Design and optimization of THz coupling in zirconia MAS rotors for dynamic nuclear polarization NMR
Not Available
Biochemistry & Molecular Biology↗
SEARCH · Search NASA
Results for “Griffin”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Techno-economic analysis and life cycle assessment for the catalytic hydrogenolysis and hydrocracking of polyethylene
Catalytic hydrogenolysis and hydrocracking are promising technologies for the conversion of polyolefin waste into hydrocarbons. Here, to explore the economic and environmental viability of these approaches, we conducted techno-economic analysis and life cycle assessment of polyethylene hydrogenolysis and hydrocracking processes that produce fuel-range products or olefins, respectively. Relative to primary production, the minimum selling price (MSP) of alkanes for linear-chain naphtha was estimated to be 1.8-fold higher, whereas branched-chain naphtha and propylene were shown to be cost competitive. Environmental impacts showed similar trends across scenarios, with propylene production by hydrocracking exhibiting greenhouse gas emissions comparable with conventional propylene due to relatively low hydrogen demand and high yield. Together, these results suggest that innovations in catalysis and reaction engineering will be required to make viable products that are scale matched with today's plastics, such as light olefins for closed-loop recycling.
09 BIOMASS FUELS↗
High spatial resolution neutron imaging of lithium-ion batteries: Correlating microstructure and lithium transport
Thick electrodes for lithium-ion batteries can increase the overall energy density, but increasing the electrode thickness introduces charge transport limitations. These limitations may be mitigated through proper electrode structuring. Here, high spatial resolution neutron imaging was used to understand the correlation between microstructure and lithium transport in lithium-ion anodes. Batteries with distinct graphite anode microstructures were produced and studied with high spatial resolution in operando neutron radiography to observe the effects of structure on transport. High spatial resolution neutron computed tomography was performed following in operando neutron radiography. X-ray computed tomography and scanning electron microscopy were used to observe the finer scale anode structure to complement neutron imaging. Solvent-free anodes containing a tightly-packed layered structure confined lithium movement close to the separator. This structure limited capacity, but supported better rate capability. Conversely, a more open pore structure in the wet cast anodes yielded higher capacity with reduced rate capability. Together, these results show that lithium distributions can be controlled by the macroscopic structure of the electrodes, the microstructural pore network, and the microscale active areas that support electrochemical reactions. Furthermore, multimodal imaging applying the complementary strengths of neutron and X-ray methods is shown as a tool for advancing battery design.
25 ENERGY STORAGE↗
Surgeon acceptance of an initial 3D glenoid preoperative plan: rates and risk factors
Not Available
Hartzler, Robert U.↗
Dynamic and Programmable Cellular-Scale Granules Enable Tissue-like Materials
Living tissues are an integrated, multiscale architecture consisting of dense cellular ensembles and extracellular matrices (ECMs). The cells and ECMs cooperate to enable specialized mechanical properties and dynamic responsiveness. However, the mechanical properties of living tissues are difficult to replicate. A particular challenge is identification of a cell-like synthetic component, which is tightly integrated with its matrix and also responsive to external stimuli. Here, we demonstrate that cellular-scale hydrated starch granules, an underexplored component in materials science, can turn conventional hydrogels into tissue-like materials when composites are formed. By using several synchrotron-based X-ray techniques, we reveal the mechanically induced organization and training dynamics of the starch granules in the hydrogel matrix. These dynamic behaviors enable multiple tissue-like properties such as programmability, anisotropy, strain-stiffening, mechanochemistry, and self-healability.
36 MATERIALS SCIENCE↗
Manipulating the 3D organization of the largest synthetic yeast chromosome
Whether synthetic genomes can power life has attracted broad interest in the synthetic biology field. Here, we report de novo synthesis of the largest eukaryotic chromosome thus far, synIV, a 1,454,621-bp yeast chromosome resulting from extensive genome streamlining and modification. We developed megachunk assembly combined with a hierarchical integration strategy, which significantly increased the accuracy and flexibility of synthetic chromosome construction. Besides the drastic sequence changes, we further manipulated the 3D structure of synIV to explore spatial gene regulation. Surprisingly, we found few gene expression changes, suggesting that positioning inside the yeast nucleoplasm plays a minor role in gene regulation. Lastly, we tethered synIV to the inner nuclear membrane via its hundreds of loxPsym sites and observed transcriptional repression of the entire chromosome, demonstrating chromosome-wide transcription manipulation without changing the DNA sequences. Our manipulation of the spatial structure of synIV sheds light on higher-order architectural design of the synthetic genomes.
59 BASIC BIOLOGICAL SCIENCES↗
Performance Evaluation of an Offshore Wave Measurement Buoy in Monochromatic Waves
The accurate measurement of waves underpins marine energy resource characterization, device design, and project development. Datawell wave buoys are widely deployed and have long served as a trusted standard for wave measurements. We quantify the measurement performance, including wave elevation and energy flux estimation, of a Datawell DWR-MkIII buoy using prescribed monochromatic heave motions on a large-amplitude six-degree-of-freedom motion platform at the National Laboratory of the Rockies, assuming the buoy behaves as an ideal wave follower. Commanded motions were validated with an optical motion tracking system while buoy elevation and raw acceleration were recorded. Wave elevations were propagated to wave energy flux estimation using four methods, including one frequency-domain method and three time-domain methods. The Bayesian optimization was applied for design of experiments, and records from three test sites were also applied and evaluated in the present study. Results show two error regions within the nominal period range of 1.6 s to 30 s. For wave periods between 5 s and 25 s, the buoy provides accurate wave height measurements. For short periods less than 5 s, the 1.28 Hz sampling frequency induces sub-Nyquist artifacts that bias elevation and can drive maximum energy flux estimation errors above 100%. For long periods exceeding 25 s, the buoy reported elevation is underpredicted with error depending on period but relatively independent of wave height, with maximum wave height and wave energy flux errors reaching 64% and 87%, respectively. Furthermore, analysis of three field-derived cases shows that frequency-domain estimates at 1.28 Hz agree within 2% of the corresponding 100 Hz estimates, while larger method-dependent differences are observed for the Hilbert method.
16 TIDAL AND WAVE POWER↗
β-delayed neutron emission of r-process nuclei at the N = 82 shell closure
Not Available
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Automated power-following control for nuclear thermal propulsion startup and shutdown using MOOSE-based applications
This paper describes an investigation of various automated control strategies applied to a full-core multiphysics Griffin/Bison/RELAP-7 model of a prototypical nuclear thermal propulsion system. In all cases, control is achieved by actuating control drums based on the demanded power and predicted quantities from the numerical model. One key finding is that hybrid proportional integral derivative controllers – a novel type of controller that uses both power and reactivity predicted signals – can demonstrate a level of performance rivaling that of period-generated control. The former requires parameter tuning, while the latter mostly necessitates providing reactivity coefficients and temperature rates of change, which could be very challenging to accurately measure in real-time. In addition, decay heat plays an important role in determining cooling requirements during cooldown phases. A decay heat model, accounting for burn time and throttling, was derived, and is incorporated within the model to simulate the steady-state and shutdown phases and satisfyingly follow the power demand. However, temperature overshoots and non-constant specific impulse during throttling will necessitate further improvements.
33 ADVANCED PROPULSION SYSTEMS↗
The effect of remnant CdSe layers on the performance of CdSeTe/CdTe photovoltaic devices
Thin film CdTe-based photovoltaic devices have achieved high efficiency above 22 %. The recent improvement in efficiency is due to Se alloying in the CdTe absorbers to form a CdSeTe/CdTe structure. The subsequent band gap grading increases the short circuit current density. The Se can be introduced by depositing a precursor thin film of either CdSe or a CdSeTe alloy and then diffusing the Se into the CdTe during the high temperature cadmium chloride activation process. Using CdSe is preferred because it is easier to control the Se concentration. However, during fabrication of the CdSeTe/CdTe devices, the CdSe thickness needs to be precisely controlled to prevent the retention of a CdSe remnant layer after the activation treatment. Retention of a remnant CdSe layer causes a dramatic reduction in device efficiency. In this work, we show that the reduction in efficiency is caused by a number of factors. The remnant CdSe layer is n-type which moves the position of the p-n junction. Also, it is widely thought that the CdSe remnants are photo-inactive. In this work, we clarify that the individual CdSe grains are actually highly photo-active. However, the grain sizes in the CdSe remnant and the adjacent CdSeTe layer are very small resulting in a high grain boundary area. Although the grain boundaries are passivated with chlorine, cathodoluminescence imaging and electrical measurements show that this is only partially effective. Also, EQE measurements show that the remnant CdSe causes parasitic absorption. Overall, the remnant CdSe layer causes a reduction in short circuit current density and device efficiency. The thickness of the CdSe precursor layer and the cadmium chloride activation process conditions must be precisely optimised to ensure that all the CdSe is consumed and inter-diffused to form the CdSeTe alloy for highest efficiency devices.
CdSe remnant↗
40-meter-long REBCO tapes with critical current over 4,000 A/12 mm at 4.2 K and 13 T by advanced MOCVD
REBa 2 Cu 3 O 7–δ (REBCO, RE = rare earth) tapes doped with 5% and 15% Zr have been scaled up to lengths more than 40 m in a pilot-scale advanced metal organic chemical vapor deposition (A-MOCVD) tool. The precursor compositions used for the long tapes were guided by a study of the influence of (Ba + dopant)/Cu content on the critical current density (J c ) of 5 and 15 mol.% Hf- and Zr-added tapes at 4.2 K and 13 T. The 40-m-long tapes exhibited a critical current (I c ) over 4,000 A/12 mm at 4.2 K and 13 T as well as over 1,400 A/12 mm at 20 K and 20 T. The critical current densities of a 40-m-long tape doped with 5% Zr at 4.2 K measured at the National High Magnetic Field Laboratory (NHMFL) were > 10 MAcm –2 and >5 MAcm –2 at 14 T and 30 T, respectively, which are over three times those of commercial REBCO tapes. The infield J c of 5% Zr-added 40-m-long tapes was similar to those of previously-reported high-performance short samples made with 15% Zr or Hf. These results demonstrate the excellent potential of A-MOCVD for manufacturing high I c REBCO tapes for use in ultrahigh-field magnet applications.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Emergent properties from dynamicity in biomimetic coordination complexes
Not Available
Griffin, Paul J. (ORCID:0000000154823457)↗
Assembly of JAZ–JAZ and JAZ–NINJA complexes in jasmonate signaling
Jasmonates (JAs) are plant hormones with crucial roles in development and stress resilience. They activate MYC transcription factors by mediating the proteolysis of MYC inhibitors called JAZ proteins. In the absence of JA, JAZ proteins bind and inhibit MYC through the assembly of MYC–JAZ–Novel Interactor of JAZ (NINJA)–TPL repressor complexes. However, JAZ and NINJA are predicted to be largely intrinsically unstructured, which has precluded their experimental structure determination. Through a combination of biochemical, mutational, and biophysical analyses and AlphaFold-derived ColabFold modeling, we characterized JAZ–JAZ and JAZ–NINJA interactions and generated models with detailed, high-confidence domain interfaces. We demonstrate that JAZ, NINJA, and MYC interface domains are dynamic in isolation and become stabilized in a stepwise order upon complex assembly. By contrast, most JAZ and NINJA regions outside of the interfaces remain highly dynamic and cannot be modeled in a single conformation. Our data indicate that the small JAZ Zinc finger expressed in Inflorescence Meristem (ZIM) motif mediates JAZ–JAZ and JAZ–NINJA interactions through separate surfaces, and our data further suggest that NINJA modulates JAZ dimerization. This study advances our understanding of JA signaling by providing insights into the dynamics, interactions, and structure of the JAZ–NINJA core of the JA repressor complex.
59 BASIC BIOLOGICAL SCIENCES↗
An extension of Thwaites’ method for turbulent boundary layers
Thwaites developed an approximate method for determining the evolution of laminar boundary layers. The approximation follows from an assumption that the growth of a laminar boundary layer in the presence of pressure gradients could be parameterized solely as a function of the Holstein–Bohlen flow parameter, thus reducing the von Kármán momentum integral to a first-order ordinary differential equation. This method is useful for the analysis of laminar flows, and in computational potential flow solvers to account for the viscous effects. In this work, an approximate method for determining the momentum thickness of a two-dimensional, turbulent boundary layer is proposed following Thwaites’ work. It is shown that the method provides good estimates of the momentum thickness for multiple boundary layers, including both favourable and adverse pressure gradient effects, up to the point of separation. In the limit of high Reynolds numbers, it is possible to derive a criterion for the onset of separation from the proposed model, which is shown to be in agreement with prior empirical observations. The sensitivity of the separation location with respect to upstream perturbations is also analysed through this model for the NASA/Boeing speed bump and the transonic Bachalo–Johnson bump.
17 WIND ENERGY↗
Automated control and optimization of laser-driven ion acceleration
The interaction of relativistically intense lasers with opaque targets represents a highly non-linear, multi-dimensional parameter space. This limits the utility of sequential 1D scanning of experimental parameters for the optimization of secondary radiation, although to-date this has been the accepted methodology due to low data acquisition rates. High repetition-rate (HRR) lasers augmented by machine learning present a valuable opportunity for efficient source optimization. Here, an automated, HRR-compatible system produced high-fidelity parameter scans, revealing the influence of laser intensity on target pre-heating and proton generation. A closed-loop Bayesian optimization of maximum proton energy, through control of the laser wavefront and target position, produced proton beams with equivalent maximum energy to manually optimized laser pulses but using only 60% of the laser energy. This demonstration of automated optimization of laser-driven proton beams is a crucial step towards deeper physical insight and the construction of future radiation sources.
47 OTHER INSTRUMENTATION↗
Versatile tape-drive target for high-repetition-rate laser-driven proton acceleration
We present the development and characterization of a high-stability, multi-material, multi-thickness tape-drive target for laser-driven acceleration at repetition rates of up to 100 Hz. The tape surface position was measured to be stable on the sub-micrometre scale, compatible with the high-numerical aperture focusing geometries required to achieve relativistic intensity interactions with the pulse energy available in current multi-Hz and near-future higher repetition-rate lasers ( > kHz). Long-term drift was characterized at 100 Hz demonstrating suitability for operation over extended periods. The target was continuously operated at up to 5 Hz in a recent experiment for 70,000 shots without intervention by the experimental team, with the exception of tape replacement, producing the largest data-set of relativistically intense laser–solid foil measurements to date. This tape drive provides robust targetry for the generation and study of high-repetition-rate ion beams using next-generation high-power laser systems, also enabling wider applications of laser-driven proton sources.
47 OTHER INSTRUMENTATION↗
A universal velocity transformation for boundary layers with pressure gradients
The logarithmic law of the wall does not capture the mean flow when a boundary layer is subjected to a strong pressure gradient. In such a boundary layer, the mean flow is affected by the spatio-temporal history of the imposed pressure gradient; and accounting for history effects remains a challenge. This work aims to develop a universal mean flow scaling for boundary layers subjected to arbitrary adverse or/and favourable pressure gradients. Here, we derive from the Navier–Stokes equation a velocity transformation that accounts for the history effects and maps the mean flow to the canonical law of the wall. The transformation is tested against channel flows with a suddenly imposed adverse or favourable pressure gradient, boundary layer flows subjected to an adverse pressure gradient, and Couette–Poiseuille flows with a streamwise pressure gradient. It is found that the transformed velocity profiles follow closely the equilibrium law of the wall.
97 MATHEMATICS AND COMPUTING↗
Operando S/TEM Reactions of Pt/TiO 2 Catalysts for Catalytic Fast Pyrolysis
Conversion of lignocellulosic biomass into the transportation fuel is an attractive concept. Using ex situ Catalytic Fast Pyrolysis (CFP) improves to upgrade bio-oils via catalytic deoxygenation of the biomass pyrolysis vapors. Zeolites are often used in this technique as the catalyst; however, in order to reduce minimum fuel selling price and improve carbon yields, ongoing research emphasizes catalyst optimization. By using bifunctional metal-acid catalysts and utilizing hydrogen, it is possible to improve carbon yields by minimizing the carbon-containing light gasses (since oxygen is removed aswater) and by reducing coke formation. Current research and development activities focuses on Pt/TiO 2 catalysts as the most promising catalyst candidates for the hydrodeoxygenation process. Here, our aim is to determine the structure-function relationships of the Pt/TiO 2 catalyst and the role of Pt dispersions within the catalyst on performance, using operando scanning transmission electron microscopy (S/TEM).
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗