Search NASA⌕ Search

SEARCH · Search NASA

Results for “Formats”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Double layer formation

An investigation is conducted of the plasma processes which occur during the formation of a double layer in response to an applied initial electric field, when triggered by a current in the plasma. The important feature of the formation process was the creation of an ion-rich plasma-density cavity. The positive space charge of the cavity was shielded by induction of a negative space charge on the low potential side of the cavity, giving rise to the formation of a fully developed double layer. The shielding was complete only when the electron current from the low potential side exceeded the electron thermal current. It was found that during the formation of double layers counterstreaming electrons are generated. Moreover, transient double layers with reverse polarity also occur during this phase. Thus, the recurring formation of double layers can give rise to flickering double layers.

Singh, N.↗

Oxidation and formation of deposit precursors in hydrocarbon fuels

The oxidation of two jet turbine fuels and some pure hydrocarbons was studied at 130 C with and without the presence of small amounts of N-methyl pyrrole (NMP) or indene. Tendency to form solid-deposit precursors was studied by measuring soluble gum formation as well as dimer and trimer formation using field ionization mass spectrometry. Pure n-dodecane oxidized fastest and gave the smallest amount of procursors. An unstable fuel oil oxidized much slower but formed large amounts of precursors. Stable Jet A fuel oxidized slowest and gave little precursors. Indene either retarded or accelerated the oxidation of n-dodecane, depending on its concentration, but always caused more gum formation. The NMP greatly retarded n-dodecane oxidation but accelerated Jet A oxidation and greatly increased the latter's gum formation. In general, the additive reacted faster and formed most of the gum. Results are interpreted in terms of classical cooxidation theory. The effect of oxygen pressure on gum formation is also reported.

Mayo, F. R.↗

Deposit formation in hydrocarbon rocket fuels: Executive summary

An experimental program was conducted to study deposit formation in hydrocarbon fuels under flow conditions that exist in high-pressure, rocket engine cooling systems. A high pressure fuel coking test apparatus was designed and developed and was used to evaluate thermal decomposition (coking) limits and carbon deposition rates in heated copper tubes for two hydrocarbon rocket fuels, RP-1 and commercial-grade propane. Tests were also conducted using JP-7 and chemically-pure propane as being representative of more refined cuts of the baseline fuels. A parametric evaluation of fuel thermal stability was performed at pressures of 136 atm to 340 atm, bulk fuel velocities in the range 6 to 30 m/sec, and tube wall temperatures in the range 422 to 811K. In addition, the effect of the inside wall material on deposit formation was evaluated in selected tests which were conducted using nickel-plated tubes. The results of the tests indicated that substantial deposit formation occurs with RP-1 fuel at wall temperatures between 600 and 800K, with peak deposit formation occurring near 700K. No improvements were obtained when de-oxygenated JP-7 fuel was substituted for RP-1. The carbon deposition rates for the propane fuels were generally higher than those obtained for either of the kerosene fuels at any given wall temperature. There appeared to be little difference between commercial-grade and chemically-pure propane with regard to type and quantity of deposit. The results of tests conducted with RP-1 indicated that the rate of deposit formation increased slightly with pressure over the range 136 atm to 340 atm. Finally, plating the inside wall of the tubes with nickel was found to significantly reduce carbon deposition rates for RP-1 fuel.

Roback, R.↗

Self-regulating star formation - The rate limit set by ionizing photons

In the present investigation the possibility is explored that during galaxy formation the gas has the capacity to generate stars so rapidly that the back reaction of the young stars on the gas sets the limiting rate. Sources which could supply significant negative feedback include stellar winds, ionizing UV, and supernova explosions. However, only the simplest of these, the heating by ionizing UV, is currently considered. The UV production associated with a given amount of star formation is calculated, and the critical UV production rate above which the UV heating quenches star formation is estimated. It is argued that in the absence of more powerful limiting mechanisms the star formation will stabilize to provide this critical UV emissivity. It is found that this rate is in fact similar to that which galaxy formation models imply has actually occurred.

Cox, D. P.↗

Effect of spaceflight on periosteal bone formation in rats

Male Wistar rats were placed in orbit for 18.5 days aboard the Soviet COSMOS 1129 biological satellite. Tetracycline was administered before and after spaceflight to label areas of bone formation. An inhibition of periosteal bone formation occurred during spaceflight in the tibial and humeral diaphyses, but this defect was corrected during the postflight period. The increased extent of arrest lines at these skeletal sites suggested that periosteal bone formation may have even ceased during spaceflight. The rib exhibited a small but nonsignificant decrease in periosteal bone formation. Endosteal bone resorption was not affected markedly by spaceflight conditions. The observed inhibition of periosteal bone formation may be a result of mechanical unloading, but endocrine factors cannot be ruled out.

Wronski, T. J.↗

The formation of stellar systems from interstellar molecular clouds

The observational and theoretical study of regions of continuing star formation promises greater insight into the physical conditions and events associated with the formation of the solar system, and elucidates the role played by star formation in the evolutionary cycle which seems to dominate interstellar material's processing by successive generations of stars in the spiral galaxies. Novel astronomical methods incorporated by the new facilities scheduled for development in the 1980s may yield substantial advancements in star formation process theory; most significant among these efforts will be the identification and examination of the elusive protostellar collapse phase of both star and planetary system formation.

Gehrz, R. D.↗

Shock tube study of the fuel structure effects on the chemical kinetic mechanisms responsible for soot formation, part 2

Soot formation in oxidation of allene, 1,3-butadiene, vinylacetylene and chlorobenzene and in pyrolysis of ethylene, vinylacetylene, 1-butene, chlorobenzene, acetylen-hydrogen, benzene-acetylene, benzene-butadiene and chlorobenzene-acetylene argon-diluted mixtures was studied behind reflected shock waves. The results are rationalized within the framework of the conceptual models. It is shown that vinylacetylene is much less sooty than allene, which indicates that conjugation by itself is not a sufficient factor for determining the sooting tendency of a molecule. Structural reactivity in the context of the chemical kinetics is the dominant factor in soot formation. Detailed chemical kinetic modeling of soot formation in pyrolysis of acetylene is reported. The main mass growth was found to proceed through a single dominant route composed of conventional radical reactions. The practically irreversible formation reactions of the fused polycyclic aromatics and the overshoot by hydrogen atom over its equilibrium concentration are the g-driving kinetic forces for soot formation.

Frenklach, M.↗

The star-formation history of very young clusters

The popular idea that star formation has proceeded sequentially from lowest to highest mass members in open clusters is examined critically. For extremely young clusters, such as NGC 2264 and NGC 6530, this sequential hypothesis is a consequence of the assignment of pre-main-sequence contraction ages to all member stars. However, such ages yield a formation history which is implausible from a physical point of view, since the critical time for the onset of formation at any stellar mass is equal to the pre-main-sequence contraction time for that mass. Moreover, these ages are in conflict with the strong observational evidence that a substantial fraction of cluster members have already reached the main sequence. After reconsideration of the probable main-sequence members, the stellar ages in NGC 2264 and NGC 6530 are consistent with a variety of formation histories, and, in particular, with the view that all stellar masses form in approximately the same interval of time within a given cluster, i.e., that there is no mass-age correlation. A notion closely related to the sequential hypothesis, that the total star-formation rate increases exponentially with time, is subject to the same criticism.

Stahler, S. W.↗

Star formation - An overview

Methods for studying star formation are reviewed. Stellar clusters and associations, as well as field stars, provide a fossil record of the star formation process. Regions of current star formation provide a series of snapshots of different epochs of star formation. A simplified picture of individual star formation as it was envisioned in the late 1970s is contrasted with the results of recent observations, in particular the outflow phenomenon.

Evans, N. J., II↗

Initial development and performance evaluation of a process for formation of dense carbon by pyrolysis of methane

The three steps in pyrolytic carbon formation are: (1) gaseous hydrocarbon polymerization and aromatic formation; (2) gas-phase condensation and surface adsorption/impingement of polyaromatic hydrocarbon; and (3) final dehydration to carbon. The structure of the carbon in the various stages of formation is examined. The apparatuses and experimental procedures for the pyrolysis of methane in a 60 cm long quartz reactor tube at temperatures ranging from 1400-1600 K are described. The percentage of carbon converted and its density are calculated and tabularly presented. The results reveal that dense carbon formation is maximized and soot eliminated by this procedure. It is observed that conversion efficiency depends on the composition of the inlet gas and conversion increases with increasing temperature. Based on the experimental data a three-man carbon reactor subsystem (CRS) is developed; the functions of the Sabatier Methanation Reactor, two carbon formation reactors and fluid handling components of the CRS are analyzed. The CRS forms 16 kg of carbon at a rate of 0.8 kg/day for 20 days in a two percent volume density quartz wool packing at temperature of 1500-1600 K.

Noyes, G. P.↗

Formation of the sun and its planets

Aspects of star formation are considered, taking into account those observations and models which have a relation to the formation of the solar system. Attention is given to the galactic structure, the stellar properties, planetary indications, interstellar clouds, observations of forming stars, the conditions for cloud collapse, models of star formation, the modeling of secondary features, and aspects of dynamical evolution. Aspects of cosmochemistry are also explored. Questions of chronology are discussed along with nuclide variations, chemical variations among chondritic meteorites, and chemical variations among differentiated objects. A description of planet formation is provided, taking into consideration, gas-dust interaction, sun and accretion disk dynamics, planetesimal swarms, planet-disk interactions, planetary systems, terrestrial planet formation, and gaseous protoplanet contraction.

Kaula, W. M.↗

Molecular cloud evolution and star formation

The present state of knowledge of the relationship between molecular clouds and young stars is reviewed. The determination of physical parameters from molecular line observations is summarized, and evidence for fragmentation of molecular clouds is discussed. Hierarchical fragmentation is reviewed, minimum fragment scales are derived, and the stability against fragmentation of both spherically and anisotropically collapsing clouds is discussed. Observational evidence for high-velocity flows in clouds is summarized, and the effects of winds from pre-main sequence stars on molecular gas are discussed. The triggering of cloud collapse by enhanced pressure is addressed, as is the formation of dense shells by spherical outflows and their subsequent breakup. A model for low-mass star formation is presented, and constraints on star formation from the initial mass function are examined. The properties of giant molecular clouds and massive star formation are described. The implications of magnetic fields for cloud evolution and star formation are addressed.

Silk, J.↗

The frequency of enhanced star formation in interacting and isolated galaxies

To probe the sensitivity of the star formation rate and extent in galaxies to gravitational encounters, ground based near and mid-infrared and IRAS far-infrared measurements of complete samples of isolated and interacting pairs of galaxies were obtained. The observed infrared properties of the isolated galaxies are used to gauge the magnitude of star formation in galaxies free from external influences, and to define the relationships between morphological type and infrared luminosity. These properties were contrasted with those of the interacting sample to examine the extent to which interactions can enhance or alter the nature of star formation. The mechanisms by which interactions influence activity such as star formation are investigated through correlations of the infrared characteristics with radio and optical measurements, and with morphological and physical parameters such as galaxy types, separations, encounter velocities and interaction types. Limits to the physical extent of the star formation are obtained by comparing the large aperture measurements of IRAS with the small aperture ground based photometry.

Cutri, Roc M.↗

High-mass star formation due to cloud-cloud collisions

Observational evidence is presented for the compression of molecular gas in the interface between colliding GMCs, and it is proposed that this is the dominant mode for high-mass star formation in the Galaxy. For a sample of 94 GMCs associated with high-luminosity radio H II regions, the efficiency of OB star formation decreases significantly with increasing cloud mass over the observed mass range. It is concluded that star formation is generally not stimulated by an internal mechanism. The formation of OB stars by cloud-cloud collisions is suggested by the observed quadratic dependence of the Galactic H II region distribution on the local density of H2. The preference for OB star formation in spiral arms is then naturally accounted for by orbit crowding and the increased collision frequency of clouds in the spiral arms.

Scoville, N. Z.↗

A calorimetric determination of the enthalpy of formation and a description of the defect structure of the ordered beta-phase /Ni, Cu/ /1-x/ Al/x/

In order to describe thermodynamically the defect structure of an ordered B-Hume-Rothery phase, the heat of formation of (Ni,Cu)(1-x)Al(x) was measured at 1100 K as a function of concentration in the range x (sub Al) = 0.4 and 0.55 for three substitution rations x (sub Ni)/x (sub Cu) = infinity; 11; 5. The heat of formation of the NiAl beta-phase is strongly negative. For the stoichiometric composition it is -72.2 kJ/g-atom. On both the nickel-rich side and the aluminum-rich side the magnitude of the enthalpy of formation decreases linearly with concentration. Substitution of nickel for copper decreases the magnitude of the enthalpy of formation over the entire homogeneity range for the phase (Ni,Cu)(1-x)Al(x). The curve for the enthalpy of formation as well as the literature values for the chemical potential of aluminum are described with great accuracy by the disorder model of Wagner-Schottky.

Henig, E. T.↗

Telemetry formats for the Space Station RF links

This paper discusses the formats that have been proposed for the manned Space Station space/ground RF link. In addition to discussing the specific RF formats, the paper seeks to discuss the requirements that have caused the proposed format to exist in its current form. The paper begins by briefly discussing the historical basis for telemetry formats within NASA, and then discusses the unique requirements that the Space Station imposes, compared to traditional space probes. The paper next treats the overall requirements that must be satisfied by the Space Station communications system. Finally the paper discusses the details of the RF format and its proposed operational usage.

Marker, Walter↗

The formation of topological defects in phase transitions

It was argued, and fought through numerical work that the results of non-dynamical Monte Carlo computer simulations cannot be applied to describe the formation of topological defects when the correlation length at the Ginzburg temperature is significantly smaller than the horizon size. To test the current hypothesis that infinite strings at formation are essentially described by Brownian walks of size the correlation length at the Ginzburg temperature, fields at the Ginzburg temperature were equilibrated. Infinite structure do not exist in equilibrium for reasonable definitions of the Ginzburg temperature, and horizons must be included in a proper treatment. A phase transition, from small-scale to large-scale string or domain wall structure, is found to occur very close to the Ginzburg temperature, in agreement with recent work. The formation process of domain walls and global strings were investigated through the breaking of initially ordered states. To mimic conditions in the early Universe, cooling times are chosen so that horizons exist in the sample volume when topological structure formation occurs. The classical fields are evolved in real-time by the numerical solution of Langevin equations of motion on a three dimensional spatial lattice. The results indicate that it is possible for most of the string energy to be in small loops, rather than in long strings, at formation.

Hodges, Hardy M.↗

Formation of the earth

The origin of the earth is discussed in the context of the formation of the sun and the planets, and a standard model for such a formation assuming gravitational instability in a dense interstellar molecular cloud is outlined, along with the most significant variant of the model in which the loss of the nebular gas occurred after the formation of the earth. The formation of the sun and solar nebulae is addressed, and the coagulation of grains and the formation of small planetesimals are covered, along with the gravitational accumulation of planetesimals into planetary embryos and final stages of accumulation - embryos of planets. It is pointed out that the final stage of accumulation consists of the collision of these embryos; because of their large size, particularly after their further growth, these collisions represent giant impacts. It is concluded that the earth was initially an extremely hot and melted planet, surrounded by a fragile atmosphere and subject to violent impacts by bodies of the size of Ceres and even the moon.

Wetherill, George W.↗