Search NASA⌕ Search

SEARCH · Search NASA

Results for “HUBBLE SPACE TELESCOPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Detection of CO Cameron band emission in comet P/Hartley 2 (1991 XV) with the Hubble Space Telescope

Ultraviolet (UV) spectra of comet P/Hartley 2 (1991 XV) taken with the Faint Object Spectrograph (FOS) on the Hubble Space Telescope (HST) in 1991 September reveal several bands of the Cameron system of CO (a 3 Pi-X 1 Sigma). These band are most likely due to 'prompt' emission from CO2 and, thus, provide a direct tracer of the CO2 abundance in the nucleus. Photodissociative excitation of CO2 is probably the largest contributor to the Cameron band emission, but significant contributions from electron impact excitation of CO, electron impact dissociation of CO2, and dissociative recombination of CO2(+), are also possible. Using our estimate that photodissociative excitation is responsible for approximately 60% of the total excitation of the Cameron system, we derive Q(sub CO2) approximately 2.6 x 10(exp 27) molecules/s, which implies CO2/H20 approximately 4%. If all of the Cameron band emission is due to photodissociative excitation, then CO2/H2O = 7 +/- 2%. For the largest possible contributions from the other excitation mechanisms considered, the CO2 abundance could be as a small as aproximately 2-3%. We did not detect CO Fourth Positive Group emission in our data and derive an upper limit of CO/H2O less than or equal to 1% (3 sigma) for CO coming directly from the nucleus. Comparison of the relative CO2 and CO abundances in P/Hartley 2 to those in P/Halley (CO2/H2O approximately 3%-4%, CO/H20 approximately 4% for the nucleus source) indicates that selective devolatilization of the nucleus may have occurred for P/Hartley 2. A relatively large CO2/CO ratio (i.e., approximately greater than 1) seems to be a common property of cometary nuclei. Since gas phase chemistry, in either the solar nebula or the interstellar medium (ISM), appears incapable of producing large relative CO2 abundances, the CO2 in cometary nuclei is probably produced either by UV and/or cosmic ray irradiation of ISM grains prior to the formation of the Solar System, or by condensation fractionation in the solar nebula.

Weaver, H. A.↗

Searching for Faint Companions to Nearby Stars with the Hubble Space Telescope

A search for faint companions (FC's) to selected stars within 5 pc of the Sun using the Hubble Space Telescope's Planetary Camera (PC) has been initiated. To assess the PC's ability to detect FCs, we have constructed both model and laboratory-simulated images and compared them to actual PC images. We find that the PC's point-spread function (PSF) is 3-4 times brighter over the angular range 2-5 sec than the PSF expected for a perfect optical system. Azimuthal variations of the PC's PSF are 10-20 times larger than expected for a perfect PSF. These variations suggest that light is scattered nonuniformly from the surface of the detector. Because the anomalies in the PC's PSF cannot be precisely simulated, subtracting a reference PSF from the PC image is problematic. We have developed a computer algorithm that identifies local brightness anomalies within the PSF as potential FCs. We find that this search algorithm will successfully locate FCs anywhere within the circumstellar field provided that the average pixel signal from the FC is at least 10 sigma above the local background. This detection limit suggests that a comprehensive search for extrasolar Jovian planets with the PC is impractical. However, the PC is useful for detecting other types of substellar objects. With a stellar signal of 10(exp 9) e(-), for example, we may detect brown dwarfs as faint as M(sub I) = 16.7 separated by 1 sec from alpha Cen A.

Schroeder, Daniel J.↗

Physical and Thermal Properties Evaluated of Teflon FEP Retrieved From the Hubble Space Telescope During Three Servicing Missions

Mechanical properties of aluminized Teflon fluorinated ethylene propylene (FEP) thermal control materials on the Hubble Space Telescope (HST) exposed to low Earth orbit for up to 9.7 years have significantly degraded, with extensive cracking occurring on orbit. The NASA Glenn Research Center and the NASA Goddard Space Flight Center have collaborated on analyzing the physical and thermal properties of aluminized FEP (FEP-Al, DuPont) materials retrieved in December 1999 during HST's third servicing mission (SM3A). Comparisons have been made to properties of FEP-Al retrieved during the first and second HST servicing missions, SM1 and SM2, in order to determine degradation processes for FEP on HST.

Dever, Joyce A.↗

New Understanding of Hubble Space Telescope Gyro Current Increase Led to a Method to Save a Failing Gyro Presentation

Throughout the history of the Hubble Space Telescope (HST) program, gyro current increases have been observed to occur, often times leading to gyro failure. The explanation was that debris from the surfaces of the gas bearings, with only 1.27 micron clearance, resulted in rotor restriction, which increased friction, torque, and current. However, the rotor restriction theory never could account for the fact that a restart of the gyro would restore the current back to nominal. An effort was made to understand this puzzling gyro behavior after two HST gyros exhibited increased current within the same week in November 2015. A review board was created to resolve these anomalies and generate operational procedures to potentially extend gyro life. A new understanding of gyro current behavior led to implementation of a method that could potentially save a failing gyro.

mechanism↗

Hubble Space Telescope Angular Velocity Estimation During the Robotic Servicing Mission

In 2004 NASA began investigation of a robotic servicing mission for the Hubble Space Telescope (HST). Such a mission would require estimates of the HST attitude and rates in order to achieve a capture by the proposed Hubble robotic vehicle (HRV). HRV was to be equipped with vision-based sensors, capable of estimating the relative attitude between HST and HRV. The inertial HST attitude is derived from the measured relative attitude and the HRV computed inertial attitude. However, the relative rate between HST and HRV cannot be measured directly. Therefore, the HST rate with respect to inertial space is not known. Two approaches are developed to estimate the HST rates. Both methods utilize the measured relative attitude and the HRV inertial attitude and rates. First, a non-linear estimator is developed. The nonlinear approach estimates the HST rate through an estimation of the inertial angular momentum. Second, a linearized approach is developed. The linearized approach is a pseudo-linear Kalman filter. Simulation test results for both methods are given. Even though the development began as an application for the HST robotic servicing mission, the methods presented are applicable to any rendezvous/capture mission involving a non-cooperative target spacecraft.

Thienel, Julie K.↗

Hubble Space Telescope Angular Velocity Estimation During the Robotic Servicing Mission

In 2004 NASA began investigation of a robotic servicing mission for the Hubble Space Telescope (HST). Such a mission would require estimates of the HST attitude and rates in order to achieve a capture by the proposed Hubble robotic vehicle (HRV). HRV was to be equipped with vision-based sensors, capable of estimating the relative attitude between HST and HRV. The inertial HST attitude is derived from the measured relative attitude and the HRV computed inertial attitude. However, the relative rate between HST and HRV cannot be measured directly. Therefore, the HST rate with respect to inertial space is not known. Two approaches are developed to estimate the HST rates. Both methods utilize the measured relative attitude and the HRV inertial attitude and rates. First, a nonlinear estimator is developed. The nonlinear approach estimates the HST rate through an estimation of the inertial angular momentum. The development includes an analysis of the estimator stability given errors in the measured attitude. Second, a linearized approach is developed. The linearized approach is a pseudo-linear Kalman filter. Simulation test results for both methods are given, including scenarios with erroneous measured attitudes. Even though the development began as an application for the HST robotic servicing mission, the methods presented are applicable to any rendezvous/capture mission involving a non-cooperative target spacecraft.

Thienel, Julie K.↗

Hubble Space Telescope Imaging of Three Isolated Faint Dwarf Galaxies beyond the Local Group: Pavo, Corvus A, and Kamino

We present new Hubble Space Telescope (HST) imaging of three recently discovered star-forming dwarf galaxies beyond the Local Group: Pavo, Corvus A, and Kamino. The discovery of Kamino is reported here for the first time. They rank among the most isolated faint dwarf galaxies known; hence they provide unique opportunities to study galaxy evolution at the smallest scales, free from the environmental effects of more massive galaxies. Our HST data reach ∼2–4 magnitudes below the tip of the red giant branch (TRGB) for each dwarf, allowing us to measure their distances, structural properties, and recent star formation histories (SFHs). All three galaxies contain a complex stellar population of young and old stars, and are typical of field galaxies in this mass regime (M V = −10.62 ± 0.08 and $D = 2.16_{-0.07}^{+0.08}$ Mpc for Pavo, M V = −10.91 ± 0.10 and D = 3.34 ± 0.11 Mpc for Corvus A, and M V = −12.02 ± 0.12 and $D = 6.50_{-0.11}^{+0.15}$ Mpc for Kamino). Our HST-derived SFHs reveal differences among the three dwarfs: Pavo and Kamino show relatively steady, continuous star formation, while Corvus A formed ∼60% of its stellar mass by 10 Gyr ago. These results align with theoretical predictions of diverse evolutionary pathways for isolated low-mass galaxies.

Mutlu-Pakdil, Burçin [Dartmouth College, Hanover, ↗

The Hubble Space Telescope Scientific Instruments

The paper describes the status of the five Scientific Instruments (SI's) to be flown on the Hubble Space Telescope (HST) which is planned to be launched by the Space Transportation System in the last half of 1986. Concentration is on the testing experience for each of the instruments both at the instrument level and in conjunction with the other instruments and subsystems of the HST. Since the Acceptance/Flight Qualification Program of the HST is currently underway a description of the test and verification plans to be accomplished prior to shipment to the Kennedy Space Center (KSC) and pre-launch tests plans prior to launch are provided. The paper concludes with a brief description of anticipated orbital performance.

Moore, J. V.↗

The proposal entry processor: Telescience applications for Hubble Space Telescope science operations

The Proposal Entry Processor (PEP) System supports the submission, entry, technical evaluation review, selection and implementation of Hubble Space Telescope (HST) observing proposals. The PEP system is described concentrating on features which illustrate principles of telescience as applied to the HST. These principles are applicable to other observatories, both space and ground based. The PEP proposal forms allow a scientist to specify scientific objectives without becoming needlessly involved in implementation details. The Remote Proposal Submission System (RPSS) allows proposers to submit proposals electronically via Telenet, SPAN, and other networks. The RPSS performs syntax and sematic checks on proposals. The PEP uses a fourth generation database system to store proposal information and to allow general queries and reports. The Transformation subsystem uses an expert system written in OPS5 to cast a scientific description of an observing program into parameters used by the planning and scheduling system. The TACOS system is a natural language database which supports the proposal selection process. Technical evaluations for resource usage and duplicate science are performed using rulebased systems.

Jackson, Robert↗

The second generation Wide-Field/Planetary Camera on the Hubble Space Telescope

The general design and principal features of the second generation Wide-Field/Planetary Camera (WFPC-2) for the Hubble Space Telescope are reviewed. The discussion covers the background of WFPC-2 development, science capabilities, key performance parameters, optical and electronic equipment, mechanisms, thermal control, and contamination control. Attention is also given to on-orbit operations, including commanding and telemetry and on-orbit servicing.

Leschly, Kim↗

A deconvolution technique for Hubble Space Telescope FGS fringe analysis

A technique has been developed for directly transforming interferometer fringe visibility functions ('S curves') from the Hubble Space Telescope (HST) fine guidance sensors (FGSs) into intensity profiles of the program object. In a process analogous to Fourier transform image deconvolution, an S curve from a double star yields a pair of narrow profiles containing information on the separation (in one coordinate), and relative brightness of the two stars. The procedure has yielded high internal precision for the separation and relative brightness in tests with HST data. Simulations indicate that it can also deconvolve S curves from multiple stars or continuous intensity distributions such as resolvable stellar or extragalactic objects. Similar deconvolution analyses may be useful in other types of interferometry.

Hershey, John L.↗

Contamination design of a Scientific Instrument Protective Enclosure for the Hubble Space Telescope Servicing Mission

A Scientific Instrument Protective Enclosure (SIPE) was designed to accommodate second generation science instruments (SIs) for the Hubble Space Telescope (HST) First Servicing Mission (FSM). One of the main design drivers for the SIPE is to provide a protective environment for the SIs against particulate and molecular contaminants that pose a viable threat to the SI performance. The focus of this paper will detail the methodology incorporated in the design of the SIPE to provide a controlled environment for SI protection at the launch site, during pre-launch/launch activities, and during on-orbit operations in the Shuttle bay.

Hedgeland, Randy J.↗

Hubble Space Telescope COSTAR asphere verification with a modified computer-generated hologram interferometer

To correct for the spherical aberration in the Hubble Space Telescope primary mirror, five anamorphic aspheric mirrors representing correction for three scientific instruments have been fabricated as part of the development of the corrective-optics space telescope axial-replacement instrument (COSTAR). During the acceptance tests of these mirrors at the vendor, a quick and simple method for verifying the asphere surface figure was developed. The technique has been used on three of the aspheres relating to the three instrument prescriptions. Results indicate that the three aspheres are correct to the limited accuracy expected of this test.

Feinberg, L.↗

Evaluation of COSTAR mass handling characteristics in an environment. A simulation of the Hubble Space Telescope service mission

The STS-61 Shuttle mission, which took place in December 1993, was solely aimed at servicing the Hubble Space Telescope (HST). Successful completion of this mission was critical to NASA since it was necessary to rectify a flaw in the HST mirror. In addition, NASA had never scheduled a mission with such a high quantity of complex extravehicular activity. To meet the challenge of this mission, the STS-61 crew trained extensively in the Weightless Environment Test Facility at the Johnson Space Center and in the Neutral Buoyancy Simulator at the Marshall Space Flight Center. However, it was suspected that neutral buoyancy training might induce negative training by virtue of the viscous damping effect present in water. The mockups built for this training also did not have the mass properties of the actual orbital replacement units (ORUs). It was felt that the crew should be further trained on mockups with similar mass characteristics. A comprehensive study was designed to address these issues. The study was quantitative, and instrumentation was set up to measure and quantify the forces and moments experienced during ORU mass handling and remote manipulator system run conditions.

Rajulu, Sudhakar L.↗

Hubble Space Telescope imaging of the central star forming region in NGC 1140 (exp 1)

We present broadband images taken with the Hubble Space Telescope's Planetary Camera of the central supergiant H II region in the amorphous galaxy NGC 1140. These images allow observations to a resolution of about 13 pc at the galaxy, and they reveal that its central 1/2 kpc contains 6-7 blue, luminous, compact super star clusters, many of which would be comparable in luminosity to globular clusters at the same age. A blue arc-shaped structure near the center may be a grouping of less luminous, R136/NGC 2070-sized clusters or a sheet of OB stars. Additional somewhat less luminous and redder clusters are also found farther out from the center. If these clusters are older, they too could have had luminosities comparable to those of the central six clusters at a comparable age. Thus, we find that NGC 1140 is remarkable in the number of extreme clusters that it has formed recently in a relatively small area of the galaxy. Since NGC 1140 exhibits global characteristics that are consistent with a recent merger, these clusters are likely to be a product of that event. This galaxy adds to the number of cases where rapid star formation has evidently produced super star clusters.

Hunter, Deidre A.↗

The gaseous extent of galaxies and the origin of Lyman-alpha absorption systems: A survey of galaxies in the fields of Hubble Space Telescope spectroscopic target QSOs

We present initial results of an imaging and spectroscopic survey of faint galaxies in fields of Hubble Space Telescope (HST) spectroscopic target QSOs. The primary objectives of the survey are (1) to determine the incidence, extent, and covering factor of extended gaseous envelopes of luminous galaxies and (2) to determine the fraction of Ly(alpha) absorption systems that arise in luminous galaxies. The goal of the survey is to identify in each field under construction all objects with apparent r-band magnitudes satisfying r less than 21.5 within angular distances to the QSOs satisfying 0 less thyan 1.3'. The current observations cover six fields and are 37% complete to the goal ofthe survey. These observations identify 46 galaxies at redshifts spanning z = 0.0700-0.5526 and at impact parameters to the QSOs spanning rho = 16.6-346.9/h kpc. Of these galaxies, 11 are coincident in redshift with absorption systems and 21 do not give rise to absorption to within sensitive upper limits. Nine galaxies are coincident in redshift with 'Ly(alpha)-forest' absorption systems that show Ly(alpha) absorption but no corresponding metal-line absorption, and two galaxies are coincident in redshift with C IV absorption systems that show both Ly(alpha) and C IV absorption. Various lines of evidence demonstrate that the coincident galaxies are responsible for the corresponding absorption systems and are not present as the result of chance coincidence or merely spatial correlated with the absorption systems. The most important evidence is that there exists a statistical anti-correlation between Ly(aplha) rest-frame equivalent width and the impact parameter. Each of five galaxies with rho = 70-160/h kpc give rise to Ly(alpha) absorption, and just one of nine galaxies with rho greater than 70-160/h kpc gives rise to Ly(alpha) absorption. At least eight of 23 Ly(alpha) absorption systyems arise in galaxies. On the basis of these results we reach the following conclusions: (1) At z less than or approximately = 1 most luminosu galaxies are surrounded by extended gaseous envelopes of approximately = 160/h kpc radius and of roughly unit covering factor. This conclusion confirms previous speculation that normal luminosu galaxies possess extended gaseous halos or extended gaseous disks. (2) At z less than or approximately = 1 the fraction of Ly(aplha) absorption systems-including Ly(alpha)-forest absorption systems-that arise in luminous galaxies is at least 0.32 +/- 0.10 and may be as high as 0.60 +/- 0.19. This conclusion runs contrary to the longstanding belief that Ly(alpha)-forest absorption systems arise in intergalactic clouds.

Lanzetta, Kenneth M.↗

Hubble Space Telescope Metallized Teflon(registered trademark) FEP Thermal Control Materials: On-Orbit Degradation and Post-Retrieval Analysis

During the Hubble Space Telescope (HST) Second Servicing Mission (SM2), degradation of unsupported Teflon(Registered Trademark) FEP (fluorinated ethylene propylene), used as the outer layer of the multilayer insulation (MLI) blankets, was evident as large cracks on the telescope light shield. A sample of the degraded outer layer was retrieved during the mission and returned to Earth for ground testing and evaluation. The results of the Teflon(Registered Trademark) FEP sample evaluation and additional testing of pristine Teflon(Registered Trademark) FEP led the investigative team to theorize that the HST damage was caused by thermal cycling with deep-layer damage from electron and proton radiation which allowed the propagation of cracks along stress concentrations , and that the damage increased with the combined total dose of electrons, protons, UV and x-rays along with thermal cycling. This paper discusses the testing and evaluation of the retrieved Teflon(Registered Trademark) FEP.

Townsend, Jacqueline A.↗

Hubble Space Telescope spectroscopy of OB stars in M31

We have obtained UV spectra of two luminous hot stars in M31 with the Hubble Space Telescope. The stars are of late O and WN spectral type and lie on opposite sides of M31. We derive UV extinction curves for M31 which differ from both the Galaxy and the LMC. We find differences between the IS absorbers in both lines of sight in M31 and in the Galactic halo. The stellar wind-driven mass loss of the stars is found to be 10 times lower than in similar Galactic stars. One star appears to be an eclipsing W-R binary.

Hutchings, J. B.↗