SEARCH · Search NASA

Results for “MADe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Remanent magnetization and structural effects due to shock in natural and man-made iron-nickel alloys

Explosive shock or meteorite impact are significant remagnetization processes. The mechanisms of remagnetization associated with the dynamic processes depend on the peak shock pressure, the nature of the shocked materials, and the behavior of the shock in the material. Magnetic measurements can be used to classify products formed during a shock process, and magnetic measurements can be used to investigate the process itself because of the special characteristics of the remanent magnetization vectors. The magnetic coercive force increases more rapidly in quenched and annealed iron-nickel alloys as nickel is added than it does in the alloys which have been shocked.

Wasilewski, P. J.↗

NASA NTRS1974

Stratospheric ozone destruction by man-made chlorofluoromethanes

Calculations indicate that chlorofluoromethanes produced by man can greatly affect the concentrations of stratospheric ozone in future decades. This effect follows the release of chlorine from these compounds in the stratosphere. Present usage levels of chlorofluoromethanes can lead to chlorine-catalyzed ozone destruction rates that will exceed natural sinks of ozone by 1985 or 1990.

Cicerone, R. J.↗

NASA NTRS1975

Cryogenic line insulation made from prefabricated polyurethane shells

Prefabricated polyurethane foam insulation is inexpensive and easily installed on cryogenic lines. Insulation sections are semicircular half shells. Pair of half shells is placed to surround cryogenic line. Cylindrically-shaped knit sock is pulled over insulation then covered with polyurethane resin to seal system.

Lerma, G.↗

NASA NTRS1975

Reflecting heat shields made of microstructured fused silica

Heat sheidls constructed from selected monodisperse distributions of high-purity fused-silica particles are efficient reflectors of visible and near-UV radiation generated in shock-layer of space probe during atmospheric entry.

Congdon, W. M.↗

NASA NTRS1975

Development and validation of methods for man-made machine interface evaluation

The alternate methods of conducting a man-machine interface evaluation are classified as static and dynamic, and are evaluated. A dynamic evaluation tool is presented to provide for a determination of the effectiveness of the man-machine interface in terms of the sequence of operations (task and task sequences) and in terms of the physical characteristics of the interface. This dynamic checklist approach is recommended for shuttle and shuttle payload man-machine interface evaluations based on reduced preparation time, reduced data, and increased sensitivity of critical problems.

Malone, T. B.↗

NASA NTRS1974

Geodetic corrections and related information from oceanographic measurements made by Seasat-A

Oceanographic measurements taken by SEASAT-A are not only applicable to correct altimetry data for the desired geoid but also, as a result, they themselves are useful by-products for basic and applied research in the fields of sciences and engineering, exploratory development in sensor design and measurement techniques, and prediction products for operational fleet support. Among these measurements the important ones are current, sea state, and tides. Identified are parameters of the measurements which will be used to eliminate temporal environmental biases from geodetic measurements, and also to describe the physical processes involved.

Chen, D.↗

NASA NTRS1975

Implications for flare build-up and heating from observations made by OSO-7

The evolution of the EUV and soft X-ray emission in the event on January 19, 1972 are discussed in terms of the slow (passive) and fast (active) phases of flare evolution that were previously discussed. The implications are summarized for a flare build-up model which was derived-from these observations.

Neupert, W. M.↗

NASA NTRS1975

Alteration of the ionosphere by man-made waves

In recent years powerful radio wave transmissions beamed at the ionosphere at frequencies somewhat below the penetration frequency of the F2 layer produced the following, mostly unexpected, spectacular effects: (1) artificial spread F seen on ionograms and implying the presence of large scale field-aligned irregularities in the ionospheric plasma density; (2) very strong additional absorption of probing waves reflected by the F2 layer; (3) field-aligned 'on frequency' scattering of UHF waves; (4) scattering of UHF waves by Langmuir waves which are believed to be parametrically excited; (5) the 630 nm airglow is artificially enhanced by a modifying wave of ordinary polarization but it is reduced in intensity by a modifying wave of extraordinary polarization; (6) the shape of the F2 layer is modified. The results of the observations are described and their tentative interpretation in terms of different parametric instabilities is outlined.

Fejer, J. A.↗

NASA NTRS1976

Measurements of atmospheric ozone made from a GASP-equipped 747 airliner Mid-March, 1975

This paper presents data on the ozone mixing ratio, static air temperature, wind speed, and wind direction obtained at altitudes from 8 to 12 km during several flights of a commercial airliner equipped with a fully automated air-sampling system developed for the NASA Global Atmospheric Sampling Program (GASP). The objectives of GASP are reviewed, and the data-gathering techniques are described. Two data sets are discussed which illustrate variations of the upper-tropospheric and lower-stratospheric ozone mixing ratios as a function of geographical location and aircraft altitude. Good agreement is found between the GASP data and the tropopause height obtained from National Meteorological Center gridded data.

Falconer, P. D.↗

NASA NTRS1976

Weight comparisons of optimized stiffened, unstiffened, and sandwich cylindrical shells made from composite or aluminum materials

This work presents optimum designs for unstiffened, hat stringer-stiffened and honeycomb sandwich cylinders under axial compression. Optimization results for graphite-epoxy cylinders show about a 50 percent weight savings over corresponding optimized aluminum cylinders for a wide loading range. The inclusion of minimum gage considerations results in a significant weight penalty, especially for a lightly loaded cylinder. Effects of employing a smeared stiffener buckling theory in the optimization program are investigated through comparison of results obtained from a more accurate branched shell buckling computer code. It was found that the stiffener cross-sectional deformations, which are usually ignored in smeared stiffener theory, result in about a 30 percent lower buckling load for the graphite-epoxy hat stiffened cylinder.

Agarwal, B. L.↗

NASA NTRS1975

CARETS: A prototype regional environmental information system. Volume 6: Cost, accuracy and consistency comparisons of land use maps made from high-altitude aircraft photography and ERTS imagery

Accuracy analyses for the land use maps of the Central Atlantic Regional Ecological Test Site were performed for a 1-percent sample of the area. Researchers compared Level II land use maps produced at three scales, 1:24,000, 1:100,000, and 1:250,000 from high-altitude photography, with each other and with point data obtained in the field. They employed the same procedures to determine the accuracy of the Level I land use maps produced at 1:250,000 from high-altitude photography and color composite ERTS imagery. The accuracy of the Level II maps was 84.9 percent at 1:24,000, 77.4 percent at 1:100,000, and 73.0 percent at 1:250,000. The accuracy of the Level I 1:250,000 maps produced from high-altitude aircraft photography was 76.5 percent and for those produced from ERTS imagery was 69.5 percent. The cost of Level II land use mapping at 1:24,000 was found to be high ($11.93 per km 2 ). The cost of mapping at 1:100,000 ($1.75) was about 2 times as expensive as mapping at 1:250,000 ($.88), and the accuracy increased by only 4.4 percent. Level I land use maps, when mapped from high-altitude photography, were about 4 times as expensive as the maps produced from ERTS imagery, although the accuracy is 7.0 percent greater. The Level I land use category that is least accurately mapped from ERTS imagery is urban and built-up land in the non-urban areas; in the urbanized areas, built-up land is more reliably map

Accuracy↗

NASA NTRS1977

Radical simplification made easy

Problems encountered in manipulating algebraic numbers and functions are discussed. Methods for simplifying nested and un-nested radicals are described. Results obtained are either classical or direct corollaries of classical results.

Zippel, R. E. B.↗

NASA NTRS1976

Atmospheric ozone measurements made from B-747 AIRLINERS: Spring 1975

Atmospheric ozone in the upper troposphere and lower stratosphere north of the equator has been registered aboard two commercial B-747 airliners. The composite ozone, flight and meteorological data are reported. Attention is drawn particularly to the vertical profiles of atmospheric ozone mixing ratio as a function of both distance from the tropopause and curvature of the streamlines. The GASP observations suggest that ozone levels typical of the lower stratosphere are often embedded in the upper troposphere, principally during occassions when cyclonic wind curvature was noted.

Falconer, P. D.↗

NASA NTRS1975

Environmental Health concerns in natural and man-made environments

Industrial hygene and environmental health aspects of ground operation at the Jet Propulsion Laboratory were investigated. Major areas of concern are: (1) toxic substances, (2) noise pollution, (3) electromagnetic radiation; and (4) biohazards and sanitation. Each of these categories are also studied in a closed environment, such as encountered aboard of a spacecraft.

Bergtholdt, C. P.↗

NASA NTRS1976

Greenhouse effects due to man-made perturbations of trace gases

Nitrous oxide, methane, ammonia, and a number of other trace constituents of the earth's atmosphere have infrared absorption bands in the spectral range from 7 to 14 microns. Despite their small amounts, these gases can have a significant effect on the thermal structure of the atmosphere by transmitting most of the thermal radiation from the earth's surface to the lower atmosphere. In the present paper, this greenhouse effect is computed for a number of trace gases. The nature and climatic implications of possible changes in the concentrations of N2O, CH4, NH3, and HNO3 are discussed.

Wang, W. C.↗

NASA NTRS1976

Internal wave observations made with an airborne synthetic aperture imaging radar

Synthetic aperture L-band radar flown aboard the NASA CV-990 has observed periodic striations on the ocean surface off the coast of Alaska which have been interpreted as tidally excited oceanic internal waves of less than 500 m length. These radar images are compared to photographic imagery of similar waves taken from Landsat 1. Both the radar and Landsat images reveal variations in reflectivity across each wave in a packet that range from low to high to normal. The variations point to the simultaneous existence of two mechanisms for the surface signatures of internal waves: roughening due to wave-current interactions, and smoothing due to slick formation.

Elachi, C.↗

NASA NTRS1977

Measurement of the optical properties of lunar rocks in the transition zone, resulting from observations made by Lunokhod 2

Photometric measurements were carried out directly on the lunar surface with the aid of a calibration device, a plate with fields of different brightness, placed in the field of view of the panoramic telephotometers. The brightness of the fields of the calibration plate were measured in preliminary studies, relative to the brightness of a magnesia screen. This permitted determination of the reflectance features of the surficial lunar material relative to the standard most widely used in brightness studies of natural substances. The total brightness of sections a few centimeters across was recorded in direct proximity to the apparatus. The total area investigated in one panorama was about one square meter. Several areas in the mare and highland regions were studied. The albedos of various surface objects were obtained. A comparison of the brightness measurements with data from the RIFMA-M instrument discloses a correlation of the albedo change with change in chemical composition of the surface rock. Direct photometric studies of the lunar surface in the "mare-highland" transition zone assist in tracing the transition from one type of rock to another, and in obtaining information on the processes of material exchange between these two types of lunar landscape.

Lipskiy, Y. N.↗

NASA NTRS1978

Verification results for the Spectral Ocean Wave Model (SOWM) by means of significant wave height measurements made by the GEOS-3 spacecraft

Significant wave heights estimated from the shape of the return pulse wave form of the altimeter on GEOS-3 for forty-four orbit segments obtained during 1975 and 1976 are compared with the significant wave heights specified by the spectral ocean wave model (SOWM), which is the presently operational numerical wave forecasting model at the Fleet Numerical Weather Central. Except for a number of orbit segments with poor agreement and larger errors, the SOWM specifications tended to be biased from 0.5 to 1.0 meters too low and to have RMS errors of 1.0 to 1.4 meters. The much fewer larger errors can be attributed to poor wind data for some parts of the Northern Hemisphere oceans. The bias can be attributed to the somewhat too light winds used to generate the waves in the model. Other sources of error are identified in the equatorial and trade wind areas.

Pierson, W. J.↗