Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electron tunneling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Distribution of 7 Li implants in Nb films for a sterile neutrino search

The Beryllium-7 Electron capture in Superconducting Tunnel junctions (BeEST) experiment searches for sub-MeV sterile neutrinos by measuring the 7 Li recoil spectrum from 7 Be decay in Ta-based superconducting quantum sensors. Its sensitivity is limited by spectral broadening from interactions between 7 Be/ 7 Li and the Ta host material. This study investigates Nb as an alternative sensor material using scanning transmission electron microscopy (STEM) and atom probe tomography (APT) on 7 Li-implanted Nb films (∼0.5 at. %). STEM shows no 7 Li cluster formation and no implantation-induced microstructural degradation, while APT reveals some limited 7 Li segregation to grain boundaries. Although this segregation may slightly influence binding energies, it is unlikely to affect the broadening of the recoil spectrum significantly. These findings support Nb as a viable sensor material for future phases of the BeEST experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural, electronic, and polarization properties of YN and LaN

ScN has attracted great attention for its electronic properties and its ability to enhance polarization of AlN; however, its sister compounds, YN and LaN, remain much less studied. Here, we use first-principles calculations to evaluate YN and LaN in their cubic and hexagonal phases. Rocksalt YN and LaN are semiconductors, although we show that LaN differs from ScN and YN in having a direct band gap, which we attribute to its weaker p-p coupling. Both have low electron effective masses. In addition to their rocksalt structures, we evaluate the layered hexagonal and wurtzite phases of YN and LaN. For YN, the wurtzite phase cannot be stabilized, and hexagonal YN is higher in energy than rocksalt YN. In contrast, for LaN, the wurtzite phase is favored, and it is comparable in energy to rocksalt LaN. Wurtzite LaN has a polarization of 0.608 C/m 2 (referenced to the centrosymmetric layered hexagonal phase), and a high piezoelectric coefficient e 33 = 1.78 C/m 2 . Interestingly, we find that the polarization of wurtzite LaN may be reversible; we find a relatively small switching barrier of 0.06 eV per formula unit, offering the potential for its use as a ferroelectric. Since wurtzite LaN is closely lattice matched to InP, we investigate a heterostructure between (0001) wurtzite LaN and (111) zinc-blende InP, and find the polarization discontinuity would yield a bound charge of 1.3 × 10 14 e/cm 2 , offering the potential for novel electronic applications such as tunnel junctions. Furthermore, our results compare and contrast ScN, YN, and LaN, and highlight the potential of these materials for adoption in electronic and ferroelectric devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Review of recent studies on nanoscale electrical junctions and contacts: Quantum tunneling, current crowding, and interface engineering

The study of charge carrier transport at nanoscale electrical contacts is crucial for the development of next-generation electronics. In this study, we review recent modeling efforts on quantum tunneling, current crowding, and contact resistance across electrical interfaces with nanometer scale dimensions. A generalized self-consistent model for quantum tunneling induced electron transport in metal–insulator–metal (MIM) junctions is summarized. Rectification of a dissimilar MIM junction is reviewed. A modified two-dimensional (2D) transmission line model is used to investigate the effects of spatially varying specific contact resistivity along the contact length. The model is applied to various types of electrical contacts, including ohmic contacts, MIM junction based tunneling contacts, and 2D-material-based Schottky contacts. Roughness engineering is recently proposed to offer a possible paradigm for reducing the contact resistance of 2D-material-based electrical contacts. Contact interface engineering, which can mitigate current crowding near electrical contacts by spatially designing the interface layer thickness or properties, without requiring an additional material or component, is briefly reviewed. Tunneling engineering is suggested to eliminate severe current crowding in highly conductive ohmic contacts by introducing a thin tunneling layer or gap between the contact members. Furthermore, unsolved problems and challenges are also discussed.

2D materials↗
DOE OSTI2025

Nanoscale Structure and Interfacial Electrochemical Reactivity of Moiré-Engineered Atomic Layers

Here, the electronic properties of atomically thin van der Waals (vdW) materials can be precisely manipulated by vertically stacking them with a controlled offset (for example, a rotational offset─i.e., twist─between the layers, or a small difference in lattice constant) to generate moiré superlattices. In recent years, the application of this “twistronics” concept to interfacial electrochemistry has unveiled unique pathways for tailoring the electrochemical reactivity. Furthermore, this Account provides an overview of our work that leveraged a suite of structural characterization methods, such as interferometric four-dimensional scanning transmission electron microscopy, dark-field transmission electron microscopy, and scanning tunneling microscopy, along with nanoscale electrochemical measurement techniques, namely, scanning electrochemical cell microscopy (SECCM), to uncover and dissect the profound impact of electrode electronic structure, controlled by interlayer twist, on interfacial electron transfer kinetics.

Charge transfer↗
DOE OSTI2020

Generation of a quasi-static magnetic field by a circularly polarised laser pulse due to tunnelling gas ionisation

We present a theoretical model of the quasi-static magnetic field generation in a laser channel, which is formed behind the front of a short laser pulse that ionises a gas. The generation of a magnetic field is caused by the appearance of the electron pressure anisotropy during tunnelling ionisation of atoms. In the considered case of subrelativistic laser light intensities, the generated magnetic field can reach ∼1 MG with an energy transformation ratio of about 1 %, which paves the way for identifying the proposed mechanism when use is made of a wide class of ultrashort pulse lasers. (interaction of laser radiation with matter. laser plasma)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Revealing symmetry-broken superconducting configurations by density functional theory

A coherent theory for the superconductivity of both conventional and unconventional superconductors is currently lacking. Here we show that superconductivity arises from the formation of a symmetry-broken superconducting configuration (SCC) due to atomic perturbation of the normal conducting configuration (NCC). This electron–phonon interaction creates straight one-dimensional tunnels (SODTs) for charge density of electrons and/or holes as revealed by the calculations based on density functional theory (DFT). The SODTs act as resistance-free superhighways and are correlated to the Cooper pairs in the Bardeen–Cooper–Schrieffer (BCS) theory. The formation of SODTs implies that the electron–phonon interaction in the BCS theory can be represented by the difference in charge densities between SCC and NCC predicted by DFT. The present work highlights that in conventional superconductors, SODTs are embedded within the bulk materials and are easily destroyed by phonon vibrations, resulting in a low critical superconducting temperature (T C ). Conversely, in unconventional superconductors such as YBa 2 Cu 3 O 7 (YBCO 7 ), SODTs are protected by a layered pontoon structure with very weak bonding to the bulk materials, maintaining SODTs’ stability at higher temperatures and leading to a much higher T C . The present approach is validated for 14 conventional superconductors of 18 pure elements and MgB 2 examined in this work, including the presently predicted superconductivity in Cu, Ag, Au, Sb, Bi, and MgB 2 at 0 K and 0 GPa, and one unconventional superconductor of YBCO 7 . Our discovery indicates that DFT can be a practical tool for predicting superconductors, enabling a systematic search for new superconducting materials in the future.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Three-dimensional relativistic field-electron interaction in a multicavity high-power klystron. 1: Basic theory

A theoretical investigation of three dimensional relativistic klystron action is described. The relativistic axisymmetric equations of motion are derived from the time-dependent Lagrangian function for a charged particle in electromagnetic fields. An analytical expression of the fringing RF electric and magnetic fields within and in the vicinity of the interaction gap and the space-charge forces between axially and radially elastic deformable rings of charges are both included in the formulation. This makes an accurate computation of electron motion through the tunnel of the cavities and the drift tube spaces possible. Method of analysis is based on Lagrangian formulation. Bunching is computed using a disk model of electron stream in which the electron stream is divided into axisymmetric disks of equal charge and each disk is assumed to consist of a number of concentric rings of equal charges. The Individual representative groups of electrons are followed through the interaction gaps and drift tube spaces. Induced currents and voltages in interacting cavities are calculated by invoking the Shockley-Ramo theorem.

Kosmahl, H. G.↗
DOE OSTI2022

Effect of Intermediate Semiconducting TiOx Thin Films on Nanoparticle-Mediated Electron Transfer: Electrooxidation of CO

The concept of nanoparticle-mediated electron transfer (eT) across insulating thin films was elucidated theoretically by Allongue and Chazalviel in 2011. In their model, metal nanoparticles (NPs) are immobilized atop passivating, self-assembled monolayers (SAMs). They found that under certain conditions, related to the thickness of the SAM and the size of the NPs, efficient faradaic oxidation and reduction reactions could proceed at the NP surface. In the absence of NPs, however, eT was suppressed by the insulating SAM thin films. Allongue and Chazalviel concluded that, within certain bounds, eT is mediated by fast tunneling between the conductive electrode and the metal NPs, while the kinetics of the redox reaction are controlled by the NPs. This understanding has been confirmed using a variety of experimental models. The theory is based on electron tunneling; therefore, the nature of the intervening medium (the insulator in prior studies) should not affect the eT rate. In the present manuscript, however, we show that the theory breaks down under certain electrochemical conditions when the medium between conductors is an n-type semiconductor. Specifically, we find that in the presence of either Au or Pt NPs immobilized on a thin film of TiOx, CO electrooxidation does not proceed. In contrast, the exact same systems lead to the efficient reduction of oxygen. At present, we are unable to explain this finding within the context of the model of Allongue and Chazalviel.

Galyamova, Aigerim↗
DOE OSTI2025

Theory of Two-Level Tunneling Systems in Superconductors

We develop a field theory formulation for the interaction of an ensemble of two-level tunneling systems (TLSs) with the electronic states of a superconductor. Predictions for the impact of two-level tunneling systems on superconductivity are presented, including T c and the spectrum of quasiparticle states for conventional BCS superconductors. We show that nonmagnetic TLS impurities in conventional s-wave superconductors can act as pair-breaking or pair-enhancing defects depending on the level population of the distribution of TLS impurities. We present calculations of the enhancement of superconductivity, both T c and the order parameter, for TLS defects in thermal equilibrium with the electrons and lattice. The scattering of quasiparticles by TLS impurities leads to subgap states below the bulk excitation gap, Δ, as well as resonances in the continuum above Δ. The energies and spectral weights of these states depend on the distribution of tunnel splittings, while the spectral weights are particularly sensitive to the level occupation of the TLS impurities. Under microwave excitation, or decoupling from the thermal bath, a nonequilibrium level population of the TLS distribution generates subgap quasiparticle states near the Fermi level that contribute to dissipation and thus degrade the performance of superconducting devices at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1990

Development of microchannel plates in advanced wind-tunnel instrumentation

Microchannel plate (MCP) electron multiplier dynamic range has been increased 3 to 4 orders of magnitude at ambient temperatures, through enhanced input count rate capability and reduced background or 'dark' noise. The previous upper limit of roughly 10(exp 7) - 10(exp 8) cm(exp -2)s(exp -1) at ambient has been extended to levels approach 10(exp 10) cm(exp -2)s(exp -1) under continuous dc operation. The lower limit, previously set by an irreducible background component (approximately 0.6 cm(exp -2)s(exp -1)), has been lowered to the cosmic ray limit of .01 cm(exp -2)s(exp -1). The high end improvement was achieved by conductively cooling a very low resistance MCP by bonding it to a heat sink, while maintaining pulse-counting operation with multianode readouts. The low-end improvement was achieved by removing all radioisotopes from the MCP matrix glass. The detectors will benefit optical and mass spectrometry, flow visualization, plasma diagnostics, magnetometry, and other high signal flux applications. Very low MCP background noise will benefit X-ray and UV astronomy, medical imaging, trace isotope mass spectrometry, and other applications where the signal flux is often extremely low.

Feller, W. Bruce↗
DOE OSTI2026

Nuclear–Electronic Orbital General Rate Theory: Predicting Hydrogen Kinetic Isotope Effects in the Deep Tunneling Regime

Hydrogen transfer is a critical component of many chemical and biological processes. The ratio of rate constants for hydrogen and deuterium transfer defines the H/D kinetic isotope effect (KIE), which is a powerful tool for elucidating hydrogen transfer mechanisms. Interpretation of experimental H/D KIEs relies on accurate and affordable computational methods. However, due to their light mass, hydrogen and deuterium can undergo tunneling, which is challenging to describe in multidimensional molecular systems. Herein, we introduce the nuclear–electronic orbital general rate theory (NEO-GRT), which enables the efficient prediction of H/D KIEs based on full-dimensional molecular quantum chemistry calculations. The NEO-GRT approach describes the hydrogen transfer rate constant with a general expression that spans the vibrationally adiabatic and nonadiabatic hydrogen tunneling regimes. The input quantities are computed using NEO density functional theory, which treats the transferring hydrogen or deuterium nucleus quantum mechanically on the same level as the electrons. We investigate two intramolecular proton transfer reactions in organic molecules at temperatures down to 50 K to evaluate the performance of NEO-GRT by comparison to transition state theory and ring-polymer instanton theory. The KIEs computed with NEO-GRT agree with those calculated using ring-polymer instanton theory for the full-dimensional molecular systems at the same level of electronic structure theory. This agreement indicates that NEO-GRT captures the deep hydrogen tunneling effects, in contrast to transition state theory, which neglects such effects. Given its relatively low computational cost, NEO-GRT is a promising approach for predicting H/D KIEs in large organic and organometallic systems.

Hydrogen↗
DOE OSTI2024

Fine structure of current noise spectra in nanoelectromechanical resonators

Here, we study the frequency-dependent noise of a suspended carbon nanotube quantum dot nanoelectromechanical resonator induced by electron-vibration coupling. Using a rigorous Keldysh diagrammatic technique, we establish a formal framework connecting the vibrational properties to electrical measurements. We find that the noise power spectrum exhibits a narrow resonant peak at the frequency of the vibrational modes. However, this fine structure tends to disappear due to a coherent cancellation effect when the tunneling barriers are tuned to a symmetric point. Notably, measuring the electrical current noise spectra provides a sensitive alternative method for detecting the damping and dephasing of quantum vibrational modes.

Electric measurements↗
NASA NTRS2006

Multiplexing Transducers Based on Tunnel-Diode Oscillators

Multiplexing and differential transducers based on tunnel-diode oscillators (TDOs) would be developed, according to a proposal, for operation at very low and/or widely varying temperatures in applications that involve requirements to minimize the power and mass of transducer electronic circuitry. It has been known since 1975 that TDOs are useful for making high-resolution (of the order of 10(exp -9)) measurements at low temperatures. Since that time, TDO transducers have been found to offer the following additional advantages, which the present proposal is intended to exploit: TDO transducers can operate at temperatures ranging from 1 K to about 400 K. Most electronic components other than tunnel diodes do not operate over such a wide temperature range. TDO transducers can be made to operate at very low power - typically, <1 mW. Inasmuch as the response of a TDO transducer is a small change in an arbitrarily set oscillation frequency, the outputs of many TDOs operating at sufficiently different set frequencies can be multiplexed through a single wire. Inasmuch as frequencies can be easily subtracted by means of mixing circuitry, one can easily use two TDOs to make differential measurements. Differential measurements are generally more precise and less susceptible to environmental variations than are absolute measurements. TDO transducers are tolerant to ionizing radiation. Ultimately, the response of a TDO transducer is measured by use of a frequency counter. Because frequency counting can be easily implemented by use of clock signals available from most microprocessors, it is not necessary to incorporate additional readout circuitry that would, if included, add to the mass and power consumption of the transducer circuitry. In one example of many potential variations on the basic theme of the proposal, the figure schematically depicts a conceptual differential-pressure transducer containing a symmetrical pair of TDOs. The differential pressure would be exerted on an electrically conductive and grounded diaphragm, which, at zero differential pressure, would nominally be sprung to a middle position between two capacitor plates that would be parts of the two TDOs. The frequencies of the two TDOs would vary in opposite directions as variations in differential pressure bent the diaphragm away from one capacitor plate and toward the other. The outputs of the TDOs would be mixed and lowpass filtered to obtain a signal at the difference between the frequencies of the two TDOs. The difference frequency would be measured by a frequency counter and converted to differential pressure by a computer.

Chui, Talso↗
DOE OSTI2021

Exotic Long-Range Surface Reconstruction on La 0.7 Sr 0.3 MnO 3 Thin Films

Due to an extremely diverse phase space, La 1–x Sr x MnO 3 , as with other manganites, offers a wide range of tunability and applications including colossal magnetoresistance and use as spin-polarized electrodes. Here, we study an unprecedented, exotic surface reconstruction (6 × 6) in La 1–x Sr x MnO 3 (x = 0.3) observed via low-energy electron diffraction (LEED). Scanning tunneling microscopy (STM) shows the surface is relatively flat, with unit-cell step heights, and X-ray photoelectron spectroscopy (XPS) reveals a strong degree of Sr segregation at the surface. By combining electron diffraction and first-principles computations, we propose that the long-range surface reconstruction consists of a Sr-segregated surface with La (6 × 6) ordering. This study expands our understanding of manganite systems and underscores their ability to form interesting surface reconstructions, driven largely by cation segregation that can potentially be controlled for tuning surface ordering.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Uncovering multiscale structure-property correlations via active learning in scanning tunneling microscopy

Atomic arrangements and local sub-structures fundamentally influence emergent material functionalities. These structures are conventionally probed using spatially resolved studies and the property correlations are deciphered by a researcher based on sequential explorations, thereby limiting the efficiency and scope. Here we demonstrate a multi-scale Bayesian deep-learning based framework that automatically correlates material structure with its electronic properties using scanning tunneling microscopy (STM) measurements in real-time. Its predictions are used to autonomously direct exploration toward regions of the sample that optimize a given material property. This method is deployed on a low-temperature ultra-high vacuum STM to understand the structure-property relationship in a europium-based semimetal, EuZn 2 As 2 , a promising candidate relevant to magnetism-driven topological phenomena. The framework employs a sparse-sampling approach to efficiently construct the scalar-property space using minimal measurements, about 1–10% of the data required in standard hyperspectral methods. Moreover, we formulate the problem hierarchically across length scales, implementing autonomous workflow to locate mesoscopic and atomic structures that correspond to a target material property. This framework offers the choice to design scalar-property from the spectroscopic data to steer sample exploration. Our findings reveal correlations of the electronic properties unique to surface terminations, local defect density, and point defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1950

Preliminary Performance Data on General Electric Integrated Electronic Control Operating on J47 RX1-3 Turbojet Engine in NACA Altitude Wind Tunnel

Performance data obtained with recording oscillographs are presented to show the transient response of the General Electric Integrated Electronic Control operating on the J47 RXl-3 turbo-Jet engine over a range of altitudes from 10,000 to 45,000 feet and at ram pressure ratios of 1.03 and 1.4. These data represent the performance of the final control configuration developed after an investigation of the engine transient behavior in the NACA altitude wind tunnel. Oscillograph traces of controlled accelerations (throttle bursts),oontrolled decelerations (throttle chops), and controlled altitude starts are presented.

Darnold Blivas↗
DOE OSTI2024

Mapping charge excitations in generalized Wigner crystals

Transition metal dichalcogenide-based moiré superlattices exhibit strong electron-electron correlations, thus giving rise to strongly correlated quantum phenomena such as generalized Wigner crystal states. Evidence of Wigner crystals in transition metal dichalcogenide moire superlattices has been widely reported from various optical spectroscopy and electrical conductivity measurements, while their microscopic nature has been limited to the basic lattice structure. Theoretical studies predict that unusual quasiparticle excitations across the correlated gap between upper and lower Hubbard bands can arise due to long-range Coulomb interactions in generalized Wigner crystal states. However, the microscopic proof of such quasiparticle excitations is challenging because of the low excitation energy of the Wigner crystal. Here, in this study, we describe a scanning single-electron charging spectroscopy technique with nanometre spatial resolution and single-electron charge resolution that enables us to directly image electron and hole wavefunctions and to determine the thermodynamic gap of generalized Wigner crystal states in twisted WS 2 moiré heterostructures. High-resolution scanning single-electron charging spectroscopy combines scanning tunnelling microscopy with a monolayer graphene sensing layer, thus enabling the generation of individual electron and hole quasiparticles in generalized Wigner crystals. We show that electron and hole quasiparticles have complementary wavefunction distributions and that thermodynamic gaps of ~50 meV exist for the 1/3 and 2/3 generalized Wigner crystal states in twisted WS 2 .

36 MATERIALS SCIENCE↗