Search NASA⌕ Search

SEARCH · Search NASA

Results for “Halogenation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Evaluating the photophysical and photochemical characteristics of green-emitting cerium(III) mono-cyclooctatetraenide complexes

The photophysical and photochemical reactivity of the organometallic mono(cyclooctatetraenide)-Ce(III) complexes: [(C 8 H 8 )Ce(μ-X)(THF) 2 ] 2 X = O 3 SCF 3 - (1), Cl - (2), were studied. Here, in the course of these studies, a new polymorph of [(C 8 H 8 )Ce(μ-O 3 SCF 3 )(THF) 2 ] 2 (1) was described. Photoluminescence (PL) studies of 1 and 2 showed characteristic excitation and emission bands in the visible region, with bright green light emission under light irradiation from states corresponding to the 5d → 4f transition. Complexes 1 and 2 exhibit relatively long lifetime of 205.4 ± 0.2 and 145.8 ± 0.4 ns respectively. And the quantum yields (Φ) for 1 and 2 are 0.180 and 0.068 respectively. Electrochemical studies were performed on complexes 1 and 2 with a reversible Ce(III)/Ce(IV) redox couple recorded at $E_{1/2}$ = -1.53 V versus the Fc/Fc + for 2. Complex 1 shows an irreversible Ce(III/IV) oxidation wave. Complexes 1 and 2 revealed strongly-reducing, estimated, excited state reduction potentials ($E^*_{1/2}$) of -3.31 and -4.02 V versus the Fc/Fc + respectively, with small Stokes shifts of 0.12 eV. With their associated relatively long lifetimes, small Stokes shifts and large, negative $E^*_{1/2}$ values, both complexes were evaluated as potential photosensitisers for halogen atom transfer (XAT) using a test reaction of the dehalogenation of benzyl chloride.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chlorine gas and anion radical reactivity in molten salts and the link to chlorobasicity

Next-generation nuclear power plants may include exciting novel designs in which molten salts are the coolant or a combination of the coolant and fuel. Whereas it is straightforward to see why having a low volatility coolant can be advantageous for safety, much is not understood about the production of volatile halogen gases as a result of radiation and even less is known about the distribution of these species at and away from interfaces. Using first principles molecular dynamics simulations, we investigate the product of the disproportionation reaction between chlorine anion radicals (nominally Cl 2 ˙ − ) in the bulk and slab configurations. We find that the product depends on the chlorobasicity of the medium. For example, in ZnCl 2 , Cl 2 forms, but in a eutectic mixture of LiCl and KCl, Cl 3 − is formed as a product. We also find that Cl 3 − prefers to form at the vapor interface and this may have implications for corrosion and reactivity. Furthermore, the mechanisms of the mobility of Cl 2 and Cl 3 − are radically different, the first one being vehicular and the second Grotthus-like. Chlorobasicity is linked to the electronic structure of the host melt; ZnCl 2 forms extended networks along which metal ions and anionic counterions have significant electronic orbital overlap forming long, linear, molecular-like constructs; the opposite is true for the alkali metal eutectic salt.

Nguyen, Hung H. [Univ. of Iowa, Iowa City, IA (Uni↗

Experimental determination of the magnetic anisotropy in five-coordinated Co( II ) field-induced single molecule magnets

Magnetic anisotropy of the central metal atom is a crucial property of single molecule magnets (SMMs). Small structural changes can alter the magnetic properties, and accurate experimental methods to investigate magnetic anisotropy are therefore critical. Here, we investigate two five-coordinated Co( II ) SMMs, [CoCl 2 Cltpy] (1) and [CoBr 2 Cltpy] (2) (Cltpy = 4′-chloro-2,2′:6′,2′′-terpyridine), through multiple techniques. Ab initio theoretical calculations performed on the two compounds show that both possess axial magnetic anisotropy with the magnetic easy axis pointing towards one of the terminal halogen atoms. Theoretical calculations on SMMs are typically done on isolated molecular species, and to validate this approximation the magnetic anisotropy was further studied through experimental techniques. EPR measurements confirm an axial anisotropy of 1, and magnetic measurements provide experimental Zero-Field Splitting (ZFS) parameters, showing that the values from theoretical calculations are slightly overestimated. The X-ray electron density determined from 20 K single-crystal synchrotron X-ray diffraction data provides estimated d-orbital populations also suggesting axial magnetic anisotropy in both systems, and furthermore suggesting a more pronounced axiality in 1 compared to 2. This is in good agreement with the results obtained from both magnetic measurements and theoretical calculations. The magnetic anisotropy of 1 is quantified experimentally through polarized powder neutron diffraction via the site susceptibility method, confirming an axial magnetic anisotropy of the compound. A slight deviation in the easy axis direction is observed between experimental and theoretical results. This, together with the overestimation of the ZFS parameters from theoretical calculations, shows that experimental investigation of the magnetic anisotropy of SMMs is of high relevance. Magnetic anisotropy of the central metal atom is a crucial property of single molecule magnets (SMMs).

Slavensky, Hannah H. [Aarhus Univ. (Denmark)] (ORC↗

High-resolution infrared spectroscopy of jet cooled CH 2 Br radicals: The symmetric CH stretch manifold and absence of nuclear spin cooling

Direct laser absorption of a slit supersonic discharge expansion provides the first high-resolution spectroscopic results on the symmetric CH stretch excitation (ν 1 ) of the bromomethyl (CH 2 Br) radical in the ground electronic state. Narrowband (<1 MHz) mid-infrared radiation is produced by difference-frequency generation of two visible laser beams, with the open shell halohydrocarbon radical generated by electron dissociative attachment of CH 2 Br 2 in a discharge and rapidly cooled to T rot = 18 ± 1 K in the subsequent slit-jet supersonic expansion. A rovibrational structure in the radical spectrum is fully resolved, as well as additional splittings due to spin-rotation effects and 79 Br/ 81 Br isotopologues in natural abundance. Spectroscopic constants and band origins are determined by fitting the transition frequencies to a non-rigid Watson Hamiltonian, yielding results consistent with a vibrationally averaged planar radical and an unpaired electron in the out-of-plane p π orbital. Additionally, extensive satellite band structure from a vibrational hot band is observed and analyzed. The hot band data is compared to CFOUR/VPT2 (CCSD(T)cc-pVQZ) ab initio anharmonic predictions of the vibration rotation alpha matrix, which permits unambiguous assignment to CH 2 symmetric-stretch excitation built on the singly excited CH 2 out-of-plane bending mode (ν 1 + ν 4 ← ν 4 ). Longitudinal cooling of the Doppler width in the slit-jet expansion geometry also reveals partially resolved hyperfine structure on transitions out of the lowest angular momentum states in excellent agreement with predictions based on microwave studies. High level ab initio MOLPRO calculations [CCSD(T)-f12b/VnZ-f12 (n = 3, 4, CBS)] are also performed with explicitly correlated f12 electron methods for the out-of-plane CH 2 bending mode over the halogen series CH 2 X (X = F, Cl, Br, I), which clearly reveals a non-planar geometry for X = F (with a ΔE ≈ 0.3 kcal/mol barrier) and yet planar equilibrium geometries for X = Cl, Br, and I. Finally, a detailed Boltzmann analysis of the transition intensities provides support for negligible collisional equilibration of the entangled H atom nuclear spin states on the few hundred microsecond time scale and high collision densities of a slit supersonic expansion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of spatially resolved Rashba states on the surface of CH 3 NH 3 PbBr 3 single crystals

Hybrid organic-inorganic perovskites (HOIPs) are prime candidates for studying Rashba effects due to the heavy metal and halogen atoms in their crystal structure coupled with predicted inversion symmetry breaking. Nevertheless, observation of the Rashba effect in cubic CH 3 NH 3 PbBr 3 single crystals that possess bulk inversion symmetry is the subject of extensive debate due to the lack of conclusive experiments and theoretical explanations. In this work, we provide experimental evidence that Rashba state in cubic CH 3 NH 3 PbBr 3 single crystals at room temperature occurs exclusively on the crystal surface and depends on specific surface termination that results in local symmetry breaking. We demonstrate this using a suite of spatially resolved and depth-sensitive techniques, including circular photogalvanic effect, inverse spin Hall effect, and multiphoton microscopy, that are supported by first principle calculations. Our work suggests using surface Rashba states in these materials for spintronic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Renormalized site density functional theory for models of ion hydration

Development of accurate statistical mechanics models of molecular liquid systems is a problem of great practical and fundamental importance. Site-density functional theory (SDFT) is one of the promising directions in this area, but its success hinges upon the ability to efficiently reconcile co-existence of two distinct intra- and inter-molecular interaction regimes in a molecular liquid. Renormalized formulation of site-density functional theory (RSDFT), that we have recently developed, resolves this problem by introducing an additional potential field variable that decouples two interaction scales and maps the molecular liquid problem onto the effective simple liquid mixture. This work provides a critical assessment of RSDFT for the hydrated ion system - a problem, which historically has always been one of the most difficult cases for SDFT applications. Using two-site model of water, we perform a comprehensive analysis of hydrated alkali metal and halogen ions, including both structural and free energy based characteristics. The results indicate that RSDFT provides a significant improvement over conventional 3D-RISM implementations, and may prove useful in coarse grained simulations based on two-site solvent models.

Chuev, Gennady N.↗

TOF-SIMS analysis of decoherence sources in superconducting qubits

Superconducting qubits have emerged as a potentially foundational platform technology for addressing complex computational problems deemed intractable with classical computing. Despite recent advances enabling multiqubit designs that exhibit coherence lifetimes on the order of hundreds of μs, material quality and interfacial structures continue to curb device performance. Two-level system defects in the thin superconducting film and adjacent dielectric regions introduce stochastic noise and dissipate electromagnetic energy at the cryogenic operating temperatures. In this study, we utilize time-of-flight secondary ion mass spectrometry to understand the role specific fabrication procedures play in introducing such dissipation mechanisms in these complex systems. We interrogated Nb thin films and transmon qubit structures fabricated through slight modifications in the processing and vacuum conditions. We find that when the Nb film is sputtered onto the Si substrate, oxide and silicide regions are generated at various interfaces. We also observe that impurity species, such as niobium hydrides and carbides, are incorporated within the niobium layer during the subsequent lithographic patterning steps. The formation of these resistive compounds likely impacts the superconducting properties of the Nb thin film. Additionally, we observe the presence of halogen species distributed throughout the patterned thin films. We conclude by hypothesizing the source of such impurities in these structures in an effort to intelligently fabricate superconducting qubits and extend coherence times moving forward.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of a super-tetrahedral cluster of acetonitrile-solvated dodecaborate dianion via dihydrogen bonding

We launched a combined negative ion photoelectron spectroscopy and multiscale theoretical investigation on the geometric and electronic structures of a series of acetonitrile-solvated dodecaborate clusters, i.e., B 12 H 12 2- ·nCH 3 CN (n = 1–4). The electron binding energies of B 12 H 12 2- ·nCH 3 CN are observed to increase with cluster size, suggesting their enhanced electronic stability. B3LYP-D3(BJ)/ma-def2-TZVP geometry optimizations indicate each acetonitrile molecule binds to B 12 H 12 2- via a threefold dihydrogen bond (DHB) B3–H3 ⋮⋮⋮ H3C–CN unit, in which three adjacent nucleophilic H atoms in B 12 H 12 2- interact with the three methyl hydrogens of acetonitrile. The structural evolution from n = 1 to 4 can be rationalized by the surface charge redistributions through the restrained electrostatic potential analysis. Notably, a super-tetrahedral cluster of B 12 H 12 2- solvated by four acetonitrile molecules with 12 DHBs is observed. The post-Hartree–Fock domain-based local pair natural orbital- coupled cluster singles, doubles, and perturbative triples [DLPNO-CCSD(T)] calculated vertical detachment energies agree well with the experimental measurements, confirming the identified isomers as the most stable ones. Furthermore, the nature and strength of the intermolecular interactions between B 12 H 12 2- and CH 3 CN are revealed by the quantum theory of atoms-in-molecules and the energy decomposition analysis. Ab initio molecular dynamics simulations are conducted at various temperatures to reveal the great kinetic and thermodynamic stabilities of the selected B 12 H 12 2- ·CH 3 CN cluster. The binding motif in B 12 H 12 2- ·CH 3 CN is largely retained for the whole halogenated series B 12 X 12 2- ·CH 3 CN (X = F–I). This study provides a molecular-level understanding of structural evolution for acetonitrile-solvated dodecaborate clusters and a fresh view by examining acetonitrile as a real hydrogen bond (HB) donor to form strong HB interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Excited electronic states of Na 2 and K 2 : The potential for long-lived “reservoir” states leading to collision induced population inversions

Potential energy curves (PECs) for the spin-free (ΛS) and spin–orbit (Ω) states associated with the four lowest-lying dissociation channels of Na 2 and K 2 were calculated at the SA-CASSCF/SO-CASPT2/aug-cc-pwCVQZ-DK level. The PECs of Na 2 were consistent with the experimental data and with the FS-CCSD (2,0) calculations, reproducing the double-well and the “shelf” character for some of the potentials of the excited states. For K 2 , the PECs behaved in a similar way and the spectroscopic parameters for the ground and the excited states are in good agreement with the available experimental values. The dissociation energy of K 2 was predicted to be D e = 4454 cm −1 , within an agreement of 5 cm −1 with the experiments. For Na 2 , D e = 5789 cm −1 compared to the experimental value of 6022 cm −1 . The inclusion of spin–orbit coupling effects resulted in avoided crossings, which affect the PECs. Spin–orbit changes the predicted curves for some excited Ω states arising from ΛS states that overlap each other, affecting their associated vibrational frequencies and bond distances. Here, the current studies of the low-lying states in K 2 reveal a similar structure to those of Na 2 , which suggests the accessibility of long-lived energy storing reservoir states and possible population inversions in K 2 following prior experimental work on the reaction of halogen atoms with Na 3 to produce excited states of Na 2 .

Ab-initio methods↗

Biocatalytic control of site-selectivity and chain length-selectivity in radical amino acid halogenases

Biocatalytic C–H activation has the potential to merge enzymatic and synthetic strategies for bond formation. Fe II /αKG-dependent halogenases are particularly distinguished for their ability both to control selective C–H activation as well as to direct group transfer of a bound anion along a reaction axis separate from oxygen rebound, enabling the development of new transformations. In this context, we elucidate the basis for the selectivity of enzymes that perform selective halogenation to yield 4-Cl-lysine (BesD), 5-Cl-lysine (HalB), and 4-Cl-ornithine (HalD), allowing us to probe how site-selectivity and chain length selectivity are achieved. We now report the crystal structure of the HalB and HalD, revealing the key role of the substrate-binding lid in positioning the substrate for C 4 vs C 5 chlorination and recognition of lysine vs ornithine. Targeted engineering of the substrate-binding lid further demonstrates that these selectivities can be altered or switched, showcasing the potential to develop halogenases for biocatalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Manipulation of Dirac Fermions in Nanochain-Structured Graphene

Graphene has afforded an ideal 2D platform for investigating a rich and fascinating behavior of Dirac fermions. Here, we develop a theoretical mechanism for manipulating the Dirac fermions in graphene, such as from type-I to type-II and type-III, by a top-down nanopatterning approach. We demonstrate that by selective chemical adsorption to pattern the 2D graphene into coupled 1D armchair chains (ACs), the intrinsic isotropic upright Dirac cone becomes anisotropic and strongly tilted. Based on model analyses and first-principles calculations, we show that both the shape and tilt of Dirac cone can be tuned by the species of chemisorption, e.g., halogen vs hydrogen, which modifies the strength of inter-AC coupling. Furthermore, the topological edge states and transport properties of the engineered Dirac fermions are investigated. Our work sheds lights on understanding the Dirac fermions in a nanopatterned graphene platform, and provides guidance for designing nanostructures with novel functionality.

Physics↗

The stability of Cl-, Br-, and I-passivated Si(100)-(2 × 1) in ambient environments for atomically-precise pattern preservation

Abstract Atomic precision advanced manufacturing (APAM) leverages the highly reactive nature of Si dangling bonds relative to H- or Cl-passivated Si to selectively adsorb precursor molecules into lithographically defined areas with sub-nanometer resolution. Due to the high reactivity of dangling bonds, this process is confined to ultra-high vacuum (UHV) environments, which currently limits its commercialization and broad-based appeal. In this work, we explore the use of halogen adatoms to preserve APAM-derived lithographic patterns outside of UHV to enable facile transfer into real-world commercial processes. Specifically, we examine the stability of H-, Cl-, Br-, and I-passivated Si(100) in inert N 2 and ambient environments. Characterization with scanning tunneling microscopy and x-ray photoelectron spectroscopy (XPS) confirmed that each of the fully passivated surfaces were resistant to oxidation in 1 atm of N 2 for up to 44 h. Varying levels of surface degradation and contamination were observed upon exposure to the laboratory ambient environment. Characterization by ex situ XPS after ambient exposures ranging from 15 min to 8 h indicated the Br– and I–passivated Si surfaces were highly resistant to degradation, while Cl–passivated Si showed signs of oxidation within minutes of ambient exposure. As a proof-of-principle demonstration of pattern preservation, a H–passivated Si sample patterned and passivated with independent Cl, Br, I, and bare Si regions was shown to maintain its integrity in all but the bare Si region post-exposure to an N 2 environment. The successful demonstration of the preservation of APAM patterns outside of UHV environments opens new possibilities for transporting atomically-precise devices outside of UHV for integrating with non-UHV processes, such as other chemistries and commercial semiconductor device processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Basis for the ICRP’s updated biokinetic model for systemic astatine

The International Commission on Radiological Protection (ICRP) recently updated its biokinetic models for workers in a series of reports called the OIR (occupational intakes of radionuclides) series. A new biokinetic model for astatine (At), the heaviest member of the halogen family, was adopted in OIR Part 5 (ICRP in press). Occupational intakes of radionuclides: Part 5). Furthermore, this paper provides an overview of available biokinetic data for At; describes the basis for the ICRP's updated model for At; and tabulates dose coefficients for intravenous injection of each of the two longest lived and most important At isotopes, 211 At and 210 At. At-211 (T 1/2 = 7.214 h) is a promising radionuclide for use in targeted α-particle therapy due to several favourable properties including its half-life and the absence of progeny that could deliver significant radiation doses outside the region of α-particle therapy. At-210 (T 1/2 = 8.1 h) is an impurity generated in the production of 211 At in a cyclotron and represents a potential radiation hazard via its long-lived progeny 210 Po (T 1/2 = 138 days). Tissue dose coefficients for injected 210 At and 211 At based on the updated model are shown to differ considerably from values based on the ICRP's previous model for At, particularly for the thyroid, stomach wall, salivary glands, lungs, spleen, and kidneys.

61 RADIATION PROTECTION AND DOSIMETRY↗

Transients using low-high pulsed power in inductively coupled plasmas

Pulsed inductively coupled plasmas (ICPs) are widely deployed in the fabrication of semi-conductor devices. Pulse repetition frequencies (PRFs) of up to tens of kHz are commonly used during plasma etching for the high power densities they generate during the pulse-on period, and for their unique chemistries during the pulse-off period. The use of highly attaching halogen gases produces low electron densities during the pulse-off period, and these low density can result in instabilities, E-H transitions and ignition delays when applying power on the next pulse. To mitigate these possibilities, a low-level power environment could be maintained during “pulse-off” to moderate the minimum plasma density, therefore reducing ignition delays and enhancing plasma stability. In this work, ICPs sustained by 5 kHz pulsed power using Ar/Cl 2 mixtures at 20 mTorr were computationally investigated. For these conditions, the computed electron temperature (T e ) reaches a quasi-steady state during both the high- and low-power excitation. The model predicts that within the electromagnetic skin-depth, T e spikes to a high value during a low-to-high power modulation, and to a low value during a high-to-low power modulation. At the same time, a few cm above the substrate, there is little modulation in T e , as electron power convected from the skin depth disperses in traversing the reactor. Finally, the positive and negative spikes, and convection of transients across the reactors, are functions of power ramping time and gas mixtures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterizing particle-like charge-migration dynamics with high-order harmonic sideband spectroscopy

Here, we introduce high-order harmonic sideband spectroscopy and show that it can be a robust probe of charge migration (CM) in a halogenated carbon-chain molecule. We simulate both the CM and high-order harmonic generation (HHG) dynamics using ab initio time-dependent density-functional theory. We find that CM dynamics initiated along the molecular backbone induces sidebands in the HHG spectrum driven by a delayed laser pulse that is polarized perpendicular to the molecular axis. Monitoring the spectrum as either the HHG laser frequency or the relative delay is scanned allows for the extraction of detailed information about the time-domain characteristics of the CM process.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electronic structure of chromium trihalides beyond density functional theory

In this work, we explore the electronic band structure of freestanding monolayers of chromium trihalides Cr X 3 , X = Cl, Br, I, within an advanced ab initio theoretical approach based on the use of Green's function functionals. We compare the local density approximation with the quasiparticle self-consistent GW (QS GW ) approximation and its self-consistent extension ( QS G W ^ ) by solving the particle-hole ladder Bethe-Salpeter equations to improve the effective interaction W . We show that, at all levels of theory, the valence band consistently changes shape in the sequence Cl → Br → I , and the valence band maximum shifts from the M point to the Γ point. By analyzing the dynamic and momentum-dependent self-energy, we show that QS G W ^ adds to the localization of the systems in comparison with QS GW , thereby leading to a narrower band and reduced amount of halogens in the valence band manifold. Further analysis shows that X = Cl is most strongly correlated, and X = I is least correlated (most bandlike) as the hybridization between Cr d and X p enhances in the direction Cl → Br → I . For CrBr 3 and CrI 3 , we observe remarkable differences between the QS GW and QS G W ^ valence band structures, while their eigenfunctions are very similar. We show that weak perturbations, like moderate strain, weak changes to the d - p hybridization, and adding small U , can flip the valence band structures between these two solutions in these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strongly anisotropic electronic and magnetic structures in oxide dichlorides RuOCl 2 and OsOCl 2

The van der Waals oxide dichlorides MOX 2 (M=V, Ta, Nb, Ru, and Os; X=halogen element), with different electronic densities, are attracting considerable attention. Ferroelectricity, spin-singlet formation, and orbital-selective Peierls phases were reported in this family with d 1 or d 2 electronic configurations, all believed to be caused by the strongly anisotropic electronic orbital degree of freedom. Here, using density functional theory and density matrix renormalization group methods, we investigate the electronic and magnetic properties of RuOCl 2 and OsOCl 2 with d 4 electronic configurations. Different from a previous study using VOI 2 with d 1 configuration, these systems with 4d4 or 5d4 do not exhibit a ferroelectric instability along the a axis. Due to the fully occupied dxy orbital in RuOCl 2 and OsOCl 2 , the Peierls instability distortion disappears along the b axis, leading to an undistorted Immm phase (No. 71). Furthermore, we observe strongly anisotropic electronic and magnetic structures along the a axis. For this reason, the materials of our focus can be regarded as “effective one-dimensional” systems even when they apparently have a dominant two-dimensional lattice geometry. The large crystal-field splitting energy (between dxz/yz and dxy orbitals) and large hopping between nearest-neighbor Ru and Os atoms suppresses the J = 0 singlet state in MOCl 2 (M=Ru or Os) with electronic density n = 4, resulting in a spin-1 system. Moreover, we find staggered antiferromagnetic order with π wave vector along the M-O chain direction (a axis) while the magnetic coupling along the b axis is weak. Based on Wannier functions from first-principles calculations, we calculated the relevant hopping amplitudes and crystal-field splitting energies of the t 2g orbitals for the Os atoms to construct a multiorbital Hubbard model for the M-O chains. Staggered AFM with ↑|-|↓-↑|-|↓ spin structure dominates in our density matrix renormalization group calculations, in agreement with density functional theory calculations. Our results for RuOCl 2 and OsOCl 2 provide guidance to experimentalists and theorists working on this interesting family of oxide dichlorides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗