Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ellipsometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Fabrication of multi-layered absorption structure for high quantum efficiency photon detectors

We report on some efforts to improve a quantum efficiency of titanium-based optical superconducting transition edge sensors using the multi-layered absorption structure for maximizing photon absorption in the Ti layer. Using complex refractive index values of each film measured by a Spectroscopic Ellipsometry, we designed and optimized by a simulation code. An absorption measurement of fabricated structure was in good agreement with the design and was higher than 99% at optimized wavelength of 1550 nm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical properties of quasi-tetragonal BiFeO3 thin films

Optical transmission spectroscopy and spectroscopic ellipsometry were used to extract the optical properties of an epitaxially grown quasi-tetragonal BiFeO3 thin film in the near infrared to near ultraviolet range. The absorption spectrum is overall blue shifted compared with that of rhombohedral BiFeO3, with an absorption onset near 2.25 eV, a direct 3.1 eV band gap, and charge transfer excitations that are 0.4 eV higher than those of the rhombohedral counterpart. We interpret these results in terms of structural strain and local symmetry breaking.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical metrology of Ni and NiSi thin films used in the self-aligned silicidation process

The thickness-dependent optical properties of nickel metal and nickel monosilicide (NiSi) thin films, used for self-aligned silicidation process, were characterized using spectroscopic ellipsometry. The thickness-dependent complex dielectric function of nickel metal films is shown to be correlated with the change in Drude free electron relaxation time. The change in relaxation time can be traced to the change in grain boundary (GB) reflection coefficient and grain size. A resistivity based model was used as the complementary method to the thickness-dependent optical model to trace the change in GB reflection coefficient and grain size. After silicidation, the complex dielectric function of NiSi films exhibit non-Drude behavior due to superimposition of interband absorptions arising at lower frequencies. The Optical models of the complete film stack were refined using x-ray photoelectron spectroscopy, Rutherford backscattered spectroscopy, and x-ray reflectivity (XRR).

36 MATERIALS SCIENCE↗

Indirect optical absorption and origin of the emission from {beta}-FeSi{sub 2} nanoparticles: Bound exciton (0.809 eV) and band to acceptor impurity (0.795 eV) transitions

We investigated the optical absorption of the fundamental band edge and the origin of the emission from {beta}-FeSi{sub 2} nanoparticles synthesized by ion-beam-induced epitaxial crystallization of Fe{sup +} implanted SiO{sub 2}/Si(100) followed by thermal annealing. From micro-Raman scattering and transmission electron microscopy measurements it was possible to attest the formation of strained {beta}-FeSi{sub 2} nanoparticles and its structural quality. The optical absorption near the fundamental gap edge of {beta}-FeSi{sub 2} nanoparticles evaluated by spectroscopic ellipsometry showed a step structure characteristic of an indirect fundamental gap material. Photoluminescence spectroscopy measurements at each synthesis stage revealed complex emissions in the 0.7-0.9 eV spectral region, with different intensities and morphologies strongly dependent on thermal treatment temperature. Spectral deconvolution into four transition lines at 0.795, 0.809, 0.851, and 0.873 eV was performed. We concluded that the emission at 0.795 eV may be related to a radiative direct transition from the direct conduction band to an acceptor level and that the emission at 0.809 eV derives from a recombination of an indirect bound exciton to this acceptor level of {beta}-FeSi{sub 2}. Emissions 0.851 and 0.873 eV were confirmed to be typical dislocation-related photoluminescence centers in Si. From the energy balance we determined the fundamental indirect and direct band gap energies to be 0.856 and 0.867 eV, respectively. An illustrative energy band diagram derived from a proposed model to explain the possible transition processes involved is presented.

36 MATERIALS SCIENCE↗

Ingrain and grain boundary scattering effects on electron mobility of transparent conducting polycrystalline Ga-doped ZnO films

Transparent conducting polycrystalline Ga-doped ZnO (GZO) films with different thicknesses were deposited on glass substrates at a substrate temperature of 200 deg. C by ion-plating deposition with direct current arc-discharge. The dependences of crystal structure, electrical, and optical properties of the GZO films on thickness have been systematically studied. Optical response due to free electrons of the GZO films was characterized in the photon energy range from 0.73 to 3.8 eV by spectroscopic ellipsometry (SE). The free electron response was expressed by the simple Drude model combined with the Tauc-Lorentz model. From the SE analysis and the results of Hall measurements, electron effective mass, m{sup *}, and optical mobility, {mu}{sub opt}, of the GZO films were determined, based on the assumptions that the films are homogeneous and optically isotropic. By comparing the {mu}{sub opt} and Hall mobility, {mu}{sub Hall}, an indication on the effect of ingrain and grain boundary scattering limiting the electron mobility has been obtained. Moreover, the variation in scattering mechanism causing thickness dependence of {mu}{sub Hall} was correlated with the development of polycrystalline grain structure.

36 MATERIALS SCIENCE↗

Effect of Ti incorporation on the interfacial and optical properties of HfTiO thin films

Interfacial and optical properties of HfTiO films with different Ti concentration grown by radio frequency reactive magnetron sputtering have been investigated by x-ray photoelectron spectroscopy (XPS) and spectroscopy ellipsometry (SE). XPS spectra indicate that interfacial layer is formed unavoidably for Ti doped and undoped HfO{sub 2} thin films and the interfacial structure is stable for Ti doped films. The composition of interfacial layer is most likely silicate and SiO{sub x}. Meanwhile, SE results indicate that the band gap of HfTiO thin films decreases with the increase in Ti concentration. Further results show that the valence band offset ({Delta}E{sub v}) decreases from 2.32 to 1.91 eV while the conduction band offset ({Delta}E{sub c}) decreases from 2.05 eV to 0.99 with the increase in Ti content. The optical constants consist of refractive index and extinction coefficient have also been investigated to provide the valuable references to prepare and select the HfTiO thin films for future high-k gate dielectrics.

36 MATERIALS SCIENCE↗

Optical, structural, and chemical properties of flash evaporated In{sub 2}S{sub 3} buffer layer for Cu(In,Ga)Se{sub 2} solar cells

In{sub 2}S{sub 3} layers were deposited by flash evaporation technique with varying flash rates. The optical constants of layers based on Tauc-Lorentz model dielectric function were extracted from spectroscopic ellipsometry measurements. X-ray photoelectron spectroscopic investigation revealed the presence of oxygen impurity in as-deposited and air-annealed layers with traces of Na inclusion in the layer grown at high flash rate. The enhancement in crystalline arrangement of as-deposited layer after air annealing was confirmed by Raman spectroscopy. Rutherford backscattering measurements revealed the growth of off-stoichiometric layers at all flash rates. An analytical layer growth model has been proposed supporting the results obtained by various layer characterization techniques. The solar cells were prepared with flash evaporated In{sub 2}S{sub 3} buffer layers and their performances were compared with CdS reference solar cell. A significant gain in short-circuit current was obtained after air annealing of the complete device at 200 deg. C for 20 min. A maximum conversion efficiency of 12.6% was delivered by a high flash rate In{sub 2}S{sub 3} buffered cell with open-circuit voltage close to that of CdS reference cell. The improvement in device performance after air annealing treatment is explained by thermally enhanced Cu and oxygen diffusion from Cu(In,Ga)Se{sub 2} and i-ZnO to In{sub 2}S{sub 3} layer, respectively.

36 MATERIALS SCIENCE↗

Broadening of optical transitions in polycrystalline CdS and CdTe thin films

The dielectric functions {epsilon} of polycrystalline CdS and CdTe thin films sputter deposited onto Si wafers were measured from 0.75 to 6.5 eV by in situ spectroscopic ellipsometry. Differences in {epsilon} due to processing variations are well understood using an excited carrier scattering model. For each sample, a carrier mean free path {lambda} is defined that is found to be inversely proportional to the broadening of each of the band structure critical points (CPs) deduced from {epsilon}. The rate at which broadening occurs with {lambda}{sup -1} is different for each CP, enabling a carrier group speed {upsilon}{sub g} to be identified for the CP. With the database for {upsilon}{sub g}, {epsilon} can be analyzed to evaluate the quality of materials used in CdS/CdTe photovoltaic heterojunctions.

36 MATERIALS SCIENCE↗

Low loss superconducting titanium nitride coplanar waveguide resonators

Thin films of TiN were sputter-deposited onto Si and sapphire wafers with and without SiN buffer layers. The films were fabricated into rf coplanar waveguide resonators, and internal quality factor measurements were taken at millikelvin temperatures in both the many photon and single photon limits, i.e., high and low electric field regimes, respectively. At high field, we found the highest internal quality factors ({approx}10{sup 7}) were measured for TiN with predominantly a (200)-TiN orientation. The (200)-TiN is favored for growth at high temperature on either bare Si or SiN buffer layers. However, growth on bare sapphire or Si(100) at low temperature resulted in primarily a (111)-TiN orientation. Ellipsometry and Auger measurements indicate that the (200)-TiN growth on the bare Si substrates is correlated with the formation of a thin, {approx_equal}2 nm, layer of SiN during the predeposition procedure. On these surfaces we found a significant increase of Q{sub i} for both high and low electric field regimes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced optical constants of nanocrystalline yttrium oxide thin films

Yttrium oxide (Y{sub 2}O{sub 3}) films with an average crystallite-size (L) ranging from 5 to 40 nm were grown by sputter-deposition onto Si(100) substrates. The optical properties of grown Y{sub 2}O{sub 3} films were evaluated using spectroscopic ellipsometry measurements. The size-effects were significant on the optical constants and their dispersion profiles of Y{sub 2}O{sub 3} films. A significant enhancement in the index of refraction (n) is observed in well-defined Y{sub 2}O{sub 3} nanocrystalline films compared to that of amorphous Y{sub 2}O{sub 3}. A direct, linear L-n relationship found for Y{sub 2}O{sub 3} films suggests that tuning optical properties for desired applications can be achieved by controlling the size at the nanoscale dimensions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Raman scattering analysis of silicon dioxide single crystal treated by direct current plasma discharge

Low-k materials such as silicon dioxide (SiO{sub 2}) play an important role in the semiconductor industry. Plasma has become indispensable for advanced materials processing. In this work a treatment of SiO{sub 2} single crystal by direct current plasma discharge is studied in detail. Offline metrology is conducted for silicon dioxide wafers by Raman scattering, energy-dispersive x-ray spectroscopy, and ellipsometry. Broad Raman peak at around 2800 cm{sup -1} is observed for the treated SiO{sub 2} wafers. Effects of plasma treatment on position of this peak are reported in the paper. An analysis of this correlation could be a framework for creating virtual etch rate sensors, which might be of importance in managing plasma etching processes.

36 MATERIALS SCIENCE↗

Mechanism of plasma-induced damage to low-k SiOCH films during plasma ashing of organic resists

Plasma-induced damage to porous SiOCH (p-SiOCH) films during organic resist film ashing using dual-frequency capacitively coupled O{sub 2} plasmas was investigated using the pallet for plasma evaluation method developed by our group. The damage was characterized by ellipsometry and Fourier-transform infrared spectroscopy. Individual and synergetic damage associated with vacuum ultraviolet (VUV) and UV radiation, radicals, and ions in the O{sub 2} plasma were clarified. It was found that the damage was caused not only by radicals but also by synergetic reactions of radicals with VUV and UV radiation emitted by the plasmas. It is noteworthy that the damage induced by plasma exposure without ion bombardment was larger than the damage with ion bombardment. These results differed from those obtained using an H{sub 2}/N{sub 2} plasma for resist ashing. Finally, the mechanism of damage to p-SiOCH caused by O{sub 2} and H{sub 2}/N{sub 2} plasma ashing of organic resist films is discussed. These results are very important in understanding the mechanism of plasma-induced damage to p-SiOCH films.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface Oxidation Effects During Low Energy BF{sub 2}{sup +} Ion Implantation

We present results on silicon wafer surface oxidation observed during low energy high dose BF{sub 2}{sup +} implantation. Experiments were performed on single-crystal and pre-amorphized silicon wafers that help elucidate the surface structure impact on boron distribution profiles and dose retention. Implanters with different architectures were compared including both single wafer and batch systems. It was found that the oxidation rate depends on implanter type and design, and that the surface oxide thickness is a linear function of implantation dose and time. Surface oxidation is significantly higher for batch systems compared to single wafer tools. This is due primarily to the significantly lower beam duty cycle on the batch implanter. The oxide thicknesses estimated from SIMS oxygen profiles are in agreement with ellipsometry measurements after spike annealing, and show a similar difference between single wafer and batch implanters. SIMS boron distribution profiles after implantation were compared and used to calculate retained dose. In the medium dose range ({<=}3x10{sup 14} at/cm{sup 2}) the profiles from different implanters are well matched and the dose retention is close to 100%. For the higher dose range ({>=}3x10{sup 15} at/cm{sup 2}) retention for the batch implanter is significantly less than the single wafer tool and depends on the wafer surface structure. A higher oxidation rate results in lower dopant activation and higher Rs value after spike annealing. For high implantation doses the single wafer system allows much higher dose retention and better boron activation after annealing.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Evaluation of Surface Damage of Organic Films due to Irradiation with Energetic Ion Beams

The surface of L-leucine films irradiated with an Ar{sub 5000} cluster ion beam (5 keV) was characterized by using the X-ray reflective (XRR) measurement method, atomic force microscopy (AFM) and ellipsometry. No significant damage was detected on the surface of the L-leucine films irradiated with the Ar cluster ion beam. Therefore, the large cluster-low-energy (about 1 eV/atom) beam would be suitable for low-damage etching of organic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size dependent optical properties of Si quantum dots in Si-rich nitride/Si{sub 3}N{sub 4} superlattice synthesized by magnetron sputtering

A spectroscopic ellipsometry compatible approach is reported for the optical study of Si quantum dots (QDs) in Si-rich nitride/silicon nitride (SRN/Si{sub 3}N{sub 4}) superlattice, which based on Tauc-Lorentz model and Bruggeman effective medium approximation. It is shown that the optical constants and dielectric functions of Si QDs are strongly size dependent. The suppressed imaginary dielectric function of Si QDs exhibits a single broad peak analogous to amorphous Si, which centered between the transition energies E{sub 1} and E{sub 2} of bulk crystalline Si and blue shifted toward E{sub 2} as the QD size reduced. A bandgap expansion observed by the TL model when the size of Si QD reduced is in good agreement with the PL measurement. The bandgap expansion with the reduction of Si QD size is well supported by the first-principles calculations based on quantum confinement.

36 MATERIALS SCIENCE↗

A strong magneto-optical activity in rare-earth La{sup 3+} substituted M-type strontium ferrites

M-type strontium ferrites with substitution of Sr{sup 2+} by rare-earth La{sup 3+} were prepared by conventional ceramic technology. The structure, magnetic properties, and magneto-optical Kerr activity of Sr{sub 1-x}La{sub x}Fe{sub 12}O{sub 19} (x = 0, 0.05, 0.10, 0.15, 0.20) were investigated by x-ray diffraction (XRD), vibrating sample magnetometer (VSM), and magneto-optical ellipsometry, respectively. X-ray diffraction showed that the samples sintered at 1290 deg. C for 3 h were single M-type hexagonal ferrites. The magnetic properties were remarkably changed due to the valence change of Fe ions induced by the substitution of La ions. Most significantly, an important magneto-optical activity was induced in the La{sup 3+} substituted M-type strontium ferrites around 3 eV.

36 MATERIALS SCIENCE↗

Dielectric properties of aluminum silver alloy thin films in optical frequency range

The dielectric properties of direct current (dc) magnetron sputtering aluminum silver alloy films in optical frequency have been quantitatively studied by variable angle spectroscopic ellipsometry. The structure and surface topography of the alloy films were characterized using scanning probe microscopy and x-ray diffraction. The Drude-Lorentz model was used to simulate the dielectric function of Al-Ag alloy films. Meanwhile, the effective medium theory has been utilized for the treatment of surface roughness. We found that the interband transition around 1.5 eV can be shifted through a variable annealing temperature and a changeable silver percentage of Al-Ag alloys.

36 MATERIALS SCIENCE↗

Phase change behavior in titanium-doped Ge{sub 2}Sb{sub 2}Te{sub 5} films

The titanium-doped Ge{sub 2}Sb{sub 2}Te{sub 5} films were deposited on Si(100) substrates by comagnetron sputtering method. The titanium concentrations in those films were determined by x-ray photoelectron spectroscopy. The influence of Ti doping upon phase change characteristics of the samples has been investigated by x-ray diffraction and a temperature-regulable UVISEL typed spectroscopic ellipsometry. With the augmentation of Ti doping concentration, the crystalline temperatures of the films went up while annealing, and the face-centered-cubic phase of them had high thermal stability because of the bond making between Ti and Te elements partly.

36 MATERIALS SCIENCE↗