Search NASA⌕ Search

SEARCH · Search NASA

Results for “Integral Benchmarks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Foams in Hohlraums

Foam materials are starting to find application in laser-heated hohlraums used to drive inertial confinement fusion (ICF) implosions. The disparate scales of the solid foam elements (nm) compared to the typical problem scale (mm) make it expensive to resolve the individual foam elements in hydrodynamic calculations. In this project we developed two new models for treating foam materials – a 3D hydrodynamic model that treats the foam as bits of pre-expanded solid material separated by voids, and a subgrid model that captures the essential physics of laser-heated foams without requiring resolution of the individual solid elements. We also explored the microphysics of the transition from interpenetrating kinetic behavior to fully-collisional fluid-like behavior during the early time heating and expansion of foam elements through a combination of single-fluid and multi-fluid hydrodynamics calculations and particle-in-cell calculations. The model was benchmarked against these calculations and against experimental data on laser-heated chemical and additive-manufactured (AM) foams. Since there was no existing data on laser-heated AM foams, we performed the first experiments on such foams at the Jupiter Laser Facility. Samples of three different types of printed AM foams were heated using a single 0.5 micron laser. The foam densities ranged from 10 to 100 mg/cc (supercritical for 0.5 micron light). We measured the backscattered light (power and spectrum), the transmitted light, and the time-integrated temperature of the foam samples. This benchmarked subgrid foam model is a new capability that should allow routine calculation of ICF designs using foam elements, potentially opening up a new design space.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Jupiter: A Proposed Benchmark for Lead Void Worth with Plutonium

In the summer of 2017, a series of measurements were performed at the National Criticality Experiments Research Center (NCERC) in collaboration with the Japanese Atomic Energy Agency (JAEA) to measure the reactivity worth of voids in an array of lead and plutonium. This experiment, called Jupiter, measured multiple configurations of an array of aluminum boxes containing plutonium, aluminum, and lead plates. For some configurations, a selection of the lead interstitial plates were swapped with aluminum spacer frames to create “voids” in the lead interstitial material. Comparing the excess reactivity of the systems provides an empirical value of the lead void reactivity worth. These measurements were part of a larger collaboration to measure lead void reactivity worth with multiple nuclear material types and enrichments. This included other measurement series with both highly-enriched uranium (HEU), and a mixture of HEU and natural uranium to simulate low-enriched uranium (LEU). These data sets will be useful to the JAEA for a potential lead-bismuth cooled accelerator driven system. Additionally, there are not very many benchmarks in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) handbook sensitive to lead cross sections. Given that lead is widely used as a radiation shield and is part of new reactor designs, having more benchmarks in the ICSBEP handbook to better support cross section validation is important. Additional integral experiments could also aid in determining whether improvements have been made in new lead cross section evaluations. A benchmark evaluation for this experiment is being proposed in order to help fulfill these needs. Such evaluations contain both measured data, results from detailed transport code models, and analyses of the uncertainties associated with each. Examples of these uncertainties include the uncertainty in the measured excess reactivity, the composition of components, or their positioning within the model. This means it is easier to make comparisons between the measured and simulated data and better understand where improvements can be made to nuclear data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

DIRECT SPECTRUM OF THE BENCHMARK T DWARF HD 19467 B

HD 19467 B is presently the only directly imaged T dwarf companion known to induce a measurable Doppler acceleration around a solar-type star. We present spectroscopy measurements of this important benchmark object taken with the Project 1640 integral field unit at Palomar Observatory. Our high-contrast R ≈ 30 observations obtained simultaneously across the JH bands confirm the cold nature of the companion as reported from the discovery article and determine its spectral type for the first time. Fitting the measured spectral energy distribution to SpeX/IRTF T dwarf standards and synthetic spectra from BT-Settl atmospheric models, we find that HD 19467 B is a T5.5 ± 1 dwarf with effective temperature T{sub eff}=978{sub −43}{sup +20} K. Our observations reveal significant methane absorption affirming its substellar nature. HD 19467 B shows promise to become the first T dwarf that simultaneously reveals its mass, age, and metallicity independent from the spectrum of light that it emits.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Multi-scale Material Parameter Identification Using LS-DYNA® and LS-OPT®

Ever-tightening regulations on fuel economy and carbon emissions demand continual innovation in finding ways for reducing vehicle mass. Classical methods for computational mass reduction include sizing, shape and topology optimization. One of the few remaining options for weight reduction can be found in materials engineering and material design optimization. Apart from considering different types of materials by adding material diversity, an appealing option in automotive design is to engineer steel alloys for the purpose of reducing thickness while retaining sufficient strength and ductility required for durability and safety. Such a project was proposed and is currently being executed under the auspices of the United States Automotive Materials Partnership (USAMP) funded by the Department of Energy. Under this program, new steel alloys (Third Generation Advanced High Strength Steel or 3GAHSS) are being designed, tested and integrated with the remaining design variables of a benchmark vehicle Finite Element model. In this project the principal phases identified are (i) material identification, (ii) formability optimization and (iii) multi-disciplinary vehicle optimization. This paper serves as an introduction to the LS-OPT methodology and therefore mainly focuses on the first phase, namely an approach to integrate material identification using material models of different length scales. For this purpose, a multi-scale material identification strategy, consisting of a Crystal Plasticity (CP) material model and a Homogenized State Variable (SV) model, is discussed and demonstrated. The paper concludes with proposals for integrating the multi-scale methodology into the overall vehicle design.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Conjugation-based genome engineering enables rapid prototyping and bioproduction in non-model bacteria

Abstract Non-model bacteria offer unique metabolic capabilities for sustainable bioproduction, yet their limited genetic accessibility hinders systematic strain development. Here we present conjugation-based serine recombinase-assisted genome engineering (cSAGE), a broad-host-range platform that enables predictable, iterative genomic integration in transformation-resistant bacteria. cSAGE combines conjugative DNA delivery, standardized low-copy vectors, orthogonal recombinases, and modular genetic parts to support rapid pathway assembly and cross-host benchmarking. Using purple nonsulfur bacteria as a testbed, we integrate promoter engineering, multi-payload genome modification, and genome-scale metabolic modeling to empirically evaluate host-dependent pathway performance. Applying this workflow, we identify strain-specific differences in photosynthetic conversion of lignin-derived p -coumarate to the thermoplastic precursor p -vinylphenol. By enabling genome engineering and functional comparison across diverse bacteria using a single plasmid system, cSAGE provides a general framework for non-model strain prototyping and biotransformation discovery.

Guzman, Michael S. [Department of Chemical Enginee↗
DOE OSTI2016

Creating an Energy Intelligent Campus: Data Integration Challenges and Solutions at a Large Research Campus

Rich, well-organized building performance and energy consumption data enable a host of analytic capabilities for building owners and operators, from basic energy benchmarking to detailed fault detection and system optimization. Unfortunately, data integration for building control systems is challenging and costly in any setting. Large portfolios of buildings--campuses, cities, and corporate portfolios--experience these integration challenges most acutely. These large portfolios often have a wide array of control systems, including multiple vendors and nonstandard communication protocols. They typically have complex information technology (IT) networks and cybersecurity requirements and may integrate distributed energy resources into their infrastructure. Although the challenges are significant, the integration of control system data has the potential to provide proportionally greater value for these organizations through portfolio-scale analytics, comprehensive demand management, and asset performance visibility. As a large research campus, the National Renewable Energy Laboratory (NREL) experiences significant data integration challenges. To meet them, NREL has developed an architecture for effective data collection, integration, and analysis, providing a comprehensive view of data integration based on functional layers. The architecture is being evaluated on the NREL campus through deployment of three pilot implementations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Rethinking agrivoltaic incentive programs: A science-based approach to encourage practical design solutions

Agrivoltaic systems are promising solutions to address global food and energy challenges by combining agriculture and solar photovoltaics. However, the lack of appropriate regulations to define and guide their implementation constrains the growth of agrivoltaic systems in the U.S. This study uses a shading and radiation tool to evaluate an existing agrivoltaic incentive program that defines agrivoltaic designs based on shading reduction limits and panel height requirements. Our analysis indicates that structuring policy requirements around shading, and not light availability, may lead to an underestimation of crop suitability by neglecting diffuse radiation. Furthermore, we show that agrivoltaic systems can avoid increasing panel height if policy acknowledges use-case scenarios where farming only occurs between rows. In light of these insights, this study proposes two key policy recommendations: (1) benchmark crop suitability based on daily light integral (DLI) requirements for a shade-intolerant crop selected to represent a prevalent crop in the region, and (2) include an incentive scenario where agriculture is only required between rows. Furthermore, these two recommendations can potentially incentivize designs that are practical and closer in cost to conventional solar farms, thereby accelerating the adoption of cost-effective agrivoltaic systems.

14 SOLAR ENERGY↗
DOE OSTI2019

A multispecies, multifluid model for laser–induced counterstreaming plasma simulations

The interpenetration of counterstreaming plasmas is a critical phenomenon in several application areas, such as astrophysical flows, design of controlled fusion devices, and laser–induced plasma experiments. Multispecies “single-fluid” codes are unable to model this phenomenon due to the single velocity representation for all the species/fluids. Kinetic codes, though capable of modeling interpenetration, are computationally prohibitive for at-scale simulations. Here, we introduce a multifluid model that solves the fluid equations for each ion fluid or stream. This allows distinct flows that interact with each other through electrostatic and collisional forces. We observe and describe our code, EUCLID, that uses a conservative finite-difference formulation to discretize the governing equations in space. The 5th-order Monotonicity-Preserving WENO scheme is used for the upwind approximation of the hyperbolic flux, and the explicit 4th-order Runge–Kutta scheme is used for time integration. The code is verified for several benchmark cases and manufactured solutions. We simulate one- and two-dimensional interactions of counterstreaming plasmas in vacuum as well as in the presence of gas fill, where the setups are representative of laser-induced plasma experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Materials Graph Library (MatGL), an open-source graph deep learning library for materials science and chemistry

Graph deep learning models, which incorporate a natural inductive bias for atomic structures, are of immense interest in materials science and chemistry. Here, we introduce the Materials Graph Library (MatGL), an open-source graph deep learning library for materials science and chemistry. Built on top of the popular Deep Graph Library (DGL) and Python Materials Genomics (Pymatgen) packages, MatGL is designed to be an extensible “batteries-included” library for developing advanced model architectures for materials property predictions and interatomic potentials. At present, MatGL has efficient implementations for both invariant and equivariant graph deep learning models, including the Materials 3-body Graph Network (M3GNet), MatErials Graph Network (MEGNet), Crystal Hamiltonian Graph Network (CHGNet), TensorNet and SO3Net architectures. MatGL also provides several pre-trained foundation potentials (FPs) with coverage of the entire periodic table, and property prediction models for out-of-box usage, benchmarking and fine-tuning. Finally, MatGL integrates with PyTorch Lightning to enable efficient model training.

chemistry↗
DOE OSTI2021

Critical adjustment of land mitigation pathways for assessing countries' climate progress

Collective progress towards the Paris Agreement’s temperature targets will be assessed by the Agreement’s Global Stocktake process. Global emission pathways by Integrated Assessment Models (IAMs) are a likely benchmark against which aggregated countries’ greenhouse gas mitigation pledges will be assessed. However, this approach requires comparability, which is currently hampered by a 5 GtCO2yr-1 mismatch between the estimated global land anthropogenic flux of IAMs and countries’ GHG inventories (GHGIs) for 2005-2015. We show that this gap is mostly the result of differences in how the anthropogenic forest sink is defined. Countries define managed forest more broadly than IAMs, and on this larger area typically consider anthropogenic also fluxes due to human-induced environmental change, which IAMs do not include their pathways. Using five IAMs and a dynamic global vegetation model (DGVM), we present and apply a novel method that adjusts IAM results to the countries’ definition, closing the gap with GHGIs at global and regional scale. When expressed in a way compatible with GHGIs, adjusted 1.5°C and well-below 2°C pathways have a cumulative CO2 balance until carbon neutrality that is 110–176 GtCO2 lower than the original IAMs pathways. The use of these country-compatible emission pathways under the Global Stocktake would therefore be essential for an accurate assessment of the collective progress towards the Paris Agreement’s climate goals.

Grassi, Giacomo↗
DOE OSTI2020

Quantum Monte Carlo benchmarking of large noncovalent complexes in the L7 benchmark set

We have used diffusion Monte Carlo (DMC) to perform calculations on the L7 benchmark set. DMC is a stochastic numerical integration scheme in real-space and part of a larger set of quantum Monte Carlo methods. The L7 set was designed to test the ability of electronic structure methods to include dispersive interactions. While the agreement between DMC and quantum-chemical state-of-the-art methods is excellent for some of the structures, there are significant differences in others. In contrast to wavefunction-based quantum chemical methods, DMC is a first-principle many-body method with the many-body wavefunction evolving in real space. It includes explicitly all electron–electron interactions and is relatively insensitive to the size of the basis set.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Influence of the drive design on ablation front hydrodynamic instability growth in a capsule implosion at the National Ignition Facility

A critical aspect of inertial confinement fusion experiments lies in the control of ablation front instabilities during the implosion process. The growth of Rayleigh–Taylor and Richtmyer–Meshkov instabilities, seeded by target defects, can significantly degrade the performance of the implosion. Here, this study explores the influence of drive design on ablation front stability using the hydro-growth radiography platform at the National Ignition Facility. This platform allows the measurement of the ablation front hydrodynamic instability growth. Because these measurements are restricted to early convergence, their primary role is to constrain the initial instability growth and benchmark the simulations used to infer shell integrity and performance at peak velocity and ignition. Three ignition designs, Hybrid-E (HyE), SQ-n (“S” for scaling and “Q” for quality), and High temperature, High thickness (HiT) were analyzed. The results demonstrated a high dependence of the growth factor on the choice of design, capsule scale as well as the hohlraum conditions, mainly the radiative temperature and the gold M-band emission. HyE and SQ-n display a similar growth factor range, but their evolution is different due to the design differences in hohlraum conditions. HiT has the lowest growth factor of the studied designs, which is a result of a higher radiative temperature. These results highlight the importance of design choices in controlling instability dynamics. These insights inform future drive design strategies to enhance stability and efficiency in fusion ignition experiments.

Physics↗
DOE OSTI2019

CIAE-ANL CRADA for SFR SAFETY ANALYSIS: Final CRADA Report

The purpose of this project is joint verification and validation of system analysis code capabilities for Sodium-cooled Fast Reactor (SFR) design and licensing. As the researchers and code developers at the Argonne National Laboratory (ANL) and China Institute of Atomic Energy (CIAE) independently build their own SFR system analysis capabilities, this collaboration facilitated exchange of information on, and evaluation of alternative approaches for, modeling the key phenomena (such as decay heat removal and natural circulation) and the safety-related components (such as pumps, heat exchangers, and outlet plenum) common in SFR systems. The analysis at ANL and CIAE also applied their respective computational capabilities and methods (in SAS4A/SASSYS-1 computer code at ANL and FR-Sdaso computer code at CIAE) on jointly identified benchmark problems for verification, and publicly available integral tests for validation, of their results. ANL team also shared the expertise on the established software quality assurance practices and the techniques for component reliability estimates to support probabilistic risk assessments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2026

Integrated Energy-Water Data for Cross-Sector Resilience

This white paper focuses on the “energy-for-water” domain, addressing the urgent need for integrated, empirical data to support regional management, benchmarking, and research on improving efficiency and developing technologies for water and wastewater management systems. The costs and energy required for the supply, treatment, and distribution of water and wastewater lack a standard data collection mechanism and centralized database or storage infrastructure, limiting data-driven decision-making across interdependent infrastructure systems.

42 ENGINEERING↗
NASA NTRS1993

Fuel injector: Air swirl characterization aerothermal modeling, phase 2, volume 1

A well integrated experimental/analytical investigation was conducted to provide benchmark quality relevant to a prefilming type airblast fuel nozzle and its interaction with the combustor dome air swirler. The experimental investigation included a systematic study of both single-phase flows that involved single and twin co-axial jets with and without swirl. A two-component Phase Doppler Particle Analyzer (PDPA) was used to document the interaction of single and co-axial air jets with glass beads that simulate nonevaporating spray and simultaneously avoid the complexities associated with fuel atomization processes and attendant issues about the specification of relevant boundary conditions. The interaction of jets with methanol spray produced by practical airblast nozzle was also documented in the spatial domain of practical interest. Model assessment activities included the use of three turbulence models (k-epsilon, algebraic second moment (ASM), and differential second moment (DSM)) for the carrier phase, deterministic or stochastic Lagrangian treatment of the dispersed phase, and advanced numerical schemes. Although qualitatively good comparison with data was obtained for most of the cases investigated, the model deficiencies in regard to modeled dissipation rate transport equation, single length scale, pressure-strain correlation, and other critical closure issues need to be resolved before one can achieve the degree of accuracy required to analytically design combustion systems.

Nikjooy, M.↗
NASA NTRS1993

Fuel Injector: Air swirl characterization aerothermal modeling, phase 2, volume 2

A well integrated experimental/analytical investigation was conducted to provide benchmark quality data relevant to prefilming type airblast fuel nozzle and its interaction with combustor dome air swirler. The experimental investigation included a systematic study of both single-phase flows that involved single and twin co-axial jets with and without swirl. A two-component Phase Doppler Particle Analyzer (PDPA) equipment was used to document the interaction of single and co-axial air jets with glass beads that simulate nonevaporating spray and simultaneously avoid the complexities associated with fuel atomization processes and attendant issues about the specification of relevant boundary conditions. The interaction of jets with methanol spray produced by practical airblast nozzle was also documented in the spatial domain of practical interest. Model assessment activities included the use of three turbulence models (k-epsilon, algebraic second moment (ASM) and differential second moment (DSM)) for the carrier phase, deterministic or stochastic Lagrangian treatment of the dispersed phase, and advanced numerical schemes. Although qualitatively good comparison with data was obtained for most of the cases investigated, the model deficiencies in regard to modeled dissipation rate transport equation, single length scale, pressure-strain correlation, and other critical closure issues need to be resolved before one can achieve the degree of accuracy required to analytically design combustion systems.

Nikjooy, M.↗
DOE OSTI2022

4-Dimensional Trackers

4-dimensional (4D) trackers with ultra fast timing (10-30 ps) and very fine spatial resolution (O(few $\mu$m)) represent a new avenue in the development of silicon trackers, enabling new physics capabilities beyond the reach of the existing tracking detectors. This paper reviews the impact of integrating 4D tracking capabilities on several physics benchmarks both in potential upgrades of the HL-LHC experiments and in several detectors at future colliders, and summarizes the currently available sensor technologies as well as electronics, along with their limitations and directions for R$\&$D.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗