Search NASA⌕ Search

SEARCH · Search NASA

Results for “NASA SPACE RADIATION LABORATORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Capillary Pumped Loop 3 Flight Experiment Overview

The Capillary Pumped Loop 3 (CAPL 3) Experiment is a follow on to the CAPL 1 and CAPL 2 experiments which flew on STS-60 (2/94) and STS-69 (9/95), respectively. CAPL 3 is tentatively scheduled to fly on the Space Shuttle in late 2000 as part of the Hitchhiker Experiments Advancing Technology (HEAT) payload. The experiment is a joint Naval Research Laboratory (NRL)/Goddard Space Flight Center (GSFC) payload which will meet technology objectives for both the Department of Defense and NASA. The primary objective of CAPL 3 is to demonstrate in space a multiple evaporator capillary pumped loop system, capable of reliable start-up, reliable continuous operation, and at least 50% heat load sharing with hardware for a deployable radiator. CAPL 3 is a full scale CPL system with four parallel capillary evaporators. The loop also contains a capillary starter pump, 8 parallel direct condensation condensers with associated flow regulators, a back pressure regulator, a two-phase reservoir, and various headers and transport tubing. A variable conductance heat pipe is located between one of the evaporators and the experiment radiator to provide a cooling source for the demonstration of heat load sharing. The experiment has an operating power range of 100 W to approximately 1400 W. The experiment ammonia charge will cause it to transition to a fixed conductance mode of operation if the radiator usage reaches 85%. Ambient functional tests have been performed on the experiment. Tests performed included start-up, low power, power cycles, high power, heat load sharing, variable/fixed conductance transition, saturation temperature changes, and pressure primes while the system was operating. The majority of the testing was performed at an ammonia saturation temperature of 30C, but a few tests were done at temperatures above and below this. The testing was highly successful. Details of the tests performed and a discussion of the results will be given in the presentation.

Ottenstein, Laura↗

Long-Term Total Solar Irradiance (TSI) Variability Trends: 1984-2004

The incoming total solar irradiance (TSI), typically referred to as the solar constant, is being studied to identify long-term TSI changes, which may trigger global climate changes. The TSI is normalized to the mean earth-sun distance. Studies of spacecraft TSI data sets confirmed the existence of 0.1 %, long-term TSI variability component with a period of 10 years. The component varied directly with solar magnetic activity associated with recent 10-year sunspot cycles. The 0.1 % TSI variability component is clearly present in the spacecraft data sets from the 1984-2004, Earth Radiation Budget Experiment (ERBE) active cavity radiometer (ACR) solar monitor; 1978-1993, Nimbus-7 HF; 1980-1989, Solar Maximum Mission [SMM] ACRIM; 1991-2004, Upper Atmosphere Research Satellite (UARS) ACRIM; 1996-2003, Solar and Heliospheric Observatory (SOHO)/VIRGO, Space Science (ATLAS), 2000-2004, ACRIMSAT; and 2003-2004 SOlar Radiation and Climate Experiment (SORCE) active cavity radiometer (ACR) missions. From October 1984, through March 2004, the ERBS/ERBE solar monitor was used to produce the longest continuous data set of total solar irradiance (TSI) variability measurements. The solar monitor is located on Shuttle Atmospheric Laboratory for Applications and the NASA Earth Radiation Budget Satellite (ERBS). Maximum TSI values occurred during the 1989-1991, and 1998-2002, time frames; while minimum [quiet sun] TSI levels occurred during 1986 and 1996. Recent ERBS measurements indicate that the TSI is decreasing to forecasted, minimum levels by 2006. Using the discontinuous non-operational Nimbus-7, SMM ACRIM, and UARS ACRIM mission TSI data sets, Wilson and Mordvinor (2003) suggested the existence of an additional long-term TSI variability component, 0.05 %, with a period longer than a decade. Analyses of the ERBS/ERBE data set do not support the Wilson and Mordvinor analyses approach because it used the Nimbus-7 data set which exhibited a significant ACR response shift of 0.7 Wm-2

Lee, Robert Benjamin, III↗

Electron Impact Excitation Cross Section Measurement for n=3 to n=2 Line Emission in Fe(17+) to Fe(23+)

We have measured the electron impact excitation cross sections for the strong iron L-shell 3 --> 2 lines of Fe XVIII to Fe XXIV at the EBIT-I electron beam ion trap using a crystal spectrometer and NASA-Goddard Space Flight Centers 6 x 6 pixel array microcalorimeter. The cross sections were determined by direct normalization to the well established cross section of radiative electron capture through a sophisticated model analysis which results in the excitation cross section for the strong Fe L-shell lines at multiple electron energies. This measurement is part of a laboratory X-ray astrophysics program utilizing the Livermore electron beam ion traps EBIT-I and EBIT-II.

Chen, H.↗

ORNL automates key process in plutonium-238 production

Oak Ridge National Laboratory scientists have automated part of the process of producing plutonium-238, which is used by NASA to fuel deep space exploration. Resolving this key bottleneck will help boost annual production of the radioisotope towards NASA’s goal of 1.5 kilograms of Pu-238 per year by 2025.

07 ISOTOPE AND RADIATION SOURCES↗

Summary and Recommendations for Future Work

The safety of astronauts is the primary concern of all space missions. Space radiation has been identified as a major concern for ISS, and minimizing radiation risks during EVA is a principle component of NASA s radiation protection program. The space suit plays a critical role in shielding astronauts from EVA radiation exposures. In cooperation with the JSC Extravehicular Activity Project Office, and the Space Radiation Health Project Office, the NASA EMU and RSA Orlan space suits were taken to the LLUPTF for a series of measurements with proton and electron beams to simulate exposures during EVA operations. Additional tests with material layouts of the EMU suit sleeve were made in collaboration with NASA LaRC at the LBNL 88-inch cyclotron and at the Brookhaven National Laboratory Alternating Gradient Synchrotron.

Cucinotta, Francis A.↗

A review of NASA fiber optics tasks

The status of on-going NASA tasks involving fiber optic data transmission, and related topics is given. Ground based applications, including a multiplexed wideband 2 km prototype link and a building-to-building video link, are described. In connection with the use of fibers in space, the effects to be expected from the space environment are touched on, particularly radiation darkening of fibers and temperature effects. Laboratory results on performance of fibers at cryogenic temperatures are also presented. Finally, some thoughts on future applications are given.

Johnston, A. R.↗

Enigmatic Isovaline: Investigating the Stability, Racemization, and Formation of a Non-biological Meteoritic Amino Acid

Among the Murchison meteoritic amino acids, isovaline stands out as being both nonbiological (non-protein) and having a relatively high abundance. While approximately equal amounts of D- and L-isovaline have been reported in Murchison and other CM meteorites, the molecule's structure appears to prohibit its racemization in aqueous solutions. We recently have investigated the low-temperature solid-phase chemistry of both isovaline and valine with an eye toward each molecule's formation, stability, and possible interconversions of D and L enantiomers. Ion-irradiated isovaline- and valinecontaining ices were examined by IR spectroscopy and highly-sensitive liquid chromatography/time-of-flight mass spectral methods to assess both amino acid destruction and racemization. Samples were studied in the presence and in the absence of water-ice, and the destruction of both isovaline and valine was measured as a function of radiation dose. In addition, we have undertaken experiments to synthesize isovaline, valine, and their amino acid isomers by solid-phase radiation-chemical pathways other than the oft-invoked Strecker process. This presentation will review and summarize some of our recent findings. -- Our work has been supported by a grant to the Goddard Center for Astrobiology through the NASA Astrobiology Institute. Experiments were performed in the Cosmic Ice Laboratory (RLH, MHM, AL) and the Astrobiology Analytical Laboratory (JPD, DPG) at the NASA Goddard Space Flight Center.

Hudson, Reggie↗

All-Metal Dual Frequency RHCP High Gain Antenna for the Extreme Environments of a Potential Europa Lander

A new all-metal dual-frequency RHCP high gain antenna is under development at NASA’s Jet Propulsion Laboratory for a potential Europa Lander. The antenna is mainly made of metal so it could survive the harsh environment conditions (i.e. very low temperature and high radiation and ESD levels). The antenna is also flat to meet drastic volume constraints and has efficiencies higher than 80% at both the uplink and downlink X-band Deep Space frequency bands. This antenna is a key component for the potential mission enabling Direct Link to Earth (DTE) from and Direct-from-Earth (DFE) to the lander without any relay.

Estabrook, Polly↗

Large all-Metal Dual-Frequency Circularly Polarized High Gain Antenna for potential Europa Lander

A new all-metal dual-frequency RHCP high gain antenna is under development at NASA’s Jet Propulsion Laboratory for a potential Europa Lander. The antenna is mainly made of metal so it could survive the harsh environment conditions (i.e. very low temperature and high radiation and ESD levels). The antenna is also flat to meet drastic volume constraints and has efficiencies higher than 80% at both the uplink and downlink X-band Deep Space frequency bands. This antenna is a key component for the potential mission enabling Direct Link to Earth (DTE) from and Direct-from-Earth (DFE) to the lander without any relay.

Estabrook, Polly↗

Laboratory Measurements of Optical Properties of Micron Size Individual Dust Grains

A laboratory program is being developed at NASA Marshall Space Flight Center for experimental determination of the optical and physical properties individual dust grains in simulated astrophysical environments. The experimental setup is based on an electrodynamic balance that permits levitation of single 0.1 - 10 micron radii dust grains in a cavity evacuated to pressures of approx. 10(exp -6) torr. The experimental apparatus is equipped with observational ports for measurements in the UV, visible, and infrared spectral regions. A cryogenic facility for cooling the particles to temperature of approx. 10-50K is being installed. The current and the planned measurements include: dust charging processes, photoelectric emissions and yields with UV irradiation, radiation pressure measurements, infrared absorption and scattering properties, and condensation processes, involving the analogs of cosmic dust grains. Selected results based on photoemissions, radiation pressure, and other laboratory measurements will be presented.

Abbas, M. M.↗

NISAR L-Band and S-Band Instrument Antennas: Compatibility Test and Results

Abstract—NASA ISRO SAR (NISAR) is one of the next major Earth science flight projects that NASA is currently developing in collaboration with ISRO, the Indian Space Research Organization. Featuring a 12m deployable off-set reflector, similar to SMAP but twice as large, and a dual band, dual polarization feed array, NISAR will measure with great accuracy even the smallest changes on our planet’s landmass, ice-sheet and forests over a 3 year period with a 12-day repeat cycle everywhere on the globe. Two radar systems will be sharing the same reflector, one operating in L-Band and one in S-Band. While the L-Band radar and feed antenna are being developed at Jet Propulsion Laboratory (JPL) for NASA, the S-Band feed antenna is under development at the Space Application Centre (SAC) in Ahmedabad, India, for ISRO. This paper describes the tests that were carried out both at JPL and SAC in order to verify that the level of compatibility between the two feed antennas were within the allocated requirements. Both S-parameters and radiation patterns were measured and compared with calculated predictions.

Harrell, Jefferson A.↗

All-metal dual frequency RHCP high gain antenna for the extreme environments of a potential Europa Lander

A new all-metal dual-frequency RHCP high gain antenna is under development at NASA’s Jet Propulsion Laboratory for a potential Europa Lander. The antenna is mainly made of metal so it could survive the harsh environment conditions of Europa (i.e. very low temperature and high radiation and ESD levels). The antenna is flat to meet drastic volume constraints and has efficiencies higher than 80% at both the uplink and downlink X-band Deep Space frequency bands. This antenna is a key component for the potential mission enabling Direct Link to Earth (DTE) without any relying on an Orbiter to relay the data.

Chahat, Nacer↗

Space Flight Qualification on a Multi-Fiber Ribbon Cable and Array Connector Assembly

NASA's Goddard Space Flight Center (GSFC) cooperatively with Sandia National Laboratories completed a series of tests on three separate configurations of multi-fiber ribbon cable and MTP connector assemblies. These tests simulate the aging process of components during launch and long-term space environmental exposure. The multi-fiber ribbon cable assembly was constructed of non-outgassing materials, with radiation-hardened, graded index 100/140-micron optical fiber. The results of this characterization presented here include vibration testing, thermal vacuum monitoring, and extended radiation exposure testing data.

Xiaodan, Linda Jin↗

Modular, Reconfigurable, High-Energy Technology Development

The Modular, Reconfigurable High-Energy (MRHE) Technology Demonstrator project was to have been a series of ground-based demonstrations to mature critical technologies needed for in-space assembly of a highpower high-voltage modular spacecraft in low Earth orbit, enabling the development of future modular solar-powered exploration cargo-transport vehicles and infrastructure. MRHE was a project in the High Energy Space Systems (HESS) Program, within NASA's Exploration Systems Research and Technology (ESR&T) Program. NASA participants included Marshall Space Flight Center (MSFC), the Jet Propulsion Laboratory (JPL), and Glenn Research Center (GRC). Contractor participants were the Boeing Phantom Works in Huntsville, AL, Lockheed Martin Advanced Technology Center in Palo Alto, CA, ENTECH, Inc. in Keller, TX, and the University of AL Huntsville (UAH). MRHE's technical objectives were to mature: (a) lightweight, efficient, high-voltage, radiation-resistant solar power generation (SPG) technologies; (b) innovative, lightweight, efficient thermal management systems; (c) efficient, 100kW-class, high-voltage power delivery systems from an SPG to an electric thruster system; (d) autonomous rendezvous and docking technology for in-space assembly of modular, reconfigurable spacecraft; (e) robotic assembly of modular space systems; and (f) modular, reconfigurable distributed avionics technologies. Maturation of these technologies was to be implemented through a series of increasingly-inclusive laboratory demonstrations that would have integrated and demonstrated two systems-of-systems: (a) the autonomous rendezvous and docking of modular spacecraft with deployable structures, robotic assembly, reconfiguration both during assembly and (b) the development and integration of an advanced thermal heat pipe and a high-voltage power delivery system with a representative lightweight high-voltage SPG array. In addition, an integrated simulation testbed would have been developed containing software models representing the technologies being matured in the laboratory demos. The testbed would have also included models for non-MRHE developed subsystems such as electric propulsion, so that end-to-end performance could have been assessed. This paper presents an overview of the MRHE Phase I activities at MSFC and its contractor partners. One of the major Phase I accomplishments is the assembly demonstration in the Lockheed Martin Advanced Technology Center (LMATC) Robot-Satellite facility, in which three robot-satellites successfully demonstrated rendezvous & docking, self-assembly, reconfiguration, adaptable GN&C, deployment, and interfaces between modules. Phase I technology maturation results from ENTECH include material recommendations for radiation hardened Stretched Lens Array (SLA) concentrator lenses, and a design concept and test results for a hi-voltage PV receiver. UAH's accomplishments include Supertube heatpipe test results, which support estimates of thermal conductivities at 30,000 times that of an equivalent silver rod. MSFC performed systems trades and developed a preliminary concept design for a 100kW-class modular reconfigurable solar electric propulsion transport vehicle, and Boeing Phantom Works in Huntsville performed assembly and rendezvous and docking trades. A concept animation video was produced by SAIC, wllich showed rendezvous and docking and SLA-square-rigger deployment in LEO.

Carrington, Connie↗

Active Dust Control and Mitigation Technology for Lunar and Martian Exploration

Mars is covered with a layer of dust that has been homogenized by global dust storms. Dust, levitated by these storms as well as by the frequent dust devils, is the dominant weather phenomenon on Mars. NASA's Mars exploration rovers have shown that atmospheric dust falling on solar panels can decrease their efficiency to the point of rendering the rover unusable. Dust covering the surface of the moon is expected to be electrostatically charged due to the solar wind, cosmic rays, and the solar radiation itself through the photoelectric effect. Electrostatically charged dust has a large tendency to adhere to surfaces. The Apollo missions to the moon showed that lunar dust adhesion can hinder manned and unmanned exploration activities. In this paper, we report on our efforts to develop and electrodynamic dust shield to prevent the accumulation of dust on surfaces and to remove dust already adhering to those surfaces. The technology uses electrostatic and dielectrophoretic forces to carry dust particles off surfaces and to generate an electrodynamic shield that prevents further accumulation of dust. The concept of the electrodynamic dust shield was introduced by NASA in the late 1960s and later reduced to practice during the 1970s for terrestrial applications. In 2003, our laboratory, in collaboration with several universities, applied this technology to space applications, specifically to remove dust from solar panels on Mars. We show how, with an appropriate design, we can prevent the electrostatic breakdown at the low Martian atmospheric pressures. We are also able to show that uncharged dust can be lifted and removed from surfaces under simulated Martian environmental conditions. We have also been able to develop a version of the electrodynamic dust shield working under hard vacuum conditions that simulate the lunar environment. We have implemented the electrodynamic dust shield on solar arrays, optical systems, spectrometers, viewports, thermal radiators, batteries, and power systems, as well as on fabrics for spacesuits. We present data on the design and optimization of the electrodynamic dust shields and provide data on the performance of the different implementations of the technology for lunar and Martian exploration activities.

Calle, C. I.↗

IYL Blog: Astronomers travel in time and space with light

As an astronomer, I use light to travel through the universe, and to look back in time to when the universe was young. So do you! All of us see things as they were when the light was emitted, not as they are now. The farthest thing you can easily see without a telescope is the Andromeda Nebula, which is a galaxy like the Milky Way, about 2.5 million light years away. You see it as it was 2.5 million years ago, and we really don't know what it looks like today; the disk will have rotated a bit, new stars will have been born, there could have been all kinds of exploding stars, and the black hole in the middle could be lighting up. People may be skeptical of the Big Bang theory, even though we have a TV show named for it, but we (I should say Penzias and Wilson) measured its heat radiation 51 years ago at Bell Telephone Labs in New Jersey. Their discovery marks the beginning of the era of cosmology as a measurement science rather than speculation. Penzias and Wilson received the Nobel Prize in 1978 for their finding, which had been predicted in 1948 by Alpher and Herman. By the way, heat radiation is just another form of light - we call it radiation because we can't see it, but it's exactly the same phenomenon of electromagnetic waves, and the only difference is the wavelength. In the old days of analog television, if you tuned your TV in between channels, about 1% of the snow that you could see came from the Big Bang. So when we look at the heat radiation of the early universe, we really are gazing right at what seems to us a cosmic fireball, which surrounds us completely. It's a bit of an illusion; if you can imagine what astronomers in other galaxies would see, they would also feel surrounded by the fireball, and they would also think they were in the middle. So from a mathematical version of imagination, we conclude that there is no observable center and no edge of our universe, and that the heat of the fireball fills the entire universe uniformly. Astronomers are also using light to find out whether we are alone in the universe. The Kepler observatory showed that thousands of stars blink a little when their orbiting planets pass between us and them, and other observatories use light to measure the wobble of stars as their planets pull on them. Eventually, we will find out whether planets like Earth have atmospheres like Earth's too - with water, carbon dioxide, oxygen, methane, and other gases that would be evidence of photosynthetic life. I think in a few decades we will have evidence that some planets do have life, and it will be done using light for remote chemical analysis. Also, astronomers at the SETI project are using light (long wavelength light we can pick up with radio telescopes) to look for signals from intelligent civilizations. That's a harder project because we don't know what to look for. But if we wanted to send signals all the way across the Milky Way, we could do it with laser beams, and if somebody over there knew what to look for, he or she could decode the message. On with the search! Dr. John C. Mather is a Senior Astrophysicist and is the Senior Project Scientist for the James Webb Space Telescope at NASA's Goddard Space Flight Center in Greenbelt, MD. His research centers on infrared astronomy and cosmology. With the Cosmic Background Explorer (COBE) team, he showed that the cosmic microwave background radiation has a blackbody spectrum within 50 parts per million, confirming the expanding universe model (aka the Big Bang Theory) to extraordinary accuracy, and initiating the study of cosmology as a precision science. The COBE team also made the first map of the hot and cold spots in the background radiation. The COBE maps have been confirmed and improved by two succeeding space missions, the Wilkinson Microwave Anisotropy Probe (WMAP, built by GSFC with Princeton University), and the Planck mission built by ESA. Based on these maps, astronomers have now developed a "standard model" of cosmology and have built detailed numerical simulations that begin to match Hubble observations, and require the existence of both "dark matter" and "dark energy", neither of which has been detected or deduced in laboratory experiments. Dr. Mather is the recipient of numerous awards, including the Nobel Prize in Physics (2006) with George Smoot, for the COBE work, and the NASA Distinguished Service Medal (2007). He is a member of many professional societies including the National Academy of Sciences and the American Academy of Arts and Sciences. Dr. Mather is now working with teams and committees to develop plans for a future great telescope capable of observing signs of life on planets orbiting other stars.

telescopes↗

NASA's plans for life sciences research facilities on a Space Station

A Life Sciences Research Facility on a Space Station will contribute to the health and well-being of humans in space, as well as address many fundamental questions in gravitational and developmental biology. Scientific interests include bone and muscle attrition, fluid and electrolyte shifts, cardiovascular deconditioning, metabolism, neurophysiology, reproduction, behavior, drugs and immunology, radiation biology, and closed life-support system development. The life sciences module will include a laboratory and a vivarium. Trade-offs currently being evaluated include (1) the need for and size of a 1-g control centrifuge; (2) specimen quantities and species for research; (3) degree of on-board analysis versus sample return and ground analysis; (4) type and extent of equipment automation; (5) facility return versus on-orbit refurbishment; (6) facility modularity, isolation, and system independence; and (7) selection of experiments, design, autonomy, sharing, compatibility, and integration.

Arno, R.↗

Specimens Prepared for Materials International Space Station Experiment

The Materials International Space Station Experiment (MISSE) is a materials flight experiment sponsored by the Materials and Manufacturing Directorate of the Air Force Research Laboratory at Wright-Patterson Air Force Base and the NASA Space Environmental Effects Program at the NASA Marshall Space Flight Center. MISSE is a cooperative effort among the Air Force, several NASA field centers, and industry. The experiment package will be placed on the exterior of the International Space Station in the summer of 2001. Approximately half of the specimens will be exposed to the space environment for 1 year, and the other half will be exposed for 3 years. The Electro-Physics Branch at the NASA Glenn Research Center has prepared and delivered over 150 specimens to be included in MISSE. Specimens include: 1) Double-coated polyimide Kapton to compare mass loss from in-space atomic oxygen undercutting erosion to ground-laboratory atomic oxygen undercutting erosion for predicting in-space durability; 2) Silicones to study changes in surface hardness and optical properties after combined atomic oxygen--ultraviolet radiation exposure for predicting in-space durability; 3) Forty-one different polymers to accurately measure their atomic oxygen erosion yields; 4) Scattering chambers to study atomic oxygen scattering characteristics that are relevant to the degradation found in spacecraft with exterior openings; 5) Thin polymer film disks and tensile specimens to study the effects of radiation on their optical properties and mechanical properties; 6) Lightweight intercalated graphite epoxy composites to study electromagnetic interference shielding performance; and 7) Polymer-based materials utilizing new atomic oxygen protection concepts to study their durability.

Banks, Bruce A.↗