Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Elastic properties of Apollo 14 and 15 rocks.

Ultrasonic P- and S-wave velocities of lunar samples 14310,72 and 15418,43 and P-wave velocities of sample 15015,18 were measured at room temperature to 5 kb confining pressure. The velocities of both igneous and breccia samples increased sharply over this pressure range. At low confining pressures, the shape of velocity-pressure curves of rocks is determined by the distribution function of crack aspect ratios. We suggest that analogue studies on terrestrial rocks having a wide assortment of crack parameters may be used to infer the nature of cracks in lunar rocks.

Todd, T.↗

Elastic properties of plagioclase aggregates and seismic velocities in the moon

The compressional velocities of Apollo 16 gabbroic anorthosites in which the cracks have been closed match the seismic velocity of 7 km/sec in the 25 to 65 km depth region of the moon beneath the Imbrium Basin. The intrinsic velocities of plagioclase aggregates indicate that a velocity of 7 km/sec in a highly calcic gabbroic anorthosite is consistent only with a very small pyroxene component. Because mare basalts and gabbroic-anorthosites both have intrinsic velocities of 7 km/sec, the laboratory velocity data do not require a compositional change from basalt to anorthosite at the 25 km discontinuity. The laboratory velocity data only imply that the 25 km seismic discontinuity is one of microcrack density. The physical rather than the chemical or mineralogical state is constrained.

Wang, H.↗

Elastic properties and fracture strength of quasi-isotropic graphite/epoxy composites

The layups of the studied laminates are (0, + or - 60) sub s, (0, + or - 45, 90) sub s, (0, + or - 30, + or - 60, 90) sub s (0, + or - 22 1/2, + or - 45, + or - 67 1/2, 90) sub s. The properties determined were tensile modulus, Poisson's ratio, bending stiffness, fracture strength and fracture strain. Measured properties and properties predicted using laminate theory were found to be in reasonable agreement. Reasons for data scatter were determined.

Sullivan, T. L.↗

Tensile Elastic Properties of Typical Stainless Steels and Nonferrous Metals as Affected by Plastic Deformation and by Heat Treatment

A general discussion is given of the relationships between stress, strain, and permanent set. From stress-set curves are derived proof stresses based on five different percentages of permanent set. The influence of prior plastic extension on these values is illustrated and discussed. A discussion is given of the influence of work-hardening, rest interval, and internal stress on the form of the proof stress-extension curve.

Mcadam, D J↗

Radial variation of elastic properties of SCS-6 silicon carbide fiber

The upper and lower bounds of the bulk, shear, and Young's moduli are calculated point-by-point along the radius of SCS-6 silicon carbide fibers using the Hashin-Shtrikman equations from considerations of the Auger spectra along the fiber radius. The calculated values are in agreement with measurements of the average Young modulus obtained over relatively large radial regions of the fiber using scanning acoustic microscopy (SAM). The validity of the Hashin-Shtrikman bounds calculations is enhanced by the agreement found between experimental SAM V(z) curves for fixed z along the fiber radius and the theoretical bounds of such curves obtained from the bounds of the calculated bulk and shear moduli.

Sathish, Shamachary↗

Radial Variation of Elastic Properties of SCS-6 Silicon Carbide Fiber

The upper and lower bounds of the bulk, shear, and Young's moduli are calculated point-by-point along the radius of SCS-6 silicon carbide fibers using the Hashin-Shtrikman equations from considerations of the Auger spectra along the fiber radius. The calculated values are in agreement with measurements of the average Young modulus obtained over relatively large radial regions of the fiber using scanning acoustic microscopy (SAM). The validity of the Hashin-Shtrikman bounds calculations is enhanced by the agreement found between experimental SAM V(z) curves for fixed z along the fiber radius and the theoretical bounds of such curves obtained from the bounds of the calculated bulk and shear moduli.

Sathish, Shamachary↗

Elastic Properties of Films of Water and Noble Gases Condensed at Low Temperatures

We have shown that there are extensive similarities between the quench-condensed noble gas films and those of amorphous water ice. In particular, both can be quite soft upon deposition and can stiffen considerably when annealed. Furthermore, this stiffening follows a logarithmic time dependence for all substances. The temperature dependence of these behaviors scales with the triple point. The results shown here show a strong thickness dependence, which has implications for any study of mechanical properties of films on substrates. The temperature dependence of the stiffening and the stiffening rate have now been characterized for the noble gases, and these observations provide a roadmap for new experiments on amorphous water ice.

Pohl, Robert O.↗

The Effects of Parachute System Mass and Suspension-Line Elastic Properties on the LADT #3 Viking Parachute Inflation Load

Analytical calculations have considered the effects of 1) varying parachute system mass, 2) suspension-line damping, and 3) alternate suspension-line force-elongation data on the canopy force history. Results indicate the canopy force on the LADT #3 parachute did not substantially exceed the recorded vehicle force reading and that the above factors can have significant effects on the canopy force history. Analytical calculations have considered the effects of i) varying parachute system mass, 2) suspension line damping, and 3) different suspension-line force-elongation data on the canopy force history. Based on the results of this study the following conclusions are drawn: Specifically, 1. At the LADT #3 failure time of 1.70 seconds, the canopy force ranged anywhere from 15.7% below to 2.4% above the vehicle force depending upon the model and data used. Therefore, the canopy force did not substantially exceed the recorded vehicle force reading. 2. At a predicted full inflation time of 1.80 seconds the canopy force would be greater than the vehicle force by from 1.1% to 10.6%, again depending upon the model and data used. Generally, 3. At low altitudes, enclosed and apparent air mass can significantly effect the canopy force calculated and should, therefore, not be neglected. 4. The canopy force calculations are sensitive to decelerator physical properties. In this case changes in the damping and/or force-elongation characteristics produced significant changes in the canopy force histories. Accurate prediction of canopy force histories requires accurate inputs in these areas.

Talay, Theodore A.↗

Measuring the Thickness and Elastic Properties of Electroactive Thin-Film Polymers Using Platewave Dispersion Data

Electroactive thin-film polymers are candidate sensors and actuators materials. They are also finding significant potential in muscle mechanisms and microelectromechanical systems (MEMS). In these applications, polymer thin films of thickness varying between 20 and 300 micrometers are utilized. The authors are currently studying the potential use of platewave dispersion curve measurements as an effective gauging tool for electroactive thin-film polymers.

sensors actuators film thickness measurements piez↗