Search NASA⌕ Search

SEARCH · Search NASA

Results for “H- source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

A First Comparison of Millimeter Continuum and Mg ii Ultraviolet Line Emission from the Solar Chromosphere

We present joint observations of the Sun by the Atacama Large Millimeter/submillimeter Array (ALMA) and the Interface Region Imaging Spectrograph ( IRIS ). Both millimeter/submillimeter- λ continuum emission and ultraviolet (UV) line emission originate from the solar chromosphere and both have the potential to serve as powerful and complementary diagnostics of physical conditions in this enigmatic region of the solar atmosphere. The observations were made of a solar active region on 2015 December 18 as part of the ALMA science verification effort. A map of the Sun’s continuum emission was obtained by ALMA at a wavelength of 1.25 mm (239 GHz). A contemporaneous map was obtained by IRIS in the Mg ii h doublet line at 2803.5 Å. While a clear correlation between the 1.25 mm brightness temperature T{sub B} and the Mg ii h line radiation temperature T {sub rad} is observed, the slope is <1, perhaps as a result of the fact that these diagnostics are sensitive to different parts of the chromosphere and that the Mg ii h line source function includes a scattering component. There is a significant difference (35%) between the mean T{sub B} (1.25 mm) and mean T {sub rad} (Mg ii). Partitioning the maps into “sunspot,” “quiet areas,” and “plage regions” we find the relation between the IRIS Mg ii h line T {sub rad} and the ALMA T {sub B} region-dependent. We suggest this may be the result of regional dependences of the formation heights of the IRIS and ALMA diagnostics and/or the increased degree of coupling between the UV source function and the local gas temperature in the hotter, denser gas in plage regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Polarization and variability of compact sources measured in Planck time-ordered data

This paper introduces a new Planck Catalog of Polarized and Variable Compact Sources (PCCS-PV) comprising 153 sources, the majority of which are extragalactic. The data include both the total flux density and linear polarization measured by Planck with frequency coverage from 30 to 353 GHz, and temporal spacing ranging from days to years. We classify most sources as beamed, extragalactic radio sources; the catalog also includes several radio galaxies, Seyfert galaxies, and Galactic and Magellanic Cloud sources, including H II regions and planetary nebulae. An advanced extraction method applied directly to the multifrequency Planck time-ordered data, rather than the mission sky maps, was developed to allow an assessment of the variability of polarized sources. Our analysis of the time-ordered data from the Planck mission, tod2flux, allowed us to catalog the time-varying emission and polarization properties for these sources at the full range of polarized frequencies employed by Planck, 30-353 GHz. PCCS-PV provides the time-and frequency-dependent, polarized flux densities for all 153 sources. To illustrate some potential applications of the PCCS-PV, we conducted preliminary comparisons of our measurements of selected sources with published data from other astronomical instruments. In summary, we find general agreement between the Planck and the Institut de Radioastronomie Millimétrique (IRAM) polarization measurements as well as with the Metsähovi 37 GHz values at closely similar epochs. Here, these combined measurements also show the value of PCCS-PV results and the PCCS2 catalog for filling in missing spectral (or temporal) coverage and helping to define the spectral energy distributions of extragalactic sources. In turn, these results provide useful clues as to the physical properties of the sources.

79 ASTRONOMY AND ASTROPHYSICS↗

ALFALFA DISCOVERY OF THE NEARBY GAS-RICH DWARF GALAXY LEO P. I. H I OBSERVATIONS

The discovery of a previously unknown 21 cm H I line source identified as an ultra-compact high velocity cloud in the ALFALFA survey is reported. The H I detection is barely resolved by the Arecibo 305 m telescope {approx}4' beam and has a narrow H I linewidth (half-power full width of 24 km s{sup -1}). Further H I observations at Arecibo and with the Very Large Array corroborate the ALFALFA H I detection, provide an estimate of the H I radius, {approx}1' at the 5 Multiplication-Sign 10{sup 19} cm{sup -2} isophote, and show the cloud to exhibit a velocity field which, if interpreted as disk rotation, has an amplitude of {approx_equal}9.0 {+-} 1.5 km s{sup -1}. In other papers, Rhode et al. show the H I source to have a resolved stellar counterpart and ongoing star forming activity, while Skillman et al. reveal it as having extremely low metallicity: 12 + log (O/H) = 7.16 {+-} 0.04. The H I mass to stellar mass ratio of the object is found to be 2.6. We use the Tully-Fisher template relation in its baryonic form to obtain a distance estimate D{sub Mpc}=1.3{sup +0.9}{sub -0.5}. Additional constraints on the distance are also provided by the optical data of Rhode et al. and McQuinn et al., both indicating a distance in the range of 1.5 to 2.0 Mpc. The three estimates are compatible within their errors. The object appears to be located beyond the dynamical boundaries of, but still in close proximity to the Local Group. Its pristine properties are consistent with the sedate environment of its location. At a nominal distance of 1.75 Mpc, it would have an H I mass of {approx_equal} 1.0 Multiplication-Sign 10{sup 6} M {sub Sun }, a stellar mass of {approx_equal} 3.6 Multiplication-Sign 10{sup 5} M {sub Sun }, and a dynamical mass within the H I radius of {approx_equal} 1.5 Multiplication-Sign 10{sup 7} M {sub Sun }. This discovery supports the idea that optically faint-or altogether dark-low mass halos may be detectable through their non-stellar baryons.

79 ASTRONOMY AND ASTROPHYSICS↗

Hot filament performance in a Freeman ion source

Here, we report on the simulation results of the hot tungsten filament behavior in a Freeman ions source installed in the LANL electro-magnetic isotope separator (EMIS). The Freeman source enables us to ionize and extract high intensity single-charge ion beams from different gases as well as from various solid materials in order to purify the content of a selected isotope. We have modified our LANSCE H– Ion Source Filament Model to calculate the ion source working parameters during a beam production cycle and estimate the ion source filament lifetime. Two main mass erosion processes of the hot cathode in a Freeman ion source are included: thermal evaporation and plasma sputtering. The initial working temperature of the ion source filament was estimated to be in range of 2400 to 2500 K. The filament model shows that the plasma sputtering rate is several magnitude of order higher than the thermal evaporation rate. The results of ion source modeling were compared with recorded data during the EMIS beam production runs using krypton noble gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Setting the H-mode pedestal structure: variations of particle source location using gas puff and pellet fueling

Experiments in DIII-D show that a particle source location inside the top of the H-mode pedestal (pellets) maintains a higher pedestal pressure than an edge source (gas fueling) through a widening of the electron temperature pedestal with reduction of the temperature gradient. The effect of these two fueling schemes on the H-mode pedestal structure was examined in DIII-D by comparing controlled pellet-fueled and gas-fueled discharges across a fueling scan up to 40 torr 1 s –1 . High resolution electron profiles reveal that gas fueling lowers the pedestal pressure as the density profile shifts radially outwards and the separatrix density increases, while pellet fueling maintains a constant pedestal pressure. The neutral source locations from pellets and gas are determined with the PELLET and UEDGE codes, respectively, and quantify the particle source localization. Pellets provide significant ionization inside the pedestal top while gas puffing localizes ionization in the scrape-off-layer and pedestal foot, broadly consistent with the density profile structure influenced by the source. ELMs are observed to increase in frequency and reduce impurity content as fueling is increased. Stability analysis with ELITE shows that both conditions are near the type-I ELM corner of the peeling–ballooning stability diagram, which is altered significantly by the introduction of pellets. Since transport mechanisms are not observed to change substantially with particle source location, wider pedestals allow the pellet-fueled discharges to retain higher pedestal temperatures at similar pedestal densities. EPED1 is tested to capture the pedestal pressure, under-predicting the height with pellets and over-predicting the height with gas by ~15%. Overall, these results have important implications for future reactors where pellet fueling will be the primary particle source due to an opaque scrape-off-layer by showing that the neutral source location plays a role in setting the structure of the H-mode pedestal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

H 2 generation by the 10 B(n,α) 7 Li reaction in high temperature water

H 2 produced in water from the 10 B(n,α) 7 Li fission reaction has been measured up to 300 °C. Thermal energy neutrons from the Rhode Island Nuclear Science Center's 2 MW reactor interact with boric acid-containing water in temperature-controlled high-pressure cells made from tubing of either titanium or zirconium alloy. After exposure for a minimum of 1 h, the solution sample is extracted and sparged with argon. The H 2 entrained by the sparging gas is sampled with a small mass spectrometer. A small amount of sodium is included in the boric acid solution so that after sparging, samples can be collected for 24 Na activation measurements in a gamma spectrometer to determine the neutron exposure and thus the total energy deposited in solution. The G-value (μmol/J) for H 2 production is obtained for water at a pressure of 25 MPa, over a temperature range from 20 °C to 300 °C. The weak temperature dependence of this yield between 150 °C and 200 °C demonstrates that the bimolecular reaction of pairs of e$^{–}_{aq}$ is a very minor source of H 2 in high LET tracks.

10B↗

Project X RFQ EM Design

Project X is a proposed multi-MW proton facility at Fermi National Accelerator Laboratory (FNAL). The Project X front-end would consist of an H- ion source, a low-energy beam transport (LEBT), a CW 162.5 MHz radio-frequency quadrupole (RFQ) accelerator, and a medium-energy beam transport (MEBT). Lawrence Berkeley National Laboratory (LBNL) and FNAL collaboration is currently developing the designs for various components in the Project X front end. This paper reports the detailed EM design of the CW 162.5 MHz RFQ that provides bunching of the 1-10 mA H- beam with acceleration from 30 keV to 2.1 MeV.

43 PARTICLE ACCELERATORS↗

Design improvements to the SNS ion source and diagnostics

The U.S. Spallation Neutron Source (SNS) is a state-of-the-art neutron scattering facility delivering the world's most intense pulsed-neutron beams to a wide array of instruments which are used to conduct investigations in many fields of science and engineering. The accelerator system is fed by an RF-driven, multicusp, H - ion source which nominally provides pulsed beam currents of 50-60 mA (1ms, 60Hz). This report provides a discussion of ongoing design improvements to the SNS ion source and Low Energy Beam Transport (LEBT) as well as diagnostic upgrades undertaken since the previous ICIS conference. These improvements include (i) simple mechanical modifications to the source outlet aperture which resulted in dramatically increased extracted beam current and comparable or lower emittance at similar beam currents, (ii) design improvements to the LEBT chopper target which will enable full power beam-dumping during physics studies, (iii) refinement of the SNS Allison emittance scanner that has enabled the first reliable LEBT beam measurements at full beam power (65kV, 50-100mA, 1ms, 60Hz) on the SNS ion source test stand and (iv) the implementation of a thermal imaging camera for the monitoring the LEBT electrode temperatures. (v) The design of an advanced Cs system, capable of more efficient Cs utilization with significantly lower Cs losses from the source is also presented. Mechanical details, computational simulations and experimental results are discussed within the context of these improvements.

47 OTHER INSTRUMENTATION↗

Algorithmic Patterns for $$\mathcal {H}$$-Matrices on Many-Core Processors

In this work, we consider the reformulation of hierarchical ( \(\mathcal {H}\) ) matrix algorithms for many-core processors with a model implementation on graphics processing units (GPUs). \(\mathcal {H}\) matrices approximate specific dense matrices, e.g., from discretized integral equations or kernel ridge regression, leading to log-linear time complexity in dense matrix–vector products. The parallelization of \(\mathcal {H}\) matrix operations on many-core processors is difficult due to the complex nature of the underlying algorithms. While previous algorithmic advances for many-core hardware focused on accelerating existing \(\mathcal {H}\) matrix CPU implementations by many-core processors, we here aim at totally relying on that processor type. As main contribution, we introduce the necessary parallel algorithmic patterns allowing to map the full \(\mathcal {H}\) matrix construction and the fast matrix–vector product to many-core hardware. In this work, crucial ingredients are space filling curves, parallel tree traversal and batching of linear algebra operations. The resulting model GPU implementation hmglib is the, to the best of the authors knowledge, first entirely GPU-based Open Source \(\mathcal {H}\) matrix library of this kind. We investigate application examples as present in kernel ridge regression, Gaussian Process Regression and kernel-based interpolation. In this context, an in-depth performance analysis and a comparative performance study against a standard multi-core CPU \(\mathcal {H}\) matrix library highlights profound speedups of our many-core parallel approach.

97 MATHEMATICS AND COMPUTING↗

DISCOVERY OF z {approx} 8 GALAXIES IN THE HUBBLE ULTRA DEEP FIELD FROM ULTRA-DEEP WFC3/IR OBSERVATIONS

We utilize the newly acquired, ultra-deep WFC3/IR observations over the Hubble Ultra Deep Field (HUDF) to search for star-forming galaxies at z {approx} 8-8.5, only 600 million years from recombination, using a Y {sub 105}-dropout selection. The new 4.7 arcmin{sup 2} WFC3/IR observations reach to {approx}28.8 AB mag (5{sigma}) in the Y {sub 105} J {sub 125} H {sub 160} bands. These remarkable data reach {approx}1.5 AB mag deeper than the previous data over the HUDF, and now are an excellent match to the HUDF optical ACS data. For our search criteria, we use a two-color Lyman break selection technique to identify z {approx} 8-8.5Y {sub 105}-dropouts. We find five likely z {approx} 8-8.5 candidates. The sources have H {sub 160}-band magnitudes of {approx}28.3 AB mag and very blue UV-continuum slopes, with a median estimated {beta} of {approx}<-2.5 (where f {sub {lambda}} {proportional_to} {lambda}{sup {beta}}). This suggests that z {approx} 8 galaxies are not only essentially dust free but also may have very young ages or low metallicities. The observed number of Y {sub 105}-dropout candidates is smaller than the 20 {+-} 6 sources expected assuming no evolution from z {approx} 6, but is consistent with the five expected extrapolating the Bouwens et al. luminosity function (LF) results to z {approx} 8. These results provide evidence that the evolution in the LF seen from z {approx} 7 to z {approx} 3 continues to z {approx} 8. The remarkable improvement in the sensitivity of WFC3/IR has enabled Hubble Space Telescope to cross a threshold, revealing star-forming galaxies at z{approx} 8-9.

79 ASTRONOMY AND ASTROPHYSICS↗

Understanding the mechanisms of interfacial reactions during TiO{sub 2} layer growth on RuO{sub 2} by atomic layer deposition with O{sub 2} plasma or H{sub 2}O as oxygen source

In this paper, TiO{sub 2} layers grown on RuO{sub 2} by atomic layer deposition (ALD) using tetrakis (dimethyla-mino) titanium (TDMAT) and either oxygen plasma or H{sub 2}O as oxygen source were analyzed using X-ray diffraction (XRD), Raman spectroscopy, and depth-resolved X-ray Photoelectron spectroscopy (XPS). The main objective is to investigate the surface chemical reactions mechanisms and their influence on the TiO{sub 2} film properties. The experimental results using XRD show that ALD deposition using H{sub 2}O leads to anatase TiO{sub 2} whereas a rutile TiO{sub 2} is obtained when oxygen-plasma is used as oxygen source. Depth-resolved XPS analysis allows to determine the reaction mechanisms at the RuO{sub 2} substrate surface after growth of thin TiO{sub 2} layers. Indeed, the XPS analysis shows that when H{sub 2}O assisted ALD process is used, intermediate Ti{sub 2}O{sub 3} layer is obtained and RuO{sub 2} is reduced into Ru as evidenced by high resolution transmission electron microscopy. In this case, there is no possibility to re-oxidize the Ru surface into RuO{sub 2} due to the weak oxidation character of H{sub 2}O and an anatase TiO{sub 2} layer is therefore grown on Ti{sub 2}O{sub 3}. In contrast, when oxygen plasma is used in the ALD process, its strong oxidation character leads to the re-oxidation of the partially reduced RuO{sub 2} following the first Ti deposition step. Consequently, the RuO{sub 2} surface is regenerated, allowing the growth of rutile TiO{sub 2}. A surface chemical reaction scheme is proposed that well accounts for the observed experimental results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ecosystem fluxes of hydrogen in a mid-latitude forest driven by soil microorganisms and plants

Molecular hydrogen (H 2 ) is an atmospheric trace gas with a large microbe-mediated soil sink, yet cycling of this compound throughout ecosystems is poorly understood. Measurements of the sources and sinks of H 2 in various ecosystems are sparse, resulting in large uncertainties in the global H 2 budget. Constraining the H 2 cycle is critical to understanding its role in atmospheric chemistry and climate. We measured H 2 fluxes at high frequency in a temperate mixed deciduous forest for 15 months using a tower-based flux-gradient approach to determine both the soil-atmosphere and the net ecosystem flux of H 2 . We also found that Harvard Forest is a net H 2 sink (-1.4 ± 1.1 kg H 2 ha -1 ) with soils as the dominant H 2 sink (-2.0 ± 1.0 kg H 2 ha -1 ) and aboveground canopy emissions as the dominant H 2 source (+0.6 ± 0.8 kg H 2 ha -1 ). Aboveground emissions of H 2 were an unexpected and substantial component of the ecosystem H 2 flux, reducing net ecosystem uptake by 30% of that calculated from soil uptake alone. Soil uptake was highly seasonal (July maximum, February minimum), positively correlated with soil temperature and negatively correlated with environmental variables relevant to diffusion into soils (i.e., soil moisture, snow depth, snow density). Soil microbial H 2 uptake was correlated with rhizosphere respiration rates (r = 0.8, P < 0.001), and H 2 metabolism yielded up to 2% of the energy gleaned by microbes from carbon substrate respiration. Here, we elucidate key processes controlling the biosphere–atmosphere exchange of H 2 and raise new questions regarding the role of aboveground biomass as a source of atmospheric H 2 and mechanisms linking soil H 2 and carbon cycling. Our results should be incorporated into modeling efforts to predict the response of the H 2 soil sink to changes in anthropogenic H 2 emissions and shifting soil conditions with climate and land-use change.

54 ENVIRONMENTAL SCIENCES↗

ARE NEWLY DISCOVERED H I HIGH-VELOCITY CLOUDS MINIHALOS IN THE LOCAL GROUP?

A set of H I sources extracted from the north Galactic polar region by the ongoing ALFALFA survey has properties that are consistent with the interpretation that they are associated with isolated minihalos in the outskirts of the Local Group (LG). Unlike objects detected by previous surveys, such as the compact high-velocity clouds of Braun and Burton, the H I clouds found by ALFALFA do not violate any structural requirements or halo scaling laws of the {lambda}CDM structure paradigm, nor would they have been detected by extant H I surveys of nearby galaxy groups other than the LG. At a distance of d Mpc, their H I masses range between 5 x 10{sup 4} d {sup 2} and 10{sup 6} d {sup 2} M {sub sun} and their H I radii between <0.4d and 1.6d kpc. If they are parts of gravitationally bound halos, the total masses would be on the order of 10{sup 8}-10{sup 9} M {sub sun}, their baryonic content would be significantly smaller than the cosmic fraction of 0.16 and present in a ionized gas phase of mass well exceeding that of the neutral phase. This study does not however prove that the minihalo interpretation is unique. Among possible alternatives would be that the clouds are shreds of the Leading Arm of the Magellanic Stream.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron Localization in Dissociating H 2 + by Retroaction of a Photoelectron onto Its Source

We investigate the dissociation of H 2 + into a proton and a H 0 after single ionization with photons of an energy close to the threshold. We find that the p + and the H 0 do not emerge symmetrically in the case of the H 2 + dissociating along the 1sσ g ground state. Instead, a preference for the ejection of the p + in the direction of the escaping photoelectron can be observed. This symmetry breaking is strongest for very small electron energies. Our experiment is consistent with a recent prediction by Serov and Kheifets. In their model, which treats the photoelectron classically, the symmetry breaking is induced by the retroaction of the long-range Coulomb potential onto the dissociating H 2 + .

74 ATOMIC AND MOLECULAR PHYSICS↗

Resolving Discrepancies Between Theory and Experiment for the NCN + H Reaction

Flame modeling studies have highlighted the role of branching in the kinetics for the prompt NO switch reaction, NCN + H. In this reaction, there is strong competition between the CH + N2 (R1) and HCN + N (R2) product channels. Increased branching towards reaction R2 promotes the subsequent formation of Fenimore or Prompt NO. Recent direct shock tube studies on this complex reaction conclude that branching to reaction R2 is much more favorable than the predicted branching from theoretical studies. The experimentally predicted prompt NO switch temperature (TS), i.e., the temperature at which k2/(k1+k2) = 0.5, is at 1670 K, in contrast to theory that predicts Ts > 3200 K. The present theory/modeling work was initiated to highlight potential causes for this significant discrepancy between experiment and theory. Our analysis of the simulations reported in the experimental studies indicate that including a fall-off representation for C2H5 radical dissociation (with C2H5 produced from C2H5I dissociation and acting as an H-atom source) has a noticeable influence on the simulations for NCN decay and HCN formation in the shock tube studies. With the inclusion of a theory-based pressure fall-off representation for C2H5 dissociation, we show that this radical persists for much longer timescales even at the high-temperatures in the shock tube studies. This persistence then facilitates the rapid conversion of reactive H-atoms to CH3 radicals at the shock tube conditions via the H + C2H5 → CH3 + CH3 reaction. An updated theoretical analysis for this classic addition-elimination reaction is also provided in this work. The rapid formation of CH3 radicals necessitates the inclusion of additional reactions to adequately simulate the NCN and HCN data. Our simulations conclude that, with the inclusion of these additional reactions, the NCN and HCN profiles can be reasonably well simulated by the most recent theoretical predictions.

Ethyl Radicals↗

Workflow for Developing and Operating Subsurface Hydrogen Storage Facilities in Porous Reservoirs

Long-duration (seasonal) storage of natural gas (NG), which primarily consists of methane (CH 4 ), has been practiced for more than a hundred years at underground gas storage (UGS) facilities that use depleted hydrocarbon reservoirs, saline aquifers, and salt caverns. To enable hydrogen (H 2 ) to be used as a long-duration, energy-storage medium, similar facilities are envisioned for underground H 2 storage (UHS) of either H 2 or H 2 /NG mixtures. Experience with UGS can be used to guide recommended practices for developing and operating UHS facilities in porous reservoirs. The most important factors (formation/fluid properties and engineering choices) that influence the performance of UHS reservoirs have been identified and quantified in previous studies. These factors and choices influence phenomena that determine the sweep efficiency of the stored working gas. These phenomena include viscous fingering, hysteretic capillary trapping, and gravity override of the working gas, as well as the upconing of nonproductive fluid that determine the sweep efficiency of the stored working gas. This report describes initial recommended-practices and a project-development workflow for UHS facilities that utilize porous reservoirs, based on the current state-of-knowledge about H 2 behavior in the subsurface. The workflow sequentially addresses all aspects of UHS project development, including the identification of H 2 sources and users, site ranking and down-selection, geologic and reservoir-engineering characterization, reservoir design, testing, risk management, commissioning, operations, and monitoring for a UHS facility. The goal is to enable UHS facilities to be developed in an efficient and timely manner, while carefully managing project risks. This workflow is similar to that which has been developed for UGS facilities (see Figure 1 of API, 2022), with the addition of tasks and subtasks specific to H 2 and UHS. The project-development workflow is broken down into three major stages: (1) define the H 2 use case; (2) rank, down-select, and characterize potential, candidate UHS sites; and (3) reservoir design, integrity testing, risk assessment, commissioning, operations, and monitoring for selected UHS sites. Each major stage is further broken down into tasks and subtasks, which are described at a high level. This report also provides more detailed descriptions of all tasks and subtasks that involve reservoir analysis and testing.

08 HYDROGEN↗

Design and Analysis of the PXIE CW Radio-frequency Quadrupole (RFQ)

The Project X Injector Experiment (PXIE) will be a prototype front end of the Project X accelerator proposed by Fermilab. PXIE will consist of an H- ion source, a low-energy beam transport (LEBT), a radio-frequency quadrupole (RFQ) accelerator , a medium-energy beam transport (MEBT) and a section of superconducting cryomodules that will accelerate the beam from 30 keV to 30 MeV. LBNL has developed an RFQ design for PXIE with fabrication scheduled to begin before the end of CY 2012. The chosen b aseline design is a four-vane, 4.4 m long CW RFQ with a resonant frequency at 162.5 MHz (2.4 wavelengths long). The RFQ will provide bunching and acceleration of a nominal 5 mA H- beam to 2.1 MeV. The relatively low wall power density results in wall powe r losses that are less than 100 kW. The beam dynamics design has been optimized to allow for more than 99% beam capture with exceptionally low longitudinal emittance. The RFQ mechanical design and the results of RF and thermal analyses are presented here.

43 PARTICLE ACCELERATORS↗

Robust control of the current profile and plasma energy in EAST

Integrated control of the toroidal current density profile, or alternatively the q-profile, and plasma stored energy is essential to achieve advanced plasma scenarios characterized by high plasma confinement, magnetohydrodynamics stability, and noninductively driven plasma current. The q-profile evolution is closely related to the evolution of the poloidal magnetic flux profile, whose dynamics is modeled by a nonlinear partial differential equation (PDE) referred to as the magnetic-flux diffusion equation (MDE). The MDE prediction depends heavily on the chosen models for the electron temperature, plasma resistivity, and non-inductive current drives. To aid control synthesis, control-oriented models for these plasma quantities are necessary to make the problem tractable. However, a relatively large deviation between the predictions by these control-oriented models and experimental data is not uncommon. For this reason, the electron temperature, plasma resistivity, and non-inductive current drives are modeled for control synthesis in this work as the product of an “uncertain” reference profile and a nonlinear function of the different auxiliary heating and current-drive (H&CD) source powers and the total plasma current. The uncertainties are quantified in such a way that the family of models arising from the modeling process is able to capture the q-profile and plasma stored energy dynamics from a typical EAST shot. A control-oriented nonlinear PDE model is developed by combining the MDE with the “uncertain” models for the electron temperature, plasma resistivity, and non-inductive current drives. This model is then rewritten into a control framework to design a controller that is robust against the modeled uncertainties. The resulting controller utilizes EAST's H&CD powers and total plasma current to regulate the q profile and plasma stored energy even when mismatches between modeled and actual dynamics are present. The effectiveness of the controller is demonstrated through nonlinear simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗