Search NASA⌕ Search

SEARCH · Search NASA

Results for “Network structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Competing Effects of Network Architecture and Composition on Polydomain Liquid Crystal Elastomers

Main-chain liquid crystal elastomers (LCEs) are synthesized to investigate the interplay of the composition and network structure on LCE nematic-to-isotropic (N–I) transitions. We focus on networks synthesized from liquid crystalline oligomers reacted with tri- or tetrafunctional nonmesogenic cross-linker molecules. We find that coupling between mesogens and the polymer backbone increases with the degree of cross-linking. However, this enhanced coupling competes with mesogenic dilution arising from the cross-linker molecules to determine the N–I transition temperature (T NI ). When cross-linker molecules are dilute, the degree of cross-linking directly correlates to the change in T NI from the oligomer to LCE (ΔT NI ) through mesogen–backbone coupling. In this regime, ΔT NI ranges from 2.9 to 12.2 °C and 2.9–13.9 °C for tri- and tetrafunctional cross-linkers, respectively. At high cross-linker concentrations, deviations from this linear relationship appear. Further, the fractional mesogen content within an oligomer chain induces molecular weight-dependent mesogenic dilution effects arising from the flexible spacer molecules. Analysis of the N–I transition peak reveals a maximum latent heat per gram of mesogen (ΔH NI,mes ) for this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimating Internal Stress of an Alteration Layer Formed on Corroded Boroaluminosilicate Glass through Spectroscopic Ellipsometry Analysis

Aqueous corrosion of glass may result in the formation of an alteration layer in the glass surface of which chemical composition and network structure are different from those of the bulk glass. Since corrosion occurs far below the glass-transition temperature, the alteration layer cannot fully relax to the new structure with the lowest possible energy. Molecular dynamics simulations suggested that such a network will contain highly strained chemical bonds, which can be manifested as a stress in the alteration layer. Common techniques to measure stress in thin films or surface layers were found inadequate for thick monolithic glass samples corroded in water. Here, we explored the use of spectroscopic ellipsometry to test the presence of internal stress in the alteration layer formed by aqueous corrosion of glass. Furthermore, a procedure for analyses of spectroscopic ellipsometry data to determine birefringence in the alteration layer was developed. Findings with the established fitting procedure suggested that a stress builds up in the corroded surface layer of a boroaluminosilicate glass if there is a change in relative humidity, pH, or electrolyte concentration of the environment to which the glass surface is exposed. A similar process may occur in other types of glass, and it may affect the surface properties of corroded glass objects.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Confidence-Based Buffer for Strategic Deconfliction with Probabilistic Operational Intent

This paper presents a methodology to expand the 95% confidence level of the elliptical geometry given by Unmanned Aircraft System (UAS) operators planning to fly Beyond Visual Line of Sight (BVLOS) to any confidence level before being fed to the strategic deconfliction (SD) module, effectively increasing the separation buffer between Operational Intents (OIs). To assess the performance of this approach, it is integrated within an adaptation of the Rolling Horizon with K-Position Search volume-based strategic deconfliction approach, previously developed at NASA Ames, preventing the 4D overlapping of OIs shaped by ellipses instead of traditional blocks. Safety and efficiency metrics are evaluated through the deconfliction of four simulated package delivery route network structures across the San Francisco Metropolitan Area with increasing numbers of crossing waypoints (network complexity). Safety assessment entails the in-house creation of a metric to quantify collision occurrences per flight hour based on the frequency at which the probabilistic operational volume segments are sampled, whereas efficiency is measured using ground delay. Results indicate that the largest buffer growth occurs when increasing the confidence level beyond 99.9% and demonstrate the negative impact of network complexity on both metrics, regardless of the OI geometry. Further, the ellipse-based SD adaptation more accurately estimates temporal separation at crossings, allowing deconflicted vehicles to be closer together. It is concluded that the proposed methodology enables the desired confidence level to serve as an effective controller of buffer size.

strategic deconfliction↗

Confidence-Based Buffer for Strategic Deconfliction with Probabilistic Operational Intent

This paper presents a methodology to expand the 95% confidence level of the elliptical geometry given by Unmanned Aircraft System (UAS) operators planning to fly Beyond Visual Line of Sight (BVLOS) to any confidence level before being fed to the strategic deconfliction (SD) module, effectively increasing the separation buffer between Operational Intents (OIs). To assess the performance of this approach, it is integrated within an adaptation of the Rolling Horizon with K-Position Search volume-based strategic deconfliction approach, previously developed at NASA Ames, preventing the 4D overlapping of OIs shaped by ellipses instead of traditional blocks. Safety and efficiency metrics are evaluated through the deconfliction of four simulated package delivery route network structures across the San Francisco Metropolitan Area with increasing numbers of crossing waypoints (network complexity). Safety assessment entails the in-house creation of a metric to quantify collision occurrences per flight hour based on the frequency at which the probabilistic operational volume segments are sampled, whereas efficiency is measured using ground delay. Results indicate that the largest buffer growth occurs when increasing the confidence level beyond 99.9% and demonstrate the negative impact of network complexity on both metrics, regardless of the OI geometry. Further, the ellipse-based SD adaptation more accurately estimates temporal separation at crossings, allowing deconflicted vehicles to be closer together. It is concluded that the proposed methodology enables the desired confidence level to serve as an effective controller of buffer size.

safety↗

Structure characterization and oxidation mechanism study of porous biomorphic carbon template derived from basswood

A porous biomorphic carbon template (BCT), retained its biological feature, was prepared by carbonized basswood. Microstructure and component of BCT were performed by scanning electron microscope (SEM), energy dispersive spectrometry (EDS) and Raman spectroscopy. Non-isothermal oxidation mechanism of BCT was studied by thermogravimetry analysis (TGA). Experimental results show that BCT has a honeycomb structure and double-peaked porous diameter distribution. It is a typical turbostratic network structure, with increasing carbonization temperature, the ratio of the integrated intensities I{sub D}/I{sub G} increase, the lateral extension L{sub a} of the graphene units decrease. The non-isothermal oxidation mechanism of BCT exhibits a self-catalytic characteristic, which is explained by molecular structure schematic model.

36 MATERIALS SCIENCE↗

Dry-processed electrodes enabled by polytetrafluoroethylene fibrillation for high-performance lithium-ion batteries

The dry processing technique of polytetrafluoroethylene (PTFE) fibrillation offers significant advancements in cost reduction, environmental impact, and electrochemical performance. Dry processing alone allows for ∼ 20–60% cost reduction and increases of up to 40 mg cm⁻2 of areal loading – it typically comes at a reduction of rate capability. By leveraging the network structure of fibers, this method enhances rate capability and cycling performance, providing a compelling alternative to the conventional and currently predominant wet processing. The review delves into PTFE fibrillation mechanisms and examines critical influencing factors including material properties and processing parameters. It also discusses challenges associated with the electrodes fabricated by PTFE fibrillation, including structural instability due to insufficient PTFE fibrillization, compromised electrical conductivity from an insufficient conductive network, inhomogeneous dispersion resulting from the absence of solvents, restricted ionic transport due to increased electrode thickness, inadequate adhesion to current collector because of low surface energy of PTFE, electrochemical degradation due to low lowest unoccupied molecular orbital (LUMO) level of PTFE, particle damage during processing and environmental concerns related PTFE being a perfluoroalkyl and polyfluoroalkyl substances (PFAS). Recent research innovations aimed at mitigating these issues, their application in beyond-lithium batteries, and future research directions are thoroughly discussed.

Park, Hyunji↗

Characterizing Porous and Nonporous Phenolic Resins from Molecular Dynamics Simulations

Phenolic resins are an important component of many ablative heat shield materials, which protect spacecrafts from the extreme temperatures reached during atmospheric entry. Examples include the high-density Heritage Carbon Phenolic (HCP) used in the Pioneer-Venus and Galileo missions, as well as the low-density Phenolic Impregnated Carbon Ablator (PICA) used in the Mars Science Laboratory and Mars 2020 missions. Additionally, recent developments within NASA have produced the mid-density Heatshield for Extreme Entry Environment Technology (HEEET) and its derivative 3D Woven Mid-Density Carbon Phenolic (3MDCP). Unlike the nonporous phenolic in HCP, PICA and HEEET/3MDCP are fabricated by infusing preforms with diluted phenolic formulations to obtain a lower density porous matrix. Despite the importance of the phenolic phase to the material response during entry, the variation in properties of porous and nonporous phenolic is not well understood. Here, we present an investigation of porous and nonporous phenolic resins using molecular dynamics (MD) simulations. Resin cure is mimicked in the simulations through the inclusion of representative reaction templates to generate accurate models of the complex crosslinked structures. To create porous models, explicit solvent molecules are included during the cure simulations. We observe nanoscale separation of the phenolic and solvent phases, which results in significant differences in the final structures of porous and nonporous models. In addition to a quantitative assessment of the network structure and porosity, we elucidate the effects of the phenolic formulation on the final material properties. These results are compared with experimental data as appropriate.

phenolic↗

Alkaline earth-based coordination polymers derived from a cyclotriphosphazene-functionalized hexacarboxylate

Combination of hexakis(4-carboxylatephenoxy)cyclotriphosphazene with alkaline earth ions of increasing ionic radii (Mg{sup 2+}, Ca{sup 2+} and Ba{sup 2+}) under different solvothermal conditions yielded three new coordination polymers, and their crystal structures were determined by single-crystal X-ray diffraction analysis. The magnesium compound displays a three dimensional (3D) network structure constructed from the deprotonated ligand and the secondary building block Mg(COO){sub 4}, which can be rationalized as a (4,6)-connected topological net with the Schläfli symbol of (4{sup 4}·6{sup 2}){sub 3}(4{sup 9}·6{sup 6}){sub 2}. The calcium compound consists of 1D infinite “Ca-O” inorganic chains connected by the deprotonated ligands to from a 3D framework. The barium compound exhibits a 3D framework in which 1D “Ba-O” inorganic chains are connected together by the deprotonated organic linkers. Due to the semi-rigid nature, the ligand adopts distinctly different conformations in the three compounds. The metal ions’ influence exerted on the final structure of the resulting coordination polymers is also discussed. When the radii of alkaline earth ions increases descending down the group from Mg(II) to Ba(II), the coordination number becomes larger and more versatile: from 6 in the magnesium compound, to 6,7 and 10 in the calcium compound, and to 8 and 9 in the barium compound, thus substantially influencing the resulting final framework structures. Also, the photophysical properties were investigated systematically, revealing that the three compounds are photoluminscent in the solid state at room temperature. This work demonstrates that although the multiplicity of conformation in the hexacarboxylate ligand based on the inorganic scaffold cyclotriphosphazene makes it difficult to predict how this ligand will form extended network, but provides unique opportunities for the formation of diverse inorganic-organic hybrids exhibiting rich structural topologies. - Graphical abstract: Three alkaline earth-based coordination polymers were constructed from a semirigid cyclotriphosphazene-functionalized hexacarboxylate exhibiting different inorganic nodes as well as distinct ligand conformations relying on the metal ions, which presents the first example of such a ligand incorporated into alkaline earth–based coordination polymers. - Highlights: • Three alkaline earth-based coordination polymers were synthesized. • The three compounds exhibit different inorganic nodes and ligand conformations. • The three compounds are photoluminscent in the solid state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interplay between structure and transport properties of molten salt mixtures of ZnCl 2 –NaCl–KCl: A molecular dynamics study

In this paper, molten mixtures of network-forming covalently bonded ZnCl 2 and network-modifying ionically bonded NaCl and KCl salts are investigated as high-temperature heat transfer fluids for concentrating solar power plants. Specifically, using molecular dynamics simulations, the interplay between the extent of the network structure, composition, and the transport properties (viscosity, thermal conductivity, and diffusion) of ZnCl 2 –NaCl–KCl molten salts is characterized. The Stokes-Einstein/Eyring relationship is found to break down in these network-forming liquids at high concentrations of ZnCl 2 (>63 mol. %), while the Eyring relationship is seen with increasing KCl concentration. Further, the network modification due to the addition of K ions leads to formation of non-bridging terminal Cl ions, which in turn lead to a positive temperature dependence of thermal conductivity in these melts. Finally, this new understanding of transport in these ternary liquids enables the identification of appropriate concentrations of the network formers and network modifiers to design heat transfer fluids with desired transport properties for concentrating solar power plants.

14 SOLAR ENERGY↗

Development of Steady-State and Dynamic Mass and Energy Constrained Neural Networks for Distributed Chemical Systems Using Noisy Transient Data

The paper presents the development of algorithms for mass and energy constrained neural network models that can exactly conserve the overall mass and energy of distributed chemical process systems, even though the noisy transient data used for optimal model training violate the same. In contrast to approximately satisfying mass and energy balance constraints of a system by soft penalization of objective function, algorithms have been developed for solving equality-constrained nonlinear optimization problems, thus providing the guarantee of exactly satisfying the system mass and energy conservation laws. For developing dynamic mass-energy constrained network models for distributed systems, hybrid series and parallel dynamic-static neural networks have been leveraged. The developed algorithms for solving both the training and forward problems are validated using both steady-state and dynamic data in the presence of various noise characteristics. The developed data-driven algorithms are flexible to exactly satisfy mass and energy balance constraints for dynamic chemical processes if the system holdup information is available. The proposed network structures and algorithms are applied to the development of data-driven lumped and distributed models of an adiabatic superheater/reheater system, a nonisothermal continuous stirred tank reactor, as well as an electrically heated plug-flow reactor system where one form of energy gets transformed to another. It has been observed that the mass-energy constrained neural networks yield a root mean squared error of <1% with respect to the system truth for the case studies evaluated in this work.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ensembles of Networks Produced from Neural Architecture Search

Neural architecture search (NAS) is a popular topic at the intersection of deep learning and high performance computing. NAS focuses on optimizing the architecture of neural networks along with their hyperparameters in order to produce networks with superior performance. Much of the focus has been on how to produce a single best network to solve a machine learning problem, but as NAS methods produce many networks that work very well, this affords the opportunity to ensemble these networks to produce an improved result. Additionally, the diversity of network structures produced by NAS drives a natural bias towards diversity of predictions produced by the individual networks. This results in an improved ensemble over simply creating an ensemble that contains duplicates of the best network architecture retrained to have unique weights.

Herron, Emily↗

Transition of Blast Furnace Slag from Silicate Based to Aluminate Based: Density and Surface Tension

The effects of the Al{sub 2}O{sub 3} concentration and Al{sub 2}O{sub 3}/SiO{sub 2} ratio on the density and surface tension of molten aluminosilicate CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-9 mass pct MgO-1 mass pct TiO{sub 2} slag were investigated at temperatures from 1723 K to 1823 K (1450 °C to 1550 °C) using the Archimedean method and the maximum bubble pressure (MBP) technique, respectively. The mechanism of the changes in density and surface tension with composition was analyzed from the viewpoint of the degree of polymerization in the structure and the types of oxygen species in the melts. At a fixed CaO/SiO{sub 2} ratio of 1.20, the density decreased with increasing Al{sub 2}O{sub 3} content up to 25 mass pct, subsequently increasing. Increasing the Al{sub 2}O{sub 3}/SiO{sub 2} ratio from 0.47 to 0.92 caused an increase in the density at a fixed CaO content, and the density decreased slightly when the Al{sub 2}O{sub 3}/SiO{sub 2} ratio was greater than 0.92. Based on the structural information, the density decreased when the Al{sub 2}O{sub 3} content enhanced the network structure and increased when the (Q{sub 2} + Q{sub 3})/(Q{sub 0} + Q{sub 1}) ratio and structural complexity decreased. The surface tension increased with increasing Al{sub 2}O{sub 3} content and Al{sub 2}O{sub 3}/SiO{sub 2} ratio. On the one hand, the surface-active component of SiO{sub 2} decreased; on the other hand, the concentration of [AlO{sub 4}]{sup 5−} tetrahedra and metal cations that act as charge compensators increased at the melt surface. A model based on the anionic and cationic radii and the Butler equation was employed to predict the surface tension, and an iso-surface tension diagram was obtained at 1773 K (1500 °C).

36 MATERIALS SCIENCE↗

New interaction potentials for alkaline earth silicate and borate glasses

New interaction potentials were developed for molecular dynamics simulations to study the role of Mg and Ca in modifying the structure and properties of alkaline earth silicates and borates. Competition between the depolymerization of the silica network and the formation of new bonds between oxygen atoms and modifiers leads to the enhancement of the elastic moduli with increasing modifier content in alkaline earth silicate glasses. Compared with calcium silicate, the higher elastic moduli of magnesium silicate result from a higher connectivity of the overall glass network due to the incorporation of fourfold coordinated magnesium and a more rigid connection between oxygen atoms and modifiers. In contrast to the silicates, the effect of modifier on the elastic moduli of alkaline earth borates is dominated by the formation of fourfold coordinated boron (N 4 ). Calcium borate with higher N 4 shows a more rigid network structure and higher elastic moduli.

36 MATERIALS SCIENCE↗

Short-Term Forecasting of Thermostatic and Residential Loads Using Long Short-Term Memory Recurrent Neural Networks

Internet of Things (IoT) devices in smart grids enable intelligent energy management for grid managers and personalized energy services for consumers. Investigating a smart grid with IoT devices requires a simulation framework with IoT devices modeling. However, there lack comprehensive study on the modeling of IoT devices in smart grids. This paper investigates the IoT device modeling of a thermostatic load and implements the recurrent neural networks model for short-term load forecasting in this IoT-based thermostatic load. The recurrent neural network structure is leveraged to build a load forecasting model on temporal correlation. The temporal recurrent neural network layers including long short-term memory cells are employed to learn the data from both the simulation platform and New South Wales residential datasets. The simulation results are provided for demonstration.

electric load forecasting↗

Integration of magnetic bearings in the design of advanced gas turbine engines

Active magnetic bearings provide revolutionary advantages for gas turbine engine rotor support. These advantages include tremendously improved vibration and stability characteristics, reduced power loss, improved reliability, fault-tolerance, and greatly extended bearing service life. The marriage of these advantages with innovative structural network design and advanced materials utilization will permit major increases in thrust to weight performance and structural efficiency for future gas turbine engines. However, obtaining the maximum payoff requires two key ingredients. The first key ingredient is the use of modern magnetic bearing technologies such as innovative digital control techniques, high-density power electronics, high-density magnetic actuators, fault-tolerant system architecture, and electronic (sensorless) position estimation. This paper describes these technologies. The second key ingredient is to go beyond the simple replacement of rolling element bearings with magnetic bearings by incorporating magnetic bearings as an integral part of the overall engine design. This is analogous to the proper approach to designing with composites, whereby the designer tailors the geometry and load carrying function of the structural system or component for the composite instead of simply substituting composites in a design originally intended for metal material. This paper describes methodologies for the design integration of magnetic bearings in gas turbine engines.

Storace, Albert F.↗

MCS+: An Efficient Algorithm for Crawling the Community Structure in Multiplex Networks

In this article, we consider the problem of crawling a multiplex network to identify the community structure of a layer-of-interest. A multiplex network is one where there are multiple types of relationships between the nodes. In many multiplex networks, some layers might be easier to explore (in terms of time, money etc.). We propose MCS+, an algorithm that can use the information from the easier to explore layers to help in the exploration of a layer-of-interest that is expensive to explore. We consider the goal of exploration to be generating a sample that is representative of the communities in the complete layer-of-interest. This work has practical applications in areas such as exploration of dark (e.g., criminal) networks, online social networks, biological networks, and so on. For example, in a terrorist network, relationships such as phone records, e-mail records, and so on are easier to collect; in contrast, data on the face-to-face communications are much harder to collect, but also potentially more valuable. We perform extensive experimental evaluations on real-world networks, and we observe that MCS+ consistently outperforms the best baseline—the similarity of the sample that MCS+ generates to the real network is up to three times that of the best baseline in some networks. We also perform theoretical and experimental evaluations on the scalability of MCS+ to network properties, and find that it scales well with the budget, number of layers in the multiplex network, and the average degree in the original network.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Exact reconstruction of gene regulatory networks using compressive sensing

We consider the problem of reconstructing a gene regulatory network structure from limited time series gene expression data, without any a priori knowledge of connectivity. We assume that the network is sparse, meaning the connectivity among genes is much less than full connectivity. We develop a method for network reconstruction based on compressive sensing, which takes advantage of the network’s sparseness. For the case in which all genes are accessible for measurement, and there is no measurement noise, we show that our method can be used to exactly reconstruct the network. For the more general problem, in which hidden genes exist and all measurements are contaminated by noise, we show that our method leads to reliable reconstruction. In both cases, coherence of the model is used to assess the ability to reconstruct the network and to design new experiments. We demonstrate that it is possible to use the coherence distribution to guide biological experiment design effectively. By collecting a more informative dataset, the proposed method helps reduce the cost of experiments. For each problem, a set of numerical examples is presented. The method provides a guarantee on how well the inferred graph structure represents the underlying system, reveals deficiencies in the data and model, and suggests experimental directions to remedy the deficiencies.

59 BASIC BIOLOGICAL SCIENCES↗

Neural architecture search via similarity adaptive guidance

Evolutionary neural network architecture search (ENAS) has attracted the attention of many experts due to its global optimization capabilities to automatically search for convolutional neural network architectures based on the target task. The current search space for ENAS is not to design a fully structured network, but to search for smaller cell architectures to reduce search costs. However, blind search strategies do not effectively utilize the potential experience of the population. In order to utilize the potential experience learned by the current population to guide the evolutionary search of the population, we propose a similarity guided neural network architecture search algorithm based on cell architecture, which utilizes the similarity between pairwise architectures in the population as empirical knowledge learned by the population. Our proposed algorithm provides a novel method for calculating architecture similarity, which calculates architecture similarity separately from the cell and macro-structure. Then we decouple the connections and operations in the cell and calculate connection and operation similarity separately. In addition, we propose adaptive similarity selection and binary tournament selection strategies to enhance the algorithm’s global and local search capabilities and effectively explore the search space. Finally, we design an improved single-point crossover operator to enhance the local search ability of the evolutionary operator. The experimental results show that SAGNAS is a competitive algorithm that achieves 97.44% and 81.60% in CIFAR10 and CIFAR100 with only 1.9 GPU-days spent.

97 MATHEMATICS AND COMPUTING↗