Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

The convective liquidus in a solidifying magma chamber - A fluid dynamic investigation

An experimental study of the solidification of a layer of paraffin cooled from above is reported. When the fluid is superheated, convection sets in at the beginning of cooling but rapidly decreases in intensity. Once the layer has lost its superheat, convection ceases and further cooling is by conduction. The interior temperature then remains constant until encountered by the upper crust. The convective liquidus is defined as the temperature threshold below which convection is very weak or nonexistent. In natural basaltic systems the convective liquidus, although strictly unknown, may be very close to the true liquidus. Rapid convection may therefore not be a dominant process during the crystallization of many magmna chambers; instead, convection is part of an overall intimate balance between phase equilibria, crystal growth, and heat transfer.

Brandeis, Genevieve↗

A tomographic glimpse of the upper mantle source of magmas of the Jemez lineament, New Mexico

In this study, the lateral variations of the P wave velocity as a function of depth were examined for the regions of the Rio Grande rift and the Jemez lineament, to infer spatial distributions of partial melt in the upper mantle source zones for the rift and the lineament. The method involved measurements of teleismic P wave delays at a 22-station network followed by performing a damped least-squares three-dimensional inversion for these lateral variations. Results indicate that, directly beneath the Jemez lineament (but not beneath the Rio Grande rift), there is a 100-km-wide 1-2-percent low-P-wave-velocity feature in the depth range of 50-160 km. This implies that the volcanic potential of the Jemez lineaments continues to greatly exceed that of the Rio Grande rift.

Spence, William↗

Lunar oxygen and metal for use in near-Earth space: Magma electrolysis

Because it is energetically easier to get material from the Moon to Earth orbit than from the Earth itself, the Moon is a potentially valuable source of materials for use in space. The unique conditions on the Moon, such as vacuum, absence of many reagents common on the Earth, and the presence of very nontraditional ores suggest that a unique and nontraditional process for extracting materials from the ores may prove the most practical. With this in mind, an investigation of unfluxed silicate electrolysis as a method for extracting oxygen, iron, and silicon from lunar regolith was initiated and is discussed. The advantages of the process include simplicity of concept, absence of need to supply reagents from Earth, and low power and mass requirements for the processing plant. Disadvantages include the need for uninterrupted high temperature and the highly corrosive nature of the high-temperature silicate melts which has made identifying suitable electrode and container materials difficult.

Colson, Russell O.↗

Magma Electrolysis: An update

Electrolytic extraction of O2 from molten lunar soil is conceptually simple and thus a candidate process for producing O2 on the Moon. Possible container and electrode materials are being tested for durability in corrosive high-temperature silicate melts and looking for complications that might increase energy requirements. Gaseous oxygen is being produced by electrolysis of 1-2 gram quantities of silicate melts in spinel (MgAl2O4) crucibles; in these melts, spinel is a stable phase. The concentration of FeO was kept low because FeO decrease O2 production efficiency. Platinum electrodes were placed about 0.5 cm apart in the melt. The spinel crucible was still intact after 40 minutes of electrolysis, when the experiment was halted for examination. The Pt anode was also intact; its Pt was maintained in a dynamci state in which the anode was continuously oxidized but quickly reduced again by the silicate melt, inhibiting migration of Pt away from the anode. In melts with low concentrations of Al2O3 + SiO2 (2 wt percent), the energy of resistance heating was only approximately equal to 10 to 20 percent of the theoretical amount required to produce O2. In melts substantially more concentrated in Al2O3 + SiO2, higher melt viscosity resulted in frothing that, in the worst case, caused high enough melt resistivities to raise the energy requirements to nearly 10 times theoretical. Both Fe and Si are produced at the cathode; in iron-rich melts, a- and c-iron and molten ferrosilicon were observed. Production was also observed at the cathode of a previously unrecognized gas; which is not yet identified. The solubility of metallic species was measured in silicate melts. They are too low to reduce significantly the efficiency of O2 production.

Colson, Russell O.↗

Rare earth elements in Angra dos Reis and Lewis Cliff 86010, two meteorites with similar but distinct magma evolutions

Data are presented on ion microprobe measurements of REE and selected trace element abundances in individual grains of merrillite, fassaite, olivine, kirschsteinite, and plagioclase of Lewis Cliff 86010 (LEW 86010) meteorite and in merrillite and fassaite grains of Angra dos Reis (ADOR). Results show a close relationship between the two meteorites and support a magmatic origin for LEW 86010. However, the measurements indicate that, despite numerous common characteristics, the two meteorites must have been produced in separate magmatic events involving similar but distinct processes and parent melts.

Crozaz, Ghislaine↗

Chassigny petrogenesis - Melt compositions, intensive parameters, and water contents of Martian (?) magmas

This paper considers petrogenesis of SNC meteorites by examining partially crystallized melt inclusions in cumulus olivine grains in Chassigny meteorite. First, all phases in the Chassigny inclusions were analyzed by electron microprobe, followed by an experimental investigation of the kaersutite/melt equilibria. Results yield the intensive parameters which stabilize igneous kaersutite and the melt compositions that coexist with kaersutite. The results are used to model Chassigny petrogenesis. It is argued that the existence in the Chassigny of hydrous melts and the conditions appropriate for amphibole crystallization suggest the existence on the Chassigny parent body (Mars) of SiO2-rich lavas.

Johnson, Marie C.↗

Lunar oxygen and metal for use in near-earth space - Magma electrolysis

The unique conditions on the moon, such as vacuum, absence of many reagents common on the earth, and presence of very nontraditional 'ores', suggest that a unique and nontraditional process for extracting materials from the ores may prove the most practical. An investigation has begun into unfluxed silicate electrolysis as a method for extracting oxygen, Fe, and Si from lunar regolith. The advantages of the process include simplicity of concept, absence of need to supply reagents from the earth, and low power and mass requirements for the processing plant. Disadvantages include the need for uninterrupted high temperature and the highly corrosive nature of the high-temperature silicate melts, which has made identifying suitable electrode and container materials difficult.

Colson, Russell O.↗

Forsterite/melt partitioning of argon and iodine: Implications for atmosphere formation by outgassing of an early Martian magma ocean

Argon and Xe in the Martian atmosphere are radiogenic relative to the Martian mantle if the SNC meteorites are from Mars. Decay of the short lived isotope I-129 to Xe-129 (t sub 1/2 = 16 m.y.) is the most plausible source of the radiogenic Xe. This short half life constrains any process responsible for the elevated Xe-129/Xe-132 ratio of the Martian atmosphere to occur very early in solar system history. Musselwhite et al. proposed that the differential solubility of I and Xe in liquid water played a key role in producing the radiogenic signature in the Martian atmosphere. Here we explore an alternative hypothesis involving purely igneous processes, and motivated in part by new experimental results on the partitioning of I and Xe between minerals and melt.

Musselwhite, Donald S.↗

Evidences for the terrestrial magma ocean from high-pressure melting experiments

In order to study the early evolutionary history of our planet, the author has carried out a series of melting experiments on primitive mantle peridotites. Using a new multi-anvil apparatus (SPI-1000), the author revisited the melting study on mantle peridotites and also started a melting study for representative chondrite compositions in the pressure range of 25 Gpa. The updated phase diagram for the peridotite is shown as is the preliminary melting phase diagram for Allende C3 chondrite. The liquidus and solidus of the Allende chondrite are extrapolated based on experimental results at 24 to 26 GPa on the same rock.

Takahashi, Eiichi↗

Inheritance of magma ocean differentiation during lunar origin by giant impact

The giant impact model for the Moon has won widespread support. It seems to satisfactorily explain the high angular momentum of the Earth-Moon system, and the strong depletion of FeNi in the Moon. This model is usually assumed to entail no significant fractionation of nonvolatile lithophile elements relative to a simple binary mixture of impactor silicates plus protoearth silicates. Although the Earth may have been hot enough before the impact to be completely molten, analysis of the likely number and timing of major impacts in the prehistory of the impactor indicates that a fully molten, undifferentiated condition for that relatively small body is unlikely. Given selective sampling by the giant impact, any significant vertical differentiation within the noncore portion of the impactor would have been largely inherited by the Moon.

Warren, Paul H.↗

Steady state composition with low Fe(2+) concentrations for efficient O2 production by 'magma' electrolysis of lunar soils

Parameters are estimated for a hypothetical, well stirred, continuous-feed electrolytic cell that converts 20 percent of a lunar soil feedstock to O2 gas, 26 percent to Fe-Si metal, 13 percent to spinel, and 41 percent to slag. Advantages of a molten Fe-Si cathode for trapping metal on reduction, a relatively conductive steady-state composition in equilibrium with spinel (a proposed container material), and close electrodes (less than 1 cm cathode-anode distance) are discussed. To produce 1 ton of O2, about 6 MHW of energy are required for the electrolysis and IR heating within the melt, and another about 6 MHW may be introduced as waste heat through internal resistance of the electrodes. Thus, to produce 1 ton of O2 per 24 hours, about 0.5 MW of power delivered to the cell would be required.

Haskin, Larry A.↗

Bubble coalescence in magmas

The most important factors governing the nature of volcanic eruptions are the primary volatile contents, the ways in which volatiles exsolve, and how the resulting bubbles grow and interact. In this contribution we assess the importance of bubble coalescence. The degree of coalescence in alkali basalts has been measured using Image Analysis techniques and it is suggested to be a process of considerable importance. Binary coalescence events occur every few minutes in basaltic melts with vesicularities greater than around 35 percent.

Herd, Richard A.↗

Partitioning in REE-saturating minerals - Theory, experiment, and modelling of whitlockite, apatite, and evolution of lunar residual magmas

Compositions, including REEs determined by ion microprobe, of apatite and whitlockite in lunar rock assemblages rich in incompatible trace elements, are presented. Concentrations of REEs in lunar whitlockites are high, ranging from about 1.2 to 2.1 REEs (lanthanides + Y) per 56 oxygens. This slightly exceeds the level of two REE atoms per 56 oxygens at which the dominant substitution theoretically becomes saturated. This saturation effect leads to whitlockite REE(3+) D values at typical lunar whitlockite REE concentrations which are 30-40 percent lower than the D values at low concentrations. The halogen-to-phosphorous ratio in lunar melts is a key factor determining the REE distribution with crystalline assemblages. As long as P and REE concentrations of melts are in KREEP-like proportions, one or both of the phosphates will saturate in melts at similar REE concentrations.

Jolliff, Bradley L.↗

A Liquidus Geothermometer for SNC, Lunar, and Eucritic Magmas

Two very useful pieces of information about a basalt are its liquidus temperature and liquid line of descent. To determine these, experiments are performed at various temperatures on the composition of interest between the solidus and liquidus. There are numerous examples of such experiments in the literature.

Jones, J. H.↗

Topographic Evidence for Eruptive Style Changes and Magma Evolution of Small Plains-style Volcanoes on Earth and Mars

Topographic profiles and surface characteristics of small (5 - 25 km diameter) plains-style shield volcanoes on the eastern Snake River Plain (ESRP) provide a method to evaluate eruptive processes and magmatic evolution on Martian volcanic plains. The ESRP is an ideal place to observe Mars-like volcanic features where hundreds of small monogenetic basaltic shields dominate the volcanic-sedimentary depositional sequence, and numerous planetary analogues are evident: coalescent mafic shields, hydromagmatic explosive eruptions, the interaction of lava flows with surficial water and glacial ice, and abundant eolian sand and loess. Single flows cannot be correlated over great distances, and are spatially restricted. These relations are useful for planetary exploration when inferring volcanic evolutionary patterns in lava plains represented by numerous eruptive vents. High spatial resolution imagery and digital topographic data for Mars from MOC, MOLA, and THEMIS is allowing for improvements in the level of detail of stratigraphic mapping of fields of small (< 25 km in diameter) volcanoes as well as studies of the morphological characteristics of individual volcanoes. In order to compare Mars and Earth volcanic features, elevation data from U.S.G.S. 10-meter digital elevation models (DEMs) and high-precision GPS field measurements are used in this study to generate approx. 20m spacing topographic profiles from which slope and surface morphology can be extracted. Average ESRP flank and crater slopes are calculated using 100 - 200 m spacing for optimum comparison to MOLA data, and to reduce the effects of surface irregularities.

Hughes, S. S.↗

Devolatilized-Allende Partial Melts as an Analog for Primitive Angrite Magmas

We have shown that partial melts of devolatilized Allende chondrite (CV3) have bulk compositions generally similar to those of angrites. Here we show that the recently described D'Orbigny and Sahara 99555 angrites are virtually identical in major-element composition to specific Allende experimental melts from. This observation has petrogenetic significance for the origins of the angrite clan.

Jurewicz, A. J. G.↗