Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

High-Temperature Oxidation Behavior of Wrought and Additive Manufactured H282 in Direct-Fired Supercritical CO2 Power Cycle Environments

Materials selection is a key concern for corrosion resistance in high temperature and pressure direct-fired supercritical CO2 power cycles. The effect of elevated pressure on corrosion resistance can be critical, as impurities within the supercritical fluid such as H2O and O2 can result in additional corrosion behaviors. Utilizing additive manufacturing (AM) methods for construction of power cycle components requiring both compact and complex designs could be advantageous. AM H282 produced by laser powder bed fusion was exposed to direct-fired conditions (95CO2 – 4H2O – 1 O2) at 750 °C at both atmospheric pressure and supercritical conditions (20 MPa) for up to 4,000 hours. Oxidation behavior, sub-surface carbide formation, and chromia scale volatilization was dependent upon AM preparation techniques and surface modifications. These results are discussed in terms of the potential compatibility issues that may arise when using AM alloys in high temperature regions of direct-fired sCO2 power cycles, particularly for thin-walled components.

Carney, Casey↗
DOE OSTI2024

Highly Permeable Rubbery Thin Film Composite Membranes for CO2 Capture from Steel Mills

For presentation at the 2024 AIChE Annual Meeting, San Diego, CA, October 27-31, 2024. High-permeance and CO2-selective membranes are needed to make membrane technology economically viable for large-scale deployment of carbon capture from various industrial point sources such as steel mills. Thin film composite (TFC) membranes are necessary for this practical implementation because they can provide high permeance by forming a thin selective layer on top of a porous support layer. This presentation reports the rational design and fabrication of National Energy Technology Laboratory’s highly permeable non-aging TFC membranes achieved by: (1) synthesizing a high-performance rubbery selective material; (2) developing a high-porosity membrane support; (3) optimizing coating methods to assemble the two materials into scalable membranes; and (4) scaling up membrane supports and TFCs via a roll-to-roll process. This talk will also cover the design, computational fluid dynamic simulation, 3D printing, construction, and permeation testing of plate-and-frame membrane modules for an upcoming field demonstration at U. S. Steel’s Edgar Thomson Plant in Braddock, PA.

Zhu, Lingxiang↗
DOE OSTI2024

A Multidisciplinary Approach to Integrated Energy Systems: Advanced Nuclear Plants with Thermal Storage for Dynamic and Flexible Operation in Diverse Markets

Energy supply, distribution, and demand are continuously evolving in accordance with the integration of new power generation sources. In the United States, there is a progressive shift toward incorporating fluctuating energy sources such as wind and solar into the energy mix, alongside the distributed generation. Simultaneously, we are seeing a revolution in consumer technologies such as electric vehicles, energy devices for both residential and commercial use, and industrial processes—all contributing to a fundamental change in energy consumption dynamics. These scenarios have led to huge demand for enhanced flexibility from nuclear power plants (NPPs), requiring them to operate with unprecedented adaptability. Furthermore, advanced NPPs (A-NPPs) could potentially apply to scenarios in which power generation flexibility is prioritized over its current and conventional baseload generation capacity for traditional demand patterns. The present work covers several configurations for coupling nuclear energy production with thermal energy storage (TES). Previous work evaluated systems entailing a simple nuclear-TES configuration that used steam as a heat source for the TES of three different advanced reactors (ARs), but its heat diversion ratio (HDR) for charging was limited. The present work proposes a new configuration that features full decoupling of the nuclear reactor and the power cycle, using reactor coolant (i.e., gas) as a heat source for the TES and offering a theoretically unlimited HDR. This configuration is, however, more complex, as both high- and low-temperature TES (HT-TES and LT-TES) systems are required in order to cover the extended temperature range. Although this configuration imposes certain limitations on the discharge system configuration, it also presents the opportunity to design a more efficient system. For this case in particular, a steam reheat cycle is advantageous. Conventional TES systems take advantage of nominal efficiency when discharging, whereas the reheat cycle in the fully decoupled TES system affords a significant efficiency increase over conventional cases. Material selection, component/equipment sizing, and costing analyses were performed, followed by economic dispatch and size optimization. Dynamic models were developed for the decoupled system in order to generate insights into aspects of off design operation (e.g., drops in cycle efficiency), and these models enable exploration of potential mitigation strategies for addressing such drops. The models also highlight the need to design fail-safes that ensure continuous operational stability and minimize the impact of power ramping on the reactor parameters.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Investigation of Anomalous Thread Wear in EDS Vessels

Potential causes of anomalous thread wear observed on EDS system fasteners were investigated using the V25 two-piece clamped vessel as a test bed. Thread wear and metal particulate were analyzed across operational conditions. Despite intensive testing, galling wear was not triggered, reducing uncertainty about design tolerances, material selection, and environmental factors. Minimum service life benchmarks were established for two-piece clamp fasteners under normal EDS conditions.

42 ENGINEERING↗
DOE OSTI2023

3D CAD Modeling and Mechanical Integration at the Mu2e Experiment at Fermilab

This abstract encapsulates a transformative summer internship at Fermilab, focusing on the Mu2e Experiment within the Mechanical Integration and 3D CAD Modeling group. The internship was characterized by a two-phase approach, with the initial month dedicated to the design of an aluminum platform tailored for DS Trench Maintenance. This phase encompassed a comprehensive exploration of structural integrity, material selection, and precision engineering principles, demonstrating an adeptness in CAD modeling and a keen eye for detail. The subsequent month saw a seamless transition into a dynamic phase of the project, wherein the intern played a pivotal role in effecting numerous adjustments across diverse sections of the 3D experiment structure. This phase demanded a nuanced understanding of the intricacies of the Mu2e Experiment and a high level of proficiency in CAD modeling.

3D CAD Modeling↗
DOE OSTI2026

Conformable, Composite Tank for Liquid Hydrogen Storage in Heavy-duty Ground Transportation

Raytheon Technologies Research Center (RTRC), with its partners, Argonne National Labs and University of Dayton Research Institute proposed to design and manufacture a conformable composite tank prototype to store liquid Hydrogen (LH2) for heavy-duty truck applications. A dual-wall tank concept was proposed where an outer shell covers and protects an inner pressure vessel that stores liquid hydrogen. The inner pressure vessel is liner-less and designed with a conformable concept, derived from prior RTRC ARPA-E program where multiple vessels are coalesced into one, maximizing space utilization and reducing surface area for heat leak. The gap between the dual wall is evacuated of air pressure, and filled with multi-layer insulation to minimize radiative heat transfer. Fiber reinforced composites were proposed for light-weighting and conformable shape manufacture. To minimize LH2 leakage, carbon nanotubes-infused composites were proposed, in addition to use of thin plies. The project was divided into two 18-month budget periods (BP), BP1 and BP2, separated by a Go/No-Go gate review. The high-level goal for BP1 was to demonstrate the feasibility of the overall approach, the tank design, material selection, and manufacturing methodology, build and test a prototype tank; and the goal for BP2 was to design and manufacture a conformal tank per DOE requirements (minimum 20 kg of LH2) and perform a successful test of the tank. The program was terminated about two-thirds of the way through BP1. The outcome of this program would have permitted long-haul trucks and construction vehicles to use liquid Hydrogen, reducing the emission of green-house gases. This technology is applicable to other transportation sectors as well.

08 HYDROGEN↗
DOE OSTI2022

Durability Study of a High-Pressure Common Rail Fuel Injection System Using Lubricity Additive-Dosed Gasoline-Like Fuel—Improved Endurance with Upgraded Hardware

Gasoline compression ignition (GCI) is a promising combustion technology that can help the commercial transportation sector achieve operational flexibility and meet upcoming criteria pollutant regulations. However, high-pressure fuel injection systems (>1000 bar) are needed to enable GCI and fully realize its benefits compared to conventional diesel combustion. This work is a continuation of previous durability studies that identified three key technical risks after running gasoline-like fuel through a heavy-duty, common rail injection system: (i) cavitation damage to the inlet check valve of the high-pressure pump, (ii) loss of injector fueling capacity, (iii) cavitation erosion of the injector nozzle holes. Upgraded hardware solutions were tested on a consistent 400- to 800-hour NATO durability cycle with the same gasoline-like fuel as previous studies. The upgraded pump showed no signs of abnormal wear or cavitation damage to the inlet check valve. In contrast to previous studies, there were no signs of pump performance degradation observed after 400 hours of testing. Material selection and design upgrades were also made to the injector which, only showed a 6.5% loss in fueling capacity after 800 hours of durability testing compared to 49.3% previously. Finally, geometric nozzle hole features such as higher inlet radius of curvature and higher K-factor were found to correlate with reduced cavitation erosion. However, mitigation of eccentric radial needle motion (i.e., wobble) is likely needed to further suppress cavitation. In general, the results from this study indicate there are viable hardware-based solutions for improving the endurance of high-pressure systems when running with gasoline-like fuel.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Suppressed paramagnetism in amorphous Ta 2 O 5 − x oxides and its link to superconducting-qubit performance

Amorphous-oxide layers in thin-film capacitors are linked to reduced transmon-qubit T 1 coherence times. Ta -based capacitors outperform Nb -based ones, suggesting that amorphous Ta 2 O 5 − x is less lossy than Nb 2 O 5 − x . We investigate the microscopic features of these amorphous oxides using ab initio molecular dynamics and density functional theory, revealing the origins of the superior performance of Ta 2 O 5 − x . We establish that oxygen deficiency is less likely to occur in amorphous Ta 2 O 5 − x than in Nb 2 O 5 − x for 0 ≤ x ≤ 0.25 and that for a given oxygen deficiency x , metal Ta — Ta bond formation is enhanced. Such bonds, which are accommodated by structural flaws in the amorphous network, capture electrons better than in amorphous Nb 2 O 5 − x . These thermochemical differences quench or highly suppress magnetic moments in amorphous Ta 2 O 5 − x and eliminate a potential source of quasiparticles and magnetic flux noise. We also show that hyperfine couplings between Nb nuclei and local magnetic moments in Nb 2 O 5 − x can form “two-level systems” (TLSs) or “two-level fluctuators” with energy splittings of 100–1000 MHz or higher. This reveals a TLS mechanism in amorphous Nb 2 O 5 − x oxide layers that is likely inactive in Ta 2 O 5 − x . Our work provides a fundamental understanding of the materials chemistry and limitations imposed by native oxides of superconducting qubits that can be used to guide materials selection and processing.

Pritchard, P. Graham [Northwestern U.] (ORCID:0000↗
DOE OSTI2025

Correlating Superconducting Qubit Performance Losses to Sidewall Near-Field Scattering via Terahertz Nanophotonics

Elucidating dielectric losses, structural heterogeneity, and interface imperfections is critical for improving coherence in superconducting qubits. However, most diagnostics rely on destructive electron microscopy or low-throughput millikelvin quantum measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy of encapsulated niobium transmon qubits, revealing sidewall near-field scattering that correlates with qubit coherence. We further employ a THz hyperspectral line scan to probe dielectric responses and field participation at Al junction interfaces. These findings highlight the promise of THz near-field methods as a high-throughput proxy characterization tool for guiding material selection and optimizing processing protocols to improve qubit and quantum circuit performance.

Kim, Richard H.J. [Ames Lab]↗
DOE OSTI2019

Thallium bromide (TIBr) semiconductors and devices with extended life apparatus, methods, and system

Various technologies pertaining to formation or treatment of a thallium bromide crystal to improve the operable lifespan of a device that incorporates the thallium bromide crystal are described herein. In exemplary embodiments, treatments including focused ion beam implantation, selective material removal, and buffer layer application are performed on a thallium bromide crystal to inhibit motion of dislocations toward a region at which an electrical contact is desirably installed. In other exemplary embodiments, a thallium bromide crystal is doped with impurities during formation that inhibit the motion of dislocations in the crystal. In still other exemplary embodiments, a thallium bromide crystal is formed by way of processes that inhibit dislocation formation during crystal growth or eliminate dislocations in an existing thallium bromide mass.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electrochemical cells for direct oxide reduction, and related methods

A method of direct oxide reduction includes forming a molten salt electrolyte in an electrochemical cell, disposing at least one metal oxide in the electrochemical cell, disposing a counter electrode comprising a material selected from the group consisting of osmium, ruthenium, rhodium, iridium, palladium, platinum, silver, gold, lithium iridate, lithium ruthenate, a lithium rhodate, a lithium tin oxygen compound, a lithium manganese compound, strontium ruthenium ternary compounds, calcium iridate, strontium iridate, calcium platinate, strontium platinate, magnesium ruthenate, magnesium iridate, sodium ruthenate, sodium iridate, potassium iridate, and potassium ruthenate in the electrochemical cell, and applying a current between the counter electrode and the at least one metal oxide to reduce the at least one metal oxide. Related methods of direct oxide reduction and related electrochemical cells are also disclosed.

Tripathy, Prabhat K.↗
DOE OSTI2021

Molten salt environment creep testing extensometry system

Disclosed herein are systems, devices and methods for creep testing selected materials within a high-temperature molten salt environment. Exemplary creep testing systems include a load train for holding a test specimen under a load within a heated inert gas vessel. An extensometry system can be included to measure elongation of the test specimen while under load. The extensometry system can include fixed members and axially translating member that move along with the elongation of the test specimen, and the system can include a sensor to measure the relative axial motion between such components to measure elongation of the test specimen over time. The test specimen can include a cylindrical gage portion having an internal void filled with a molten salt during creep testing to simulate the corrosive effect of the molten salt on the specimen material during testing.

Ren, Wenlin↗
DOE OSTI2021

Stable electrolyte matrix for molten carbonate fuel cells

A method of making an electrolyte matrix includes: preparing a slurry comprising a support material, a coarsening inhibitor, an electrolyte material, and a solvent; and drying the slurry to form an electrolyte matrix. The support material comprises lithium aluminate, the coarsening inhibitor comprises a material selected from the group consisting of MnO 2 , Mn 2 O 3 , TiO 2 , ZrO 2 , Fe 2 O 3 , LiFe 2 O 3 , and mixtures thereof, and the coarsening inhibitor has a particle size of about 0.005 μm to about 0.5 μm.

Hilmi, Abdelkader↗
DOE OSTI2021

Thermoset composite having thermoplastic characteristics

A composite composition includes a thermoset resin and about 3 wt. % to about 35 wt. % of at least one material selected from the group consisting of cellulose nanofibrils (CNF), micro-sized cellulose fibers (MFC), and cellulose nanocrystals (CNC) dispersed therein as measured with respect to the overall weight of the composite composition. The cellulose nanofibrils and/or nanocrystals have an average diameter of about 5 nm to about 500 nm and an average aspect ratio in the range of about 5:1 to about 500:1. The cellulose micro-sized fibers have an average diameter of about 5 μm to about 100 μm and an average aspect ratio in the range of about 5:1 to about 250:1.

Ozcan, Soydan↗
DOE OSTI2021

Adsorption cooling system using metal organic frameworks

A highly adsorptive structure, includes: a substrate; and a metal-organic framework (MOF) comprising a plurality of metal atoms coordinated to a plurality of organic spacer molecules; wherein the MOF is coupled to at least one surface of the substrate, wherein the MOF is adapted for adsorbing and desorbing a refrigerant under predetermined thermodynamic conditions. The refrigerant includes one or more materials selected from the group consisting of: acid halides, alcohols, aldehydes, amines, chlorofluorocarbons, esters, ethers, fluorocarbons, perfluorocarbons, halocarbons, halogenated aldehydes, halogenated amines, halogenated hydrocarbons, halomethanes, hydrocarbons, hydrochlorofluorocarbons, hydrofluoroethers, hydrofluoroolefins, inorganic gases, ketones, nitrocarbon compounds, noble gases, organochlorine compounds, organofluorine compounds, organophosphorous compounds, organosilicon compounds, oxide gases, refrigerant blends and thiols.

Baumann, Theodore F.↗
DOE OSTI2021

Alternative low cost electrodes for hybrid flow batteries

An electrode for use in an all-iron redox flow battery is provided. In one example, the electrode may include a plastic mesh; and a coating on the plastic mesh. The coating may be a hydrophilic coating or a conductive coating and the electrode may have an electrode reaction potential is less than 0.8V. Further, a method of manufacturing a coated plastic mesh electrode for use in an all-iron redox flow battery is provided. In one example method, the steps include fabricating a plastic mesh, treating the plastic mesh by applying a solvent treatment or a plasma treatment or a mechanical abrasion treatment; coating the plastic mesh with a material selected from: carbon inks, metal oxides, and hydrophilic polymers.

Evans, Craig E.↗
DOE OSTI2021

Supporting the Transition from Grid-Scale to Emerging Market Wave Energy Converter Design and Assessment

In the past decade there has been increasing interest in emerging markets for wave energy, both as a stepping stone for development and as a way to create new opportunities for offshore markets such as ocean observation or desalination. Developers who were once focused exclusively on grid-scale development have begun to engage with more unique markets. This has led researchers to begin examining means of assessing emerging-market devices. In this paper, we analyze the Technology Performance Level (TPL) Assessment for its potential use in the assessment of emerging market wave energy converters (EM-WECs). We use Quality Function Deployment (QFD) and a question-by-question analysis of the TPL assessment to determine the changes necessary for such an assessment to be applicable in emerging markets. We discuss how the primary differences between the markets could impact the viable development pathways for developers hoping to succeed in multiple markets. We determine that the different stakeholders and stakeholder requirements of some emerging markets compared to gridscale applications should be met with changes to cost-toperformance metrics, prototype testing processes, recovery planning, materials selection, optimization objectives, and public engagement.

blue economy↗
DOE OSTI2022

High Temperature Steam Electrolysis Process Performance and Cost Estimates - DOE Hydrogen Program AMR Presentation

Technology readiness levels (TRLs) of electrolysis systems have dramatically increased in recent years as the interest in clean hydrogen production and decarbonization of transportation, industrial and other sectors increases across the globe. This is especially true of high temperature steam electrolysis (HTSE) / solid oxide electrolysis cell (SOEC) systems which show promise of much higher system efficiencies than other more developed electrolysis technologies. This possibility of higher efficiencies of HTSE / SOEC systems has been previously assumed to be theoretically possible but in recent years it has become less theoretical and more realistic as an increasing amount of suppliers complete lab and pilot tests showing very promising results. Research in the areas of manufacturing techniques, material selection, electrode and electrolyte compositions, and balance of plant size and integration continues at a fast pace as an increasing number of suppliers both internationally and domestically become involved. The advantages of HTSE become more pronounced when HTSE is coupled with nuclear power plants (NPPs). This is because thermal energy produced by the nuclear reactor can be used in a series of heat transfer loops and heat exchangers to vaporize HTSE feedwater, which drastically improves the economics of the process. Idaho National Laboratory (INL) has been very involved in the research and modeling of HTSE systems for a number of years, in collaboration with other national laboratories, academia, and industry stakeholders both on the hydrogen production as well as the hydrogen demand side. The modeling completed over the years on a large variety of projects has led to a wealth of knowledge at INL including in the area of the technoeconomic assessment (TEA) of HTSE systems. TEAs include process modeling of the HTSE systems to calculate system energy requirements and equipment sizing, followed by estimation of capital and operating costs to enable calculation of the levelized cost of hydrogen (LCOH). The TEA work performed has produced incremental improvements and tuning of the methods, assumptions, models, and results of the analyses as well as providing some opportunities for validating these results. The purpose of this document is to record the current baseline HTSE analyses led by INL to show the current status of assumptions and costs of these systems. Given the rapid development of this technology, the variety of suppliers entering the space, and the increasing attention government and industry are giving to such systems, this document may be updated on a periodic basis with updated analysis and assumptions. This document compiles various analyses results and approaches completed over a period of years into a single document to be used as a baseline going forward. It represents what the INL HTSE analysis group assumes to be the internal best estimate of the current operation, costs, and landscape of the HTSE industry state of the art capability for current SOEC technology in an Nth-of-a-Kind (NOAK) plant, which in this study is defined as existence of the manufacturing capacity to support previous deployment of N = 100 count of 25 MWe modular HTSE blocks (with modular equipment component cost reductions specified as following a 95% learning curve). That said, this is a public document and as such so no proprietary data was used or included in this report. There may be HTSE suppliers that have performance specifications, and cost estimates, and test data that differ from the analysis presented in this document. This document is meant to be a best conservative estimate of the technology and not an absolute reference.

08 HYDROGEN↗