Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRON EMISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Oblique-incidence secondary emission from charged dielectronics

Experimental measurements and computer simulation of secondary electron emission coefficients for FEP-Teflon, for normal and oblique incidence in the presence of a normal electric field are reported. Knowledge of the electrostatic environment surrounding the specimen calculation of particle trajectories are considered. A simulation using a conformal mapping, a Green's integral, and a trajectory generator provides the necessary mathematical support for the measurements which have been made with normal fields of 1.5 and 2.7 kV/mm. When incidence is normal and energy exceeds the critical energy, the coefficient is given by V.58 and for oblique incidence this expression may be divided by the cosine of the angle. The parameter V sub 0 is a function of normal field. Measurements for values of V sub f are presented.

Robinson, J. W.↗

Medium-resolution studies of extreme ultraviolet emission from N2 by electron impact - Vibrational perturbations and cross sections of the c4-prime 1Sigma(+)u and b-prime 1Sigma(+)u states

In a crossed-beam experiment the electron-impact-induced fluorescence spectrum of N2 in the extreme ultraviolet is studied at a spectral resolution of up to 0.03 nm. The optically thin experiment obtained the highest-resolution electron-impact emission spectrum of the Rydberg and valence states of N2. The spectral measurements provide the emission cross sections of each of the vibrational transitions of the Carroll-Yoshino and the Birge-Hopfield-II band systems. Laboratory vibrational-excitation cross sections arising from the mutual perturbation of the c4-prime 1Sigma(+)u and b-prime 1Sigma(+)u states by homogeneous configuration interactions are measured from 10 to 400 eV, and a modified Born approximation analytic model is given for them. The analysis leads to accurate band-system oscillator strengths. The relative emission and excitation cross sections each of the vibrational levels are compared. In addition, low-resolution measurements of the cross section of the atomic dissociation fragments (NI, NII, NIII) from 40 to 102 nm are made, and medium-resolution measurements are made of the emission cross section of the c4 1Pi(u), c5-prime 1Sigma(+)u, c5 1Pi(u), and c6-prime 1Sigma(+)u to X 1Sigma(+)g (0,0) transitions.

Ajello, Joseph M.↗

Diverse Electron-Induced Optical Emissions from Space Observatory Materials at Low Temperatures

Electron irradiation experiments have investigated the diverse electron-induced optical and electrical signatures observed in ground-based tests of various space observatory materials at low temperature. Three types of light emission were observed: (i); long-duration cathodoluminescence which persisted as long as the electron beam was on (ii) short-duration (<1 s) arcing, resulting from electrostatic discharge; and (iii) intermediate-duration (~100 s) glow-termed "flares". We discuss how the electron currents and arcing-as well as light emission absolute intensity and frequency-depend on electron beam energy, power, and flux and the temperature and thickness of different bulk (polyimides, epoxy resins, and silica glasses) and composite dielectric materials (disordered SiO2 thin films, carbon- and fiberglass-epoxy composites, and macroscopically-conductive carbon-loaded polyimides). We conclude that electron-induced optical emissions resulting from interactions between observatory materials and the space environment electron flux can, in specific circumstances, make significant contributions to the stray light background that could possibly adversely affect the performance of space-based observatories.

long-duration cathodoluminescence↗

Summary of nondestructive testing theory and practice

The ability to fabricate design critical and man-rated aerospace structures using materials near the limits of their capabilities requires a comprehensive and dependable assurance program. The quality assurance program must rely heavily on nondestructive testing methods for thorough inspection to assess properties and quality of hardware items. A survey of nondestructive testing methods is presented to provide space program managers, supervisors and engineers who are unfamiliar with this technical area with appropriate insight into the commonly accepted nondestructive testing methods available, their interrelationships, used, advantages and limitations. Primary emphasis is placed on the most common methods: liquid penetrant, magnetic particle, radiography, ultrasonics and eddy current. A number of the newer test techniques including thermal, acoustic emission, holography, microwaves, eddy-sonic and exo-electron emission, which are beginning to be used in applications of interest to NASA, are also discussed briefly.

Meister, R. P.↗

Observations of exoelectron emission associated with heterogeneous catalysis

It is suggested that the exoelectron emission from the catalyst may be used to monitor the rate of oxidation of CO and CH4 over palladium catalysts. Indirect heating of the catalyst and atmospheric pressure have no effect upon this monitoring system. Although the mechanism relating catalysis to exoelectron emission is not clear, it is considered possible that electron emission is triggered by the adsorption-desorption cycle.

Hoenig, S. A.↗

Characterization of Individual Aerosol Particles Associated with Clouds (CRYSTAL-FACE)

The aim of our research was to obtain data on the chemical and physical properties of individual aerosol particles from near the bottoms and tops of the deep convective systems that lead to the generation of tropical cirrus clouds and to provide insights into the particles that serve as CCN or IN. We used analytical transmission electron microscopy (ATEM), including energy-dispersive X-ray spectrometry (EDS) and electron energy-loss spectroscopy (EELS), and field-emission electron microscopy (FESEM) to compare the compositions, concentrations, size distributions, shapes, surface coatings, and degrees of aggregation of individual particles from cloud bases and the anvils near the tropopause. Aggregates of sea salt and mineral dust, ammonium sulfate, and soot particles are abundant in in-cloud samples. Cirrus samples contain many H2SO4 droplets, but acidic sulfate particles are rare at the cloud bases. H2SO4 probably formed at higher altitudes through oxidation of SO2 in cloud droplets. The relatively high extent of ammoniation in the upper troposphere in-cloud samples appears to have resulted from vertical transport by strong convection. The morphology of H2SO4 droplets indicates that they had been at least yartiy ammoniated at the time of collection. They are internally mixed with organic materials, metal sulfates, and solid particles of various compositions. Ammoniation and internal mixing of result in freezing at higher temperature than in pure H2SO4 aerosols. K- and S-bearing organic particles and Si-Al-rich particles are common throughout. Sea salt and mineral dust were incorporated into the convective systems from the cloud bases and worked as ice nuclei while being vertically transported. The nonsulfate particles originated from the lower troposphere and were transported to the upper troposphere and lower stratosphere.

Buseck, Peter R.↗

Solar Wind Access to Lunar Polar Craters: Feedback Between Surface Charging and Plasma Expansion

Determining the plasma environment within permanently shadowed lunar craters is critical to understanding local processes such as surface charging, electrostatic dust transport, volatile sequestration, and space weathering. In order to investigate the nature of this plasma environment, the first two-dimensional kinetic simulations of solar wind expansion into a lunar crater with a self-consistent plasma-surface interaction have been undertaken. The present results reveal how the plasma expansion into a crater couples with the electrically-charged lunar surface to produce a quasi-steady wake structure. In particular, there is a negative feedback between surface charging and ambipolar wake potential that allows an equilibrium to be achieved, with secondary electron emission strongly moderating the process. A range of secondary electron yields is explored, and two distinct limits are highlighted in which either surface charging or ambipoiar expansion is responsible for determining the overall wake structure.

Zimmerman, M. I.↗

Materials Characterization at Utah State University: Facilities and Knowledge-base of Electronic Properties of Materials Applicable to Spacecraft Charging

In an effort to improve the reliability and versatility of spacecraft charging models designed to assist spacecraft designers in accommodating and mitigating the harmful effects of charging on spacecraft, the NASA Space Environments and Effects (SEE) Program has funded development of facilities at Utah State University for the measurement of the electronic properties of both conducting and insulating spacecraft materials. We present here an overview of our instrumentation and capabilities, which are particularly well suited to study electron emission as related to spacecraft charging. These measurements include electron-induced secondary and backscattered yields, spectra, and angular resolved measurements as a function of incident energy, species and angle, plus investigations of ion-induced electron yields, photoelectron yields, sample charging and dielectric breakdown. Extensive surface science characterization capabilities are also available to fully characterize the samples in situ. Our measurements for a wide array of conducting and insulating spacecraft materials have been incorporated into the SEE Charge Collector Knowledge-base as a Database of Electronic Properties of Materials Applicable to Spacecraft Charging. This Database provides an extensive compilation of electronic properties, together with parameterization of these properties in a format that can be easily used with existing spacecraft charging engineering tools and with next generation plasma, charging, and radiation models. Tabulated properties in the Database include: electron-induced secondary electron yield, backscattered yield and emitted electron spectra; He, Ar and Xe ion-induced electron yields and emitted electron spectra; photoyield and solar emittance spectra; and materials characterization including reflectivity, dielectric constant, resistivity, arcing, optical microscopy images, scanning electron micrographs, scanning tunneling microscopy images, and Auger electron spectra. Further details of the instrumentation used for insulator measurements and representative measurements of insulating spacecraft materials are provided in other Spacecraft Charging Conference presentations. The NASA Space Environments and Effects Program, the Air Force Office of Scientific Research, the Boeing Corporation, NASA Graduate Research Fellowships, and the NASA Rocky Mountain Space Grant Consortium have provided support.

Dennison, J. R.↗

The effect of comet Shoemaker-Levy 9 on Jupiter's synchrotron radiation

Solid material from comet Shoemaker-Levy 9 is expected to modify Jupiter's decimetric radio emission. Electrons passing through dust grains suffer a degradation in their energy, while larger sized material absorbs all electrons impinging on it. If there is enough dust and/or larger sized material in the magnetosphere, the effect on the energetic electrons can be observed via their synchrotron radiation, emitted at microwave frequencies. The planet's radio emission is expected to decrease, and the presence of dust induces a hardening in the radio spectrum. We expect the intensity to decrease immediately after cometary material enters the radiation belts; the radio emission continues to drop for many months as electrons diffuse inwards through a dusty magnetosphere. Radio observations of the planet during and after the cometary impact thus yield information on the amount of cometary material (optical depth of the dust and macroscopic material), impacts between cometary material and Jupiter's ring, and the diffusion process of energetic electrons through the magnetosphere.

De Pater, Imke↗

Fundamental and harmonic electron cyclotron maser emission

The plasma conditions and features of the energetic electron distribution in electron cyclotron maser emission for which growth in a particular mode is favored when the ratio of the plasma frequency omega(p) to the electron cyclotron frequency Omega(e) is greater than about 0.3 are determined. It is shown that growth at the fundamental is suppressed as omega(p)/Omega(e) increases and emission at harmonics of Omega(e) dominates. Growth at harmonics of Omega(e) is not restricted to the O and X modes, but can also occur for the Z mode. Whether or not growth in a particular mode dominates depends both on omega(p)/Omega(e) and on the form of the distribution. If the density of the energetic electrons is sufficiently large, the dispersion relations of the O and X modes are modified so that the group velocities of the growing O and X mode waves can be comparable to that of the growing Z mode waves.

Winglee, R. M.↗

Charge-Carrier-Scattering Spectroscopy With BEEM

Ballistic-electron-emission microscopy (BEEM) constitutes basis of new spectroscopy of scattering of electrons and holes. Pointed tip electrode scans near surface of metal about 100 angstrom thick on semiconductor. Principle similar to scanning tunneling microscope, except metal acts as third electrode. Used to investigate transport phenomena, scattering phenomena, and creation of hot charge carriers in Au/Si and Au/GaAs metal/semiconductor microstructures.

Hecht, Michael H.↗

Electron cyclotron maser emission at oblique angles

Possible causes of observations of electron cyclotron maser emissions (ECMEs) at oblique angle (about 60 deg) to the magnetic field are investigated. The paper discusses general concepts of ECME in terms of resonant ellipses and considers electron distributions required to produce ECME at oblique angles, as well as the ways in which the most favorable of these distributions may be produced. A mechanism is proposed that might produce an appropriate 'spiraling beam' distribution, with a peak in velocity space at speed v - v(0) and pitch angle alpha = alpha(0) not equal to 0.

Melrose, D. B.↗

The UV photochemistry of C2N2

The absorption, emission, and photodissociation yield spectra of C2N2 were measured in the 220 and 210 nm region near the 4(0)1 and 1(0)1 4(0)1 bands of the A 1 sigma + from the X 1 sigma + system. The emission spectrum showed very few lines which appeared in the absorption spectrum. Moreover, the emission had 660 ns lifetime and, at 210 nm a very large electronic emission quenching rate. Laser induced fluorescence was used to measure the relative yield of CN radicals as a function of photolysis wavelength. This spectrum seemed to follow the absorption spectrum below the dissociation threshold. Energy in the CN fragments appeared to be statistically distributed.

Halpern, Joshua B.↗

Deep Dielectric Charging of Spacecraft Polymers by Energetic Protons

The majority of research in the field of spacecraft charging concentrates on electron charging effects with little discussion of charging by protons. For spacecraft orbiting in the traditional LEO and GEO environments this emphasis on electrons is appropriate since energetic electrons are the dominant species in those orbits. But for spacecraft in orbits within the inner radiation belts or for interplanetary and lunar space probes, proton charging (center dot) effects may also be of concern. To examine bulk spacecraft charging effects in these environments several typical highly insulating spacecraft polymers were exposed to energetic protons (center dot) with energies from 1 Me V to lO Me V to simulate protons from the solar wind and from solar energetic proton events. Results indicate that effects in proton charged dielectrics are distinctly different than those observed due to electron charging. In most cases, the positive surface potential continued to increase for periods on the order of minutes to a day, followed by long time scale decay at rates similar to those observed for electron charging. All samples charged to positive potentials with substantially lower magnitudes than for equivalent electron doses. Possible explanations for the different behavior of the measured surface potentials from proton irradiation are discussed; these are related to the evolving internal charge distribution from energy dependent electron and proton transport, electron emission, charge migration due to dark current and radiation induced conductivity, and electron capture by embedded protons.

radiation induced conductivity↗

Matrix effects in ion-induced emission as observed in Ne collisions with Cu-Mg and Cu-Al alloys

Ion induced Auger electron emission is used to study the surfaces of Al, Mg, Cu - 10 at. % Al, Cu - 19.6 at. % Al, and Cu - 7.4 at. % Mg. A neon (Ne) ion beam whose energy is varied from 0.5 to 3 keV is directed at the surface. Excitation of the lighter Ne occurs by the promotion mechanism of Barat and Lichten in asymmetric collisions with Al or Mg atoms. Two principal Auger peaks are observed in the Ne spectrum: one at 22 eV and one at 25 eV. Strong matrix effects are observed in the alloys as a function of energy in which the population of the second peak is greatly enhanced relative to the first over the pure materials. For the pure material over this energy range this ratio is 1.0. For the alloys it can rise to the electronic structure of alloys and to other surface tools such as secondary ion mass spectroscopy.

Ferrante, J.↗