Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field Operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Observation of Nanoscale Morphological and Structural Degradation in Perovskite Solar Cells by In-Situ TEM

The chemical stability of organometallic halide perovskites is a major barrier facing their application in the fast rising field of next generation photovoltaics. These materials were shown to undergo degradation due to the influence of heat or moisture, significantly limiting the lifetime of associated devices. To overcome this stability issue, a fundamental understanding of degradation mechanisms is of foremost importance. Here, high resolution in situ transmission electron microscopy and electron energy loss spectroscopy elemental mapping were applied to probe morphological and structural changes in perovskite films during controlled environmental exposure treatments. Both moisture and oxygen in ambient air are revealed to facilitate degradation in CH 3 NH 3 PbI 3 perovskites through decomposition and oxidation pathways, respectively. In addition, even in moisture- and oxygen-free environment evident degradation could be induced by heating at the solar cell s real-field operating temperature and the degradation was found to originate from defect sites. These findings provide fundamental insight to prevent degradation of perovskite materials and associated devices for realistic applications.

14 SOLAR ENERGY↗
DOE OSTI2019

Geophysical Monitoring of Moisture-Induced Landslides: A Review

Geophysical monitoring of landslides can provide insights into spatial and temporal variations of subsurface properties associated with slope failure. Recent improvements in equipment, data analysis, and field operations have led to a significant increase in the use of such techniques in monitoring. Geophysical methods complement intrusive approaches, which sample only a very small proportion of the subsurface, and walk-over or remotely sensed data, which principally provide information only at the ground surface. In particular, recent studies show that advances in geophysical instrumentation, data processing, modeling, and interpretation in the context of landslide monitoring are significantly improving the characterization of hillslope hydrology and soil and rock hydrology and strength and their dynamics over time. This review appraises the state of the art of geophysical monitoring, as applied to moisture-induced landslides. Here we focus on technical and practical uses of time-lapse methods in geophysics applied to monitoring moisture-induced landslide. The case studies identified in this review show that several geophysical techniques are currently used in the monitoring of subsurface landslide processes. These geophysical contributions to monitoring and predicting the evolution of landslide processes are currently underrealized. Hence, the further integration of multiple-parametric and geotechnically coupled geophysical monitoring systems has considerable potential. The complementary nature of certain methods to map the distribution of subsurface moisture and elastic moduli will greatly increase the predictive and monitoring capacity of early warning systems in moisture-induced landslide settings.

58 GEOSCIENCES↗
DOE OSTI2018

3D field phase-space control in tokamak plasmas

Here, a small relaxation of the axisymmetric magnetic field of a tokamak into a non-axisymmetric three-dimensional (3D) configuration can be effective to control magnetohydrodynamic instabilities, such as edge-localized modes. However, a major challenge to the concept of 3D tokamaks is that there are virtually unlimited possible choices for a 3D magnetic field, and most of them will only destabilize or degrade plasmas by symmetry breaking. Here, we demonstrate the phase-space visualization of the full 3D field-operating windows of a tokamak, which allows us to predict which configurations will maintain high confinement without magnetohydrodynamic instabilities in an entire region of plasmas. We test our approach at the Korean Superconducting Tokamak Advanced Research (KSTAR) facility, whose 3D coils with many degrees of freedom in the coil space make it unique for this purpose. Our experiments show that only a small subset of coil configurations can accomplish edge-localized mode suppression without terminating the discharge with core magnetohydrodynamic instabilities, as predicted by the perturbative 3D expansion of plasma equilibrium and the optimizing principle of local resonance. The prediction provided excellent guidance, implying that our method can substantially improve the efficiency and fidelity of the 3D optimization process in tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Thermal stability of curved ray tomography for corrosion monitoring

Guided wave tomography is being developed as an effective tool for continuous monitoring of corrosion and erosion depth in pipelines. A pair of transmit- and receive-ring arrays of ultrasonic transducers encircles the pipe and delimits the section to be monitored. In curved ray tomography (CRT), the depth profile is estimated from the time delay matrix, Δτ, whose ij-th entry is the phase traveltime difference between the current and baseline signals measured between transducers i and j of the transmit and receive-ring arrays, respectively. Under perfectly stable experimental conditions, the non-zero entries of Δτ are only due to the occurrence of damage and provide a reliable input to CRT. However, during field operation, Δτ can develop non-zero entries due to a number of environmental changes ranging from temperature variations to degradation of transducer-pipe coupling and transducer intrinsic performance. Here, we demonstrate that these sources of instability can be eliminated by exploiting the spatial diversity of array measurements in conjunction with EMAT transducer technology which is intrinsically stable owing to its non-contact nature. The study is based on a full-scale experiment performed on a schedule 40, 8’ diameter, 3 m length steel pipe, monitored with two EMAT ring arrays. It is shown that for an irregularly shaped defect the proposed method yields maximum depth estimations that are as accurate as single point ultrasonic thickness gaging measurements and over a wide temperature range up to 175°C. The results indicate that advanced inversion schemes in combination with EMAT transduction offer great potential for continuously monitoring the progression of corrosion or erosion damage in the oil and gas industry.

42 ENGINEERING↗
DOE OSTI2015

Performance evaluation of OpenFOAM on many-core architectures

In this article application of Open Source Field Operation and Manipulation (OpenFOAM) C++ libraries for solving engineering problems on many-core architectures is presented. Objective of this article is to present scalability of OpenFOAM on parallel platforms solving real engineering problems of fluid dynamics. Scalability test of OpenFOAM is performed using various hardware and different implementation of standard PCG and PBiCG Krylov iterative methods. Speed up of various implementations of linear solvers using GPU and MIC accelerators are presented in this paper. Numerical experiments of 3D lid-driven cavity flow for several cases with various number of cells are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Plasma ignition and detection for in-situ cleaning of 1.3 GHz 9-cell cavities

Superconducting Radio Frequency (SRF) cavities performance preservation is crucial, from vertical test to accelerator operation. Field Emission (FE) is still one of the performance limiting factors to overcome and plasma cleaning has been proven successful by the Spallation Neutron Source (SNS), in cleaning field emitters and increasing the work function of Nb. A collaboration has been established between Fermi National Accelerator Laboratory (FNAL), SLAC National Accelerator Laboratory and Oak Ridge National Laboratory (ORNL) with the purpose of applying plasma processing to the Linac Coherent Light Source-II (LCLS-II) cavities, in order to minimize and overcome field emission without affecting the high Q of nitrogen-doped cavities. The cleaning for LCLS-II will follow the same plasma composition adopted at SNS, which allows in-situ processing of cavities installed in cryomodules from hydrocarbon contaminants. A novel method for plasma ignition has been developed at FNAL: a plasma glow discharge is ignited using high order modes to overcome limitations imposed by the fundamental power coupler, allowing in-situ cleaning for cavities in cryomodule. The plasma can be easily ignited and tuned in each of the cavity cells using low RF power. A method for plasma detection has been developed as well, which allows the detection of the plasma location in the cavity without the need of cameras at both cavity ends. The presented method can be applied to other multi-cell cavity designs, even for accelerators where the coupling for the fundamental modes at room temperature is very weak.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

General framework for calculating spin–orbit couplings using spinless one-particle density matrices: Theory and application to the equation-of-motion coupled-cluster wave functions

Standard implementations of nonrelativistic excited-state calculations compute only one component of spin multiplets (i.e., Ms = 0 triplets); however, matrix elements for all components are necessary for deriving spin-dependent experimental observables. Wigner–Eckart’s theorem allows one to circumvent explicit calculations of all multiplet components. We generate all other spin–orbit matrix elements by applying Wigner–Eckart’s theorem to a reduced one-particle transition density matrix computed for a single multiplet component. In addition to computational efficiency, this approach also resolves the phase issue arising within Born–Oppenheimer’s separation of nuclear and electronic degrees of freedom. A general formalism and its application to the calculation of spin–orbit couplings using equation-of-motion coupled-cluster wave functions are presented. The two-electron contributions are included via the mean-field spin–orbit treatment. Intrinsic issues of constructing spin–orbit mean-field operators for open-shell references are discussed, and a resolution is proposed. The method is benchmarked by using several radicals and diradicals. The merits of the approach are illustrated by a calculation of the barrier for spin inversion in a high-spin tris(pyrrolylmethyl)amine Fe(II) complex.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Viewing convection as a solar farm phenomenon broadens modern power predictions for solar photovoltaics

We report heat mitigation for large-scale solar photovoltaic (PV) arrays is crucial to extend lifetime and energy harvesting capacity. PV module temperature is dependent on site-specific farm geometry, yet common predictions consider panel-scale and environmental factors only. Here, we characterize convective cooling in diverse PV array designs, capturing combined effects of spatial and atmospheric variation on panel temperature and production. Parameters, including row spacing, panel inclination, module height, and wind velocity, are explored through wind tunnel experiments, high-resolution numerical simulations, and operating field data. A length scale based on fractal lacunarity encapsulates all aspects of arrangement (angle, height, etc.) in a single value. When applied to the Reynolds number Re within the canonical Nusselt number heat transfer correlation, lacunarity reveals a relationship between convection and farm-specific geometry. This correlation can be applied to existing and forthcoming array designs to optimize convective cooling, ultimately increasing production and PV cell life.

14 SOLAR ENERGY↗
DOE OSTI2018

Evidence for preferential flux flow at the grain boundaries of superconducting RF-quality niobium

Here, the question of whether grain boundaries (GBs) in niobium can be responsible for lowered operating field (B RF ) or quality factor (Q 0 ) in superconducting radio-frequency (SRF) cavities is still controversial. Here, we show by direct DC transport across planar grain boundaries isolated from a slice of very large-grain SRF-quality Nb that vortices can preferentially flow along the grain boundary when the external magnetic field lies in the GB plane. However, increasing the misalignment between the GB plane and the external magnetic field vector markedly reduces preferential flux flow along GB. Importantly, we find that preferential GB flux flow is more prominent for a buffered chemical polished than for an electropolished bi-crystal. The voltage-current characteristics of GBs are similar to those seen in low angle grain boundaries of high temperature superconductors where there is clear evidence of suppression of the superconducting order parameter at the GB. While local weakening of superconductivity at GBs in cuprates and pnictides is intrinsic, deterioration of current transparency of GBs in Nb appears to be extrinsic, since the polishing method clearly affect the local GB degradation. The dependence of preferential GB flux flow on important cavity preparation and experimental variables, particularly, the final chemical treatment and the angle between the magnetic field and the GB plane, suggests two more reasons why real cavity performance can be so variable.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Designing monitoring networks for local earthquakes

Abstract Seismic networks are essential for monitoring local earthquakes in connection to industrial activities, including wastewater injection and CO2 sequestration. Because these networks are typically deployed for short periods of time at specific sites, it is beneficial to develop best practices for efficient and effective installation and monitoring. Such standards are available for regional earthquake and microseismic monitoring, but not readily available for local scale (tens of kilometer scale) monitoring. Once the region of interest has been determined, the key parameters for establishing a network are available monitoring station locations, site noise, and site utility. Networks should be designed based on the project monitoring goals for earthquake magnitude and density. Herein, a network was established at the Patterson and Hartland Oil Fields in western Kansas in association with a US Department of Energy CarbonSAFE carbon capture and sequestration research project. We employed observations from an analog local network, the Wellington Earthquake Monitoring Network in south-central Kansas, to assess site noise and estimate earthquake detection thresholds for the Patterson and Hartland fields. Noise from oil production facilities was evaluated, concluding that oil lease sites are suitable for monitoring small local earthquakes (M1-M3). The network was designed to have a magnitude of completeness of M1 while using station locations on existing field operator leases. Fifteen months of continuous network operation demonstrates reliable and efficient local earthquake monitoring and provides best practices recommendations for similar operations.

58 GEOSCIENCES↗
DOE OSTI2025

First study of polarized proton-proton scattering with small-𝑥 helicity evolution

We perform a phenomenological study of helicity-dependent parton distribution functions (PDFs) using small-𝑥 helicity evolution equations, incorporating for the first time single-inclusive jet production data in polarized proton-proton (𝑝⁢𝑝) scattering at parton momentum fractions 𝑥 <0.1. We also simultaneously include double-longitudinal spin asymmetries in inclusive and semi-inclusive deep-inelastic scattering probing 𝑥 <0.1. Employing the polarized small-𝑥 pure-glue calculation of 𝑝⁢𝑝 → 𝑔⁡𝑋 for the jet production cross section, we modify the large-𝑁 𝑐 &𝑁 𝑓 KPS-CTT evolution equations by setting 𝑁 𝑓 = 0 to replicate the large-𝑁𝑐 (pure-glue) limit, while retaining external quark flavors for the spinor field operators. We find that the 𝑝⁢𝑝 data have a considerable impact on the helicity PDFs at small 𝑥, reducing their uncertainties and leading to a total quark and gluon helicity in the proton for 𝑥 < 0.1 of −0.04 ±0.23. Combining our analysis with a recent JAM helicity PDF analysis of the world polarized data, which includes 𝑥 > 0.1, we find a total quark and gluon helicity contribution for 𝑥 >10 −7 of between 0.02 and 0.51.

Adamiak, Daniel [Michigan State University] (ORCID↗
DOE OSTI2019

Heisenberg-scaling measurement protocol for analytic functions with quantum sensor networks

Here we generalize past work on quantum sensor networks to show that, for d input parameters, entanglement can yield a factor O(d) improvement in mean-squared error when estimating an analytic function of these parameters. We show that the protocol is optimal for qubit sensors, and we conjecture an optimal protocol for photons passing through interferometers. Our protocol is also applicable to continuous variable measurements, such as one quadrature of a field operator. We outline a few potential applications, including calibration of laser operations in trapped ion quantum computing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

High-gradient performance of a prototype accelerator cavity for a 3 GeV proton radiography booster

This paper reports the design, fabrication, and results of the high-gradient conditioning and testing for a two-cell, π -mode, standing wave normal-conducting prototype booster cavity for the proposed 3 GeV proton linac upgrade at Los Alamos Neutron Science Center. Increasing the energy of proton beam from the existing 800 MeV to 3 GeV will improve resolution of the proton radiography by up to 10 times. The proposed energy boost can be achieved with a compact normal-conducting high-gradient radio-frequency (rf) linac section. The C-band section of the booster linac was designed with optimized-shaped copper accelerator cavities with distributed rf coupling. A short two-cell test prototype structure was designed for the frequency of 5.712 GHz, fabricated, and tested at the C-band Engineering Research Test Facility in New Mexico (CERF-NM) at Los Alamos National Laboratory. The maximum klystron power coupled into the test structure was 8.3 MW with 1 μ s pulse length and 100 Hz repetition rate. The breakdown probabilities were recorded as functions of the accelerating gradient and peak surface fields. Operation of the test cavity at accelerating gradients of up to 100 MV / m was demonstrated. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗
DOE OSTI2014

Metal-Insulator Photocathode Heterojunction for Directed Electron Emission

New photocathode materials capable of producing intense and directed electron pulses are needed for development of next generation light sources and dynamic transmission electron microscopy. Ideal photocathodes should have high photoemission quantum efficiency (QE) and be capable of delivering collimated and well-shaped pulses of consistent charge under high-field operating conditions. High-brightness and low-intrinsic emittance electron pulses have been predicted for hybrid metal-insulator photocathode designs constructed from three to four monolayer MgO films on atomically flat silver. Here we use angle-resolved photoelectron spectroscopy to confirm directional photoemission and a large increase in QE under ultraviolet laser excitation of an ultrathin MgO film on Ag(001). We observe new low-binding energy photoemission, not seen for Ag(001), and greater electron emission in the normal direction. Under 4.66 eV laser excitation, the photoemission quantum efficiency of the MgO/Ag(001) hybrid photocathode is a factor of seven greater than that for clean Ag(001).

Environmental Molecular Sciences Laboratory↗
DOE OSTI2021

Optimization of Carbon-Nanotube-Reinforced Composite Gridlines Towards Commercialization

Solar cells in PV modules crack during field operation from environmental stressors, including extreme weather events, such as hailstorms and hurricanes. These cracks can lead to gradual or immediate acute power degradation. To directly address cell-crack-induced degradation, we have formulated a carbon nanotube additive for commercial screen printed silver pastes. We have shown in previous work that these metal matrix composites have little to no effect on the cell’s efficiency while enhancing the metallization’s fracture toughness and electrical gap-bridging capability. In this work, we focus on optimizing the composite metallization to achieve the best possible performance. We discover that reducing carbon nanotube agglomerations in the paste not only improves the printability for narrow gridlines, but also increases the modulus of toughness of the metallization by over 500%.

carbon nanotubes↗
DOE OSTI2016

Development of a 15 T Nb 3 Sn accelerator dipole demonstrator at Fermilab

Here, a 100 TeV scale Hadron Collider (HC) with a nominal operation field of at least 15 T is being considered for the post-LHC era, which requires using the Nb 3 Sn technology. Practical demonstration of this field level in an accelerator-quality magnet and substantial reduction of the magnet costs are the key conditions for realization of such a machine. FNAL has started the development of a 15 T Nb 3 Sn dipole demonstrator for a 100 TeV scale HC. The magnet design is based on 4-layer shell type coils, graded between the inner and outer layers to maximize the performance and reduce the cost. The experience gained during the Nb 3 Sn magnet R&D is applied to different aspects of the magnet design. This paper describes the magnetic and structural designs and parameters of the 15 T Nb 3 Sn dipole and the steps towards the demonstration model fabrication.

43 PARTICLE ACCELERATORS↗
DOE OSTI2016

Design Study of a 16-T Block Dipole for FCC

© 2016 IEEE. The Future Circular Collider (FCC) study at CERN is investigating the design of a proton-proton collider with a center of mass energy of 100 TeV and a tunnel circumference of 100 km (FCC-hh). Nb3Sn arc dipoles with 50-mm aperture and 16-T operating field are required for this application. Among the possible magnetic layouts, block coils offer attractive features, in terms of conductor packing, separation between high-field and high-stress locations, use of flat cables, and simpler geometries for windings and parts. In order to assess these potential advantages, the HD series of block-coil models was developed at LBNL. These models achieved fields of 15-16 T in technology tests, and 13-14 T in accelerator relevant configurations, with bore diameters of 36-43 mm. In this paper, we discuss the implications of increasing the bore diameter to 50 mm, which is consistent with the latest FCC-hh design targets. A detailed quench protection analysis is performed using the new coupling-loss-based CLIQ system, expanding the safe parameter space with respect to the traditional approach based on quench heaters. Finally, alternative magnet design options, and further studies required to select among them, are outlined.

Sabbi, Gianluca↗
DOE OSTI2018

FEA Model and Mechanical Analysis of the Nb 3 Sn 15-T Dipole Demonstrator

Nb$_{3}$Sn magnets with a nominal operation field of ~15 T are being considered for the large hadron collider (LHC) energy upgrade high-energy large hadron collider (HE-LHC) and a post-LHC future circular collider. To demonstrate the feasibility of 15-T accelerator quality dipole magnets, the U.S. magnet development program is developing a single-aperture 15-T Nb$_{3}$Sn dipole demonstrator based on a 4-layer graded cos-theta coil with 60 mm aperture and cold iron yoke. The main design challenges for 15-T accelerator magnets include large Lorentz forces at this field level. To counteract them, an innovative mechanical structure based on a vertically split iron yoke, locked by large aluminum IC-clamps and supported by a thick stainless steel skin, has been developed at Fermilab. To study the performance of the structure, a parametric multiphysics finite element analysis (FEA) model has been set up. This paper describes the numerical model as well as the results of a sensitivity analysis of the effect of geometrical tolerances and assembly parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗