Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXAFS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Arsenate adsorption on ruthenium oxides: A spectroscopic and kinetic investigation

Arsenate adsorption on amorphous (RuO{sub 2} {center_dot} 1.1H{sub 2}O) and crystalline (RuO{sub 2}) ruthenium oxides was evaluated using spectroscopic and kinetic methods to elucidate the adsorption mechanism. Extended X-ray absorption fine structure spectroscopy (EXAFS) was used to determine the local coordination environment of adsorbed arsenate. Additionally, pressure-jump (p-jump) relaxation spectroscopy was used to investigate the kinetics of arsenate adsorption/desorption on ruthenium oxides. Chemical relaxations resulting from the induced pressure change were monitored via electrical conductivity detection. EXAFS data were collected for two initial arsenate solution concentrations, 3 and 33 mM at pH 5. The collected spectra indicated a similar coordination environment for arsenate adsorbed to RuO{sub 2} {center_dot} 1.1H{sub 2}O for both arsenate concentrations. In contrast the EXAFS spectra of RuO{sub 2} indicated differences in the local coordination environments for the crystalline material with increasing arsenate concentration. Data analysis indicated that both mono- and bidentate surfaces complexes were present on both RuO{sub 2} {center_dot} 1.1H{sub 2}O and RuO{sub 2}. Relaxation spectra from the pressure-jump experiments of both ruthenium oxides resulted in a double relaxation event. Based on the relaxation spectra, a two step reaction mechanism for arsenate adsorption is proposed resulting in the formation of a bidentate surface complex. Analysis of the kinetic and spectroscopic data suggested that while there were two relaxation events, arsenate adsorbed to ruthenium oxide surfaces through both mono- and bidentate surface complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of NpO 2+x in the binary Np-O system

In contrast to UO 2 and PuO 2 , there is no consensus on the existence of mixed valence NpO 2+x , resulting in a gap between NpO 2 and Np 2 O 5 (the highest binary oxide of Np) in the Np-O phase diagram. We now show NpO 2+x via Np L III Extended X-ray Absorption Fine Structure (EXAFS) spectra of three samples of NpO 2 that, analogous to U and Pu, exhibit multisite Np-O distributions with varying numbers of oxygen atoms at 1.87–1.91 Å. Furthermore this is supported by the diffraction pattern of the sample with the largest amount of this oxo-type species that can be refined with both the simple fluorite structure and a trigonal one related to α-U 4 O 9 . The implied Np(V)-bridging oxo moieties as well as possible indications of OH - found by detailed EXAFS analysis suggest that NpO 2+x more closely resembles PuO 2+x than UO 2+x . An additional common characteristic suggested by the EXAFS and X-Ray Diffraction (XRD) is the phase separation into NpO 2 and what would be previously unreported Np 4 O 9(-δ) , indicative of O clustering.

36 MATERIALS SCIENCE↗

Structure of AgI-doped Ge-In-S glasses: Experiment, reverse Monte Carlo modelling, and density functional calculations

We report an investigation of the structure and vibrational modes of Ge-In-S-AgI bulk glasses using X-ray diffraction, EXAFS spectroscopy, Reverse Monte-Carlo (RMC) modelling, Raman spectroscopy, and density functional theoretical (DFT) calculations. The combination of these techniques made it possible to elucidate the short- and medium-range structural order of these glasses. Data interpretation revealed that the AgI-free glass structure is composed of a network where GeS{sub 4/2} tetrahedra are linked with trigonal InS{sub 3/2} units; S{sub 3/2}Ge-GeS{sub 3/2} ethane-like species linked with InS{sub 4/2}{sup -} tetrahedra form sub-structures which are dispersed in the network structure. The addition of AgI into the Ge-In-S glassy matrix causes appreciable structural changes, enriching the Indium species with Iodine terminal atoms. The existence of trigonal species InS{sub 2/2}I and tetrahedral units InS{sub 3/2}I{sup -} and InS{sub 2/2}I{sub 2}{sup -} is compatible with the EXAFS and RMC analysis. Their vibrational properties (harmonic frequencies and Raman activities) calculated by DFT are in very good agreement with the experimental values determined by Raman spectroscopy. - Graphical abstract: Experiment (XRD, EXAFS, RMC, Raman scattering) and density functional calculations are employed to study the structure of AgI-doped Ge-In-S glasses. The role of mixed structural units as illustrated in the figure is elucidated. Highlights: Black-Right-Pointing-Pointer Doping Ge-In-S glasses with AgI causes significant changes in glass structure. Black-Right-Pointing-Pointer Experiment and DFT are combined to elucidate short- and medium-range structural order. Black-Right-Pointing-Pointer Indium atoms form both (InS{sub 4/2}){sup -} tetrahedra and InS{sub 3/2} planar triangles. Black-Right-Pointing-Pointer (InS{sub 4/2}){sup -} tetrahedra bond to (S{sub 3/2}Ge-GeS{sub 3/2}){sup 2+} ethane-like units forming neutral sub-structures. Black-Right-Pointing-Pointer Mixed chalcohalide species (InS{sub 3/2}I){sup -} offer vulnerable sites for the uptake of Ag{sup +}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of doping on global lattice properties of magnetite Fe{sub 3-x}Me{sub x}O{sub 4} (Me=Zn, Ti and Al)

X-ray powder diffraction was measured in Fe{sub 3-x}Me{sub x}O{sub 4} (Me=Zn, Ti, Al; x<0.065), in T range 70-300 K to see the effect of different doping on global lattice properties. The experimental results have shown that some lattice properties (e.g., the cell volume) are dopand specific. This can be attributed to the difference in preferential sites occupation by dopants. As confirmed by EXAFS, Zn enters tetrahedral, while Ti octahedral lattice sites, differently affecting crucial octahedral iron positions in the spinel lattice. However, despite this fact, it was found that T dependence of both monoclinic angle and lattice parameters is universal for studied samples above and below the Verwey transition temperature T{sub V}. So, not the iron atoms in octahedral positions individually, but interactions between them are responsible for the Verwey transition character change with doping. - Graphical abstract: A low temperature magnetite cell volume vs. dopants content. Apparently, Zn, Ti and Al atoms have different effect on the global lattice properties at individual temperatures. However, the Verwey transition reacts to dopants in a similar manner, despite the different way the octahedral iron positions are affected. Highlights: Black-Right-Pointing-Pointer We measure powder diffraction and EXAFS on Fe{sub 3-x}Me{sub x}O{sub 4}, Me=Zn, Ti, Al (x<0.065), in T range 70-300 K. Black-Right-Pointing-Pointer XRD: atom-type independent changes of lattice parameters with T. Black-Right-Pointing-Pointer EXAFS: Zn replaces Fe on tetrahedral positions, Ti on octahedral positions. Black-Right-Pointing-Pointer Thus, some secondary interactions between ordering orbitals, not the primary one driving the Verwey transition, control the transition order.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural investigation and luminescence of nanocrystalline lanthanide doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3}

Nd{sup 3+} and Eu{sup 3+} doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3} nanostructured multiferroics (nanoparticles or nanorods) were prepared by a sol-gel route. X-Ray powder diffraction results evidence that the sodium and mixed sodium-potassium niobates show orthorhombic (Pmc2{sub 1} space group), and monoclinic structure (Pm space group), respectively, confirmed by the Raman spectra. The local structure around the trivalent lanthanides was investigated with Extended X-ray Absorption Fine Structure spectroscopy at the Ln-K edge and luminescence spectroscopy. The Ln{sup 3+} ions enter the structure by substituting the alkali metals, with a 12-fold oxygen coordination, and inducing a large amount of static disorder. The visible emission bands of the Eu{sup 3+} ions indicate that multiple sites exist for the lanthanide ions, in agreement with the EXAFS results showing the largest amount of static disorder in these samples. A possible indication of clustering of oxygen vacancies around the Ln{sub Na} Double-Prime defect is obtained by VBS calculations. - Graphical Abstract: Ln{sup 3+} doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3} nanoparticles or nanorods can be prepared by a simple sol-gel procedure. The synergy of X-ray diffraction, EXAFS and luminescence spectroscopy gives important information on the Ln{sup 3+} local environment. Highlights: Black-Right-Pointing-Pointer Nd{sup 3+} and Eu{sup 3+} doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3} nanoparticles or nanorods are prepared by sol-gel. Black-Right-Pointing-Pointer EXAFS indicates that the Ln{sup 3+} ions substitutes the Na{sup +} and K{sup +} ions, inducing a large amount of static disorder. Black-Right-Pointing-Pointer The visible emission bands of the Eu{sup 3+} ions confirm that multiple sites exist for the lanthanide ions.

36 MATERIALS SCIENCE↗

In-situ X-ray absorption spectroscopy analysis of capacity fade in nanoscale-LiCoO{sub 2}

The local structure of nanoscale (∼10–40 nm) LiCoO{sub 2} is monitored during electrochemical cycling utilizing in-situ X-ray absorption spectroscopy (XAS). The high surface area of the LiCoO{sub 2} nanoparticles not only enhances capacity fade, but also provides a large signal from the particle surface relative to the bulk. Changes in the nanoscale LiCoO{sub 2} metal-oxide bond lengths, structural disorder, and chemical state are tracked during cycling by adapting the delta mu (Δμ) technique in complement with comprehensive extended X-ray absorption fine structure (EXAFS) modeling. For the first time, we use a Δμ EXAFS method, and by comparison of the difference EXAFS spectra, extrapolate significant coordination changes and reduction of cobalt species with cycling. This combined approach suggests Li–Co site exchange at the surface of the nanoscale LiCoO{sub 2} as a likely factor in the capacity fade and irreversible losses in practical, microscale LiCoO{sub 2}. - Graphical abstract: Electrochemical cycling of Li-ion batteries has strong impact on the structure and integrity of the cathode active material particularly near the surface/electrolyte interface. In developing a new method, we have used in-situ X-ray absorption spectroscopy during electrochemical cycling of nanoscale LiCoO{sub 2} to track changes during charge and discharge and between subsequent cycles. Using difference spectra, several small changes in Co-O bond length, Co-O and Co-Co coordination, and site exchange between Co and Li sites can be tracked. These methods show promise as a new technique to better understand processes which lead to capacity fade and loss in Li-ion batteries. - Highlights: • A new method is developed to understand capacity fade in Li-ion battery cathodes. • Structural changes are tracked during Li intercalation/deintercalation of LiCoO{sub 2}. • Surface structural changes are emphasized using nanoscale-LiCoO{sub 2} and difference spectra. • Full multiple scattering calculations are used to support Δμ analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The structure of nano-palladium deposited on carbon-based supports

Nano-palladium catalysts, prepared using the same procedure with the same metal content (3 wt%) and two different supports, activated carbon (Pd/C) and activated carbon—multiwalled carbon nanotubes (Pd/C/CNT), are discussed. The simple technique of deposition reduction was applied in the preparation of these two types of Pd catalysts. TEM, XRD analysis, EXAFS signal analysis, and XANES were used for sample characterization. In both samples, transmission electron microscopy identified nanosized Pd particles with nearly spherical morphology but different sizes. The mean diameters of the particles on Pd/C and Pd/C/CNT were estimated to be 5.4 nm and 7.8 nm, respectively. The EXAFS signal analysis showed that Pd atoms on the particle surfaces were coordinated by 4 oxygens to form a PdO monolayer covering a metallic core. The XANES signal analysis indicated a smaller particle size for Pd/C (∅ 5 nm) than for Pd/C/CNT (∅ 10 nm), in good agreement with the TEM observations. - Graphical abstract: Visualization of metallic core (left), oxide monolayer (middle) and nanoparticle of diameter 5 nm (right). - Highlights: • Pd catalysts were prepared on two types of supports: carbon and carbon nanotubes. • BET, TEM, XRD characterization of prepared catalysts. • XAFS: Concentration of Pd in samples Pd/C and Pd/C/CNT. • EXAFS and XANES signal analysis of catalysts. • Visualisation of atoms arrangement at the Pd nanoparticle surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Smaller Is Better: The Case for Lower-Order Iodoplumbate Species Dominating MAPbI 3 /Dimethylformamide Solutions

Here, using complementary experimental measurements and computational predictions of spectroscopic measurements (EXAFS, XANES, and UV–vis), we have determined the identity of the most stable iodoplumbate species in dilute lead halide perovskite precursor solutions. We have determined which species are most likely to be thermodynamically stable compared to others that are unstable or metastable. Condensed phase ab initio models were constructed, and the resulting ensembles were used to directly compare the computed signals to the experimental results of the EXAFS, XANES, and UV–vis spectra of PbI 2 :MAI in DMF. The results of this study suggest that only Pb 2+ , PbI + , and PbI 2 are dominant in the dilute lead perovskite precursor solutions as thermodynamically stable entities. Our interpretation of the relative stability of iodoplumbate species in solution, based on an analysis of EXAFS and XANES spectra, provides critically important new insight into the species most likely to be responsible for crystal nucleation and growth in these materials. This insight will have a significant consequence on the broad scientific community and will necessitate the reinterpretation of peaks in the UV–vis spectra of lead halide perovskite precursor solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic Contraction across the Lanthanide Series Decreases the Temperature-Induced Disorder of the Water Coordination Sphere

In liquid, temperature affects the structures of lanthanide complexes in multiple ways that depend upon complex interactions between ligands, anions, and solvent molecules. The relative simplicity of lanthanide aqua ions (Ln 3+ ) make them well suited to determine how temperature induces structural changes in lanthanide complexes. In this work, we performed a combination of ab initio molecular dynamics (AIMD) simulations and extended X-ray absorption fine structure (EXAFS) measurements, both at 25 and 90 °C, to determine how temperature affects the first- and second-coordination spheres of three Ln 3+ (Ce 3+ , Sm 3+ , and Lu 3+ ) aqua ions. AIMD simulations show first lanthanide coordination spheres that are similar at 25 and 90 °C, more so for the Lu 3+ ion that remains as eight-coordinate than for the Ce 3+ and Sm 3+ ions that change their preferred coordination number from nine (at 25 °C) to eight (at 90 °C). The measured EXAFS spectra are very similar at 25 and 90 °C, for the Ce 3+ , Sm 3+ , and Lu 3+ ions, suggesting that the dynamical disorder of the Ln 3+ ions in liquid water is sufficient such that temperature-induced changes do not clearly manifest changes in the structure of the three ions. Both AIMD simulations and EXAFS measurements show very similar structures of the first coordination sphere of the Lu 3+ ion at 25 and 90 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Determination of Speciation and Local Structure of NaCl–SrCl 2 and LiF–ZrF 4 Molten Salts

Understanding the local environment of the metal atoms in salt melts is important for modeling the properties of melts and predicting their behavior and thus helping enable the development of technologies such as molten salt reactors and solar-thermal power systems and new approaches to recycling rare-earth metals. Toward that end, we have developed an in situ approach for measuring the coordination of metals in molten salt coupling X-ray absorption spectroscopy (XAS) and Raman spectroscopy. Our approach was demonstrated for two salt mixtures (1.9 and 5 mol % SrCl 2 in NaCl, 0.8 and 5 mol % ZrF 4 in LiF) at up to 1100 °C. Near-edge (X-ray absorption near-edge structure, XANES) and extended X-ray absorption fine structure (EXAFS) spectra were measured. The EXAFS response was modeled using ab initio FEFF calculations. Strontium’s first shell is observed to be coordinated with chlorine (Sr 2+ –Cl – ) and zirconium’s first shell is coordinated by fluorine (Zr 4+ –F – ), both having coordination numbers that decrease with increasing temperature. Multiple zirconium complexes are believed to be present in the melt, which may interfere and distort the EXAFS spectra and result in an anomalously low zirconium first shell coordination number. Finally, the use of boron nitride (BN) powder as a salt diluent for XAFS measurements was found to not interfere with measurements and thus can be used for investigations of such systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Structures of the C185S and C185A Mutants of Sulfite Oxidase Reveal Rearrangement of the Active Site

Sulfite oxidase (SO) catalyzes the physiologically critical conversion of sulfite to sulfate. Enzymatic activity is dependent on the presence of the metal molybdenum complexed with a pyranopterin-dithiolene cofactor termed molybdopterin. Comparison of the amino acid sequences of SOs from a variety of sources has identified a single conserved Cys residue essential for catalytic activity. The crystal structure of chicken liver sulfite oxidase indicated that this residue, Cys185 in chicken SO, coordinates the Mo atom in the active site. To improve our understanding of the role of this residue in the catalytic mechanism of sulfite oxidase, serine and alanine variants at position 185 of recombinant chicken SO were generated. Spectroscopic and kinetic studies indicate that neither variant is capable of sulfite oxidation. The crystal structure of the C185S variant was determined to 1.9 {angstrom} resolution and to 2.4 {angstrom} resolution in the presence of sulfite, and the C185A variant to 2.8 {angstrom} resolution. The structures of the C185S and C185A variants revealed that neither the Ser or Ala side chains appeared to closely interact with the Mo atom and that a third oxo group replaced the usual cysteine sulfur ligand at the Mo center, confirming earlier extended X-ray absorption fine structure spectroscopy (EXAFS) work on the human C207S mutant. An unexpected result was that in the C185S variant, in the absence of sulfite, the active site residue Tyr322 became disordered as did the loop region flanking it. In the C185S variant crystallized in the presence of sulfite, the Tyr322 residue relocalized to the active site. The C185A variant structure also indicated the presence of a third oxygen ligand; however, Tyr322 remained in the active site. EXAFS studies of the Mo coordination environment indicate the Mo atom is in the oxidized Mo{sup VI} state in both the C185S and C185A variants of chicken SO and show the expected trioxodithiolene active site. Density functional theory calculations of the trioxo form of the cofactor reasonably reproducd the Mo=O distances of the complex; however, the calculated Mo-S distances were slightly longer than either crystallographic or EXAFS measurements. Taken together, these results indicate that the active sites of the C185S and C185A variants are essentially catalytically inactive, the crystal structures of C185S and C185A variants contain a fully oxidized, trioxo form of the cofactor, and Tyr322 can undergo a conformational change that is relevant to the reaction mechanism. Additional DFT calculations demonstrated that such methods can reasonably reproduce the geometry and bond lengths of the active site.

36 MATERIALS SCIENCE↗

Identification of Simultaneous U(VI) Sorption Complexes and U(IV) Nanoprecipitates on the Magnetite (111) Surface

Sequestration of uranium (U) by magnetite is a potentially important sink for U in natural and contaminated environments. However, molecular-scale controls that favor U(VI) uptake including both adsorption of U(VI) and reduction to U(IV) by magnetite remain poorly understood, in particular, the role of U(VI)-CO{sub 3}-Ca complexes in inhibiting U(VI) reduction. To investigate U uptake pathways on magnetite as a function of U(VI) aqueous speciation, we performed batch sorption experiments on (111) surfaces of natural single crystals under a range of solution conditions (pH 5 and 10; 0.1 mM U(VI); 1 mM NaNO{sub 3}; and with or without 0.5 mM CO{sub 3} and 0.1 mM Ca) and characterized surface-associated U using grazing incidence extended X-ray absorption fine structure spectroscopy (GI-EXAFS), grazing incidence X-ray diffraction (GI-XRD), and scanning electron microscopy (SEM). In the absence of both carbonate ([CO{sub 3}]T, denoted here as CO{sub 3}) and calcium (Ca), or in the presence of CO{sub 3} only, coexisting adsorption of U(VI) surface species and reduction to U(IV) occurs at both pH 5 and 10. In the presence of both Ca and CO{sub 3}, only U(VI) adsorption (VI) occurs. When U reduction occurs, nanoparticulate UO{sub 2} forms only within and adjacent to surface microtopographic features such as crystal boundaries and cracks. This result suggests that U reduction is limited to defect-rich surface regions. Further, at both pH 5 and 10 in the presence of both CO{sub 3} and Ca, U(VI)-CO{sub 3}-Ca ternary surface species develop and U reduction is inhibited. These findings extend the range of conditions under which U(VI)-CO{sub 3}-Ca complexes inhibit U reduction.

99 GENERAL AND MISCELLANEOUS↗

Treatment of Nitric Acid-, U(VI)-, and Tc(VII)-Contaminated Groundwater in Intermediate-Scale Physical Models of an In Situ Biobarrier

Metal and hydrogen ion acidity and extreme nitrate concentrations at Department of Energy legacy waste sites pose challenges for successful in situ U and Tc bioimmobilization. In this study, we investigated a potential in situ biobarrier configuration designed to neutralize pH and remove nitrate and radionuclides from nitric acid-, U-, and Tc-contaminated groundwater for over 21 months. Ethanol additions to groundwater flowing through native sediment and crushed limestone effectively increased pH (from 4.7 to 6.9), promoted removal of 116 mM nitrate, increased sediment biomass, and immobilized 94% of total U. Increased groundwater pH and significant U removal was also observed in a control column that received no added ethanol. Sequential extraction and XANES analyses showed U in this sediment to be solid-associated U(VI), and EXAFS analysis results were consistent with uranyl orthophosphate (UO2)3(PO4)2·4H2O(s), which may control U solubility in this system. Ratios of respiratory ubiquinones to menaquinones and copies of dissimilatory nitrite reductase genes, nirS and nirK, were at least 1 order of magnitude greater in the ethanol-stimulated system compared to the control, indicating that ethanol addition promoted growth of a largely denitrifying microbial community. Sediment 16S rRNA gene clone libraries showed that Betaproteobacteria were dominant (89%) near the source of influent acidic groundwater, whereas members of Gamma- and Alphaproteobacteria and Bacteroidetes increased along the flow path as pH increased and nitrate concentrations decreased, indicating spatial shifts in community composition as a function of pH and nitrate concentrations. Results of this study support the utility of biobarriers for treating acidic radionuclide- and nitrate-contaminated groundwater.

09 BIOMASS FUELS↗

Direct deconvolution of two-state pump-probe x-ray absorption spectra and the structural changes in a 100 ps transient of Ni(II)-tetramesitylporphyrin.

Full multiple scattering (FMS) Minuit XANES (MXAN) has been combined with laser pump-probe K-edge X-ray absorption spectroscopy (XAS) to determine the structure of photoexcited Ni(II)tetramesitylporphyrin, Ni(II)TMP, in dilute toluene solution. It is shown that an excellent simulation of the XANES spectrum is obtained, excluding the lowest-energy bound-state transitions. In ground-state Ni(II)TMP, the first-shell and second-shell distances are, respectively, d(Ni-N) = (1.93 {+-} 0.02) {angstrom} and d(Ni-C) = (2.94 {+-} 0.03) {angstrom}, in agreement with a previous EXAFS result. The time-resolved XANES difference spectrum was obtained from the spectra of Ni(II)TMP in its photoexcited T{sub 1} state and its ground state, S{sub 0}. The XANES difference spectrum has been analyzed to obtain both the structure and the fraction of the T{sub 1} state. If the T{sub 1} fraction is kept fixed at the value (0.37 {+-} 0.10) determined by optical transient spectroscopy, a 0.07 {angstrom} elongation of the Ni-N and Ni-C distances [d(Ni-N) and d(Ni-C)] is found, in agreement with the EXAFS result. However, an evaluation of both the distance elongation and the T{sub 1} fraction can also be obtained using XANES data only. According to experimental evidence, and MXAN simulations, the T{sub 1} fraction is (0.60 {+-} 0.15) with d(Ni-N) = (1.98 {+-} 0.03) {angstrom} (0.05 {angstrom} elongation). The overall uncertainty of these results depends on the statistical correlation between the distances and T{sub 1} fraction, and the chemical shift of the ionization energy because of subtle changes of metal charge between the T{sub 1} and S{sub 0} states. The T{sub 1} excited-state structure results, independently obtained without the excited-state fraction from optical transient spectroscopy, are still in agreement with previous EXAFS investigations. Thus, full multiple scattering theory applied through the MXAN formalism can be used to provide structural information, not only on the ground-state molecules but also on very short-lived excited states through differential analysis applied to transient photoexcited species from time-resolved experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Theory-Guided X-ray Absorption Spectroscopy Approach for Identifying Active Sites in Atomically Dispersed Transition-Metal Catalysts

Atomically dispersed supported metal catalysts offer new properties and the benefits of maximized metal accessibility and utilization. The characterization of these materials, however, remains challenging. Using atomically dispersed platinum supported on crystalline MgO (chosen for its well-defined bonding sites) as a prototypical example, we demonstrate in this work how systematic density functional theory calculations for assessing all the potentially stable platinum sites, combined with automated analysis of extended X-ray absorption fine structure (EXAFS) spectra, leads to unbiased identification of isolated, surface-enveloped platinum cations as the catalytic species for CO oxidation. The catalyst has been characterized by atomic-resolution imaging and EXAFS and high-energy resolution fluorescence detection X-ray absorption near edge spectroscopy. The proposed platinum sites are in agreement with experiment. This theory-guided workflow leads to rigorously determined structural models and provides a more detailed picture of the structure of the catalytically active site than what is currently possible with conventional EXAFS analyses. As this approach is efficient and agnostic to the metal, support, and catalytic reaction, we posit that it will be of broad interest to the materials characterization and catalysis communities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Essentially Molecular Metal Complexes Anchored to Zeolite: Synthesis and Characterization of Rhodium Complexes and Ruthenium Complexes Prepared from Rh(acac)(2-C2H4)2 and cis-Ru(acac)2( -C2H4)2

Mononuclear complexes of rhodium and of ruthenium, Rh(acac)({eta}{sup 2}-C{sub 2}H{sub 4}){sub 2} and cis-Ru(acac)2({eta}{sup 2}-C{sub 2}H{sub 4}){sub 2} (acac = C{sub 5}H{sub 7}O{sub 2}{sup -}), were used as precursors to synthesize metal complexes bonded to zeolite {beta}. Infrared (IR) and extended X-ray absorption fine structure (EXAFS) spectra show that the species formed from Rh(acac)({eta}{sup 2}-C{sub 2}H{sub 4}){sub 2} was Rh({eta}{sup 2}-C{sub 2}H{sub 4}){sub 2}{sup +}, which was bonded to the zeolite at aluminum sites via two Rh-O bonds. Reaction of this supported rhodium complex with CO gave the supported rhodium gem-dicarbonyl Rh(CO){sub 2}{sup +}, which was characterized by two {nu}{sub CO} bands in the IR spectrum, at 2048 and 2115 cm{sup -1}, that were sharp (fwhm of 2115-cm{sup -1} band = 5 cm{sup -1}), indicating a high degree of uniformity of the supported species. Nearly the same result was observed (Liang, A. et al. J. Am. Chem. Soc. 2009, 131, 8460) for the isostructural rhodium complex supported on dealuminated HY zeolite, which was characterized by frequencies of the {nu}{sub CO} bands that were 4 and 2 cm{sup -1}, respectively, greater than those characterizing the zeolite {beta}-supported complex. This comparison indicates that the Rh atoms in Rh({eta}{sup 2}-C{sub 2}H{sub 4}){sub 2}{sup +} anchored on zeolite {beta} were slightly more electron-rich than those on zeolite Y. This inference is supported by EXAFS results showing shorter Rh-C bonds in the zeolite {beta}-supported rhodium ethene complex than in the zeolite Y-supported rhodium ethene complex. In contrast to these supported rhodium complexes, the zeolite {beta}-supported ruthenium samples were shown by IR and EXAFS spectroscopies to consist of mixtures of mononuclear ruthenium complexes with various numbers of acac ligands; when CO reacted with the supported ruthenium complexes, the resultant ruthenium carbonyls were characterized by {nu}{sub CO} spectra characteristic of both ruthenium dicarbonyls and ruthenium tricarbonyls.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Supported Rhenium Complexes: Almost Uniform Rhenium Tricarbonyls Synthesized from CH[subscript 3]Re(CO)[subscript 5] and HY Zeolite

Supported rhenium complexes were prepared from CH{sub 3}Re(CO){sub 5} and dealuminated HY zeolite or NaY zeolite, each with a Si/Al atomic ratio of 30. The samples were characterized with infrared (IR) and extended X-ray absorption fine structure (EXAFS) spectroscopies. EXAFS data characterizing the sample formed by the reaction of CH{sub 3}Re(CO){sub 5} with dealuminated HY zeolite show that the rhenium complexes were bonded to the zeolite frame, incorporating, on average, three carbonyl ligands per Re atom (as shown by Re-C and multiple-scattering Re-O EXAFS contributions). The IR spectra, consistent with this result, show that the supported rhenium carbonyls were bonded near aluminum sites of the zeolite, as shown by the decrease in intensity of the IR bands characterizing the acidic silanol groups resulting from the reaction of the rhenium carbonyl with the zeolite. This supported metal complex was characterized by narrow peaks in the {nu}{sub CO} region of the IR spectrum, indicating highly uniform species. In contrast, the species formed from CH{sub 3}Re(CO){sub 5} on NaY zeolite lost fewer carbonyl ligands than those formed on HY zeolite and were significantly less uniform, as indicated by the greater breadth of the {nu}{sub CO} bands in the IR spectra. The results show the importance of zeolite H{sup +} sites for the formation of uniform supported rhenium carbonyls from CH{sub 3}Re(CO){sub 5}; the formation of such uniform complexes did not occur on the NaY zeolite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deactivation Mechanisms of Ni-Based Tar Reforming Catalysts As Monitored by X-ray Absorption Spectroscopy

Deactivation mechanisms of alumina-supported, Ni-based catalysts for tar reforming in biomass-derived syngas were evaluated using extended X-ray absorption fine structure (EXAFS) spectroscopy. Catalysts were characterized before and after catalytic reaction cycles and regeneration procedures, which included oxidation by a mixture of steam and air, and reduction in hydrogen. Qualitative analysis of the EXAFS spectra revealed that oxidation of a portion of the Ni in the catalysts to form an oxide phase and/or a sulfide phase were likely scenarios that led to catalyst deactivation with time-on-stream and with increased reaction cycles. Deactivation through carbon deposition, phosphorus poisoning, or changes in particle size were deemed as unlikely causes. Quantitative analysis of the EXAFS spectra indicated sulfur poisoning occurred with time-on-stream, and the contaminating species could not be completely removed during the regeneration protocols. The results also verified that Ni-containing oxide phases (most likely a spinel also containing Mg and Al) formed and contributed to the deactivation. This study validates the need for developing catalyst systems that will protect Ni from sulfur poisoning and oxide formation at elevated reaction and regeneration temperatures.

08 HYDROGEN↗