Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methyl Formate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

O 2 -Dependence of reactions of 1,2-dimethoxyethanyl and 1,2-dimethoxyethanylperoxy isomers

Reaction mechanisms of Ṙ and ROȮ radicals derived from low-temperature oxidation of 1,2-dimethoxyethane (CH 3 O(CH 2 ) 2 OCH 3 ) were investigated using speciation from multiplexed photoionization mass spectrometry (MPIMS) measurements via Cl-initiated oxidation, in conjunction with electronic structure calculations. The experiments were conducted at 5 bar, from 450 K – 650 K, and O 2 concentrations from 1 · 10 14 cm –3 – 6 · 10 18 cm –3 to probe the effects on competing reaction channels of 1,2-dimethoxyethanyl (Ṙ) and 1,2-dimethoxyethanylperoxy (ROȮ) isomers. Several species were detected with photoionization spectral fitting – ethene, formaldehyde, methyl vinyl ether, and 2-methoxyacetaldehyde – and, as determined by electronic structure calculations, may form via unimolecular decomposition of 1,2-dimethoxyethanyl or 1,2-dimethoxyethanylperoxy. O 2 -dependent yield ratios show that the formation pathways for all species undergo a competition between O 2 -addition and unimolecular decomposition. Here, adiabatic ionization energies were also calculated and utilized along with exact mass determinations to infer contributions for other species derived exclusively from first- and second-O 2 -addition, including 1,2-dimethoxyethene, cyclic ethers, and dicarbonyls.

1,2-dimethoxyethane↗
DOE OSTI2026

Synthesis and Reactivity of Heteroleptic U 4+ Alkyl, Benzyl, and Hydride Imidophosphorane Complexes

A series of heteroleptic U 4+ benzyl, neopentyl, and methyl complexes supported by the imidophosphorane ligand, [N = P(N,N′-ditert-butylethylenediamide)(diethylamide)] 1− (NP*), were synthesized from the monoiodide precursor, [UI(NP*) 3 ]. These heteroleptic complexes were synthesized through the selective formation of [UI(NP*) 3 ] under transmetalation conditions in the reaction between [UI 4 (1,4-dioxane) 2 ] and K[NP*]. Formation of the homoleptic complex [U(NP*) 4 ] was not observed even in the presence of excess K[NP*]. The oxidation and hydrogenolysis reactivity of the neopentyl complex, [U(Npt)- (NP*) 3 ] (Npt = neopentyl) was explored. While cyclic voltammetry indicates a potentially isolable U5+ alkyl cation, chemical oxidation of the neopentyl complex results in the isolation of a cationic U 4+ complex with a bound diethyl ether in the primary coordination sphere, [U4+(NP*)) 3 (Et 2 O)][(BArF 24 )] (BArF 24 = tetrakis(3,5-bis(trifluoromethyl)phenyl)borate). Notably, hydrogenolysis of [U(Npt)(NP*) 3 ] with H2 gas at −20 °C results in the formation of a terminal hydride intermediate confirmed by in situ NMR spectroscopy and deuterium labeling with D 2 . The connectivity and structural parameters of this hydride intermediate, [UH(NP*) 3 ], which rapidly thermally decomposes to the homoleptic complex, [U(NP*) 4 ], can be confirmed by single-crystal X-ray diffraction studies of a crystal grown by chilling the reaction mixture. The identity of [U(NP*) 4 ] was confirmed by its direct, bulk synthesis from [U(Me)(NP*) 3 ] and HNP* in a protonolysis reaction.

Alkyls↗
NASA NTRS2000

The Role of Electrolyte Upon the SEI Formation Characteristics and Low Temperature Performance of Lithium-Ion Cells With Graphite Anodes

Quarternary lithium-ion battery electrolyte solutions containing ester co-solvents in mixtures of carbonates have been demonstrated to have high conductivity at low temperatures (< -20C). However, in some cases the presence of such co-solvents does not directly translate into improved low temperature cell performance, presumably due to the formation of ionically resistive surface films on carbonaceous anodes. In order to understand this behavior, a number of lithium-graphite cells have been studied containing electrolytes with various ester co-solvents, including methyl acetate (MA), ethyl acetate (EA), ethyl propionate (EP), and ethyl butyrate (EB). The charge/discharge characterization of these cells indicates that the higher molecular weight esters result in electrolytes which possess superior low temperature performance in contrast to the lower molecular weight ester-containing solutions, even though these solutions display lower conductivity values.

Smart, M. C.↗
DOE OSTI2020

Compositions and Formation Mechanisms of Solid-Electrolyte Interphase on Microporous Carbon/Sulfur Cathodes

We report the formation mechanism and compositions of a solid-electrolyte interphase (SEI) on a microporous carbon/sulfur (MC/S) cathode in Li–S batteries using a carbonate-based electrolyte (1 M LiPF 6 in ethylene carbonate (EC)/dimethyl carbonate, v:v = 1:1). Through characterizations using 1D and 2D solution-phase nuclear magnetic resonance spectroscopy, coupled with model chemical reactions and DFT calculations, we have identified two critical roles of Li + in steering the SEI formation. First, the preferential solvation of Li + by EC in the mixed carbonate electrolyte renders EC as the dominant participant in the SEI formation, and second, Li + coordination to the EC carbonyl alters activation barriers and changes the reaction pathways relative to Na + . The main organic components in the SEI are identified as lithium ethylene monocarbonate and lithium methyl carbonate, which are virtually identical to those formed on Li and graphite anodes of lithium-ion batteries but via a different pathway.

25 ENERGY STORAGE↗
DOE OSTI2022

Electronic Absorption Spectroscopy and Photochemistry of Criegee Intermediates

Interest in Criegee intermediates (CIs), often termed carbonyl oxides, and their role in tropospheric chemistry has grown massively since the demonstration of laboratory-based routes to their formation and characterization in the gas phase. This article reviews current knowledge regarding the electronic spectroscopy of atmospherically relevant CIs like CH 2 OO, CH 3 CHOO, (CH 3 ) 2 COO and larger CIs like methyl vinyl ketone oxide and methacrolein oxide that are formed in the ozonolysis of isoprene, and of selected conjugated carbene-derived CIs of interest in the synthetic chemistry community. Of the aforementioned atmospherically relevant CIs, all except CH 2 OO and (CH 3 ) 2 COO exist in different conformers which, under tropospheric conditions, can display strikingly different thermal loss rates via unimolecular and bimolecular processes. Calculated photolysis rates based on their absorption properties suggest that solar photolysis will rarely be a significant contributor to the total loss rate for any CI under tropospheric conditions. Nonetheless, there is ever-growing interest in the absorption cross sections and primary photochemistry of CIs following excitation to the strongly absorbing 1 ππ* state, and how this varies with CI, with conformer and with excitation wavelength. Furthermore, the later part of this review surveys the photochemical data reported to date, including a range of studies that demonstrate prompt photo-induced fission of the terminal O–O bond, and speculates about possible alternate decay processes that could occur following non-adiabatic coupling to, and dissociation from, highly internally excited levels of the electronic ground state of a CI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Continuum-Level Modeling of Li-Ion Battery SEI by Upscaling Atomistically Informed Reaction Mechanisms

Understanding and controlling solid-electrolyte interphase (SEI) formation to stabilize cell performance is a significant challenge for next-generation Li-ion battery technologies. In recent years, computational modeling has become an essential tool in providing fundamental insights into SEI properties and dynamics. However, neither atomistic nor continuum-level approaches alone can capture the complexities of SEI chemistry across all relevant length and time scales. In this work, a continuum-level model is developed that is informed by reaction mechanisms obtained from first-principle calculations. The atomistically informed continuum-level model is used to understand electrolyte degradation, including the decomposition of ethylene carbonate (EC), ethyl methyl carbonate (EMC), and fluoroethylene carbonate (FEC). The model presented here is the most chemically complex continuum-level SEI model in the literature to date. The SEI model is calibrated against experimental irreversible leakage currents and shows qualitative agreement with expected SEI growth trends. The model framework is expected to accelerate fundamental understanding of SEI formation, facilitate mechanism development feedback, and dynamically interact with experimental insights.

continuum-level model↗
DOE OSTI2025

Enantioselective Hydrodifluoroalkylation of Alkenes with Conformationally Tuned Peptidyl Hydrogen Atom Transfer Catalysts

Here, we report the enantioselective hydrodifluoroalkylation of alkenes proceeding via an asymmetric hydrogen atom transfer (HAT) event catalyzed by thiol-containing tetrapeptides. Photocatalytic generation of a difluoroacetyl radical followed by carbon–carbon bond formation results in a prochiral carbon-centered radical that engages with the chiral catalyst. A trialkylamine reductant is proposed to turn over the catalyst in this net-reductive transformation. Notably, incorporating an (S)-β-methyl-substituted cysteine as the N-terminal residue improved selectivity relative to that of the native N-terminal cysteine (Cys) residue, and X-ray crystallographic analysis supports the conformational underpinning of this effect. A range of enantioenriched γ-substituted amides were synthesized in up to a 96:4 enantiomeric ratio, demonstrating the broad functional group tolerance of this method. Models accounting for asymmetric induction are proposed with supporting DFT calculations.

08 HYDROGEN↗
DOE OSTI2024

Metabolic engineering of Caldicellulosiruptor bescii for 2,3-butanediol production from unpretreated lignocellulosic biomass and metabolic strategies for improving yields and titers

ABSTRACT The platform chemical 2,3-butanediol (2,3-BDO) is used to derive products, such as 1,3-butadiene and methyl ethyl ketone, for the chemical and fuel production industries. Efficient microbial 2,3-BDO production at industrial scales has not been achieved yet for various reasons, including product inhibition to host organisms, mixed stereospecificity in product formation, and dependence on expensive substrates (i.e., glucose). In this study, we explore engineering of a 2,3-BDO pathway inCaldicellulosiruptor bescii, an extremely thermophilic (optimal growth temperature = 78°C) and anaerobic bacterium that can break down crystalline cellulose and hemicellulose into fermentable C 5 and C 6 sugars. In addition, C. besciigrows on unpretreated plant biomass, such as switchgrass. Biosynthesis of 2,3-BDO involves three steps: two molecules of pyruvate are condensed into acetolactate; acetolactate is decarboxylated to acetoin, and finally, acetoin is reduced to 2,3-BDO.C. besciinatively produces acetoin; therefore, in order to complete the 2,3-BDO biosynthetic pathway,C. besciiwas engineered to produce a secondary alcohol dehydrogenase (sADH) to catalyze the final step. Two previously characterized, thermostable sADH enzymes with high affinity for acetoin, one from a bacterium and one from an archaeon, were tested independently. When either sADH was present inC. bescii,the recombinant strains were able to produce up to 2.5-mM 2,3-BDO from crystalline cellulose and xylan and 0.2-mM 2,3-BDO directly from unpretreated switchgrass. This serves as the basis for higher yields and productivities, and to this end, limiting factors and potential genetic targets for further optimization were assessed using the genome-scale metabolic model ofC. bescii. IMPORTANCE Lignocellulosic plant biomass as the substrate for microbial synthesis of 2,3-butanediol is one of the major keys toward cost-effective bio-based production of this chemical at an industrial scale. However, deconstruction of biomass to release the sugars for microbial growth currently requires expensive thermochemical and enzymatic pretreatments. In this study, the thermo-cellulolytic bacteriumCaldicellulosiruptor besciiwas successfully engineered to produce 2,3-butanediol from cellulose, xylan, and directly from unpretreated switchgrass. Genome-scale metabolic modeling ofC. besciiwas applied to adjust carbon and redox fluxes to maximize productivity of 2,3-butanediol, thereby revealing bottlenecks that require genetic modifications.

Biotechnology & Applied Microbiology↗
DOE OSTI2022

Terminal and Super‐Basic Parent Imides of Hafnium

Abstract A dinuclear hafnium complex containing the parent imido ligand [(PN)(PNC)Hf=NH{μ 2 ‐K}] 2 ( 2 ) (PN − =(N‐(2‐P i Pr 2 ‐4‐methylphenyl)‐2,4,6‐Me 3 C 6 H 2 ; PNC 2− =(N‐(2‐P i Pr 2 ‐4‐methylphenyl)‐2,4,6‐CH 2 Me 2 C 6 H 2 ), was prepared by reduction of the bisazide trans‐[(PN) 2 Hf(N 3 ) 2 ] ( 1 ) with two equiv of KC 8 . Encapsulation of K + in 2 with crown‐ether or cryptand affords the first discrete salt [K(encap)][(PN)(PNC)Hf≡NH] (encap=18‐crown‐6(THF) 2 , 3 ; 2,2,2‐Kryptofix, 4 ), featuring a terminal parent imide and possessing some of the shortest Hf−N bond lengths known to date. DFT calculations revealed formation of 2 to proceed via an extremely basic monomeric nitrido, [(PN) 2 Hf≡N] − ( A ), having a computed p K BH+ of ∼57 followed by heterolytic splitting of an inert 1,2‐CH bond of a benzylic methyl group across the Hf≡N triple bond in A . An electronic structure analysis reveals A to possess a covalent Hf≡N triple bond and of super‐basic character. We also showcase reactivity of the Hf≡NH bond with various electrophiles.

Chemistry↗
DOE OSTI2022

Polymerizations of 2-(Trimethylsilyl)ethanesulfonyl-activated aziridines

A novel N-sulfonyl aziridine, N-((2-(trimethylsilyl)ethyl)sulfonyl)-2-methyl-aziridine (SES-MeAz) was synthesized, and its controlled anionic ring-opening polymerization to form poly(SES-MeAz) studied. The desulfonylation of poly(SES-MeAz)s can be achieved under mild conditions, with tetrabutylammonium fluoride (TBAF) to form polypropylene imine (PPI), although purification of the PPI was not completely successful. The block copolymer p(pTs-MeAz)-b-p(SES-MeAz), (pTs-MeAz = N-para-tosyl-2-methyl-aziridine) was prepared by a sequential polymerization. The desulfonylation of the block copolymer is the first example of the selective removal of a sulfonyl protecting group from a poly(sulfonylazirdine) block copolymer and this is the first formation of a polysufonylaziridine-block-polypropylene imine copolymer. Three-armed star-shaped poly(SES-MeAz)s were also successfully synthesized and exhibited improved solubility compared with linear poly(SES-MeAz)s.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nanoscale Miscibility in In Situ Polymerized Hybrid Electrolytes Speeds Up Ion Dynamics and Enables Stable Cycling of Li Metal Batteries

While the potential use of copolymerized electrolytes in Li metal batteries is subject to intense investigation, the fundamental understanding of the nanoscale domain formation and its effect on Li + transport is still lacking. In this study, we investigated the correlation between the Li + transport mechanism and the miscibility of monomers in polymer blend electrolytes derived from the in situ copolymerization of methyl methacrylate (MMA) and vinylene carbonate (VC) in the presence of polyethylene glycol dimethyl ether (PEGDME) plasticizer and bis(trifluoromethanesulfonyl)imide (LiTFSI) salt. The addition of a polar short chain plasticizer reduced the dynamic and structural heterogeneities of the electrolyte. Small-angle X-ray scattering (SAXS) measurements and coarse-grained molecular dynamics (MD) simulations were used to investigate the nanoscale structure of the electrolytes. The distribution of relaxation times corresponding to the three distinct diffusion mechanisms of the free and interfacial Li + ions at the copolymer/plasticizer and electrolyte/SEI boundaries was analyzed in a broad temperature range to elucidate the Li + transport mechanism. Furthermore, the chemical composition of the SEI and the contribution of a ceramic lithium lanthanum zirconium oxide (LLZO, Li 7 La 3 Zr 2 O 12 ) phase on the interfacial resistance, salt degradation, and SEI stability were studied by X-ray photoelectron spectroscopy (XPS) depth profile analysis and electrochemical testing.

Li metal↗
DOE OSTI2020

ASSESSING FUEL PROPERTY EFFECTS ON CAVITATION AND EROSION PROPENSITY USING A COMPUTATIONAL FUEL SCREENING TOOL

To advance compression ignition combustion strategies, researchers have evaluated fuel property effects and their impact on achieving higher efficiencies and lower emissions levels relative to current capabilities. Within the Department of Energy's Co-Optima initiative, there has been a recent focus on understanding the influence of fuel properties on fuel injection performance. To help identify candidate fuels that can meet desired injector performance metrics, a computational fuel screening tool is under development that can link fuel properties with the tendency of a given fuel to cavitate and lead to cavitation-induced erosion. In the initial development of this tool, five liquid fuel properties were selected to represent candidate fuels, namely density, viscosity, vapor pressure, surface tension, and heat of vaporization. A design of experiments methodology was employed to generate a set of pseudo fuel cases, which can represent the main effects and interactions among the fuel properties and be related to cavitation erosion predictions. Large eddy simulations were performed using a mixture modeling approach to predict the cavitation and erosion propensity of these pseudo-fuels in terms of the mean fuel vapor mole fraction and stored impact energy from repeated cloud collapse events. The low order regression models generated from this study revealed the importance of liquid fuel density on cavitation formation, whereas liquid viscosity was found to have a strong negative correlation with erosion severity. The surrogate models were then used in the fuel screening tool to rank the cavitation and erosion tendency of four candidate single-component fuels: methyl decanoate, isooctane, ethanol and n-dodecane. While the fuel screening tool was not able to quantitatively predict the cavitation and erosion response metrics, the tool was able to accurately rank the relative cavitation and erosion propensity of the four fuels. Overall, ethanol and iso-octane were observed to produce the highest levels of cavitation and erosion, respectively.

cavitation-induced erosion↗
NASA NTRS2001

High T(g) Polyimides

The use of high temperature polymer matrix composites in aerospace applications has expanded steadily over the past 30 years, due to the increasing demand of replacing metal parts with light weight composite materials for fuel efficiency and bigger payloads in the aircraft and the space transportation vehicles. Polyimide/carbon fiber composites, especially, have been regarded as major high temperature matrix materials, based on their outstanding performance in terms of heat resistance, high strength-to-weight ratio and property retention compared with epoxies (177 C/350 F) and bismaleimides (232 C/450 F). Traditional, then-neoplastic polyimides were prepared from dianhydrides and diamines in N-methyl-2-pyrrolidinone (NMP) at room temperature to form the polyamic acids, which were then imidized at 150 C to yield polyimides. However, the high-boiling solvent (NMP, BP= 202 C) is very difficult to remove, leading to the formation of voids during composite fabrication. In the early 1970's, PMR addition curing polyimides with reactive endcaps were developed at the Lewis Research Center (renamed NASA Glenn) to ensure the easy processing of imide oligomers in methanol during composite fabrication.

Chuang, Kathy↗
NASA NTRS2002

Molecular modeling of interactions in electronic nose sensors for environmental monitoring

We report a study aimed at understanding analyte interactions with sensors made from polymer-carbon black composite films. The sensors are used in an Electronic Nose (ENose) which is used for monitoring the breathing air quality in human habitats. The model mimics the experimental conditions of the composite film deposition and formation and was developed using molecular modeling and simulation tools. The Dreiding 2.21 Force Field was used for the polymer and analyte molecules while graphite parameters were assigned to the carbon black atoms. The polymer considered for this work is methyl vinyl ether / maleic acid copolymer. The target analytes include both inorganic (NH3) and organic (methanol) types of compound. Results indicate different composite-analyte interaction behavior.

electronic noise polymer-carbon composite molecula↗
NASA NTRS2014

Magnetite as Possible Template for the Synthesis of Chiral Organics in Carbonaceous Chondrites

The main goal of the Japanese Aerospace Ex-ploration Agency (JAXA) Hayabusa-2 mission is to visit and return to Earth samples of a C-type asteroid (162173) 1999 JU3 in order to understand the origin and nature of organic materials in the Solar System. Life on Earth shows preference towards the set of organics with particular spatial arrangements, this 'selectivity' is a crucial criterion for life. With only rare exceptions, life 'determines' to use the left- (L-) form over the right- (D-) form of amino acids, resulting in a L-enantiomeric excess (ee). Recent studies have shown that L-ee is found within the alpha-methyl amino acids in meteorites [1, 2], which are amino acids with rare terrestrial occurrence, and thus point towards a plausible abiotic origin for ee. One of the proposed origins of chiral asymmetry of amino acids in meteorites is their formation with the presence of asymmetric catalysts [3]. The catalytic mineral grains acted as a surface at which nebular gases (CO, H2 and NH3) were allowed to condense and react through Fisher Tropsch type (FTT) syntheses to form the organics observed in meteorites [4]. Magnetite is shown to be an effective catalyst of the synthesis of amino acids that are commonly found in meteorites [5]. It has also taken the form as spiral magnetites (a.k.a. 'plaquettes'), which were found in various carbonaceous chondrites (CCs), including C2s Tagish Lake and Esseibi, CI Orgueil, and CR chondrites [e.g., 6, 7, 8]. In addition, L-ee for amino acids are common in the aqueously altered CCs, as opposed to the unaltered CCs [1]. It seems possible that the synthesis of amino acids with chiral preferences is correlated to the alteration process experienced by the asteroid parent body, and related to the configuration of spiral magnetite catalysts. Since C-type asteroids are considered to be enriched in organic matter, and the spectral data of 1999 JU3 indicates a certain de-gree of aqueous alteration [9], the Hayabusa-2 mission serves as a perfect chance to attest this argument. In order to understand the distribution of spiral magnetites among different meteorite classes, as well as to investigate their spiral configurations and correlation to molecular asymmetry, we observed polished thin sections of CCs using scanning electron microscope (SEM) imaging. Individual magnetite grains were picked, embedded in epoxy, thin-sectioned using an ultra-microtome, and studied with electron backscatter diffraction (EBSD) in order to reconstruct the crystal orientation along the stack of magnetite disks.

Chan, Q. H. S.↗
NASA NTRS1994

Reaction and Protection of Electrical Wire Insulators in Atomic-oxygen Environments

Atomic-oxygen erosion on spacecraft in low Earth orbit is an issue which is becoming increasingly important because of the growing number of spacecraft that will fly in the orbits which have high concentrations of atomic oxygen. In this investigation, the atomic-oxygen durability of three types of electrical wire insulation (carbon-based, fluoropolymer, and polysiloxane elastomer) were evaluated. These insulation materials were exposed to thermal-energy atomic oxygen, which was obtained by RF excitation of air at a pressure of 11-20 Pa. The effects of atomic-oxygen exposure on insulation materials indicate that all carbon-based materials erode at about the same rate as polyamide Kapton and, therefore, are not atomic-oxygen durable. However, the durability of fluoropolymers needs to be evaluated on a case by case basis because the erosion rates of fluoropolymers vary widely. For example, experimental data suggest the formation of atomic fluorine during atomic-oxygen amorphous-fluorocarbon reactions. Dimethyl polysiloxanes (silicone) do not lose mass during atomic-oxygen exposure, but develop silica surfaces which are under tension and frequently crack as a result of loss of methyl groups. However, if the silicone sample surfaces were properly pretreated to provide a certain roughness, atomic oxygen exposure resulted in a sturdy, non-cracked atomic-oxygen durable SiO2 layer. Since the surface does not crack during such silicone-atomic oxygen reaction, the crack-induced contamination by silicone can be reduced or completely stopped. Therefore, with proper pretreatment, silicone can be either a wire insulation material or a coating on wire insulation materials to provide atomic-oxygen durability.

Hung, Ching-Cheh↗
DOE OSTI2020

A Pd III Sulfate Dimer Initiates Rapid Methane Monofunctionalization by H Atom Abstraction

An electrogenerated Pd III 2 species in fuming sulfuric acid is competent for rapid and concurrent methane monohydroxylation to methyl bisulfate (CH 3 OSO 3 H) and methane sulfonation to methanesulfonic acid (CH 3 SO 3 H). In situ NMR at 50 °C is used to track methane transformation exclusively to CH 3 OSO 3 H and CH 3 SO 3 H at high conversions. Integrating a set of kinetic and computational studies, the mechanism of methane monofunctionalization by Pd III 2 is examined. Here, experimental rate laws and common kinetic isotope effects for CH 3 OSO 3 H and CH 3 SO 3 H formation suggest that both transformations proceed via a common rate-limiting C-H activation step. Introduction of O 2 or Pd II,III 2 suppresses CH 3 SO 3 H generation, indicating a radical chain sequence. Although the metal-metal bonded Pd III 2 complex is a net two-electron oxidant, our aggregate kinetic data point to a mechanistic model that features rate-limiting H atom abstraction by the Pd III 2 complex to generate a methyl radical intermediate. The CH 3 • intermediate then recombines with Pd II,III 2 to furnish a CH 3 Pd III 2 intermediate that reductively eliminates CH 3 OSO 3 H. Alternatively, the CH 3 intermediate can enter a chain reaction with SO 3 to generate CH 3 SO 3 H. DFT computations support the radical-based C-H activation by Pd III 2 and delineate H atom abstraction pathways with computed reaction barriers and kinetic isotope effects (KIEs) that are consistent with experimental data. These mechanistic investigations challenge the paradigm of electrophilic C-H activation and highlight H atom abstraction as a potent pathway for selective methane C-H oxidative functionalization at high reaction rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Blended fuel property analysis of butyl-exchanged polyoxymethylene ethers as renewable diesel blendstocks

Methyl-terminated polyoxymethylene ethers (MM-POMEs), having the formula CH 3 O-(CH 2 O)n-CH 3 (n = 3-6), are a class of oxygenates with desirable diesel-like fuel properties including high cetane number and low soot formation. However, their low energy density and high water-solubility present barriers to their adoption. Both concerns were recently addressed by our research group by synthesizing a mixture of POME structures having butyl end-groups and n = 1-6, termed B*POME1-6. B*POME1-6 maintained the advantageous properties of the parent MM-POMEs, and exhibited improved energy density and most notably, dramatically decreased water solubility. For evaluation against a set of criteria for a blended diesel blendstock, a 20 vol% blend of B*POME1-6 with a base diesel fuel was investigated here. Oxidation stability, cetane number, sooting tendency, lubricity and conductivity were improved in the B*POME1-6 blend compared with the base diesel, while also maintaining the flash point, cloud point, energy density, viscosity, and boiling point requirements. The B*POME1-6 product demonstrated a synergistic blending behavior at 10 vol% and a linear blending behavior at 20-30 vol% blends, in agreement with similar POME blends at comparable blend levels. Finally, common environmental and toxicity models performed on B*POME1-6 component molecules suggested they have a greater propensity to partition into the water compartment compared to a common diesel surrogate, but with a lower tendency to bioaccumulate.

33 ADVANCED PROPULSION SYSTEMS↗