Search NASA⌕ Search

SEARCH · Search NASA

Results for “Earth return”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Large Space Telescope Mission analysis

The total mission scenario from Shuttle/LST (Large Space Telescope) integration to ground return is described. The LST is to contain near-diffraction-limited, 2.4-m optics and a variety of instruments that will allow it to make observations from the ultraviolet to the infrared regions. Particular attention is given to the most important aspect of the LST development planning, which consists in the design for change in both configuration and operation. The discussion covers mission objectives, planning for scientific observation, and support operations. The inherent characteristics of the periodic Space Shuttle revisits and earth return capability provide the LST with a capability for growth that should be incorporated into every phase of its development.

Friedlaender, F. M.↗

Mars Sample Return mission concept status

This paper will provide an overview of current options and specific concepts for a potential Mars Sample Return (MSR) architecture being jointly studied by NASA and ESA. Overall objectives and mission options will be described, including the architecture’s constraints and notional timelines. The paper will highlight architecture-level trade studies, including specific elements and their status. The overall Sample Retrieval Lander (SRL) mission concept, including vehicle options will be described, including the Mars Ascent Vehicle (MAV), Sample Fetch Rover (being studied by ESA), Orbiting Sample container (OS), and tube transfer robotics systems. The concept and status of the Earth Return Orbiter (ERO) mission, being studied by ESA, and the Capture/Containment and Return System (CCRS) which would be the payload on the ERO, will be discussed.

Vijendran, Sanjay↗

Obtaining coincident image observations for Mission to Planet Earth science data return

One objective of the Mission to Planet Earth (MTPE) program involves comparing data from various instruments on multiple spacecraft to obtain a total picture of the Earth's systems. To correlate image data from instruments on different spacecraft, these spacecraft must be able to image the same location on the Earth at approximately the same time. Depending on the orbits of the spacecraft involved, complicated operational details must be considered to obtain such observations. If the spacecraft are in similar orbits, close formation flying or synchronization techniques may be used to assure coincident observations. If the orbits are dissimilar, the launch time of the second satellite may need to be restricted in order to align its orbit with that of the first satellite launched. This paper examines strategies for obtaining coincident observations for spacecraft in both similar and dissimilar orbits. Although these calculations may be performed easily for coplanar spacecraft, the non-coplanar case involves additional considerations which are incorporated into the algorithms presented herein.

Newman, Lauri Kraft↗

Low Risk Technique for Sample Acquisition from Remote and Hazardous Sites on a Comet

This paper describes a mission comet sampling strategy, known as CORSAIR (COmet Rendezvous, Sample Acquisition, Investigation, and Return), which was proposed for NASA New Frontiers 2017. The proposal was led by Applied Physics Lab (APL) with partners Goddard Space Flight Center (GSFC) and Deutsches Zentrum für Luft- und Raumfahrt (DLR). The mission concept is to launch a projectile from a satellite that is capable of gathering a 300 cc sample. The projectile is tethered and is reeled back to the spacecraft after gathering the sample. Once back at the spacecraft, a robotic manipulator extracts the sample cartridge and places the cartridge into an earth return vehicle (ERV). This method has the following favorable characteristics: 1. Places the mission at minimal risk by isolating the spacecraft from the comet 2. Allows access to remote and otherwise inaccessible locations 3. Permits deep penetration into the surface

Comet Sample↗

Desert Research and Technology Studies (DRATS) Traverse Planning

Slide 1] The Desert Research and Technology Studies (DRATS) include large scale field tests of manned lunar surface exploration systems; these tests are sponsored by the Director s Office of Integration (DOI) [sic, Directorate Integration Office (DIO)] within the Constellation Program and they include geological exploration objectives along well designed traverses. These traverses are designed by the Traverse Team, an ad hoc group of some 10 geologists form NASA and academia, as well as experts in mission operation who define the operational constraints applicable to specific simulation scenarios. [Slide 2] These DRATS/DOI tests focus on 1) the performance of major surface systems, such as rovers, mobile habitats, communication architecture, navigation tools, earth-moving equipment, unmanned reconnaissance robots etc. under realistic field conditions and 2) the development of operational concepts that integrate all of these systems into a single, optimized operation. The participation of science is currently concentrating on geological sciences, with the objective of developing suitable tools and documentation protocols to sample representative rocks for Earth return, and to generate some conceptual understanding of the ground support structure that will be needed for the real time science-support of a lunar surface crew. [Slide 3] Major surface systems exercised in the June 2008 analog tests at the Moses Lake site, WA. [Upper left] The Chariot Rover (developed at Johnson Space Center) is an unpressurized vehicle driven by fully suited crews. [Upper right] Mobile Habitat provided by the Jet Propulsion Laboratory. Chariot is the more nimble and mobile vehicle and the idea is to drive the habitat remotely to some rendezvous place where Chariot would catch up - after a lengthy traverse - at the end of the day. [Lower left] The K-10 remotely operated robot (provided by NASA Ames Research Center) conducting scientific/geologic reconnaissance of the prospective traverse region, locating specific sites for more detailed exploration by Chariot and its crew. [Lower right] This earth-moving equipment (provided by NASA KSC) can be attached to Chariot and is envisioned to, for example, level an outpost site or to mine lunar soi

Horz, Friedrich↗

Near-Earth Asteroid Sample Return Workshop

This volume contains abstracts that have been accepted for presentation at the Near-Earth Asteroid Sample Return Workshop, 11-12 Dec 2000. The Steering Committee consisted of Derek Sears, Chair, Dan Britt, Don Brownlee, Andrew Cheng, Benton Clark, Leon Gefert, Steve Gorevan, Marilyn Lindstrom, Carle Pieters, Jeff Preble, Brian Wilcox, and Don Yeomans. Logistical, administrative, and publications support were provided by the Publications and Program Services Department of the Lunar and Planetary Institute.

Source record↗

Near-Earth Asteroid Sample Return Missions

The rate of discovery of new Near Earth Asteroids (NEAs) and the success of D-S 1 and NEAR-Shoemaker, suggest that sample return from NEAs is now technically feasible. Here we present a summary of a recent workshop on the topic. Additional information is contained in the original extended abstract.

Sears, D. W. G.↗

Extraterrestrial Amino Acids and Amines Identified in Asteroid Ryugu Samples Returned By the Hayabusa2 Mission

The hot water and acid extracts of two different Ryugu samples collected by the Hayabusa2 mission were analyzed for the presence of aliphatic amines and amino acids. The abundances and relative distributions of both classes of molecules were determined, as well as the enantiomeric compositions of the chiral amino acids. The Ryugu samples studied here were recovered from sample chambers A and C, which were composed of surface material, and a combination of surface and possible subsurface material, respectively. A total of thirteen amino acids were detected and quantitated in these samples, with an additional five amino acids that were tentatively identified but not quantitated. The abundances of four aliphatic amines identified in the Ryugu samples were also determined in the current work. Amino acids were observed in the acid hydrolyzed and unhydrolyzed hot water extracts of asteroid Ryugu regolith using liquid chromatography with UV fluorescence detection and high-resolution mass spectrometry. Conversely, aliphatic amines were only analyzed in the unhydrolyzed hot water Ryugu extracts. Two- to six-carbon (C 2 -C 6 ) amino acids with individual abundances ranging from 0.02 to 15.8 nmol g −1 , and one- to three-carbon (C 1 -C 3 ) aliphatic amines with individual abundances from 0.05 to 34.14 nmol g −1 , were found in the hot water extracts. Several non-protein amino acids that are rare in biology, including β-amino-n-butyric acid (β-ABA) and β-aminoisobuytric acid (β-AIB), were racemic or very nearly racemic, thus indicating their likely abiotic origins. Trace amounts of select protein amino acids that were enriched in the ւ-enantiomer may indicate low levels of terrestrial amino acid contamination in the samples. However, the presence of elevated abundances of free and racemic alanine, a common protein amino acid in terrestrial biology, and elevated abundances of the predominately free and racemic non-protein amino acids, β-ABA and β-AIB, indicate that many of the amino acids detected in the Ryugu water extracts were indigenous to the samples. Although the Ryugu samples have been found to be chemically similar to CI type carbonaceous chondrites, the measured concentrations and relative distributions of amino acids and aliphatic amines in Ryugu samples were notably different from those previously observed for the CI1.1 carbonaceous chondrite, Orgueil. This discrepancy could be the result of differences in the original chemical compositions of the parent bodies and/or alteration conditions, such as space weathering. In addition to α-amino acids that could have been formed by Strecker cyanohydrin synthesis during a low temperature aqueous alteration phase, β-, γ-, and δ-amino acids, including C 3 – C 5 straight-chain n-ω-amino acids that are not formed by Strecker synthesis, were also observed in the Ryugu extracts. The suite of amino acids measured in the Ryugu samples indicates that multiple amino acid formation mechanisms were active on the Ryugu parent body. The analytical techniques used here are well-suited to search for similar analytes in asteroid Bennu material collected by the NASA OSIRIS-REx mission scheduled for Earth return in September 2023.

Hayabusa2↗

Prospects for manned Mars missions

Studies called "EMPIRE" (standing for Early Manned Planetary-Interplanetary Roundtrip Expeditions) were initiated early in 1962 by the Future Projects Office for the Marshall Space Flight Center. These and related studies by other NASA centers were intended to bring to light the technical problems associated with such missions. The emphasis of these studies was on single and multiple planetary fty-bys, with some consideration given to planetary orbital and landing missions. The time period considered was the early 1970's. The contractors were Aeronutronic Division (Philco-Ford Motor Company), Lockheed Missiles and Space Company and General Dynamics/Astronautics. Studies relating to the time period 1975-85 were initiated in early 1963, by contracts with General Dynamics/ Fort Worth and Douglas Aircraft Company. Follow-on EMPIRE studies were carried out by Lockheed and General Dynamics/Astronautics. In addition, studies were made of a Mars Excursion Module by Aeronutronic, a Mars Mission Module (MMM) by North American Aviation's Space and Information Division, and an Earth Return Module (ERM) by Lockheed under the direction of the Manned Spacecraft Center. Complementary to these efforts were studies initiated by the Ames Research Center early in 1963 for a Manned Mars Landing and Return Mission. These studies were conducted by North American Aviation and by the TRW Space Technology Laboratories.

MARS /PLANET/↗

Current concepts for a tracking and data relay satellite system.

Description of two varieties of a tracking and data relay satellite system utilizing geosynchronous relay spacecraft to provide telecommunications service to user spacecraft in low earth orbit. These users are categorized by their earth return data rates. The described system varieties are the two versions of a low and medium data rate system whose definition study is now complete. One of these versions utilizes a spin-stabilized spacecraft, while the other employs a three-axis stabilized one. Some of the communication problems peculiar to these system varieties are discussed.

Clark, G. Q.↗

A feasibility study of unmanned rendezvous and docking in Mars orbit: Midterm review

The ascent, rendezvous, docking and sample transfer operations in a potential MSSR mission that uses the Mars orbital rendezvous mode are considered. In order that the design choices made for these operations remain compatible with the rest of the mission, the impact on the Earth launch, Mars landing and orbiting and Earth return phase are also being assessed. The selection and description of a preliminary baseline concept are presented.

Source record↗

Viking 1975 Mars lander interactive computerized video stereophotogrammetry

A novel computerized interactive video stereophotogrammetry system has been developed for analysis of Viking 1975 lander imaging data. Prompt, accurate, and versatile performance is achieved. Earth-returned digital imagery data are driven from a computer to a pair of video monitors. Powerful computer support enables a photogrammetrist, stereoscopically viewing the video displays, to create diverse topographic products. Profiles, representing the intersection of any definable surface with the Martian relief, are readily generated. Vertical profiles and elevation contour maps, including stereo versions, are produced. Computer overlays of map products on stereo images aid map interpretation and permit independent quality evaluation. Slaved monitors enable parallel viewing. Maps span from the immediate foreground to the remote limits of ranging capability. Surface sampler arm specific vertical profiles enable direct reading of arm commands required for sample acquisition, rock rolling, and trenching. The ranging accuracy of plus or minus 2 cm throughout the sample area degrades to plus or minus 20 m at 100-m range.

Liebes, S., Jr.↗

Satellite services system analysis study. Volume 1: Executive summary

Service requirements are considered. Topics include development of on-orbit operations scenarios, service equipment summary, crew interaction, and satellite features facilitating servicing. Service equipment concepts are considered. Topics include payload deployment, close proximity retrieval, on-orbit servicing, backup/contingency, delivery/retrieval of high energy payloads, Earth return, optional service, and advanced capabilities. Program requirements are assessed.

Source record↗

Satellite services system analysis study. Volume 3: Service equipment requirements

Service equipment mission requirements are discussed. On-orbit operations, satellite classes, and reference missions are included. Service equipment usage and requirements are considered. Equipment identification methodology is discussed. Service equipment usage is analyzed, including initial launch, revisit, Earth return, and orbital storage. A summary of service requirements and equipment is presented, including service equipment status, even interaction, satellite features, and observations.

Source record↗

Satellite services system analysis study. Volume 4: Service equipment concepts

Payload deployment equipment is discussed, including payload separation, retention structures, the remote manipulator system, tilt tables, the payload installation and deployment aid, the handling and positioning aid, and spin tables. Close proximity retrieval, and on-orbit servicing equipment is discussed. Backup and contingency equipment is also discussed. Delivery and retrieval of high-energy payloads are considered. Earth return equipment, the aft flight deck, optional, and advanced equipment are also discussed.

Source record↗

Servicing costs for representative service missions

User cost for three satellite services were assessed. The three missions are: advanced X-ray astrophysics facility (AXAF) revisit; upper atmosphere research satellite (UARS) revisit: and solar maximum mission (SMM) Earth return. Service scenarios for the missions to identify service equipment needs and on orbit usage were developed. The AXAF revisit is a service mission involving a contamination sensitive satellite. Following servicing and checkout, the spacecraft is redeployed from the orbiter. The total user charges for revisit missions is from 5 to 10% less than the cost to build and relaunch a replacement satellite. It is indicated that satellite servicing from the Orbiter is cost effective.

Mockovciak, J., Jr.↗

Characteristics of a dual mission concept for intensive study of moon and Mars or moon and asteroids

An assessment is presented of the results of recent feasibility studies on a low cost dual mission concept, employing a single spacecraft for the sequential, intensive survey of two planets. After establishing the features of a basic lunar-Martian polar orbiting mission in the context of existing spacecraft and propulsion technology, an examination of trajectory options shows that an earth return maneuver allows the application of the same concept to lunar-asteroid missions and offers substantial savings for the lunar-Martian mission. The implications of Centaur availability for extension of this concept to main-belt asteroids and to tripple missions are considered, along with questions of cost and reliability.

Uphoff, C. W.↗

Mars exploration, Venus swingby and conjunction class mission modes, time period 2000 to 2045

Trajectory and mission requirement data are presented for Earth-Mars opposition class and conjunction class round trip stopover mission opportunities available during the time period year 2000 to year 2045. The opposition class mission employs the gravitational field of Venus to accelerate the space vehicle on either the outbound or inbound leg. The gravitational field of Venus was used to reduce the propulsion requirement associated with the opposition class mission. Representative space vehicle systems are sized to compare the initial mass required in low Earth orbit of one mission opportunity with another mission opportunity. The interplanetary space vehicle is made up of the spacecraft and the space vehicle acceleration system. The space vehicle acceleration system consists of three propulsion stages. The first propulsion stage performs the Earth escape maneuver; the second stage brakes the spacecraft and Earth braking stage into the Mars elliptical orbit and effects the escape maneuver from the Mars elliptical orbit. The third propulsion stage brakes the mission module into an elliptical orbit at Earth return. The interplanetary space vehicle was assumed to be assembled in and depart from the space station circular orbit.

Mars Exploration↗