SEARCH · Search NASA

Results for “Geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS2017

Using Neural Networks to Improve the Performance of Radiative Transfer Modeling Used for Geometry Dependent Surface Lambertian-Equivalent Reflectivity Calculations

Surface Lambertian-equivalent reflectivity (LER) is important for trace gas retrievals in the direct calculation of cloud fractions and indirect calculation of the air mass factor. Current trace gas retrievals use climatological surface LER's. Surface properties that impact the bidirectional reflectance distribution function (BRDF) as well as varying satellite viewing geometry can be important for retrieval of trace gases. Geometry Dependent LER (GLER) captures these effects with its calculation of sun normalized radiances (I/F) and can be used in current LER algorithms (Vasilkov et al. 2016). Pixel by pixel radiative transfer calculations are computationally expensive for large datasets. Modern satellite missions such as the Tropospheric Monitoring Instrument (TROPOMI) produce very large datasets as they take measurements at much higher spatial and spectral resolutions. Look up table (LUT) interpolation improves the speed of radiative transfer calculations but complexity increases for non-linear functions. Neural networks perform fast calculations and can accurately predict both non-linear and linear functions with little effort.

Geometry Dependent LER (GLER) capture↗

DOE OSTI2024

Recent and future developments in pultrusion technology with consideration for curved geometries: A review

Herein this paper examined the current state and future developments in pultrusion with particular emphasis on its application in curved part manufacturing. The relationship between factors such as resin chemistry, fiber characteristics, and die geometry that influences the properties of pultruded product were highlighted. Moreover, the specific challenges associated with pultruding curved parts such as the complexities in achieving uniformity and structural integrity in such geometries were discussed. The review emphasized mold design, process improvement, adaptive control systems for precise resin impregnation and material selection to address these challenges. Additionally, the paper suggests the integration of real-time monitoring and data analytics as ways to enhance quality control during curved parts pultrusion. These advancements will help to overcome challenges specific to curved pultrusion and make the process more efficient. Other manufacturing techniques such as filament winding, thermoforming, pulforming were mentioned as alternatives to curved parts pultrusion. The review also explores pultruded variable curvature processes, highlighting some notable patents and article related to this subject matter. Production of pultruded variable curvature parts was seen as a key driver that can shape the future of pultrusion. Finally, the paper anticipates future trends, with sustainability, customization, integration of advanced materials, and development of techniques for pultrusion of composites parts.

42 ENGINEERING↗

DOE OSTI2025

Impact of lead on an axisymmetric, single bead blown powder DED overhung geometry

Metal additive manufacturing can be utilized for the near net-shape manufacture of components in a layer wise technique. Traditionally, the buildup process is conducted in the direction of gravity or bottom to top in the vertical orientation; however, with the availability of commercial systems with additive heads or fixturing that can index from vertical, and the need to manufacture larger parts without modifying available systems, the limitation of manufacturing from bottom to top is removed enabling the buildup of larger components printed at an angle from vertical. The effect of gravity on the melt pool and as-deposited component quality when printing off vertical is unknown in literature, especially for axisymmetric components. This understanding is critical for the advancement of manufacturing components of increased size in 4 and 5-axis additive systems. This investigation utilizes blown powder directed energy deposition to evaluate the change in as-printed geometry when the start point is altered in relation to gravity while the part rotates to manufacture an axisymmetric component. The objectives of this work are to determine the impact of the deposition location on the geometric variability on axisymmetric components. This investigation tests the hypothesis that differences in layer height exist due to a change in catchment efficiency when the deposition location is moved to a tangent of the round geometry due to a change in the melt pool dynamics. It was found the ideal deposition location when printing at 26.6-degrees from vertical was at −90-degrees from the top center point of the component, along the tangent, where gravity was pushing the melt pool down, but the rotation of the part was pulling the deposited material towards the top center of the component. This work provides an understanding of layer height stability and catchment efficiency to guide print orientation strategy for high-aspect ratio components. It was found the −90-degree lead deposition had the best layer height stability at 0.6 % as compared to the top-center at 6.3 % and +90-degree deposition location at 9.2 % for the nominal programmed layer height. The change in layer height also effected the final diameter the greatest for the top center deposition location where the diameter diverged by 2.5 % during the overbuild condition and converged by 0.6 %. In conclusion, this finding will increase the manufacturing efficiency of axisymmetric components by increasing the passive stability of the printing process for the successful manufacture of parts without the need for perfectly calibrated manufacturing parameters.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Fracture toughness measurement of ceramics with fuel pellet geometry

The crack initiation of nuclear fuel pellets, driven by extreme temperature gradients, is a critical factor impacting reactor performance. Although this fact is widely acknowledged, there is limited fracture toughness data for specimens with representative geometry and fabricated using relevant processing methods. Here, to address this, a new chevron-notched short-rod specimen configuration with diameter and length both equal to 10 mm, representative of a conventional fuel pellet and tested in tension, was developed in an attempt to validly measure Mode I fracture toughness, K Ic . Test calibration was carried out by testing polycrystalline ZrO 2 , SiC, and Si 3 N 4 ceramics fabricated with conventional fuel pellet geometry and known fracture toughnesses. The results suggest that the method described in this paper produces valid K Ic measurements using conventional ceramic fuel pellets.

Ceramics↗

DOE OSTI2025

Multi-Dimensional Spectroscopy with Intense Entangled Beams: Entanglement-Enabled Phase Matching in a Collinear Beam Geometry

The experimental realization of quantum molecular spectroscopy with entangled photons remains challenging owing to the low signal-to-noise ratio resulting from the use of low-flux entangled photons. High-flux entangled photons via intense entangled beams can be used to improve the signal-to-noise ratio, but the presence of unentangled photons contaminates the quantum signal stemming from entangled photons. Here, we demonstrate how intense entangled beams can be used in multi-dimensional spectroscopy while retaining the advantage of photon entanglement. Our approach is broadly applicable to odd-ordered nonlinear spectroscopies, and it generates purely quantum spectroscopic signals. The proposed approach allows the recording of desired phase-matched signals even in a collinear beam geometry, which lifts the requirement of complicated beam geometry setups for phase matching in multi-dimensional spectroscopies.

Absorption spectroscopy↗

DOE OSTI2025

Customizable Aperture Geometry in Metal–Organic Frameworks for Kinetic Hydrocarbon Separation

Precise control of aperture dimensions is crucial in adsorptive separations of hydrocarbons, as it directly affects key parameters such as selectivity, capacity, diffusion, and recyclability. The development of metal–organic frameworks (MOFs) has enabled the fine-tuning of local pore environments to address important hydrocarbon separations. However, customizing the aperture geometry to tune the kinetic separation performance remains challenging. Here, we deploy a mixed-linker synthesis strategy, combining long and short linkers on fcu net Zr-MOFs with equilateral triangular apertures to construct isoreticular multivariate MOFs, NU-415 and NU-416, with tailored isosceles triangular apertures suitable for the separation of hexane isomers. Sorption, liquid batch separation, and X-ray diffraction measurements demonstrate significantly improved selectivity, capacity, stability, and recyclability of NU-415 and NU-416 compared with Zr-muconate and MOF-801. Notably, both NU-415 and NU-416 achieve uptake capacities of 2.2 mmol g –1 in 1 min with an n-hexane to 2,2-dimethylbutane selectivity over 200 in an equimolar ternary mixture at ambient conditions, comparable to leading reported materials. Mechanistic studies confirm that separation performance is predominantly governed by significant kinetic differences rather than by thermodynamics. Furthermore, the successful customization of aperture geometry not only enables superior linear to monobranched hexane selectivity in NU-415 but also demonstrates the mixed-linker synthesis strategy as a promising solution for precise and predictable pore architecture control in MOFs.

Adsorption↗

DOE OSTI2025

Fault Network Geometry Modulates Earthquake Source Spectra Across Scales

Earthquake source spectra provide unique insights into the earthquake rupture process. Motivated by previous research suggesting that complex fault geometries enhance high‐frequency seismic radiation, we study the influence of fault network geometry on earthquake source spectra using multiple independent observations. At regional scales, we examine correlations of stress drop measurements with surface fault trace misalignment in Southern California, Japan, and Central Italy. At a global scale, we examine correlations of moment‐rate function complexity of large earthquakes with focal mechanism variability, a proxy for local fault complexity. Despite significant scatter in the observations, we find overall consistent positive correlations. The concept that elastic interactions of discrete fault structures during the earthquake rupture process generates high‐frequency ground motions offers a coherent framework for interpreting our observations. These findings suggest that variations in fault complexity explain why some earthquakes produce stronger high‐frequency ground motions than others.

Lee, Jaeseok [Brown Univ., Providence, RI (United ↗

DOE OSTI2024

Computational multiphysics modeling of radioactive aerosol deposition in diverse human respiratory tract geometries

The evaluation of aerosol exposure relies on generic mathematical models that assume uniform particle deposition profiles over the human respiratory tract and do not account for subject-specific characteristics. Here we introduce a hybrid-automated computational workflow that generates personalized particle deposition profiles in 3D reconstructed human airways from computed tomography scans using Computational Fluid and Particle Dynamics simulations. This is the first large-scale study to consider realistic airways variability, where 380 lower and 40 upper human respiratory tract 3D geometries are reconstructed and parameterized. The data is clustered into nine groups using random forest regression. Computational fluid and particle dynamics simulations are conducted on these representative geometries using a realistic heavy-breathing respiratory cycle and radioactive iodine-131 as a source term. Monte Carlo radiation transport simulations are performed to obtain detailed energy deposition maps. Our findings emphasize the importance of personalized studies, as minor respiratory tract variations notably influence deposition patterns rather than global parameters of the lower airways, observing more than 30% variance in the mass deposition fraction.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

DOE OSTI2026

Onset of High-Harmonic Fast Wave Propagation in Annulus Geometry

Previous experiments on NSTX have reported high-harmonic fast wave (HHFW) power losses in the scrape-off layer (SOL), with dependencies on the wave parallel wavenumber, plasma density, and magnetic field. This study presents an analysis of HHFW propagation in the SOL plasma, focusing on parasitic coupling to the waveguide mode bounded by the steep gradient pedestal and the outer wall boundary. The analytic and finite element wave models are discussed using a 2D annulus geometry, which serves as a simplified representation of the NSTX-U plasma. The model shows that a minimum radial gap width is required to support wave propagation, analogous to the higher-order modes in coaxial geometries. The impact of several factors, including gap width, wave parallel phasing, and magnetic field strength, on parasitic wave coupling is examined, highlighting the role of the geometric dimension in relation to the wave perpendicular wavelength. The findings suggest that controlling the edge/SOL density profile (gap control) is crucial for mitigating parasitic coupling when the density in front of the antenna exceeds the density cutoff.

Baek, Seung-Gyou [Massachusetts Inst. of Technolog↗

DOE OSTI2025

Design of a robot-automated flat plate/reflection geometry x-ray diffraction setup for accelerated materials discovery and structural screening

Here, we report the design, construction, and automation of a flat plate sample loading, alignment, and data acquisition system for X-ray diffraction measurements in reflection geometry implemented at the Stanford Synchrotron Radiation Lightsource. The system is built onto a single platform, enabling facile transferability, and is compartmentalized into sample storage, sample transfer, and sample position/alignment segments. The core feature of this system is a six-axis robotic arm that offers a large range of highly reproducible and programable movements. The degrees of freedom of the robot arm enable adaptability in which movements can be modified to fit various beamline environments and sample configurations. Samples are housed on 3D printed sample mounts, which are arranged onto a 6 × 2 array of sample cassettes capable of holding 7 samples. Using sample mounts designed for solid oxide electrolysis button cells (SOECs), the maximum tray capacity is 84 samples, which can be aligned and run in ~ 24 hours with long exposure scans. The sample array is additionally capable of accommodating a range of sample sizes and geometries due to the rapid 3D printed fabrication. The components of the setup will be described in detail and performance will be demonstrated with a set of representative SOEC and XRD standard samples. Opportunities for future developments and integration with the automated setup are summarized.

08 HYDROGEN↗

DOE OSTI2024

Radiofrequency sheath rectification on WEST: application of the sheath-equivalent dielectric layer technique in tokamak geometry *

Radiofrequency sheath rectification is a phenomenon relevant to the operation of Ion Cyclotron Range of Frequencies (ICRFs) actuators in tokamaks. Techniques to model the sheath rectification on 3D ICRF antenna geometries have only recently become available (Shiraiw et al 2023 Nucl. Fusion 63 026024; Beers et al 2021 Phys. Plasmas 28 093503). In this work, we apply the 'sheath-equivalent dielectric layer' technique, used previously only on linear devices (Beers et al 2021 Phys. Plasmas 28 103508), in tokamak geometry, computing rectified sheath potentials on the WEST ICRF antenna. Advancing the state of the art in sheath rectification modeling, we compute the sheath potentials not just on the limiters, but also on the Faraday Screen bars. The calculations show a peak rectified DC potential of 300 V on the limiters and 500 V on the Faraday screen. Assuming a typical sputtering yield curve, the RF sheath rectification increases the sputtering yield from the limiters by a factor of 2.6 w.r.t. the sputtering due to the non-rectified thermal sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Particle-in-cell simulation of laser wakefield accelerators with oblique lasers in quasicylindrical geometry

In the studies of optical injections in laser or beam-driven wakefield accelerators, there is a frequent demand for using obliquely propagating assistant lasers in particle-in-cell simulations. In conventional methods, this is only possible in either two- or three-dimensional Cartesian geometries, which have the drawbacks of either lack of fidelity for the actual situation or requiring a huge amount of computational resources. In this work, we develop a new method that uses an expression-defined oblique laser field to simulate such situations in quasicylindrical geometry particle-in-cell simulations, having the advantages of both maintaining good fidelity and saving computational resources. As an example, we use this method in the scissor-cross ionization injection scheme for the optimization of the injected beam quality. This method is widely applicable to particle injections with assistant lasers in wakefield accelerators, as long as the assistant lasers only influence the injected particles during the injection process. Published by the American Physical Society 2025

Ma, Minghao (ORCID:0009000602317775)↗

DOE OSTI2024

Field-Emission Properties of Vertically Aligned Carbon Nanotube Cathodes of Varying Geometries

This work characterizes the bulk emission properties of carbon nanotube (CNT) forest cathodes fabricated with various geometries. Geometries explored include dense nanotube forests of varying height grown on 5×5 mm silicon (Si) substrates and discrete, patterned CNT pillars fabricated using UV photolithography. Dense forests heights ranged from 526 μ m to 1.41 mm, with packing fraction for dense forest calculated to be 4e10 nanotubes/cm2 based on an average nanotube separation distance of 100 nm for fixed growth dense forests. Patterned sample micro pillar heights ranged from 47 to 393 μ m with pillar widths on tested samples ranging from 250 to 270 μ m . Properties explored include emission current, turn-on field, and emission current performance over time. A parallel plate electron beam diode with a 100- μ m A-K gap and an automated test apparatus were developed to provide a configurable experiment that provides accurate and repeatable measurements for dc, dc sweep, and timed performance testing. Operating voltages for the voltage sweeps spanned from 0 to −350 V. Furthermore, testing has shown evidence of a hysteresis effect on the emission current tied to the applied field history as well as shifting of the turn-on field magnitude throughout the testing period, suggesting a conditioning effect during use. Three separate emission regions in the I–V curves during sweep testing have also been observed. In the geometric study, dense forests and patterned samples were sweep tested up to a peak applied voltage of −250 V, with the taller samples generally performing better. Currents produced in the geometric study from the dense forest emitters ranged from 36.8 to 572.34 μ A , with current densities ranging from 15 to 2.29 mA/cm2. Currents produced from the patterned micropillar emitters ranged from 39.4 to 317.51 μ A , with current densities ranging from 67 to 3 mA/cm2. DC time testing s...

36 MATERIALS SCIENCE↗

DOE OSTI2025

O4855---Geometry_Optimizer_with_NSGA-II

It is a geometry optimizer, written for MCNP geometries but also applicable to other simulation programs. It uses NSGA-II optimization algorithm to change the specified input parameters to iteratively improve the requested tally values over generations.

Erdem, Omer↗

DOE OSTI2026

Dataset for Role of electron correlation on the adenine dimer interaction for non-equilibrium geometries: a benchmark Quantum Monte Carlo study

Datasets for the calculations reported in "Role of electron correlation on the adenine dimer interaction for non-equilibrium geometries: A benchmark Quantum Monte Carlo study" by L. Washburn, A. Sedova, P. R. C. Kent. J. Chem. Phys. (2026) 165 (5): 054118. https://doi.org/10.1063/5.0332651. Includes the molecular geometries, QMCPACK, PySCF, and ORCA inputs and outputs, analysis scripts and files needed to reproduce all the figures and tables.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Impact of Source Geometry on Detector Response Matrix Efficiency: Simulations of the PFUNS-MUSiC Experiments

This work looks at two different bare highly enriched uranium (HEU) systems, configuration one from Measurements of Uranium Subcritical and Critical (MUSiC) and Prompt Fission Uranium Neutron Spectrum (PFUNS) to see the effect geometry has on detector efficiency and the response matrix. The distance from the multiplying source, the medium between the source and detector, and the geometry of the source all play a part in the efficiency of the detector. These factors are especially important when performing spectrum unfolding. Spectrum unfolding is a process used to reconstruct a true spectrum from measured detector response data. It involves interpreting a set of measured values, such as a light signal from a scintillator, to recover the original neutron energy spectrum. This leads to the question, how much will the efficiency of a detector change when you measure a point source compared to an extended source? The distance and solid angle from the source to the detector may be different. It may only be a minuscule change, but in the spectrum unfolding process it can have a considerable effect on the unfolded spectrum

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Benchmark Study Matrix for Microreactor Geometries Relevant to Multiple Developers

A benchmark study was developed that include design, development, manufacturing, and performance measurement of agnostic reactor relevant geometries to support industry’s adoption of advanced manufacturing in a variety of structures. A matrix of five microreactor component geometries, specifically based on the recent feasibility study on a Marvel microreactor liner, was developed and the Pacific Northwest National Laboratory team initiated one material/process combination, namely 316H using laser powder directed energy deposition (DED). Although the benchmark starts initially with simplistic cubical and cylindrical forms, it builds up to a mock-up of a non-proprietary design that can demonstrate a variety of features potentially useful for presenting knowledge to specific designers of microreactors and for the matter also for other reactor type designers. The initial cubical and cylindrical forms are initial steps to obtain surface features and dimensional responses to the identified process parameters to be used in the non-proprietary design mockup.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Performance of synthetic DAS as a function of array geometry

Distributed Acoustic Sensing (DAS) can record acoustic wavefields at high sampling rates and with dense spatial resolution difficult to achieve with seismometers. Using optical scattering induced by cable deformation, DAS can record strain fields with spatial resolution of a few meters. However, many experiments utilizing DAS have relied on unused, dark telecommunication fibers. As a result, the geophysical community has not fully explored DAS survey parameters to characterize the ideal array design. This limits our understanding of guiding principles in array design to deploy DAS effectively and efficiently in the field. A better quantitative understanding of DAS array behavior can improve the quality of the data recorded by guiding the DAS array design. Here we use steered response functions, which account for DAS fiber’s directional sensitivity, as well as beamforming and back-projection results from forward modelling calculations to assess the performance of varying DAS array geometries to record regional and local sources. A regular heptagon DAS array demonstrated improved capabilities for recording regional sources over other polygonal arrays, with potential improvements in recording and locating local sources. These results help reveal DAS array performance as a function of geometry and can guide future DAS deployments.

58 GEOSCIENCES↗