Search NASA⌕ Search

SEARCH · Search NASA

Results for “Laminates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Interface Evolutionand Long-Term Performance of NegativeCarbon Fiber Structural Electrodes

Abstract Laminated structural batteries present a transformative solution to reducing weight constraints in electric vehicles. These structural batteries are based on a multifunctional material that incorporates an energy storage function within a carbon fiber-reinforced polymer. Despite the potential of this technology, the intricate morphology of fiber–matrix or electrode–electrolyte interfaces and the impact of long-term cycling at low current rates (C-rates) on these interfaces remain insufficiently understood. This study addresses these critical knowledge gaps by examining the influence of matrix composition on the long-term electrochemical performance of structural battery electrodes and exploring advanced techniques to investigate carbon fiber–matrix interfaces. Localized imaging and X-ray scattering techniques were used to characterize morphological changes at the electrode–electrolyte interfaces by analyzing negative structural electrodes. The findings revealed that the matrix composition influences long-term electrochemical behavior and fiber–matrix interface formation. While the intrinsic properties of carbon fibers largely remain unaffected by long-term cycling, cycling promotes debonding at fiber–matrix interfaces. Nonetheless, residual regions of adhesion persist, underscoring the potential for preserving multifunctionality even under prolonged cycling conditions. These insights advance the understanding of interface dynamics, which is critical for optimizing structural battery technologies.

Chemistry↗
DOE OSTI2023

Integrated Ion-Exchange Membrane Resin Wafer Assemblies for Aromatic Organic Acid Separations Using Electrodeionization

Aromatic acids, such as p-coumaric acid, are valuable chemical intermediates that are used in the specialty chemical industries because they are precursors to phenylpropanoid compounds. The separation of p-coumaric acid from fermentation broths is a critical step in the biochemical production process and more broadly the circular carbon economy. Electrodeionization (EDI) has been applied toward separations of low-carbon chain acids, but purifying p-coumaric acid has been challenging due to fouling and irreversible binding with ion-exchange membranes and resins. Here, we report a new membrane wafer assembly (MWA) consisting of laminated ion exchange membranes to porous ionomer-binder resin wafers for EDI. The MWAs in an EDI stack showed a 7-fold increase in p-coumaric acid capture while also using 70% less specific energy consumption when benchmarked against state-of-the-art resin wafer EDI modules. The more efficient p-coumaric acid recovery was ascribed to (i) the 38% reduction in interfacial transport resistance between the membrane and resin wafer and (ii) using imidazolium anion exchange membranes and ionomer binders in the MWA. MD simulations revealed enhanced transport rates for p-coumarate in imidazolium ionomers through π–π interactions. As a result, adopting the new MWA significantly reduced the amount of ion-exchange membranes in EDI and may lead to drastic capital cost savings.

42 ENGINEERING↗
DOE OSTI2019

Collapse of Reacted Fracture Surface Decreases Permeability and Frictional Strength

Abstract Geochemical and geomechanical perturbations of the subsurface caused by the injection of fluids present risks of leakage and seismicity. This study investigated how acidic fluid flow affects hydraulic and frictional properties of fractures using experiments with 3.8‐cm‐long specimens of Eagle Ford shale, a laminated shale with carbonate‐rich strata. In low‐pressure flow cells, one set of samples was exposed to acidic brine and another set was exposed to neutral brine. X‐ray computed tomography and energy‐dispersive X‐ray spectroscopy revealed that samples exposed to acidic brine were calcite‐depleted and had developed a porous altered layer, while the other set showed no evidence of alteration. After reaction, samples were compressed and sheared in a triaxial cell that supplied normal stress and differential pore pressure at prescribed sliding velocities, independently measuring friction and permeability. During the initial compression, the porous altered layer collapsed into fine particles that filled the fracture. This effectively impeded flow and sealed the fracture, resulting in fracture permeability to decrease 1 to 2 orders of magnitude relative to the unaltered fractures. This is a favorable outcome in subsurface applications where the goal is to reduce leakage risks. However, during shear the reacted fracture had lower frictional strength because the fine‐grained particles in the collapsed layer prevented the formation of interlocking microasperities. Therefore, coupled geochemical and geomechanical processes that could favorably seal fractures could also increase the likelihood of induced seismicity. These findings have important implications for geological carbon sequestration, pressurized fluid energy storage, geothermal energy, and other subsurface technologies.

58 GEOSCIENCES↗
DOE OSTI2021

Characterizing the Effect of Capillary Heterogeneity on Multiphase Flow Pulsation in an Intermediate–Scale Beadpack Experiment using Time Series Clustering and Frequency Analysis

An intermediate-scale beadpack drainage experiment was conducted to investigate how simple layered lamination heterogeneity affects CO 2 flow. Two simple layers of capillary barriers are manually packed in the tank and slow drainage was carried out using analog fluids to mimic the capillary- and gravity-dominated CO 2 upward migration process in deep saline aquifers. Nonwetting phase saturation time series clustering analysis and frequency analysis have been conducted on the experimental data. Additionally, modified invasion percolation numerical simulations were done on a digital model of the beadpack to compare to experimental results. Results show that capillary barriers can lead to strong pulsation behavior, which in turn can cause unexpected early breaching through other barriers. The inlet pressure is found to be able to respond to saturation changes in far regions of the domain, indicating that the wetting phase can transmit pressure changes from the other phase. Although static simulations were not able to capture all the dynamic behavior observed in the experiment, Monte Carlo composite simulation results combining many different realizations can better illustrate how the nonwetting phase will behave in the heterogeneous domain. Furthermore, our results suggest the need for CO 2 storage site selection with preference given to aquifers with more capillary barriers with finer grain sizes to avoid flow pulsation and to retard plume upward migration.

58 GEOSCIENCES↗
DOE OSTI2026

Amapari Marker Band Metal‐Enrichments: Potential Mechanisms and Implications for Surface and Subsurface Water and Weathering in Gale Crater

NASA's Curiosity rover is exploring a 5 km tall sedimentary mound that is hypothesized to record the transition from a warm and wet (phyllosilicate-rich) to a cold and drier (sulfate-rich) Mars. Evidence of magnesium sulfate-bearing rock has shown that Curiosity has crossed through this phyllosilicate-sulfate transition. Recently, Curiosity arrived at the Amapari Marker Band, a darker, indurated unit that can be traced laterally for tens of kilometers in orbiter images. Here, Curiosity found evidence for a very broad lake, and bedforms interpreted as wave-ripple laminated sedimentary rock that likely was deposited in shallow water in the explored location, before becoming a deeper lake. These rocks are enriched in Fe, Mn, and Zn which has major implications for groundwater paleohydrology in Gale crater. Three formation hypotheses are considered: concretion formation during early diagenetic alteration of shallow lake sediments, laterization or leaching of the sediments, and addition of Fe, Mn, and Zn by a mildly acidic and reducing groundwater interacting with a redox and/or pH front in a stratified lake. The preferred interpretation of the metal enrichments within the Amapari Marker band sedimentary rocks is that they formed in a shallow water environment at a redox and/or pH front within the ripple unit, which drove precipitation and concentration of metals. If the enrichments are due to groundwater alteration, these processes could link subsurface and surface environments. Water and the presence of high amounts of redox sensitive elements and other metals are favorable indicators for habitability.

58 GEOSCIENCES↗
DOE OSTI2020

High permeability sub-nanometre sieve composite MoS 2 membranes

Two-dimensional membranes have gained enormous interest due to their potential to deliver precision filtration of species with performance that can challenge current desalination membrane platforms. Molybdenum disulfide (MoS 2 ) laminar membranes have recently demonstrated superior stability in aqueous environment to their extensively-studied analogs graphene-based membranes; however, challenges such as low ion rejection for high salinity water, low water flux, and low stability over time delay their potential adoption as a viable technology. Here, we report composite laminate multilayer MoS 2 membranes with stacked heterodimensional one- to two-layer-thick porous nanosheets and nanodisks. These membranes have a multimodal porous network structure with tunable surface charge, pore size, and interlayer spacing. In forward osmosis, our membranes reject more than 99% of salts at high salinities and, in reverse osmosis, small-molecule organic dyes and salts are efficiently filtered. Finally, our membranes stably operate for over a month, implying their potential for use in commercial water purification applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Twisted-layer boron nitride ceramic with high deformability and strength

Moiré superlattices formed by twisted stacking in van der Waals materials have emerged as a new platform for exploring the physics of strongly correlated materials and other emergent phenomena. However, there remains a lack of research on the mechanical properties of twisted-layer van der Waals materials, owing to a lack of suitable strategies for making three-dimensional bulk materials. Here we report the successful synthesis of a polycrystalline boron nitride bulk ceramic with high room-temperature deformability and strength. This ceramic, synthesized from an onion-like boron nitride nanoprecursor with conventional spark plasma sintering and hot-pressing sintering, consists of interlocked laminated nanoplates in which parallel laminae are stacked with varying twist angles. The compressive strain of this bulk ceramic can reach 14% before fracture, about one order of magnitude higher compared with traditional ceramics (less than 1% in general), whereas the compressive strength is about six times that of ordinary hexagonal boron nitride layered ceramics. The exceptional mechanical properties are due to a combination of the elevated intrinsic deformability of the twisted layering in the nanoplates and the three-dimensional interlocked architecture that restricts deformation from propagating across individual nanoplates. The advent of this twisted-layer boron nitride bulk ceramic opens a gate to the fabrication of highly deformable bulk ceramics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interface microstructure effects on dynamic failure behavior of layered Cu/Ta microstructures

Abstract Structural metallic materials with interfaces of immiscible materials provide opportunities to design and tailor the microstructures for desired mechanical behavior. Metallic microstructures with plasticity contributors of the FCC and BCC phases show significant promise for damage-tolerant applications due to their enhanced strengths and thermal stability. A fundamental understanding of the dynamic failure behavior is needed to design and tailor these microstructures with desired mechanical responses under extreme environments. This study uses molecular dynamics (MD) simulations to characterize plasticity contributors for various interface microstructures and the damage evolution behavior of FCC/BCC laminate microstructures. This study uses six model Cu/Ta interface systems with different orientation relationships that are as- created, and pre-deformed to understand the modifications in the plasticity contributions and the void nucleation/evolution behavior. The results suggest that pre-existing misfit dislocations and loading orientations (perpendicular to and parallel to the interface) affect the activation of primary and secondary slip systems. The dynamic strengths are observed to correlate with the energy of the interfaces, with the strengths being highest for low-energy interfaces and lowest for high-energy interfaces. However, the presence of pre-deformation of these interface microstructures affects not only the dynamic strength of the microstructures but also the correlation with interface energy.

42 ENGINEERING↗
DOE OSTI2021

A chemical switch enabled autonomous two-stage crosslinking polymeric binder for high performance silicon anodes

Silicon (Si) is a promising high-capacity anode material for high-energy-density lithium-ion batteries. However, the drastic volumetric changes of Si upon lithiation/delithiation hinder the practical use of Si anodes. Although adhesive polymeric binders, such as poly(acrylic acid) (PAA), mitigate this issue, the cycling performance of the fabricated Si anodes is still far from meeting the criteria of practical applications. In this study, we present a novel polymeric binder system for Si anodes consisting of PAA, a chemical switch (ammonia, NH 3 ), and a crosslinker (branched polyethylenimine, PEI). The crosslinking between PAA and PEI is switched off in the slurry, which can then be turned on during electrode drying. Interestingly, the crosslinking reaction consists of two stages: ionic cross-linking (PAA-PEI-i) and covalent crosslinking (PAA-PEI-c) at a higher temperature (e.g., 130 °C). In half-cells, Si anodes fabricated using the PAA-PEI-c binder show a 67% increase in capacity retention compared to PAA anodes over 150 cycles at C/3 rate. The PAA-PEI-c binder also outperforms PAA in full cells. In addition, the chemical switch controlled crosslinking binder system also facilitates the slurry making process by avoiding early crosslinking. This system requires no additional steps compared to the conventional electrode lamination process, showing enormous potential for direct adoption in large-scale manufacturing.

25 ENERGY STORAGE↗
DOE OSTI2023

Mechanistic insights into the conversion of polyalcohols over Brønsted acid sites

Multi-layered plastic (MLP) films provide excellent properties for food packaging; however, because of the complicated chemistry of the hydrophobic substrates and tightly laminated hydrophilic layers, it is challenging to recycle the MLP films. The selective conversion of polar functional groups in hydrophilic layers with a minimal destruction of the carbon backbone of constituted polymers is considered a promising approach to improve the recyclability of MLP films. Here, in this study, we combine computational and experimental studies to investigate the acid-catalyzed conversion of functional groups in polyalcohols, through which we report potential reaction pathways involved in the conversion of ethylene vinyl alcohol (EVOH), a common copolymer used in MLP films as an oxygen barrier. Using 2,4-pentanediol as a model compound, we show that its conversion proceeds primarily through the dehydration of a hydroxyl group via either a stepwise or a concerted mechanism to form an unsaturated alcohol that can be further converted into a conjugated diene or a saturated ketone; this secondary reaction determines the product selectivity. The rate determining intermediates and transition states are identified, and the activation barriers are calculated, in agreement with experimentally observed product selectivities. This study thus provides insights for the selective conversion of EVOH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Intrinsic thermal interfacial resistance measurement in bonded metal–polymer foils

Heat conduction through bonded metal–polymer interfaces often limits the overall heat transfer in electronic packaging, batteries, and heat recovery systems. To design the thermal circuit in such systems, it is essential to measure the thermal interfacial resistance (TIR) across ~1 µm to 100 µm junctions. Previously reported TIR of metal–polymer junctions utilize ASTM E1530-based two-block systems that measure the TIR by applying pressure across the interface through external heating and cooling blocks. Here, we report a novel modification of the ASTM-E1530 technique that employs integrated heaters and sensors to provide an intrinsic TIR measurement of an adhesively bonded metal–polymer junction. We design the measurement technique using finite element simulations to either passively suppress or actively compensate the lateral heat diffusion through the polymer, which can minimize the systematic error to ≲5%. Through proof-of-concept experiments, we report the TIR of metal–polymer interfaces made from DuPont’s Pyralux double-side copper-clad laminates, commonly used in flexible printed circuit boards. Our TIR measurement errors are <10%. We highlight additional sources of errors due to non-idealities in the experiment and discuss possible ways to overcome them. Our measurement technique is also applicable to interfaces that are electrically insulating such as adhesively joined metal–metal junctions and sputter-coated or welded metal–polymer junctions. Altogether, the technique is capable of measuring TIR ≳10 –5 m 2 KW –1 in bonded metal–polymer foils and can be tailored for in situ measurements in flexible electronics, circuit packaging, and other hybrid metal–polymer systems.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Phase mediated dynamics of self-propagating Co/Al nanolaminate reactions

The ignition of sputter deposited nanolaminate foils comprised of alternating Co and Al layers results in rapid, self-propagating formation reactions. The propagating waves present after ignition of 150 nm-thick foils are characterized in movie mode dynamic transmission electron microscopy where these are found to have reaction speeds and wave morphology that vary with bilayer thickness. High speed videography reveals different bilayer thickness-wave character relationships in 750 nm- and 7500 nm-thick Co/Al foils. The reaction speed dependencies on bilayer thickness are calculated for each total thickness by treating the effect of radiation loss as a perturbation from an analytical model described by the difference in the heat of reaction measured in calorimetry and the adiabatic heat of product formation. From this model, an effective activation energy, diffusion constant, and flame temperatures are obtained, which allows for an interpretation of the reaction phase variations with laminate design and their effects on propagating wave morphology.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Radiation effects in Mn+1AXn phases

M n+1 AX n phases exhibit unique laminated atomic structures that result in properties typical of both ceramics and metals. Due to their unusual characteristics, these materials have been proposed for use in a wide variety of industrial applications, including in nuclear reactors—both fission and fusion systems—where they will be exposed to extreme irradiation conditions and high temperatures. Recently, numerous studies have investigated radiation effects on the M n+1 AX n phases, revealing complex behavior—phase transformations, surface modification, and mechanical property changes—induced by ion or neutron irradiation over a range of temperatures. This review summarizes recent experimental and theoretical work on the response of the M n+1 AX n phases to irradiation and discusses the intrinsic controls on the radiation tolerance of these materials. Based on the review of the present body of work, a comprehensive understanding of the mechanisms of irradiation-induced structural modification and defect evolution in M n+1 AX n phases is developed, as well as proposed strategies for designing novel M n+1 AX n phases with enhanced performance under extreme irradiation conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

A new woven composite constitutive model validated by shock wave experiments

In this paper, we present results of plate impact simulations of shock compressed woven glass fiber-reinforced plastic (GRP) performed using the Arbitrary Lagrangian–Eulerian three-dimensional finite element code. A hyperelastic large-strain-based empirical Continuum Damage Mechanics (CDM) formulation is employed to describe damage initiation and growth in the shock-compressed GRP. The model parameters calibration scheme utilizes the Velocity Interferometer System for Any Reflector normal particle velocity measurements at the free surface of the GRP target plates. The impact velocity in the experiments ranged from 8.5 to 418 m/s. The finite element model considered planar 0°/90° bidirectional plies with an individual ply thickness of 0.68 mm, stacked to reach a total laminate thickness of 6.8 mm. The anisotropic elastic strains were estimated from the experimentally determined tetragonal symmetry stiffness matrix for the GRP. The strain-based damage model captures several salient features observed in the measured free surface particle wave profiles, including the shock rise time, onset of Elastic—Elastic Cracking, and the shape of the nonlinear portion of the experimental particle velocity profiles. Furthermore, the CDM model predicts the dominant damage mode to be matrix microcracking due to shear and the associated bulk expansion (bulking) under the global compressive loading in the plate impact configuration.

42 ENGINEERING↗
DOE OSTI2026

Hofstadter butterfly and quantum transport benchmarks in PVA-exfoliated graphene heterostructures

Polymer exposure during van der Waals heterostructure fabrication is widely regarded as compromising the integrity of the electronic system required for hosting emergent quantum physics. This assumption has persisted largely because electronic benchmarking of heterostructures from polymer-exposed graphene has remained limited to only foundational transport metrics, such as mobility and charge inhomogeneity. Here, we challenge this assumption by establishing that graphene heterostructures produced by polyvinyl alcohol (PVA)-assisted exfoliation and encapsulated in hexagonal boron nitride using elevated-temperature lamination satisfy demanding quantum transport benchmarks. Beyond exhibiting ultra-high mobility and ballistic transport, these heterostructures yield quantum scattering times comparable to the best polymer-free devices. Most demanding of all, moiré superlattices from PVA-exposed graphene exhibit Hofstadter butterfly spectra, confirming spatially uniform interlayer coupling across the device area. These results establish that PVA exposure is compatible with low-disorder electronic systems, relaxing the trade-off between scalable fabrication and low-disorder quantum transport. This study motivates further development of polymer-assisted assembly with engineered residue-removal protocols.

36 MATERIALS SCIENCE↗
DOE OSTI2025

High-throughput studies of novel magnetic materials in borides

Borides are a versatile material family with various properties for valuable applications. Conventional magnetism, such as ferromagnetism and antiferromagnetism in borides, have been extensively studied. However, research on unconventional magnetism in borides where quantum effects are dominant is scarce. Here, we implement a high-throughput workflow combining first-principles calculations, materials prediction, and magnetic properties calculations to discover novel magnetism and magnetic materials in borides. Successfully applying the workflow, we report three families of novel magnetic borides, including two families of borides exhibiting quantum magnetism. One is a family of dimerized quantum magnets among YCrB 4 -type borides, which provides a rare platform for studying the spin-gap quantum critical point. The other is a family of altermagnets among FeMo2B 2 -type borides, extending the magnetic orderings exhibited by borides beyond conventional ferromagnetism and antiferromagnetism. We also predict a family of magnetic laminate transition metal borides, known as the MAB phases, in the AlFe 2 B 2 -type family, which provide pure-phase or alloying candidates for studying magnetocaloric materials and the associated magnetic transitions. The workflow is expected to be used in further studies of novel magnetism and magnetic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Glass/glass photovoltaic module reliability and degradation: a review

Glass/glass (G/G) photovoltaic (PV) module construction is quickly rising in popularity due to increased demand for bifacial PV modules, with additional applications for thin-film and building-integrated PV technologies. G/G modules are expected to withstand harsh environmental conditions and extend the installed module lifespan to greater than 30 years compared to conventional glass/backsheet (G/B) modules. With the rapid growth of G/G deployment, understanding the outdoor performance, degradation, and reliability of this PV module construction becomes highly valuable. In this review, we present the history of G/G modules that have existed in the field for the past 20 years, their subsequent reliability issues under different climates, and methods for accelerated testing and characterization of both cells and packaging materials. We highlight some general trends of G/G modules, such as greater degradation when using poly(ethylene-co-vinyl acetate) (EVA) encapsulants, causing the industry to move toward polyolefin-based encapsulants. Transparent backsheets have also been introduced as an alternative to the rear glass for decreasing the module weight and aiding the effusion of trapped gaseous degradation products in the laminate. New amendments to IEC 61215 standard protocols for G/G bifacial modules have also been proposed so that the rear side power generation and UV exposure will be standardized. We further summarize a suite of destructive and non-destructive characterization techniques, such as current-voltage scans, module electro-optical imaging, adhesion tests, nanoscale structural/chemical investigation, and forensic analysis, to provide deeper insights into the fundamental properties of the module materials degradation and how it can be monitored in the G/G construction. This will set the groundwork for future research and product development.

14 SOLAR ENERGY↗
DOE OSTI2021

Fast switching magnet for heavy ion beam separation

This paper presents the design for a switching magnet capable of deflecting 6.5 MeV/u heavy-ion beams with mass-to-charge ratio of 7 by 10 degrees. This magnet can produce variable flat-top pulses from 1 to 30 ms with rise and fall times of less than 0.5 ms at a variable duty cycle of 3–91% into a heavily inductive load. The magnet has a laminated, iron dominated, H-shaped core. Directly-cooled copper pancake coils energize the magnet. We present the magnet design considerations, including the results of extensive computer modeling. Finally, we also present the conceptual engineering design and the studies of magnet yoke fabrication.

47 OTHER INSTRUMENTATION↗