Search NASA⌕ Search

SEARCH · Search NASA

Results for “MATERIALS PROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

A Review on Direct Air Capture of Carbon Dioxide: Sorbent Materials, Process Engineering, Industrial Scale-Up, and Future Perspectives

The relentless accumulation of anthropogenic greenhouse gases has driven atmospheric carbon dioxide concentrations to approximately 426 ppm, necessitating the aggressive deployment of negative-emission technologies to achieve net zero by 2050. Direct air capture (DAC) offers a scalable, location-independent approach to atmospheric carbon removal; however, it is fundamentally constrained by the significant thermodynamic barriers associated with capturing CO 2 from ultradilute ambient conditions, requiring minimum thermodynamic energy inputs substantially higher than those for postcombustion point sources. This comprehensive review critically examines the technological landscape of DAC, focusing on the interdependent triad of sorbent material design, contactor engineering, and regeneration thermodynamics. We evaluate the fundamental boundaries of adsorption, emphasizing that an optimal adsorption enthalpy and isosteric heat of adsorption must balance the high CO 2 uptake capacity with the energetic penalties of sorbent regeneration. A systematic, comparative analysis of state-of-the-art sorbents is presented, encompassing mesoporous silicas, zeolites, carbon-based materials (CBMs), metal−organic frameworks (MOFs), porous organic polymers (POPs), and polymeric membranes. Special attention is devoted to surface functionalization strategies, particularly amine grafting and impregnation, which transition capture mechanisms from physisorption to chemisorption to enhance selectivity under ambient moisture and low partial pressures. Furthermore, we assess the operational merits of various reactor configurations, including gas−solid, gas−liquid, and membrane contactors, alongside regeneration cycles such as temperature, vacuum, pressure, and moisture swing adsorption. Finally, the review bridges fundamental materials science with industrial application by chronicling the scale-up milestones of pioneering entities and providing a strategic roadmap for advancing DAC technology readiness levels toward global deployment.

Adsorption↗

Further analysis of field effects on liquids and solidification. Study of the liquid-solid transition for materials processing in space

Expressions for diffusion coefficient, D, and solidification rate, Uc, from the free volume model of liquids developed by Turnbull and Cohen have been used to estimate the effects which microgravity and magnetic fields will have on these quantities. The mathematical formalism describing changes in D and Uc is the same for both the microgravity and magnetic field cases, but the difference between the magnitudes of the two effects is quite large. The change in D and Uc is found to be less than 0.0001% for the microgravity case and on the order of 0.1 to 1.1% for the magnetic field case for four representative materials. D and Uc are found to increase under the influence of an applied magnetic field, and this is in agreement with experimental observations.

Seiler, R. F.↗

Laser Material Processing Final Report CRADA No. TC-321-92

Current commercial cw flashlamp pumped solid-state laser systems employed in laser machining operate at multi-hundred watt to kilowatt levels and produce 30-100 times diffraction limited beam quality. Developing similar power lasers but with a beam quality 5-10 times better is an important advancement in the laser machining industry especially precision laser machining.

36 MATERIALS SCIENCE↗

Computational Material Processing in Microgravity

Working with Professor David Matthiesen at Case Western Reserve University (CWRU) a computer model of the DPIMS (Diffusion Processes in Molten Semiconductors) space experiment was developed that is able to predict the thermal field, flow field and concentration profile within a molten germanium capillary under both ground-based and microgravity conditions as illustrated. These models are coupled with a novel nonlinear statistical methodology for estimating the diffusion coefficient from measured concentration values after a given time that yields a more accurate estimate than traditional methods. This code was integrated into a web-based application that has become a standard tool used by engineers in the Materials Science Department at CWRU.

Source record↗

Monodisperse Latex Reactor (MLR): A materials processing space shuttle mid-deck payload

The monodisperse latex reactor experiment has flown five times on the space shuttle, with three more flights currently planned. The objectives of this project is to manufacture, in the microgravity environment of space, large particle-size monodisperse polystyrene latexes in particle sizes larger and more uniform than can be manufactured on Earth. Historically it has been extremely difficult, if not impossible to manufacture in quantity very high quality monodisperse latexes on Earth in particle sizes much above several micrometers in diameter due to buoyancy and sedimentation problems during the polymerization reaction. However the MLR project has succeeded in manufacturing in microgravity monodisperse latex particles as large as 30 micrometers in diameter with a standard deviation of 1.4 percent. It is expected that 100 micrometer particles will have been produced by the completion of the the three remaining flights. These tiny, highly uniform latex microspheres have become the first material to be commercially marketed that was manufactured in space.

Kornfeld, D. M.↗

The origin of the energy-dose window in separation-by-implanted-oxygen materials processing

The energy-dose (ED) window (so called Izumi window) for the formation of a perfect planar and homogeneous buried oxide layer in silicon using ion implantation is controlled by the interaction of excess radiation defects and the local oxygen concentration. The ED window is defined by an appropriate correlation between the distribution of implantation-induced excess defects and the position of the finally formed oxide layer. A quantitative relation is established on the basis of collisional computer simulations. The findings are discussed in terms of oxide precipitation under the influence of defects.

36 MATERIALS SCIENCE↗

Development of Materials Processing Systems for Use in Space on Low-g Simulation Devices

Advanced furnace systems are being developed for use in space. Systems are being tested for current experiment applications and modified for future experiment requirements. Future projects are: (1) fabrication and testing of the Advanced Automated Directional Solidification Furnace (AADSF) flight hardware; (2) development of a Heat Pipe Furnace (HPF) for use in space. Heat pipes will be tested for space flight qualification in conjunction with the furnace development. The HPF design will be based on the AADSF development and will be of modular design including capabilities of operating with or without heat pipes; and (3) the AADSF furnace will be modified and tested to operate at temperatures up to 1700 C in the heated cavity. This will be accomplished by developing a new hot end heating module and insulation package for the existing AADSF. Refurbishment of the Drop Tower Furnace (DTF) is under way. The DTF can operate at temperatures up to 1700 C. The sample size will be approximately 3/8 in. dia. x 5/8 in. long. Design improvements for the General Purpose Rocket Furnace (GPRF) for use in the Material Experiment Assembly (MEA) are to be accomplished.

Aldrich, B. R.↗

Application of Advanced Materials Processing to Enable Direct Production of Fast Reactor Fuel Alloys

Argonne National Laboratory (the Contractor), located in Lemont, IL, and Oklo, Inc. (the Participant), headquartered in Sunnyvale, CA, entered into a Cooperative Research and Development Agreement (CRADA) to integrate advanced electrorefining co-deposition and molten-salt monitoring technologies to produce a uranium-transuranic (U/TRU) alloy within a controlled composition range that can be used as fast reactor fuel for Oklo, Inc.’s advanced reactor technology. Argonne performed the integration of electrorefining and process monitoring technologies, determined operating parameters for producing U/TRU alloys, and developed optimized design and operating parameters for co-deposition of U/TRU alloys. Oklo, Inc. worked with Argonne and the Nuclear Regulatory Commission (NRC) to provide the necessary process documentation to begin implementing pyroprocessing technology in the fast reactor fuel production process. Outcomes of this project included a pilot-scale co-deposition cathode design and technical basis for the operation of the co-deposition electrorefiner to produce U/TRU alloys with controlled composition.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Infrared thermometry in high temperature materials processing: influence of liquid water and steam

Here, the capability of four infrared thermometry techniques (2-colour and 1-colour pyrometers, Pyrolaser and IR camera) was evaluated with respect to the impact of water or steam in the line of sight to determine temperature from two heat sources (blackbody calibration source and steel block inside the furnace). The influence of liquid water on the temperature readings was minimal when using 2-colour pyrometry due to comparable absorption coefficients of water for the measured wavelengths. The signals measured using both the Pyrolaser and the 1-colour pyrometer were decreased due to the partial absorption and resulted in an apparent temperature lower than the actual. Water readily absorbed the IR signal in the range of the IR camera operation, resulting in no signal whenever liquid water was present in the line of sight. Steam caused the most deviation and fluctuation of temperature readings for all techniques due to the large level of light scattering in addition to the absorption of the radiant energy. A technique was developed to determine the transmissivity (apparent emissivity) when water or steam is in the line of sight of measurement. An approximate correction to the measurements based on Planck’s law is discussed for both 2-colour and 1-colour pyrometers.

2-colour and 1-colour pyrometry↗

BioPuSL: Material & Process Optimization

Stereolithography is an advantages bioprinting technique that can be used to develop 3 dimensional printed structures. In the field, prints of structures with cells seeded after the printing process has completed has shown to generate high cell viability [ Hang Lin]. Currently, a technique is needed to print with cells already in the resin so that the cells print inside the structures as the layers are curing. For this to occur, the resin and the parameters of the printing process need to print high-resolution structures while still able to achieve high cell viability. This technique can have significant impact many biological fields like tissue and drug application studies. In this study, various concentrations of Poly (ethylene glycol) diacrylate (PEGDa) and Gelatin Methacryloyl (GelMA) are used as prepolymers with the photoinitiator Lithium phenyl- 2,4,6-trimethylbenzoylphosphinate (LAP) at 1% weight concentration is used in the resin. The mechanical properties, biocompatibility, and impacts of the parameters are tested. From this study we were able to conclude that the amount of PEGDa makes a significant impact on storage modulus of the gel. Likewise, the various amounts of PEGDa, when printing, will affect the amount of polymerization that occurs. Therefore, if less than the needed amount of PEGDa is used when printing, the 3D structure will not fully form or form at all. Also, when studying various GelMa concentrations in resin, the study resulted in the amount of GelMa is directly proportional to cell variability. These results will help determine the concentration of PEGDa and GelMa that can be tested in future studies to ultimately print cells in 3D structures with high cell viability.

36 MATERIALS SCIENCE↗