band-like transport. Applying (i) traditional small polaron analysis to our in-situ high temperature four-point conductivity and thermopower measurements, we previously found an activated mobility, which is indicative of the small polaron mechanism. However, (ii) employing the recent developments in correcting density functional methodologies for hole localization, we predict that the self-trapped hole is unstable and that Rh{sub 2}ZnO{sub 4} is instead a band conductor with a large effective mass. The hole mobility measured by high-field room temperature Hall effect also suggests band rather than polaron conduction. The apparent contradiction between the conclusion of the traditional procedure (i) and first-principles theory (ii) is resolved by taking into account in the previous transport analysis the temperature dependence of the effective density of states, which leads to the result that the mobility is actually temperature-independent in Rh{sub 2}ZnO{sub 4}. Our case study on Rh{sub 2}ZnO{sub 4} illustrates the range of experimental and theoretical approaches at hand to determine whether the transport mechanism of a semiconductor is band or small polaron conduction.

14 SOLAR ENERGY↗

Mass transfer effects in a gasification riser

In the development of multiphase reacting computational fluid dynamics (CFD) codes, a number of simplifications were incorporated into the codes and models. One of these simplifications was the use of a simplistic mass transfer correlation for the faster reactions and omission of mass transfer effects completely on the moderate speed and slow speed reactions such as those in a fluidized bed gasifier. Another problem that has propagated is that the mass transfer correlation used in the codes is not universal and is being used far from its developed bubbling fluidized bed regime when applied to circulating fluidized bed (CFB) riser reactors. These problems are true for the major CFD codes. To alleviate this problem, a mechanistic based mass transfer coefficient algorithm has been developed based upon an earlier work by Breault et al. This fundamental approach uses the local hydrodynamics to predict a local, time varying mass transfer coefficient. The predicted mass transfer coefficients and the corresponding Sherwood numbers agree well with literature data and are typically about an order of magnitude lower than the correlation noted above. The incorporation of the new mass transfer model gives the expected behavior for all the gasification reactions evaluated in the paper. At the expected and typical design values for the solid flow rate in a CFB riser gasifier an ANOVA analysis has shown the predictions from the new code to be significantly different from the original code predictions. The new algorithm should be used such that the conversions are not over predicted. Additionally, its behaviors with changes in solid flow rate are consistent with the changes in the hydrodynamics.

20 FOSSIL-FUELED POWER PLANTS↗

Near field fluid coupling between internal motion of the organ of Corti and the basilar membrane

The pressure distribution in each of the fluid chambers of the cochlea can be decomposed into a 1D, or plane wave, component and a near field component, which decays rapidly away from the excitation point. The transverse motion of the basilar membrane, BM, for example, generates both a 1D pressure field, which couples into the slow wave, and a local near field pressure, proportional to the BM acceleration, that generates an added mass on the BM due to the fluid motion. When the organ of Corti, OC, undergoes internal motion, due for example to outer hair cell activity, this motion will not itself generate any 1D pressure if the OC is incompressible and the BM is constrained not to move volumetrically, and so will not directly couple into the slow wave. This motion will, however, generate a near field pressure, proportional to the OC acceleration, which will act on the OC and thus increases its effective mass. The near field pressure due to this OC motion will also act on the BM, generating a force on the BM proportional to the acceleration of the OC, and thus create a “coupling mass” effect. By reciprocity, this coupling mass is the same as that acting on the OC due to the motion of the BM. This near field fluid coupling is initially observed in a finite element model of a slice of the cochlea. These simulations suggest a simple analytical formulation for the fluid coupling, using higher order beam modes across the width of the cochlear partition. It is well known that the added mass due to the near field pressure dominates the overall mass of the BM, and thus significantly affects the micromechanical dynamics. This work not only quantifies the added mass of the OC due its own motion in the fluid, and shows that this is important, but also demonstrates that the coupling mass effect between the BM and OC significantly affects the dynamics of simple micromechanical models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

FEEDBACK EFFECTS ON LOW-MASS STAR FORMATION

Protostellar feedback, both radiation and bipolar outflows, dramatically affects the fragmentation and mass accretion from star-forming cores. We use ORION, an adaptive mesh refinement gravito-radiation-hydrodynamics code, to simulate low-mass star formation in a turbulent molecular cloud in the presence of protostellar feedback. We present results of the first simulations of a star-forming cluster that include both radiative transfer and protostellar outflows. We run four simulations to isolate the individual effects of radiation feedback and outflow feedback as well as the combination of the two. We find that outflows reduce protostellar masses and accretion rates each by a factor of three and therefore reduce protostellar luminosities by an order of magnitude. This means that, while radiation feedback suppresses fragmentation, outflows render protostellar radiation largely irrelevant for low-mass star formation above a mass scale of 0.05 M{sub Sun }. We find initial fragmentation of our cloud at half the global Jeans length, around 0.1 pc. With insufficient protostellar radiation to stop it, these 0.1 pc cores fragment repeatedly, forming typically 10 stars each. The accretion rate in these stars scales with mass as predicted from core accretion models that include both thermal and turbulent motions; the accretion rate does not appear to be consistent with either competitive accretion or accretion from an isothermal sphere. We find that protostellar outflows do not significantly affect the overall cloud dynamics, in the absence of magnetic fields, due to their small opening angles and poor coupling to the dense gas. The outflows reduce the mass from the cores by 2/3, giving a core to star efficiency, {epsilon}{sub core} {approx_equal} 1/3. The simulations are also able to reproduce many observation of local star-forming regions. Our simulation with radiation and outflows reproduces the observed protostellar luminosity function. All of the simulations can reproduce observed core mass functions, though we find they are sensitive to telescope resolution. We also reproduce the two-point correlation function of these observed cores. Lastly, we reproduce the initial mass function itself, including the low-mass end, when outflows are included.

79 ASTRONOMY AND ASTROPHYSICS↗

Degenerate limit thermodynamics beyond leading order for models of dense matter

Analytical formulas for next-to-leading order temperature corrections to the thermal state variables of interacting nucleons in bulk matter are derived in the degenerate limit. The formalism developed is applicable to a wide class of non-relativistic and relativistic models of hot and dense matter currently used in nuclear physics and astrophysics (supernovae, proto-neutron stars and neutron star mergers) as well as in condensed matter physics. We consider the general case of arbitrary dimensionality of momentum space and an arbitrary degree of relativity (for relativistic models). For non-relativistic zero-range interactions, knowledge of the Landau effective mass suffices to compute next-to-leading order effects, but for finite-range interactions, momentum derivatives of the Landau effective mass function up to second order are required. Results from our analytical formulas are compared with the exact results for zero- and finite-range potential and relativistic mean-field theoretical models. In all cases, inclusion of next-to-leading order temperature effects substantially extends the ranges of partial degeneracy for which the analytical treatment remains valid. Effects of many-body correlations that deserve further investigation are highlighted.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Semiconductor-to-Metal Transition and Quasiparticle Renormalization in Doped Graphene Nanoribbons

A semiconductor-to-metal transition in N = 7 armchair graphene nanoribbons causes drastic changes in its electron and phonon system. In this paper, by using angle-resolved photoemission spectroscopy of lithium-doped graphene nanoribbons, a quasiparticle band gap renormalization from 2.4 to 2.1 eV is observed. Reaching high doping levels (0.05 electrons per atom), it is found that the effective mass of the conduction band carriers increases to a value equal to the free electron mass. This giant increase in the effective mass by doping is a means to enhance the density of states at the Fermi level which can have palpable impact on the transport and optical properties. Electron doping also reduces the Raman intensity by one order of magnitude, and results in relatively small (4 cm -1 ) hardening of the G phonon and softening of the D phonon. This suggests the importance of both lattice expansion and dynamic effects. Finally, the present work highlights that doping of a semiconducting 1D system is strikingly different from its 2D or 3D counterparts and introduces doped graphene nanoribbons as a new tunable quantum material with high potential for basic research and applications.

36 MATERIALS SCIENCE↗

Electronic structures of [001]- and [111]-oriented InSb and GaSb free-standing nanowires

We report on a theoretical study of the electronic structures of InSb and GaSb nanowires oriented along the [001] and [111] crystallographic directions. The nanowires are described by atomistic, tight-binding models, including spin-orbit interaction. The band structures and the wave functions of the nanowires are calculated by means of a Lanczos iteration algorithm. For the [001]-oriented InSb and GaSb nanowires, the systems with both square and rectangular cross sections are considered. Here, it is found that all the energy bands are doubly degenerate. Although the lowest conduction bands in these nanowires show good parabolic dispersions, the top valence bands show rich and complex structures. In particular, the topmost valence bands of the nanowires with a square cross section show a double maximum structure. In the nanowires with a rectangular cross section, this double maximum structure is suppressed, and the top valence bands gradually develop into parabolic bands as the aspect ratio of the cross section is increased. For the [111]-oriented InSb and GaSb nanowires, the systems with hexagonal cross sections are considered. It is found that all the bands at the Γ-point are again doubly degenerate. However, some of them will split into non-degenerate bands when the wave vector moves away from the Γ-point. Although the lowest conduction bands again show good parabolic dispersions, the topmost valence bands do not show the double maximum structure. Instead, they show a single maximum structure with its maximum at a wave vector slightly away from the Γ-point. The wave functions of the band states near the band gaps of the [001]- and [111]-oriented InSb and GaSb nanowires are also calculated and are presented in terms of probability distributions in the cross sections. It is found that although the probability distributions of the band states in the [001]-oriented nanowires with a rectangular cross section could be qualitatively described by one-band effective mass theory, the probability distributions of the band states in the [001]-oriented nanowires with a square cross section and the [111]-oriented nanowires with a hexagonal cross section show characteristic patterns with symmetries closely related to the irreducible representations of the relevant double point groups and, in general, go beyond the prediction of a simple one-band effective mass theory. We also investigate the effects of quantum confinement on the band structures of the [001]- and [111]-oriented InSb and GaSb nanowires and present an empirical formula for the description of quantization energies of the band edge states in the nanowires, which could be used to estimate the enhancement of the band gaps of the nanowires as a result of quantum confinement. The size dependencies of the electron and hole effective masses in these nanowires are also investigated and discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermoelectric properties of antiperovskite calcium oxides Ca{sub 3}PbO and Ca{sub 3}SnO

We report the thermoelectric properties of polycrystalline samples of Ca{sub 3}Pb{sub 1−x}Bi{sub x}O (x = 0, 0.1, 0.2) and Ca{sub 3}SnO, both crystallizing in a cubic antiperovskite-type structure. The Ca{sub 3}SnO sample shows metallic resistivity and its thermoelectric power approaches 100 μV K{sup −1} at room temperature, resulting in the thermoelectric power factor of Ca{sub 3}SnO being larger than that of Ca{sub 3}Pb{sub 1−x}Bi{sub x}O. On the basis of Hall and Sommerfeld coefficients, the Ca{sub 3}SnO sample is found to be a p-type metal with a carrier density of ∼10{sup 19 }cm{sup −3}, a mobility of ∼80 cm{sup 2} V{sup −1} s{sup −1}, both comparable to those in degenerated semiconductors, and a moderately large hole carrier effective mass. The coexistence of moderately high mobility and large effective mass observed in Ca{sub 3}SnO, as well as possible emergence of a multivalley electronic structure with a small band gap at low-symmetry points in k-space, suggests that the antiperovskite Ca oxides have strong potential as a thermoelectric material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Passive assay of plutonium metal plates using a fast-neutron multiplicity counter

Here, we developed a fast-neutron multiplicity counter based on organic scintillators (EJ-309 liquid and stilbene). The system detects correlated photon and neutron multiplets emitted by fission reactions, within a gate time of tens of nanoseconds. The system was used at Idaho National Laboratory to assay a variety of plutonium metal plates. A coincidence counting strategy was used to quantify the 240 Pu effective mass of the samples. Coincident neutrons, detected within a 40-ns coincidence window, show a monotonic trend, increasing with the 240 Pu-effective mass (in this work, we tested the 0.005–0.5 kg range). After calibration, the system estimated the 240 Pu effective mass of an unknown sample ( 240 Pu eff >50 g) with an uncertainty lower than 1% in a 4-min assay time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electron Transport and Band Structure in Phosphorus-Doped Polycrystalline Silicon Films

We study transport mechanisms, effective mass, and band structure by measuring the resistivity, Hall, and Seebeck and Nernst coefficients in heavily phosphorus-doped polycrystalline silicon films made by thermal crystallization of amorphous silicon. We observe a change in transport mechanism which results in an increase in electron mobility from 10% to 80% of the single-crystal silicon mobility as the carrier concentration increases from 10{sup 19} to 10{sup 20} cm{sup -3}. Our measurements of effective mass at the Fermi level indicate that as the carrier concentration increases, there is a shift from impurity-band transport to conduction-band transport, and that the electron effective mass is lower in the impurity band than in the conduction band of Si. The shift to conduction-band transport improves electron mobility with carrier density by improving intragrain carrier mean free path lengths and relaxation times.

14 SOLAR ENERGY↗