Search NASA⌕ Search

SEARCH · Search NASA

Results for “News”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Niobium's intrinsic coherence length and penetration depth revisited using low-energy muon spin spectroscopy and secondary-ion mass spectrometry

Here, we report direct, simultaneous measurements of the London penetration depth (𝜆 𝐿 ) and Bardeen-Cooper-Schrieffer coherence length (𝜉 0 ) in oxygen-doped niobium, with impurity concentrations spanning the “clean” to “dirty” limits. Two depth-resolved techniques—low-energy muon spin spectroscopy and secondary-ion mass spectrometry—were used to quantify the element's Meissner screening profiles, analyzed within a framework that accounts for nonlocal electrodynamics. The analysis indicates intrinsic length scales of 𝜆 𝐿 = 29.1⁢ (10)⁢ nm and 𝜉 0 = 39.9 ⁢(25)⁢ nm, corresponding to a Ginzburg-Landau parameter 𝜅 = 0.70⁢ (5). The obtained 𝜆 𝐿 and 𝜅 values, accurately quantified at the nanoscale, are smaller than those commonly used in applications and modeling, and indicate that clean niobium lies at the boundary between type-I and type-II superconductivity, supporting the contemporary view that its intrinsic state may be type I.

Particle Accelerator↗
DOE OSTI2026

New framework for extracting GPDs from exclusive photon electroproduction

Recently, a new framework for studying generic 2 → 3 hard exclusive reactions, referred to as single-diffractive hard exclusive processes, has been introduced to provide a cleaner separation of the underlying physical mechanisms. In this work, we expand this formalism to the case of exclusive real-photon electroproduction off a nucleon, 𝑒⁡(ℓ) +𝑁⁡(𝑝) →𝑒⁡(ℓ′) +𝑁⁡(𝑝′) + 𝛾⁡(𝑞′), which represents the classical channel for accessing generalized parton distributions (GPDs) in nucleons and nuclei. This extension enables a more systematic and physically transparent formulation of the reaction dynamics, paving the way for improved extractions of GPDs from experimental data as compared to existing approaches.

Qiu, Jian-Wei [Thomas Jefferson National Accelerat↗
DOE OSTI2026

Accessing the gluon momentum fraction of nucleons through the gradient flow

We calculate the gluon momentum fraction of the nucleon using lattice QCD, with a nonperturbative renormalization technique based on the gradient flow. The gluon momentum fraction is determined on a single Wilson-clover ensemble using 𝑁 𝑓 =2 +1 flavors with pion mass 358 MeV and lattice spacing 0.094 fm. We employ the variational method to reduce excited-state contamination and apply the distillation framework to ensure a large operator basis. To reduce systematic uncertainties, we apply Bayesian model averaging to all fit procedures. We apply matching coefficients to the flow-time dependent lattice results to recover the gluon momentum fraction in the $\overline{MS}$-scheme at 2 GeV. Our final result is ⟨𝑥⟩ 𝑔 ⁢(𝜇 =2 GeV) =0.482⁢(35), where we quote only statistical uncertainties.

Lattice QCD↗
DOE OSTI2025

Strangeness in the proton from $W+$ charm production and SIDIS data

We perform a global QCD analysis of unpolarized parton distribution functions (PDFs) in the proton, including new 𝑊+⁢ charm production data from 𝑝⁢𝑝 collisions at the LHC and semi-inclusive pion and kaon production data in lepton-nucleon deep-inelastic scattering, both of which have been suggested for constraining the strange quark PDF. Compared with a baseline global fit that does not include these datasets, the new analysis reduces the uncertainty on the strange quark distribution over the range 0.01 < 𝑥 < 0.3, and provides a consistent description of processes sensitive to strangeness in the proton. Including the new datasets, the ratio of strange to nonstrange sea quark distributions is $R_s = (s + \bar{s})/(\bar{u} +\bar{d})$ $=$ {$0.7⁢2^{+0.52}_{−0.34}, 0.4⁢6^{+0.30}_{−0.20}, 0.3⁢2^{+0.23}_{−0.15}$} for 𝑥 ={$0.01, 0.04, 0.1$} at 𝑄 2 $=$ 4 GeV 2 . The data place more stringent constraints on the strange asymmetry $(s - \bar{s})$, which is found to be consistent with zero in this range.

Anderson, Trey [College of William and Mary, Willi↗
DOE OSTI2025

Studying 𝜋 + ⁢𝜋 − photoproduction beyond Pomeron exchange

Forward photoproduction of 𝜋 + ⁢𝜋 − pairs with invariant mass of the order of 𝑚 𝜌 ∼770 MeV is traditionally attributed to Pomeron exchange. Based on a detailed analysis of the CEBAF Large Acceptance Spectrometer photoproduction data collected at photon energies below 4 GeV, it is shown from a study of the angular moments that the dynamics of two-pion photoproduction for |𝑡| ≳ 0.5 GeV 2 cannot be explained by Pomeron exchange alone. This motivates the development of a new theoretical model of two-pion photoproduction which incorporates both two-pion and pion-nucleon resonant contributions. After fitting free parameters, the model provides an excellent description of the low moments of the angular distribution measured at CLAS and enables an assessment of the relative contributions of particular production mechanisms and an interpretation of the various features of the data in terms of these mechanisms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Nonperturbative aspects of the electromagnetic pion form factor at high energies

The structure of hadronic form factors at high energies and their deviations from perturbative quantum chromodynamics provide insight on nonperturbative dynamics. Using an approach that is consistent with dispersion relations, we construct a model that simultaneously accounts for the pion wave function, gluonic exchanges, and quark Reggeization. In particular, we find that quark Reggeization can be investigated at high energies by studying scaling violation of the form factor.

Form factors↗
DOE OSTI2025

Identifying Adversarial Cyber-Activity in Operational Technology Environments Using Bayesian Networks

Critical infrastructure and other operational technology (OT) environments face increasing cybersecurity risks from adversarial behavior. This paper describes the development of a risk model using a Bayesian network to enhance the comprehension of observable cyber events caused by malicious activity in OT environments. The core of the Bayesian network is a process model that describes the stages of adversary behavior. The remainder of the model is based on the MITRE ATT&CK® for Industrial Control Systems (ICS) taxonomy, which includes tactics and techniques that may be used by the adversary. The observables provide evidence for adversary behavior through the intermediary technique and tactic nodes. One challenge in constructing this model is a lack of open-source data from cyber-attacks on OT systems. This paper discusses learning from limited data, the elicitation of expert opinion to construct the conditional probability tables when data is scarce, and the refinement of the most difficult conditional probabilities tables using several forms of sensitivity analyses. Finally, the Bayesian network is demonstrated using two historical case studies: the DarkSide ransomware attack on the Colonial Pipeline and the destructive cyberattack targeting the ThyssenKrupp blast furnace. Index Terms—Cybersecurity, industrial control systems, operational technology

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Scintillating glass for precision calorimetry in nuclear physics

High-performance scintillator materials are needed for particle identification and measurements of energy and momentum of electromagnetic particles in modern nuclear physics experiments. As an example, the US Electron-Ion Collider, a unique collider with diverse physics topics, requires electromagnetic calorimetry enabling high-quality electron identification and detection in the momentum range of 0.3 to tens of GeV. The highest resolution in electromagnetic calorimeters can be provided by homogeneous materials, e.g., lead tungstate crystals. Inorganic glass scintillators have been investigated as an attractive and cost-effective alternative to crystals, that is also easier and faster to manufacture in mass production. In this paper, we discuss progress in the fabrication and characterization of recent scintillating glass samples on both test bench and beam tests. Further, the results are well-reproduced by simulation and are discussed in the context of the Electron-Ion Collider experimental requirements and bench-marked against lead tungstate crystals.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Exploring baryon resonances with transition generalized parton distributions: status and perspectives

QCD gives rise to a rich spectrum of excited baryon states. Understanding their internal structure is important for many areas of nuclear physics, such as nuclear forces, dense matter, and neutrino-nucleus interactions. Generalized parton distributions (GPDs) are an established tool for characterizing the QCD structure of the ground-state nucleon. They are used to create 3D tomographic images of the quark/gluon structure and quantify the mechanical properties such as the distribution of mass, angular momentum, and forces in the system. Transition GPDs extend these concepts to N → N* transitions and can be used to characterize the 3D structure and mechanical properties of baryon resonances. They can be probed in high-momentum-transfer exclusive electroproduction processes with resonance transitions e + N → e' + M + N*, such as deeply-virtual Compton scattering (M = γ) or meson production (M = π, K, etc.), and in related photon/hadron-induced processes. This White Paper describes a research program aiming to explore baryon resonance structure with transition GPDs. This includes the properties and interpretation of the transition GPDs, theoretical methods for structures and processes, first experimental results from JLab 12 GeV, future measurements with existing and planned facilities (JLab detector and energy upgrades, COMPASS/AMBER, EIC, EicC, J-PARC, LHC ultraperipheral collisions), and the theoretical and experimental developments needed to realize this program.

Experimental Nuclear Physics↗
DOE OSTI2025

Potential for tensor polarized deuterons in Hall D at Jefferson lab

Hall D at Jefferson lab is an ideal place to install a polarized deuteron target which can be “tensor polarized”, allowing the separation of the spin states m = 0, ±1 or the measurement of tensor asymmetries. The bremsstrahlung photon beam with 3 - 12 GeV endpoint provides very little heating or radiation damage compared to an electron beam, allowing the target to be run in frozen spin mode. Adiabatic fast passage spin manipulations can then be used to greatly enhance the population of the m = 0 spin state of the deuteron. Coherent photoproduction of ρ mesons from deuterium is sensitive to double-scattering at high momentum transfer and in the m = 0 spin state an additional sensitivity at intermediate momentum transfer opens up. In conclusion, we propose a frozen spin target for Hall D and the measurement of ρ photoproduced coherently from the deuteron as a flagship measurement.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

FFA BEAM TRANSPORT DEMONSTRATION DEVELOPMENT FOR THE CEBAF 22 GeV UPGRADE

Jefferson Lab is planning an upgrade of the Continuous Electron Beam Accelerator Facility (CEBAF) to deliver highly polarized electron beams up to 22 GeV using Fixed- Field Alternating-gradient (FFA) magnets. As the application of FFA technology in the 10–22 GeV energy range is unprecedented, experimental validation is required prior to full-scale implementation. To support this effort, a dedicated FFA test insert is proposed within the existing CEBAF infrastructure, with candidate locations in the Beam Switchyard (BSY) dump line or the Hall C beamline. The testbed will consist of a half or full FFA cell using combined-function permanent magnets and will enable systematic studies of beam transport, field quality, alignment, and magnet performance under realistic conditions. Operation with polarized beams in the 5–11 GeV range will closely replicate the energy scaling of the full upgrade. This paper presents the current design status and layout options for the proposed FFA beam transport test line.

Ogur, S. [Thomas Jefferson National Accelerator Fa↗
DOE OSTI2026

Dual-RF Phase Control for Adiabatic Energy Ramping in the EIC Rapid Cycling Synchrotron

The Electron-Ion Collider (EIC) Rapid Cycling Synchrotron (RCS) accelerates electrons from 750 MeV to 10 GeV over approximately 64.7 ms. While the baseline design simultaneously ramps both RF voltage and phase, this study evaluates an alternative where RF cavities are divided into two groups, each operating at a fixed 6.5 MV, with the effective voltage synthesized through phase control. In the symmetric scheme (Option A), both groups vary symmetrically about the synchronous phase to provide exact matching of energy gain and synchrotron tune throughout the ramp. Conversely, the asymmetric scheme (Option B) pins one group at the final operating phase while the other varies to supply the required energy gain. The feasibility of Option B is determined by the adiabaticity of the resulting synchrotron tune evolution, with ramp profiles, phase trajectories, and adiabaticity metrics analyzed for both implementations.

Gamage, B. [Thomas Jefferson National Accelerator ↗
DOE OSTI2026

Ion Trapping Studies and Mitigation Strategies for the EIC ERL-Based Strong Hadron Cooler

An Energy Recovery Linac based strong hadron cooler was previously considered for the Electron-Ion Collider. The required electron beam parameters for variable-energy strong hadron cooling place significant constraints on ion trapping and collective effects. This paper presents initial studies of these constraints through a combination of analytical modelling and numerical simulations of ion production, trapping behaviour, and mitigation strategies. A multi-bunch tracking framework based on ELEGANT with the ionEffects module is used to simulate machine operation over millisecond time scales, corresponding to more than 3 × 10^5 electron bunches. The simulations include modelling of ionisation processes together with transverse electron–ion dynamics, allowing the evolution and accumulation of ions to be investigated. Analytical expressions based on Gaussian beam distributions are used to estimate ion trapping conditions and benchmark the simulation results. A bi-periodic bunch spacing scheme is also investigated as a possible mitigation method by detuning the ion oscillation frequency. These studies provide an initial assessment of ion trapping in the strong hadron cooler and demonstrate possible approaches for reducing beam–ion effects.

Bi, R. [Lancaster University, Cockcroft Institute]↗
DOE OSTI2026

Machine learning at the Spallation Neutron Source accelerator and target

We describe the ongoing efforts to apply Machine Learning techniques to improve the performance of our accelerator and target. Specially, we are looking to minimize halo beam losses in the absence of a proper physics model, automatically detect and log anomalies in the target support systems such as cooling, and detect and prevent errant beam pulses in the linac. We also describe the infrastructure we use to acquire and stream data to the GPU cluster for training, our code development cycle, and edge computing for model inference. To minimize halo beam losses, we use a Reinforcement Learning technique tested on a virtual accelerator. The target anomaly detection is trained on archived data using incomplete physics models and is made part of the existing target reporting system. The errant beam prevention analyzes beam current and beam phase waveforms as well as accelerator configuration data to predict errant pulses. We also develop continual learning to adapt to changes in the accelerator.

Accelerator Physics↗
DOE OSTI2026

One-to-one mapping between the electromagnetic modes of cylindrical and coaxial half-wave cavities

Design of radio frequency (RF) couplers and diagnostics require a good understanding of the electromagnetic mode patterns of RF cavities. This study investigates the adiabatic transformation of transverse magnetic (TM) modes in a cylindrical cavity into transverse electromagnetic (TEM) modes of a coaxial cavity by gradually introducing an inner conductor. Using CST Studio Suite, we simulate the eigenmode evolution as the geometry transforms from a pure cylindrical to a coaxial configuration. We track the behavior of TM010 through TM014 modes to observe the continuous evolution into the corresponding TEM0 through TEM4 modes of the coaxial cavity. The process is governed by the evolution of the electric field orientation as the geometry shifts, enabling the axial TM fields to reorient into the radial electric field configuration of TEM modes. Field patterns, eigen-frequencies, and mode indentities are analyzed throughtout the transition. The results provide simulation-based evidence that TM to TEM conversion occurs without generation of newer eigenmodes, offering a valuable insight into the design of transition regions in superconducting RF (SRF) systems and provides a foundation for experimental validation.

Accelerator Physics↗
DOE OSTI2026

Plasma processing of SRF cavities at Jefferson Lab: Experiment results and simulation insight

Plasma processing of superconducting radio frequency (SRF) cavities has been an active research effort at Jefferson Lab (JLab) since 2019, aimed at enhancing cavity performance by removing hydrocarbon contaminants and reducing field emission. In this experiment, processing using argon-oxygen and helium-oxygen gas mixtures to find minimum ignition power at different cavity pressure was investigated. Ongoing simulations are contributing to a better understanding of the plasma surface interactions and the fundamental physics behind the process. These simulations, combined with experimental studies, guide the optimization of key parameters such as gas type, RF power, and pressure to ignite plasma using selected higher-order mode (HOM) frequencies. This paper presents experimental data from argon-oxygen and helium-oxygen gas mixture C75 and C100 cavity plasma ignition studies, as well as simulation results for the C100-type cavity based on the COMSOL model previously applied to the C75 cavity.

Accelerator Physics↗
DOE OSTI2025

Business Plan for a Domestic Supply of Superconducting Radiofrequency Cavities

Superconducting radiofrequency (SRF) cavities are critical components of modern particle accelerators. The industrialization of SRF technology in the U.S. has a long history, with several companies becoming interested in the technology in the past 30 years. However, there is currently no U.S. manufacturer with the capability to produce fully assembled, ready-to-test SRF cavities. A majority of these companies have either left the field or shut their doors. As a result, government-sponsored SRF accelerator projects in the U.S. largely rely on European vendors for the cavity supply. This presents not only a supply chain risk for scientific use cases, but also severely limits the commercialization of accelerator-based technologies. SRF accelerators have a range of strategic applications, including environmental remediation, semiconductor lithography, medical isotope production, and irradiation/sterilization. The nurturing of a domestic SRF industry is critical to maintaining U.S. economic competitiveness.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Virtual to Physical: Reinforcement Learning to Optimize SNS Particle Accelerator Controls

Complex accelerators must have control systems that can handle dynamic nonlinear environments. This makes traditional control methods unsuitable as they can struggle to adapt to these uncertainties. This provides an ideal environment for reinforcement learning algorithms as they are adaptable and generalizable. We present a reinforcement learning pipeline that can effectively handle the dynamics of a complex accelerator. We test and prove our pipelines capabilities on multiple environments including the Spallation Neutron Source (SNS) and the Beam Test Facility (BTF) at Oakridge National Lab (ORNL). Due to the limited time available to train an online algorithm like reinforcement learning on a real accelerator, we utilize a virtual twin accelerator (VIRAC) developed by ORNL to pretrain the policy and show its ability to converge in the virtual environment. We then test the adaptability of the pretrained RL model by applying it on the real accelerator and comparing the results. Utilizing our Scientific Optimization and Controls Toolkit (SOCT) and open-source standards such as Gymnasium we create and solve for a MEBT orbit correction problem in the SNS and an emittance maximization problem in the BTF. We show how Twin Delayed Deep Deterministic Policy Gradient (TD3) can solve this optimization environment in the virtual accelerator and transfer this policy onto the real accelerator for inference and model retraining. We show how reinforcement learning can be utilized as a control system for complex accelerators and provide a model pipeline for how an implementation performs and can be adapted to new accelerator control problems.

Kasparian, Armen [Thomas Jefferson National Accele↗