Search NASA⌕ Search

SEARCH · Search NASA

Results for “GRAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Lightweight helmet-mounted eye movement measurement system

The helmet-mounted eye movement measuring system, weighs 1,530 grams; the weight of the present aviators' helmet in standard form with the visor is 1,545 grams. The optical head is standard NAC Eye-Mark. This optical head was mounted on a magnesium yoke which in turn was attached to a slide cam mounted on the flight helmet. The slide cam allows one to adjust the eye-to-optics system distance quite easily and to secure it so that the system will remain in calibration. The design of the yoke and slide cam is such that the subject can, in an emergency, move the optical head forward and upward to the stowed and locked position atop the helmet. This feature was necessary for flight safety. The television camera that is used in the system is a solid state General Electric TN-2000 with a charged induced device imager used as the vidicon.

Barnes, J. A.↗
NASA NTRS1978

Lightweight multiple output converter development

A high frequency, multiple output power conditioner was developed and breadboarded using an eight-stage capacitor diode voltage multiplier to provide +1200 Vdc, and a three-stage for -350 Vdc. In addition, two rectifier bridges were capacitively coupled to the eight-stage multiplier to obtain 0.5 and 0.65 a dc constant current outputs referenced to +1200 Vdc. Total power was 120 watts, with an overall efficiency of 85 percent at the 80 kHz operating frequency. All outputs were regulated to three percent or better, with complete short circuit protection. The power conditioner component weight and efficiency were compared to the equivalent four outputs of the 10 kHz conditioner for the 8 cm ion engine. Weight reduction for the four outputs was 557 grams; extrapolated in the same ratio to all nine outputs, it would be 1100 to 1400 grams.

Kisch, J. J.↗
NASA NTRS1979

Microbial transformation of nucleosides

A study involving the use of coulter counter in studying the effects of neomycin on E. coli, S. aureus and A. aerogenes was completed. The purpose of this was to establish proper technique for enumeration of cells per ml. It was found that inhibitory effects on growth of E. coli and A. aerogenes, both gram negative organisms, were directly related to the concentration of neomycin used. However, in case S. aureus, a gram positive organism, a decreased inhibition was noted at higher concentrations. A paper entitled, Use of Coulter Counter in Studying Effect of Drugs on Cells in Culture 1 - Effects of Neomycin on E. coli, S. aureus and A. aerogenes, is attached in the appendix. Laboratory procedures were also established to study the effects of nucleoside antibiotic cordycepin on He La cell grown in suspension cultures.

Lamba, S. S.↗
NASA NTRS1978

Ultra-thin silicon solar cells for high performance panel applications

Solar cells have been fabricated which achieved the highest power to mass ratios and radiation stability yet reported for silicon devices. The thinnest cells (.04 mm) had initial efficiencies in excess of 2 watts per gram (AMO) and 1.7 watts per gram after an irradiation of 1 x 10 to the 15th equivalent 1 MeV electrons per square centimeter. The cells have been successfully interconnected by welding and filtered using a FEP bonded, ceria-doped microsheet of six mil thickness. Handling losses during cell manufacture and panel assembly may be minimized through the use of an integral reinforcing perimeter or ribs which remove almost all restrictions on cell thickness and area. Such a cell is typically composed of a main section which can be as thin as 0.015 mm and is supported at the edge by a thicker border (0.20 mm) of silicon.

Gay, C. F.↗
NASA NTRS1980

The contribution of cometary volatiles to the primitive earth

It has been estimated that during its early history the earth captured a mass of cometary material of the order of 10 to the 23rd grams. Since carbon is supposed to be at least three times more abundant in comets than in carbonaceous chondrites (3.5 percent C in C 1 chondrites), it can be deduced that about 1 x 10 to the 22nd grams of carbon (as carbon compounds), were added by comets to the surface of the prebiotic earth. This carbon value is of the same order of magnitude as the value of the organic carbon buried in the earth's sedimentary shell, but approximately one order of magnitude lower than the earth's surface total carbon (7 x 10 to the 22nd gm). The capture of comets by the earth would also have contributed to generating the appropriate aqueous and reducing environmental conditions necessary for organic synthesis.

Oro, J.↗
NASA NTRS1976

Spectroscopy of small cometary particles

Knowledge of chemical composition derived from the spectroscopy of small cometary meteoroids when they enter the Earth's atmosphere at high velocity and become visible as meteors is briefly summarized. For statistically reliable results it is necessary to have a large number of observations and this requires the photography of relatively faint meteors, which are considerably more numerous than the bright fireballs. The improvement in observational techniques and cameras has made it possible to extend the range of spectrographic data from cometary particles of mass between a kilogram and a gram down to those of only 0.01 or 0.001 grams in mass. The corresponding increase in the number-value of the statistics was from less than 100 data points to several 1000.

Millman, P. M.↗
NASA NTRS1981

Development of silane-hydrolysate binder for UV-resistant thermal control coatings

Detailed characterizaton and formulation studies were performed on a methyltriakoxysilane hydrolysate as a binder for thermal control coatings. The binder was optimized by varying hydrolysis temperature, time, catalyst type, and water concentration. The candidate coating formulations, based on this binder with TiO2 pigment, were optimized via a detailed series of sprayed test panels that included the parameters of binder/pigment ratio, ethanol content, pigment particle size, coating thickness and cure conditions. A typical optimized coating was prepared by acetic acid catalyzed hydrolysis of methyltriethoxysilane with 3.25 mol-equivalents of water over a 24 hour period at room temperature. The resulting hydrolysate was directly mixed with pre-milled TiO2 (12 grams pigment/26 grams binder) to yield a sprayable consistency. Panels were sprayed to result in a nominal cure coating thickness of 2 mils. Cure was affected by air drying for 24 hr at room temperature plus 72 hr at 150 F. These coatings are typically extremely tough and abrasion-resistant, with an absorptance (alpha) of 0.20 and emittance (e) of 0.89. No significant coating damage was observed in the mandrel bend test, even after exposure to thermal cycling from -160 to 160 F. Vacuum exposure of the coatings for 930 hours at 1 equivalent UV sun resulted in no visible degradation and no significant increase in absorptance.

Patterson, W. J.↗
NASA NTRS1985

Distribution and abundance of organic thiols

The role of glutathione (GSH) in protecting against the toxicity of oxygen and oxygen by products is well established for all eukaryotes studied except Entamoeba histolytica which lacks mitochrondria, chloroplasts, and microtubules. The GSH is not universal among prokaryotes. Entamoeba histolytica does not produce GSH or key enzymes of GSH metabolism. A general method of thiol analysis based upon fluorescent labeling with monobromobimane and HPLC separation of the resulting thiol derivatives was developed to determine the occurrence of GSH and other low molecular weight thiols in bacteria. Glutathione is the major thiol in cyanobacteria and in most bacteria closely related to the purple photosynthetic bacteria, but GSH was not found in archaebacteria, green bacteria, or GRAM positive bacteria. It suggested that glutathione metabolism was incorporated into eukaryotes at the time that mitochondria and chloroplasts were acquired by endosymbiosis. In Gram positive aerobes, coenzyme A occurs at millimolar levels and CoA disulfide reductases are identified. The CoA, rather than glutathione, may function in the oxygen detoxification processes of these organisms.

Fahey, R.↗
NASA NTRS1984

Shuttle derived atmospheric density model. Part 1: Comparisons of the various ambient atmospheric source data with derived parameters from the first twelve STS entry flights, a data package for AOTV atmospheric development

The ambient atmospheric parameter comparisons versus derived values from the first twelve Space Shuttle Orbiter entry flights are presented. Available flights, flight data products, and data sources utilized are reviewed. Comparisons are presented based on remote meteorological measurements as well as two comprehensive models which incorporate latitudinal and seasonal effects. These are the Air Force 1978 Reference Atmosphere and the Marshall Space Flight Center Global Reference Model (GRAM). Atmospheric structure sensible in the Shuttle flight data is shown and discussed. A model for consideration in Aero-assisted Orbital Transfer Vehicle (AOTV) trajectory analysis, proposed to modify the GRAM data to emulate Shuttle experiments.

Findlay, J. T.↗
NASA NTRS1987

Users of middle atmosphere models remarks

The procedure followed for shuttle operations is to calculate descent trajectories for each potential shuttle landing site using the Global Reference Atmosphere Model (GRAM) to interactively compute density along the flight path 100 times to bound the statistics. The purpose is to analyze the flight dynamics, along with calculations of heat loads during reentry. The analysis program makes use of the modified version of the Jacchia-70 atmosphere, which includes He bulges over the poles and seasonal latitude variations at lower altitudes. For the troposphere, the 4-D Model is used up to 20 km, Groves from 30 km up to 90 km. It is extrapolated over the globe and faired into the Jacchia atmosphere between 90 and 115 km. Since data on the Southern Hemisphere was lacking, what was done was that the data was flipped over and lagged 6 months. Sometimes when winds are calculated from pressure data in the model there appear to be discontinuities. Modelers indicated that the GRAM was not designed to produce winds, but good wind data is needed for the landing phase of shuttle operations. Use of atmospheric models during reentry is one application where it is obvious that a single integrated atmosphere model is required.

Gamble, Joe↗
NASA NTRS1988

Four-Dimensional Global Reference-Atmosphere Model

Four-Dimensional Global Reference Atmosphere Model (GRAM) computer program developed from empirical atmospheric model generating values for pressure, density, temperature, and winds, from ground to orbital altitudes. Is amalgamation of two empirical atmospheric models for low and high atmosphere with newly-developed latitude-and longitude-dependent model for middle atmosphere. UNIVAC version written in UNIVAC FORTRAN. DEC VAX version of GRAM written in FORTRAN 77. Applications include simulation of reentry trajectories of external tanks, studies of global circulation and diffusion and generation of plots or data for comparison.

Johnson, Dale↗
NASA NTRS1988

Possible world-wide middle miocene iridium anomaly and its relationship to periodicity of impacts and extinctions

In a study of one million years of Middle Miocene sediment deposition in ODP Hole 689B in the Weddell Sea near Antarctica, a single iridium (Ir) anomaly of 44 (+ or - 10) x 10 to the 12th gram Ir per gram rock (ppt) was observed in core 6H, section 3, 50 to 60 cm, after background contributions associated with manganese precipitates and clay are subtracted. The ODP Hole 689B is 10,000 km away from another site, DSDP Hole 588B in the Tasman Sea north of New Zealand, where a single Ir anomaly of 144 + or - 7 ppt over a background of 11 ppt was found in an earlier study of 3 million years of deposition. From chemical measurements the latter deposition was thought to be impact-related. Ir measurements were made, following neutron activation, with the Iridium Coincidence Spectrometer. The age vs depth calibration curves given in the DSDP and ODP preliminary reports indicate the ages of the Iranomalies are identical, 11.7 million years, but the absolute and relative uncertainties in the curves are not known. Based on the newest age data the age estimate is 10 million years. As the Ir was deposited at the two sites at about the same time and they are one quarter of the way around the world from each other it seems likely that the deposition was world-wide. The impact of a large asteroid or comet could produce the wide distribution, and this data is supportive of the impact relationship deduced for Deep Sea Drilling Project (DSDP) 588B from the chemical evidence. If the surface densities of Ir at the two sites are representative of the world-wide average, the diameter of a Cl type asteroid containing the necessary Ir would be 3 + or - 1 km, which is large enough to cause world-wide darkness and hence extinctions although the latter point is disputed.

Asaro, F.↗
NASA NTRS1989

A hypervelocity launcher for simulated large fragment space debris impacts at 10 km/s

The background, design, and testing of two explosive launchers for simulating large fragment space debris impacts are presented. The objective was to develop a launcher capable of launching one gram aluminum fragments at velocities of 10 km/s. The two launchers developed are based on modified versions of an explosive shaped charge, common in many military weapons. One launcher design has yielded a stable fragment launch of approximately one gram of aluminum at 8.93 km/s velocity. The other design yielded velocities in excess of 10 km/s, but failed to produce a cohesive fragment launch. This work is ongoing, and future plans are given.

Tullos, R. J.↗
NASA NTRS1990

Meteorite infall as a function of mass - Implications for the accumulation of meteorites on Antarctic ice

Antarctic meteorites are considerably smaller, on average, than those recovered elsewhere in the world, and seem to represent a different portion of the mass distribution of infalling meteorites. When an infall rate appropriate to the size of Antarctic meteorites is used (1000 meteorites 10 grams or larger/sq km/1 million years), it is found that direct infall can produce the meteorite accumulations found on eight ice fields in the Allan Hills region in times ranging from a few thousand to nearly 200,000 years, with all but the Allan Hills Main and Near Western ice fields requiring less than 30,000 years. Meteorites incorporated into the ice over time are concentrated on the surface when the ice flows into a local area of rapid ablation. The calculated accumulation times, which can be considered the average age of the exposed ice, agree well with terrestrial ages for the meteorites and measured ages of exposed ice. Since vertical concentration of meteorites through removal of ice by ablation is sufficient to explain the observed meteorite accumulations, there is no need to invoke mechanisms to bring meteorites from large areas to the relatively small blue-ice patches where they are found. Once a meteorite is on a bare ice surface, freeze-thaw cycling and wind break down the meteorite and remove it from the ice. The weathering lifetime of a 100-gram meteorite on Antarctic ice is on the order of 10,000 + or - 5,000 years.

Huss, Gary R.↗
NASA NTRS1991

The meteoritic contribution to the regoliths of Mars, Deimos, and Phobos

The mass influx of meteoritic material at Earth exhibits two distinct peaks: one centered at 10-5 grams, corresponding to the continuous, planet-wide flux of micrometeorites, and a second corresponding to the rare impacts of objects larger than 1014 grams. Using the measured flux of meteoritic material at Earth and estimates of the Mars/Earth flux ration, it was calculated that the micrometeorites add between 2,700 and 59,000 tons of meteoritic material to the surface of Mars annually. This corresponds to the accretion of between 1.8 and 40 cm of meteoritic material per billion years. On the Moon this meteoritic component constitutes 1 to 2 percent of the mare soils. Depending on the indigenous regolith production rate on Mars, the meteoritic material on Mars may be present in sufficient concentration to serve as a resource for the volatile and siderophile elements common in chondritic meteorites but rare in basaltic crustal material. Since a significant fraction of the micrometeorites less than 1200 mm in diameter survive atmospheric entry on Mars without melting, they carry into the regolith the solar wind ions, including H, He, and noble gases, implanted during their space exposure.

Flynn, G. J.↗
NASA NTRS1991

Compositional variations among whole-rock fragments of the L6 chondrite Bruderheim

Twenty about 100-mg random fragments of the Bruderheim chondrite were analyzed by INAA to determine extents of heterogeneity and to check earlier results that gave anomalous LREE concentrations. Considerable compositional heterogeneity was observed in both concentrations (maximum/minimum of 1.7 for Ir, 1.8 for Na, 6.8 for La, 7.4 for Co) and concentration ratios (greater than 3 x for Ni/Co and La/Eu). Compositions could be modeled quantitatively in terms of end-member components of constant composition representing the minerals olivine + orthopyroxene, clinopyroxene, plagioclase, kamacite, taenite, troilite, chromite, and phosphate. The model yields the proportions of minerals in each sample as well as the meteorite as a whole; accurate determination of the end members depends on high intrasample precision for many elements. No evidence of compositional heterogeneity of end members for trace elements was found. It is shown that these analyses, which used only about 2 grams of the meteorite, are equivalent in accuracy to a single sample of several tens of grams, and that knowledge of the extent of heterogeneity is essential to knowing the quality of sampling as well as for comparing results from one analysis with another and of one meteorite with another.

Haas, Johnson R.↗
NASA NTRS1991

The NASA environmental models of Mars

NASA environmental models are discussed with particular attention given to the Mars Global Reference Atmospheric Model (Mars-GRAM) and the Mars Terrain simulator. The Mars-GRAM model takes into account seasonal, diurnal, and surface topography and dust storm effects upon the atmosphere. It is also capable of simulating appropriate random density perturbations along any trajectory path through the atmosphere. The Mars Terrain Simulator is a software program that builds pseudo-Martian terrains by layering the effects of geological processes upon one another. Output pictures of the constructed surfaces can be viewed from any vantage point under any illumination conditions. Attention is also given to the document 'Environment of Mars, 1988' in which scientific models of the Martian atmosphere and Martian surface are presented.

Kaplan, D. I.↗