SEARCH · Search NASA
Results for “Excel”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Metastable phases in Zr-Excel alloy and their stability under heavy ion (Kr2+) irradiation
Not Available
Dynamic Windows with Neutral Color, High Contrast, and Excellent Durability Using Reversible Metal Electrodeposition
Dynamic windows, which switch between transparent and opaque states upon application of a voltage, have applications in buildings, automobiles, and switchable sunglasses. Here, we describe dynamic windows based on the reversible electrodeposition of Cu and a second metal on transparent indium tin oxide electrodes modified by Pt nanoparticles. Three-electrode cyclic voltammetry experiments reveal that the system possesses high Coulombic efficiency (99.9%), indicating that the metal electrodeposition and stripping processes are reversible. Two-electrode 25-cm2 windows without bus bars uniformly switch between a transparent state (~80% transmission) and a color-neutral opaque state (<5% transmission) in less than 3 min. These devices switch at least 5,500 times without degradation of optical contrast, switching speed, or uniformity. Taken together, these results indicate that dynamic windows based on reversible metal electrodeposition are a promising alternative to those using traditional electrochromic materials.
A new carboxyl-copper-organic framework and its excellent selective absorbability for proteins
One-pot solvothermal treatments of CuCl{sub 2}·2H{sub 2}O, H{sub 2}L (5-(3-methyl-5-(pyridin-4-yl)-4H-1,2,4-triazol-4-yl) isophthalic acid) and Sm(NO{sub 3}){sub 3}·6H{sub 2}O in water yielded a rare carboxyl-copper-organic framework, [Cu(HL)]{sub n}·nH{sub 2}O (1). The existence of carboxyl groups in compound 1 may be due to the interference of Sm(NO{sub 3}){sub 3}·6H{sub 2}O at the relatively high temperature and autogenous pressure of the reaction. Compound 1 has been characterized by single-crystal X-ray diffraction, PXRD, IR, and elemental analysis. Compound 1 is a 3D coordination polymer, and an xfe-4-Fddd, (4{sup 2}.6.8{sup 3}) topology in 1 is created. In addition, the optical properties have been investigated. Rhodamine B dyeing experiments exhibited that there were residual carboxyl groups on the surface of compound 1. UV–vis results showed that more lysozyme was adsorbed onto the surface of compound 1 than BSA at pH 7.4. At the same time, XPS spectra were also investigated to verify the results. - Graphical abstract: One-pot solvothermal treatments of CuCl{sub 2}·2H{sub 2}O, H2L (5-(3-methyl-5-(pyridin-4-yl)-4H-1, 2, 4-triazol-4-yl) isophthalic acid) and Sm(NO{sub 3}){sub 3}·6H{sub 2}O in water yielded a rare carboxyl-copper-organic framework, [Cu(HL)]n·nH{sub 2}O (1). The existence of carboxyl groups in compound 1 may be due to the interference of Sm(NO{sub 3}){sub 3}·6H{sub 2}O at the relatively high temperature and autogenous pressure of the reaction. Compound 1 has been characterized by single-crystal X-ray diffraction, XRPD, IR, and elemental analysis. Compound 1 is a 3D coordination polymer, and an xfe-4-Fddd, (4{sup 2}.6.8{sup 3}) topology in 1 is created. In addition, the optical properties have been investigated. Rhodamine B dyeing experiments exhibited that there were residual carboxyl groups on the surface of compound 1. UV-vis results showed that more lysozyme was adsorbed onto the surface of compound 1 than that of BSA at pH 7.4. At the same time, XPS spectra were also investigated to verify the results. - Highlights: • A rare carboxyl-copper-organic framework has been hydrothermally synthesized. • An xfe-4-Fddd, (4{sup 2}.6.8{sup 3}) topology in 1 is created. • BSA was significantly less adsorbed onto the carboxylic acid-rich surface than lysozyme. • XPS spectra were also investigated to verify the results of protein adsorption.
Morphology-controlled synthesis of grass-like GO-CdSe nanocomposites with excellent optical properties and field emission properties
Four different morphologies of the CdSe semiconductor nanograss have been successfully grown on graphene oxide (GO) sheets via hydrothermal method at 220 °C for 12 h. The morphologies, structures, chemical compositions and optical properties of the as-obtained GO-CdSe nanocomposites were characterized by XRD, SEM, TEM, EDS, XPS and Raman spectra. It was found that the EDTA/Cd{sup 2+} molar ratio is important for the formation of morphology of GO-CdSe nanocomposites. The results of XRD revealed that all the as-obtained GO-CdSe nanocomposites have zinc blend structure. Room temperature photoluminescence (PL) showed that the sample emits red light under different excitation wavelengths. The results of Raman spectra, EDS and XPS showed that the CdSe nanograss is grown on GO sheets. The results showed that GO-CdSe nanocomposites composed of nanorods have best field emission (FE) properties with a low turn-on electric field of 4.14 V μm{sup −1} and a high field enhancement factor of 3315 among all the samples. - Graphical abstract: SEM images of as-synthesized CdSe nanograss grown on GO sheets. Room temperature PL emission spectra of the as-synthesized CdSe nanograss grown on GO sheets. Field emission J–E curve of the as-synthesized CdSe nanograss grown on GO sheets. - Highlights: • Novel CdSe nanograsses are grown on graphene oxide sheets by hydrothermal method. • The morphology of CdSe nanograsses is controlled by adjusting EDTA/Cd{sup 2+} molar ratio. • The FE performance of sample is investigated. • Optimum morphology for FE performance is CdSe nanograsses composed of nanorods on GO.
Graphene oxide foams and their excellent adsorption ability for acetone gas
Graphical abstract: - Highlights: • GO and RGO foams were prepared using a simple and green method, unidirectional freeze-drying. • The porous structure of the foams can be adjusted by changing GO concentrations. • GO and RGO foams show good adsorption efficiency for acetone gas. - Abstract: Graphene oxide (GO) and reduced graphene oxide (RGO) foams were prepared using a unidirectional freeze-drying method. These porous carbon materials were characterized by thermal gravimetric analysis, differential scanning calorimetry, X-ray photoelectron spectroscopy and scanning electron microscopy. The adsorption behavior of the two kinds of foams for acetone was studied. The result showed that the saturated adsorption efficiency of the GO foams was over 100%, and was higher than that of RGO foams and other carbon materials.
Facile synthesis and excellent catalytic performance of nitrogen-doped porous carbons derived from banana peel towards oxygen reduction reaction
Highlights: • This work demonstrates that rubbish can convert into valuable products and addresses the disposal issue of waste biomass. • The typical composite exhibits considerable catalytic activity which is comparable to Pt/C. • This method was accessible and an effective strategy for the large scale application of FCs. - Abstract: In this paper, nitrogen-doped porous carbons have been synthesized by using a facile low-cost and accessible approach. The banana peels which regarded as discarded rubbish were reused and acted as carbon source. The typical sample possesses plenty of interconnected pores, and its BET surface area is as large as 1442 m{sup 2} g{sup −1}. Electrochemical measurements indicates that the typical samples exhibits considerable catalyticactivity and high four-electron route selectivity, which is comparable or even superior to Pt/C in alkaline and acid mediums. Excitingly, the typical sample can even endure methanol-poisoning effect,and long term electrolytic corrosion with only 9.41% current density attenuation after 5000 consecutive cycles, which exceeds the performance of Pt/C in alkaline mediums. What’s more, this work demonstrates a successful example for turning discarded rubbish into valuable functional products as well as addresses the disposal issue of waste biomass and contributes to environment cleaning.
CuMn2O4/graphene nanosheets as excellent anode for lithium-ion battery
Highlights: • Spinel CuMn{sub 2}O{sub 4} and CuMn{sub 2}O{sub 4}/rGO are synthesized via a reflux route. • The electrochemical properties of CuMn{sub 2}O{sub 4}/rGO for LIBs are firstly explored. • CuMn{sub 2}O{sub 4}/rGO composites display a good battery performance. • Capacities of 1148 and 935 mA h g{sup −1} can be maintained after 20 and 150 cycles. - Abstract: Spinel copper manganese oxide (CuMn{sub 2}O{sub 4}) is synthesized via a reflux route and studied as anode for lithium-ion battery for the first time. In this work, graphene nanosheets are incorporated into the CuMn{sub 2}O{sub 4} composites to enhance the cycling performance of CuMn{sub 2}O{sub 4} material. Graphene nanosheets not only provide enough void space to buffer the volume expansion/contraction but also afford a conductive network to enhance the conductivity. The as-obtained CuMn{sub 2}O{sub 4}/graphene composites deliver a high discharge specific capacity of 935 mA h g{sup −1} after 150 cycles at a current density of 50 mA g{sup −1}. Additionally, reaction mechanism studies indicate that CuMn{sub 2}O{sub 4} transforms into nano-sized hybrid of CuO-MnO with a spongy porous structure during discharge-charge processes.
Preparation of novel BiVO4 nanofibers and their excellent adsorptive properties
Highlights: • Monoclinic BiVO{sub 4} nanofibers were obtained by two-step synthesis method. • BiVO{sub 4} nanofibers possessed highly effective adsorptive properties. • BiVO{sub 4} nanofibers showed higher specific surface area. • EG and NaOH promoted the formation of BiVO{sub 4} nanofibers. - Abstract: The novel BiVO{sub 4} nanofibers were firstly obtained by two-step synthesis method. Characterized by X-ray diffractometer (XRD) and scanning electron microscopy (SEM), the samples were shown to be nanofibers with monoclinic phase. The ethylene glycol (EG) and NaOH solution played an important role on their formation. Taking rhodamine B (RhB) as the removal object, the nanofibers exhibited the enhanced adsorptive activity compared with other samples. It may be due to the increase of the specific surface area, the acidic surface property of the BiVO{sub 4} nanofibers and the nature of the RhB dye. The formation mechanism of the special morphology was investigated and proposed. It is expected to provide some guidance for designing and preparing other materials for removal of organic pollutants.
Excellent high cyclic fatigue properties of a novel ultrafine-grained medium entropy alloy
Fatigue is a major cause of failure and requires dedicated investigation to validate the integrity of potential structural materials. As high and medium entropy alloys (HEAs and MEAs) are garnering significant attention from scientific communities, it is important to test the structural integrity of these novel alloys in cyclic loading environment. This study analyzed both monotonic and cyclic loading properties of a novel medium entropy alloy (MEA) CoCr 1.3 Ni in the ultrafine-grained (UFG) and fine grain (FG) conditions. The UFG MEA performs better than the FG MEA during cyclic loading. Microstructural evolution after cyclic loading via electron back-scattered diffraction shows microstructural stability of both FG and UFG microstructures. Transmission electron microscopy suggests formation of stacking faults and fine-scale HCP transformation during cyclic loading.
Ultralow content of Pt on Pd–Co–Cu/C ternary nanoparticles with excellent electrocatalytic activity and durability for the oxygen reduction reaction
Optimizing the utilization of Pt to catalyze the sluggish kinetics of the oxygen reduction reaction (ORR) is of vital importance in proton exchange membrane fuel cells. One of the strategies is to spread Pt atoms over the surface of a substrate to increase the surface area. We report a facile method to synthesize Pd6CoCu@Pt/C core-shell nanoparticles with an ultralow amount of Pt. It was found that Pt-coated layer on Pd6CoCu cores plays a vital role in enhancing the ORR activity and the cycling stability. The half-wave potential of Pd6CoCu@Pt/C positively shifts about 50 mV and 17 mV relative to Pd6CoCu/C and Pt/C, respectively. The Pt mass activity on Pd6CoCu@Pt/C was calculated to be about 27 times higher than that on Pt/C catalysts at 0.9 V. Furthermore, the Pd6CoCu@Pt/C nanoparticles exhibit superior stability with almost no decay for the ORR polarization curves during 10,000 potential cycles and the core-shell structure remains with only a slight increase in the thickness of the Pt overlayer. Our findings provide a methodology for synthesizing highly efficient catalytic materials for the cathodic application in fuel cells.