SEARCH · Search NASA

Results for “ELECTROMAGNETIC MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Programmable low-coherence wavefronts for enhanced localization

Engineering the properties of electromagnetic wavefronts has become essential to imaging, wireless security, sensing, and wireless communication. In particular, wavefronts that exhibit low spatial coherence can enable sensing functionalities with high accuracy and low latency. The typical use of such wavefronts cannot take advantage of these possibilities, as they require the ability to dynamically reconfigure the wavefront in a controllable and repeatable fashion, over a broad spectral bandwidth. Here, we propose a new approach for generating broadband reconfigurable wavefronts which not only exhibit low spatial coherence at a particular frequency, but are also decorrelated with the wavefronts simultaneously generated at other frequencies. We demonstrate that this frequency-domain decorrelation is a key feature that, in combination with dynamic reconfigurability, enables localization measurements with an order-of-magnitude improvement in accuracy compared to the state of the art.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Dielectric and magnetic properties of microwave-absorbing FeAl x O y catalysts fabricated via solution combustion synthesis

Iron-based alumina (FeAl x O y ) nanocomposites are microwave-absorbers and catalysts, which makes them promising for emerging microwave-assisted thermocatalytic technologies. Solution combustion synthesis (SCS) has been used to synthesize FeAl x O y powders, and prior work has demonstrated that adjusting SCS parameters significantly changes phase composition and specific surface area of the products. However, it is unclear how synthesis parameters affect their microwave-absorbing properties, which are essential for optimizing microwave-assisted technologies. To address this challenge, in the present work, twelve different FeAl x O y products were synthesized at different combinations of the SCS parameters such as two fuels (citric acid and glycine), two heating modes (hotplate and muffle furnace), and three Fe:Al molar ratios (2:1, 1:1, 1:2). Dielectric and magnetic properties of the products were characterized using a network analyzer and a vibrating sample magnetometer. Based on the measured permittivity and permeability, penetration depth and reflection loss were calculated as a function of frequency and bed thickness. The products were heated by microwaves at 2.45 GHz and then examined with X-ray diffraction (XRD) analysis. For all products, the magnetic saturation was lower than for bulk iron oxides because of the small crystallite size and aluminum substitution. The use of glycine induced high dielectric losses and enabled fast microwave-heating rates compared to citric acid. Higher Fe:Al ratio also led to higher dielectric and magnetic losses. With glycine fuel, SCS in a furnace induced larger penetration depth and lower microwave absorption than SCS on a hotplate. The minimization of reflected power was more sensitive to the thickness of the product bed than to the frequency of the electromagnetic field. Post-heating XRD analysis revealed different phase transformations in the FeAl x O y powders depending on the SCS parameters. As a result, an FeAl x O y material, synthesized via incipient wetness impregnation, lacked magnetic losses and did not heat well as compared to the SCS products.

Combustion synthesis↗

DOE OSTI2024

Dynamical ejecta from binary neutron star mergers: Impact of a small residual eccentricity and of the equation of state implementation

Predicting the properties of the matter ejected during and after a neutron star merger is crucial to our ability to use electromagnetic observations of these mergers to constrain the masses of the neutron stars, the equation of state of dense matter, and the role of neutron star mergers in the enrichment of the Universe in heavy elements. Furthermore, our ability to reliably provide such predictions is however limited by a broad range of factors, including the finite resolution of numerical simulations, their treatment of magnetic fields, neutrinos, and neutrino-matter interactions, and the approximate modeling of the equation of state of dense matter. In this manuscript, we study specifically the role that a small residual eccentricity and different implementations of the same equation of state have on the matter ejected during the merger of a 1.3M ⊙ –1.4M ⊙ binary neutron star system. We find that a residual eccentricity e ~ 0.01, as measured ~ 4–6 orbits before merger, causes O(25%–30%) changes in the amount of ejected mass, mainly due to changes in the amount of matter ejected as a result of core bounces during merger. We note that O(1%) residual eccentricities have regularly been used in binary neutron star merger simulations as proxy for circular binaries, potentially creating an additional source of error in predictions for the mass of the dynamical ejecta.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

High-angular-momentum Rydberg states in a room-temperature vapor cell for dc electric-field sensing

We prepare and analyze Rydberg states with orbital quantum numbers ℓ ≤ 6 using three-optical-photon electromagnetically induced transparency (EIT) and radio frequency (rf) dressing, and employ the high- ℓ states in electric-field sensing. Rubidium-85 atoms in a room-temperature vapor cell are first promoted into the 25 F 5 / 2 state via Rydberg-EIT with three infrared laser beams. Two rf dressing fields then (near-)resonantly couple the 25 F , 25 H ( ℓ = 5 ) , and 25 I ( ℓ = 6 ) Rydberg states. The dependence of the rf-dressed Rydberg-state level structure on rf powers, rf and laser frequencies is characterized using EIT. Furthermore, we discuss the principles of dc-electric-field sensing using high- ℓ Rydberg states and experimentally demonstrate the method using test electric fields of ≲ 50 V/m induced via photo-illumination of the vapor-cell wall. We measure the highly nonlinear dependence of the dc-electric-field strength on the power of the photo-illumination laser. Numerical calculations, which reproduce our experimental observations well, elucidate the underlying physics. Our paper is relevant to high-precision spectroscopy of high- ℓ Rydberg states, Rydberg-atom-based electric-field sensing, and plasma electric-field diagnostics. Published by the American Physical Society 2024

Duspayev, Alisher (ORCID:0000000153225762)↗

DOE OSTI2024

Extracting the femtometer structure of strange baryons using the vacuum polarization effect

Abstract One of the fundamental goals of particle physics is to gain a microscopic understanding of the strong interaction. Electromagnetic form factors quantify the structure of hadrons in terms of charge and magnetization distributions. While the nucleon structure has been investigated extensively, data on hyperons are still scarce. It has recently been demonstrated that electron-positron annihilations into hyperon-antihyperon pairs provide a powerful tool to investigate their inner structure. We present a method useful for hyperon-antihyperon pairs of different types which exploits the cross section enhancement due to the effect of vacuum polarization at theJ/ψresonance. Using the 10 billionJ/ψevents collected with the BESIII detector, this allows a precise determination of the hyperon structure function. The result is essentially a precise snapshot of the$$\bar{\Lambda }{\Sigma }^{0}\,(\Lambda {\bar{\Sigma }}^{0})$$ Λ ¯ Σ 0 ( Λ Σ ¯ 0 ) transition process, encoded in the transition form factor ratio and phase. Their values are measured to beR = 0.860 ± 0.029(stat.) ± 0.015(syst.),$$\Delta {\Phi }_{\bar{\Lambda }{\Sigma }^{0}}=(1.011\pm 0.094({{\rm{stat.}}})\pm 0.010({{\rm{syst.}}}))\,{{\rm{r}}}ad$$ Δ Φ Λ ¯ Σ 0 = ( 1.011 ± 0.094 ( stat. ) ± 0.010 ( syst. ) ) r a d and$$\Delta {\Phi }_{\Lambda {\bar{\Sigma }}^{0}}=(2.128\pm 0.094({{\rm{stat.}}})\pm 0.010({{\rm{syst.}}}))\,{{\rm{r}}}ad$$ Δ Φ Λ Σ ¯ 0 = ( 2.128 ± 0.094 ( stat. ) ± 0.010 ( syst. ) ) r a d . Furthermore, charge-parity (CP) breaking is investigated in this reaction and found to be consistent with CP symmetry.

Science & Technology - Other Topics↗

DOE OSTI2026

Identification and denoising of radio signals from cosmic-ray air showers using convolutional neural networks

Radio pulses generated by cosmic-ray air showers can be used to reconstruct key properties like the energy and depth of the electromagnetic component of cosmic-ray air showers. Radio detection threshold, influenced by natural and anthropogenic radio background, can be reduced through various techniques. In this work, we demonstrate that convolutional neural networks (CNNs) are an effective way to lower the threshold. We developed two CNNs: a classifier to distinguish radio signal waveforms from background noise and a denoiser to clean contaminated radio signals. Following the training and testing phases, we applied the networks to air-shower data triggered by scintillation detectors of the prototype station for the enhancement of IceTop, IceCube’s surface array at the South Pole. Over a four-month period, we identified 554 cosmic-ray events in coincidence with IceTop, approximately five times more compared to a reference method based on a cut on the signal-to-noise ratio. Comparisons with IceTop measurements of the same air showers confirmed that the CNNs reliably identified cosmic-ray radio pulses and outperformed the reference method. Additionally, we find that CNNs reduce the false-positive rate of air-shower candidates and effectively denoise radio waveforms, thereby improving the accuracy of the power and arrival time reconstruction of radio pulses.

Abbasi, R↗

DOE OSTI2024

Computational prediction of dielectric breakdown strength of a transformer paper in oil with uncertainty quantification

The determination of the dielectric breakdown strengths of microstructurally heterogeneous materials has been a primarily experimental endeavor. We report the development of a microstructure-level model for computationally predicting the breakdown strength and analyzing the interactions between electromagnetic pulses (EMP) and the constituents in a composite of cellulose-based paper and mineral oil found in electrical transformers. The model allows explicit simulation of the material breakdown process by tracking the transition of dielectric constituents from non-conductive to conductive states. The focus is on the electric fields induced in the materials and the overall conditions for dielectric breakdown (defined as the onset of avalanche) caused by the electric field induced in the composite. Responses to three distinct pulse shapes, i.e., Steep Front (SF), Lightning (L), and AC with spectra spanning 60–9 × 105 Hz are considered. It is found that the breakdown strength of the material is significantly affected by microstructure heterogeneities, the spatial variations of the constituent properties, and the pulse shapes. A probabilistic characterization of the breakdown strength is computationally obtained and compared with experimental measurements. Although one particular material is analyzed, the model and approach are applicable to other heterogeneous materials as well.

breakdowns↗

DOE OSTI2025

Emerging tension between isospin symmetry and nuclear deformation at 𝐴 = 78

Since the nuclear interaction is, to first order, isospin independent, simple relationships can be derived for 𝐸⁢2 strengths across isobaric analog states within an isobaric triplet. At the same time, there is a well-known relationship between the 2 + excitation energy and the 𝐵(𝐸⁢2;2 + → 0 + ) transition strength in deformed even-even nuclei. Here, we highlight a tension between these two trends in the 𝐴 = 78 isobaric triplet. Recent level-energy determinations indicate that the proton-rich member of the triplet, 78 Zr, is strongly deformed while recent lifetime measurements in 78 Sr and 78 Y, as extrapolated into 78 Zr, would imply that 78 Zr is weakly deformed. Furthermore, we explore the implications of this apparent contradiction and explore potential solutions.

59 ≤ A ≤ 89↗

DOE OSTI2025

The Dynamic Networks Experiments: Virtual Experiments to Quantify Gains in Nuclear Explosion Monitoring

We describe an ongoing series of virtual experiments conducted collaboratively by four United States National Laboratories: Sandia National Laboratories, Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and Pacific Northwest National Laboratory. These Dynamic Network Experiments (DNEs) provide an experimental framework to evaluate the potential impact of new research tools on nuclear explosion monitoring. The second DNE (DNE2), completed in 2024, exploited waveform data (seismic, infrasound, and electromagnetic) that was recorded by multi-modal sensors within and near the Nevada National Security Site and synthetic radionuclide signatures over multiple time periods. During the execution of DNE2, we processed and analyzed data through a multi-stage event processing pipeline that ingested raw data, performed quality control, detected signals, built events from these signals, located these events, and characterized the events’ source types and sizes. For each stage and over the entire event processing pipeline, we evaluated performance changes by comparing the performance of new data processing methods, models, and algorithms against a baseline. We also performed an additional execution phase to assess event processing pipeline function, speed, and efficiency against that of an expert analyst, including computational and manual efforts. Finally, we assessed the impact and effort of modern computing infrastructure on the monitoring pipeline. This paper describes key elements of the DNEs, from formulation through execution, as demonstrated in DNE2. The DNEs introduce several novel concepts to quantitatively measure the potential impact of new methods on explosion monitoring, including the collaborative design of multi-modal datasets, performance and logistical metrics, and integrated analyses.

42 ENGINEERING↗

DOE OSTI2024

The Jefferson Lab Eta Factory Experiment and Applications of PbWO4 Calorimeters in Future Experimental Facilities

The goal of the new JLab Eta Factory (JEF) experiment, conducted with the GlueX detector in Hall D at Jefferson Lab, is to perform measurements of various ¿(') decays with a primary focus on rare neutral modes. The experiment’s physics program ranges from precision tests of low-energy QCD to searches for gauge bosons with masses below 1 GeV that could couple the Standard Model (SM) sector to the dark sector. The experiment will collect a high-statistics data sample of ¿(') mesons produced via a beam of tagged photons. The GlueX detector features a large, nearly uniform acceptance for both neutral and charged particles, enabling efficient identification of complex multi-particle final states. To meet the requirements of the JEF experiment, the inner section of the forward lead-glass calorimeter in the GlueX detector has been upgraded with lead tungstate (PbWO4) scintillating crystals. PbWO4 offers exceptional characteristics, such as a small radiation length and Molire radius, and large light yield, that make it ideal for constructing high- granularity, high-resolution, radiation-hard detectors. These properties enable excellent spatial separation and energy resolution of reconstructed electromagnetic showers, establishing PbWO4 as the material of choice for many high-precision experiments. The JEF experiment began data collection in April 2025 and will operate concurrently with the GlueX experiment, whose primary objective is the search for gluonic excitations in the meson spectrum. I will give an overview of the JEF experiment, the GlueX detector, and the feasibility of further upgrades to support future ¿ physics studies. Special attention will be given to the newly constructed PbWO4 scintillating calorimeter and recent advancements in calorimeter instrumentation.

Somov, Alexander↗

DOE OSTI2025

DOE SCGSR Final Report - Project Accomplishments and Additional Materials

The major accomplishments of my project were successfully developing and testing the laser interferometry diagnostic on the Plasma Liner Experiment (PLX) at Los Alamos National Laboratory (LANL). This diagnostic helped advance my research by providing a simpler way to obtain electron density measurements of magnetized plasmas compared to other electron density diagnostics such as triple Langmuir probes. The laser used was a 561 nm continuous wave (CW) diode-pumped solid state (DPSS) laser. The PLX laser interferometry diagnostic consists of two parts. These include the launching and receiving sides of the laser diagnostic. The launching side consists of the main laser beam from the DPSS laser being split into five chords(probe beams) and a reference beam which are then directed with fiber optic couplers into fiber optic cables which transmit the probe beamsto the PLX vacuum chamber. The probe beams then pass through the plasma in the chamber and into the receiving side optics where they are again directed through fiber optic cables to be combined with the reference beam. The combined beams are transmitted via multi-mode fiber optic cables to photodiodes to convert the light signals into electrical signals. Before the electrical signals get digitized, they pass through bandpass and low pass filters to eliminate electromagnetic noise and unwanted frequencies. The electrical signals are then processed by IQ demodulators to determine phase angle difference between the probe and reference beams for each chord in order to calculate line-integrated electron density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Millimeter-Wave Superconducting Qubit

Manipulating the electromagnetic spectrum at the single-photon level is fundamental for quantum experiments. In the visible and infrared ranges, this can be accomplished with atomic quantum emitters, and with superconducting qubits such control is extended to the microwave range (below 10 GHz). Meanwhile, the region between these two energy ranges presents an unexplored opportunity for innovation. We bridge this gap by scaling up a superconducting qubit to the millimeter-wave range (near 100 GHz). Working in this energy range greatly reduces sensitivity to thermal noise compared to microwave devices, enabling operation at significantly higher temperatures, up to 1 K. This has many advantages by removing the dependence on rare 3⁢ He for refrigeration, simplifying cryogenic systems, and providing orders-of-magnitude higher cooling power, lending the flexibility needed for novel quantum sensing and hybrid experiments. Using low-loss niobium trilayer junctions, we realize a qubit at 72 GHz cooled to 0.87 K using only 4 ⁢He. We perform Rabi oscillations to establish control over the qubit state, and measure relaxation and dephasing times of 15.8 and 17.4 ns, respectively. This demonstration of a millimeter-wave quantum emitter offers exciting prospects for enhanced sensitivity thresholds in high-frequency photon detection, provides new options for quantum transduction and for scaling up and speeding up quantum computing, enables integration of quantum systems where 3 ⁢He refrigeration units are impractical, and, importantly, paves the way for quantum experiments exploring a novel energy range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

𝐵⁡(𝐸⁢2) measurements in the yrast band of 28 Mg: Implications for the 𝑁 = 20 island of inversion

High-precision lifetime measurements in 28 Mg were performed to study neutron shell evolution in Mg isotopes and the onset of the N = 20 island of inversion. Here, using both the recoil distance and Doppler shift attenuation methods, five lifetimes were measured in addition to six upper limits. The observation of two long-lived, negative-parity states demonstrate the importance of studying Mg isotopes for the contribution of intruder configurations to sd-shell nuclei. Lifetimes of the $2^+_1$ and $4^+_1$ states of 1.81(5) ps and 172⁢($^{+11}_{–10}$) stat.⁢ (4) stop. ⁢(8) feed.⁢ (4) targ. fs, respectively, demonstrate a loss of collectivity with increasing spin in the yrast band, permitting for distinguishing between current theoretical models. These measurements also highlight the progression of yrast structure across the Mg isotopic chain from rotational at N = 12 to large shape mixing at N = 16 and back to collective behavior at N = 20 but with dominating intruder configurations.

20 ≤ A ≤ 38↗

DOE OSTI2025

(Un)Explained EMIC Waves: Understanding Quiet Time EMIC Wave Drivers

Electromagnetic ion cyclotron (EMIC) waves are known to be generated through cyclotron resonance with the local ion particle population and grow when there is a large enough temperature anisotropy. In general, these temperature anisotropies necessary for wave growth are found to be associated with either solar wind pressure pulses or particle injections during geomagnetic storms or substorms. However, some EMIC events do not show any clear association with these known drivers and appear unexplained. In our analysis of high-amplitude (>1 nT) non-storm time EMIC waves, we find that 24 out of the 223 (~11%) EMIC events with peak amplitude greater than 1 nT were not found to be associated with any clear EMIC wave driver. This raises a compelling question: What magnetospheric or solar wind driver provides the free energy to grow these quiet-time EMIC waves? Here, we examine two EMIC events on 13 April 2017 and 13 February 2014, which were excited during extremely quiet solar wind and geomagnetic conditions. Furthermore, an in-depth analysis of field and particle measurements from multiple data sets, including ground and in situ data for these two events, indicates that extremely weak and otherwise insignificant pressure values and/or very weak substorm injections occurring multiple hours before the event play a significant role in quiet time wave generation.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Proton and neutron contributions to the quadrupole transition strengths in 39 Ca and 39 K studied by lifetime measurements of mirror transitions

The E2 transition matrix elements of isobaric multiplets are expected to follow a linear trend as a function of isospin projection. However, measurements of the 2 + → 0 + transitions in the A = 38 triplet of Ca, K, and Ar show a deviation from this trend with an enhanced transition strength in 38 Ca with respect to its mirror 38 Ar. We have studied analogue 11/2 – → 7/2 – E2 transitions in 39 Ca and its mirror partner 39 K to determine if this enhancement persists in neighboring Ca isotopes. Recoil-distance lifetime measurements of 39 Ca and 39 K were performed utilizing a 42 Sc secondary beam, the TRIPLEX plunger, the GRETINA array, and the S800 spectrograph. Our data provide a lifetime measurement of the (11/2 – ) state in 39 Ca as well as an improved lifetime result for the (9/2 – ) state, while the 39 K data are used to validate the present analysis. Furthermore, a comparison of the present data to shell-model calculations suggests an enhanced transition strength in 39 Ca, pointing to both proton and neutron contributions to core excitations across the Z = N = 20 shell gaps in close proximity to 40 Ca.

39 ≤ A ≤ 58↗

DOE OSTI2025

Measurement of the 175 Hf half-life

Hafnium-175 is a useful radioisotope for numerous applications; however, its evaluated half-life (70 ± 2 days) has a large uncertainty. To enable a new measurement of the half-life, 175 Hf was produced via proton irradiation of natural lutetium and chemically purified. The 175 Hf sample was counted approximately once a month with three high-purity germanium detectors for 13 months (~5.5 half-lives). A 133 Ba standard was counted in an identical manner to quantify systematic uncertainties over the measurement period. In conclusion, the measured 175 Hf half-life is 69.90 ± 0.07 days, in agreement with the evaluated value, but with significantly reduced uncertainty.

150 ≤ A ≤ 189↗

DOE OSTI2024

Characterization of a CMOS camera based film digitization platform for gated x-ray imaging diagnostics at the National Ignition Facility

Hardened gated x-ray detectors use photographic film as the data recording medium due to its low sensitivity to the high-yield neutron environments at the National Ignition Facility (NIF). The photographic film is digitized with a Photometric Data Systems (PDS) microdensitometer, which measures the film’s optical density. The PDS scanner is able to measure a dynamic range of 0–5 OD; however, raster scanning the film is time consuming and maintenance of the instrument is challenging due to legacy technology. Since film usage at NIF is expected to continue in the foreseeable future, a digitization platform that is faster and more maintainable would benefit the NIF’s current and future operations. Here, this work presents the characterization of the digital transitions (DT) atom, a CMOS camera-based digitization platform that records film data in a single image capture very quickly and has widely available user support. The preliminary results suggest that the DT atom is able to reconstruct exposures accurately enough to be a competitive alternative to the PDS Scanner.

47 OTHER INSTRUMENTATION↗

DOE OSTI2025

In-Field Testing of Components for Feedback and Control of the ITER Disruption Mitigation System

Here, the shattered pellet injection (SPI) method has been chosen as the disruption mitigation system (DMS) for ITER. To protect the device from plasma disruptions that cause damaging heat and electromagnetic loads, SPI is used to inject high-Z material into the plasma. The process of SPI utilizes cryogenic cooling to form solid pellets. Pellets are accelerated down a barrel and into an angled surface, causing the pellet to shatter prior to entering the tokamak chamber. For the DMS to function reliably, the 27 separate shattered pellet injectors planned for ITER must rely on many components to provide accurate feedback data and for control functions. Each component in the DMS is exposed to an elevated background magnetic field depending on its placement and proximity to the plasma chamber. A Helmholtz coil test stand that is operated at Oak Ridge National Laboratory was utilized to test the components in relevant background field levels to assess component performance. This paper details the test design and results for in-field component operation for a variety of components. This list includes the following components: two different network switches for camera connectivity, a VAT fast shutter valve intended to reduce the flow of SPI propellant gas into the torus, a solenoid control valve intended for use in the pellet formation process, pressure/vacuum switches to be used for feedback and control, a printed circuit board piezo pressure sensor to be used to measure breech pressure, and various relays for the high-voltage pulsed power supply used to drive the SPI propellant valve.

Disruption mitigation↗