Search NASA⌕ Search

SEARCH · Search NASA

Results for “Objective”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Central object of the 30 Doradus Nebula, a supermassive star

Observations by the International Ultraviolet Explorer of R136(HD 38268), the central object of the 30 Doradus Nebula, at high and low spectral resolutions show a peculiar hot object with a massive stellar wind; spectra indicating an outflow speed of 3500 kilometers/sec and a temperature of 60,000 K. The peculiar object R136a, providing most of the ionizations, is interpreted as being dominated by a single superluminous object with the following, approximate properties: a radius 100 times that of the sun, a mass 2500 times that of the sun, and a loss rate of 10 to the -3.5 solar masses per year. The instability expected to be typical of such stars may account for the massive stellar wind.

Cassinelli, J. P.↗

Spectroscopy of two BL Lacertae objects

As part of a continuing program of observations of Bl Lac objects, the IUE cameras were used to look at PKS 0548-322 and PKS 2155-304. The spectra obtained are well described by power laws with alpha approximately 0.8 in each case. For each object, one set of simultaneous X-ray data was obtained using the solid state spectrometer (SSS) on the Einstein Observatory. These data show that the power law extends from ultraviolet frequencies into the X-ray regime, although it steepens slightly for PKS 2155-304. Both objects are variable in the ultraviolet and/or X-ray; in neither case does the small spectral variability appear to correlate with the intensity variability. The overall spectrum of these objects is interpreted in light of a synchrotron self-Compton model with relativistic beaming.

Urry, C. M.↗

The Faint Object Camera

The Faint Object Camera fully exploits the spatial resolution capability of the Space Telescope on the very faintest detectable objects over a broad wavelength range. A full complement of filters, objective prisms and polarizers, a choice of coronograhic masks, and a variety of scan formats extend the scientific versatility of the direct imaging mode. In addition, the Faint Object Camera provides the unique facility of long-slit spectroscopy to Space Telescope observers.

Macchetto, F.↗

IUE observations of Herbig-Haro and related objects

The I.U.E. spectra of the Herbig-Haro objectives H-H 1, H-H 2H, H-H 2G and H-H 32 A are considered. In order to obtain a better understanding of the physics of these intriguing objects and of the formation of the ultraviolet continua and emission lines in H-H objects, the UV spectra of the Cohen-Schwartz star, the T Tauri star AS 353A, and of the reflection nebula NGC 1999 (which is illuminated by the young object V 380 Orionis), are also examined.

Boehm, K. H.↗

X-ray imaging of extended objects using nonoverlapping redundant array

A common problem associated with X-ray imaging using coded apertures is the reconstruction of low-intensity extended objects. In the decoding of such objects, the overlapping images from the multiple pinholes give rise to noise cross talk and, in many cases, also to signal cross talk. In this paper, an alternate approach is proposed based on the principle used in an earlier (Yin et al., 1980) laboratory device for the real-time viewing of X-ray objects. It is shown that with this approach, the nonoverlapping redundant array, the sidelobes in the point spread function are not eliminated but merely displaced through a suitable choice of geometry. In this manner, the sidelobes no longer contribute to the background in the vicinity of a reconstructed image, and both signal and noise cross talks are completely eliminated. It may now be possible to reconstruct extended X-ray objects in 3-D by simple optical correlation and tomographically by a computer.

Yin, L.-I.↗

Technique for removing resin from a molded object

Resin is removed from a molded object in such a way that no cracks or expansion occurs in the casting. The resin is first mixed with a ceramics powder or metal powder. This mixture is then molded and the resin is removed by heat. The molded object is then placed into a container which is sealed and large enough to allow the gas from the resin to be controlled by heat from the resin. The gas pressure at the surface of the object is increased by the gas pressure generated from the resin and the resin removed. The increase in gas pressure from the surface of the molded object is 1.5 atm to 3 atm at 350 C to 400 C.

Hemmi, I.↗

Apparatus for releasably connecting first and second objects in predetermined space relationship

A releasable apparatus that connects first and second space objects, such as a spacecraft and a space vehicle, in predetermined spaced relationship is described. The apparatus comprises at least one probe member mounted on the first object, having an elongated shank portion, the distal end of which is provided with a tapered nose portion. At least one drogue assembly is mounted on the second space object for releasably capturing the probe member upon the first and second objects being brought into close proximity with each other.

Chandler, J. A.↗

Dual aperture multispectral Schmidt objective

A dual aperture, off-axis catadioptic Schmidt objective is described. It is formed by symmetrically aligning two pairs of Schmidt objectives on opposite sides of a common plane (x,z). Each objective has a spherical primary mirror with a spherical focal plane and center of curvature aligned along an optic axis laterally spaced apart from the common plane. A multiprism beamsplitter with buried dichroic layers and a convex entrance and concave exit surfaces optically concentric to the center of curvature may be positioned at the focal plane. The primary mirrors of each objective may be connected rigidly together and may have equal or unequal focal lengths.

Minott, P. O.↗

Observations of two peculiar emission objects in the Large Magellanic Cloud

Ultraviolet and visual wavelength spectra were obtained of two peculiar emission objects, Henize S63 and Sanduleak's star in the Large Magellanic Cloud. Previously not observed in the near- or far-ultraviolet, both objects exhibit strong permitted and semiforbidden line emissions. Estimates based on the absolute continuum flux of the hot companion star in Hen S63 indicate that it rivals the luminosity of the carbon star primary. The emission-line profile structure in both objects does not suggest Wolf-Rayet type emission. Carbon in Sanduleak's star (LMC anonymous) is conspicuously absent, while N V, semiforbidden N IV, and semiforbidden N III dominate the UV emission-line spectrum. Nitrogen is overabundant with respect to carbon and oxygen in both objects. The large overabundance of nitrogen in Sanduleak's star suggests evidence for CNO processes material similar to that seen in Nu Car.

Kafatos, M.↗

Variability of the ultraviolet spectrum of BL Lacertae objects

Attention is given to repeated observations of the two nearby BL Lac objects, Mrk 421 and PKS 0521-36, comparing the temporal behavior of their continuum in the 1300-3000 A range with that observed in intrinsically bright BL Lac objects and in Seyfert galaxies. Also discussed are the emission lines in the UV and optical spectrum of PKS 0521-36. It is suggested that the difference in variability pattern between BL Lac objects and Seyfert galaxies may be due to differences in the properties of the nonthermal continuum related to differences in accretion regimes, although it is more probably due to the presence of different continuum components in Seyfert galaxies. In BL Lac objects, the UV spectrum is likely to be synchrotron radiation from an optically thin source.

Ulrich, M. H.↗

A high-resolution study of Herbig-Haro objects 1 and 2

Observations have been conducted of Herbig-Haro objects 1 and 2 with high spectral and spatial resolution in order to test shock models for the line emission. A detailed bow shock model has been constructed which yields line widths and optical and UV spectra in reasonable agreement with observation for maximum shock velocities approximately 200 km/s. Such velocities are comparable to the transverse velocities of the knots in HH 1 and 2 inferred from proper motion studies. The observations suggest that HH objects are rapidly moving, dense clouds shocking with less dense interstellar medium. The large energy requirements of these objects, combined with their small apparent size as seen from the exciting star, seem to require unreasonably large stellar mass loss rates. However, it is possible that the HH objects subtended a much larger solid angle at the star when originally accelerated.

Hartmann, L.↗

A Unified Representation Scheme for Solid Geometric Objects Using B-splines (extended Abstract)

A geometric representation scheme called the B-spline cylinder, which consists of interpolation between pairs of uniform periodic cubic B-spline curves is discussed. This approach carries a number of interesting implications. For one, a single relatively simple database schema can be used to represent a reasonably large class of objects, since the spline representation is flexible enough to allow a large domain of representable objects at very little cost in data complexity. The model is thus very storage-efficient. A second feature of such a system is that it reduces to one the number of routines which the system must support to perform a given operation on objects. Third, the scheme enables easy conversion to and from other representations. The formal definition of the cylinder entity is given. In the geometric properties of the entity are explored and several operations on such objects are defined. Some general purpose criteria for evaluating any geometric representation scheme are introduced and the B-spline cylinder scheme according to these criteria is evaluated.

Bahler, D.↗

On the surface density of X-ray selected BL Lacertae objects

Only a handful of BL Lac objects have been found as a result of systematic optical identification of serendipitous Einstein X-ray sources. By combining the data from two flux-limited complete X-ray surveys (the HEAO 1 A-2 and the Einstein Observatory Medium Sensitivity Survey) the surface density of X-ray emitting BL Lac objects is evaluated as a function of their X-ray flux. It is found that a single power law is not an acceptable representation of the BL Lac objects' X-ray log N-log S. The number-flux relationship is consistent with the Euclidean slope at 'high' flux levels but shows a drastic flattnring below fluxes of the order of 10 to the -12th ergs per sq cm/s. The implications of this result are briefly discussed with respect to the luminosity function, the cosmological evolution, and the X-ray to optical flux ratio in BL Lac objects.

Maccacaro, T.↗

Multifrequency-spectral behavior of the BL Lacertae objects OI 90.4 and 3C 66A

Single-epoch multifrequency data for the BL Lac objects OI 90.4 and 3C 66A, spanning radio through ultraviolet wavelengths, are presented, as well as other measurements relevant to intensity and spectral-shape variability. Both BL Lac objects exhibit spectral curvature in the infrared-to-ultraviolet region, a properity that is inferred to be usual for this object class. Variability in the ultraviolet spectral index of OI 90.4 is found, whereas the spectral index of 3C 66A is the same in two observations 17 months apart. A synchrotron self-Compton jet model is applied to each BL Lac object. The OI 90.4 data are found to be best satisfied by a jet with a relatively high degree of relativistic beaming, but emission at frequencies below about 50 GHz is not described by the model. Furthermore, 3C 66A may not always undergo strong relativistic beaming, and the model may incorporate the small fraction of the total radio emission below about 20 GHz that is from within about 1.5 milliarcsec of the core.

Worrall, D. M.↗

Throughput comparison of microscope objectives and custom lenses for laser diode output beam collimation

The efficiency with which microscope objectives and custom lenses collimate laser diode emission was measured. Four microscope objectives of 10, 21, 45, and 60 power and two custom lenses of 1 and 0.8 power were used. An autocollimator system was used to measure throughput. It consisted of 1 m focal length lens, a 10 power microscope objective, and a 128-element G series Reticon linear array. Collimating throughput efficiency was defined as the ratio of measured collimated power to total laser output power. Two throughput efficiencies were obtained: one for the didoe operation below lasing and the other for the diode operation above lasing. The custom lenses had higher throughput efficiencies than the microscope objectives. The f/0.8 system provided better throughput efficiencies than the f/1.0 system.

Fuhr, P. L.↗

Numerical Techniques for Scattering from Submerged Objects

To represent the final results in terms of matrices, one expands all appropriate physical quantities in terms of partial wave basis states. This includes expansions for the incident and scattered fields and the surface quantities. The method then utilizes the Huygen-Poincare integral representation for both the exterior and interior solutions, leading to the required matrix equations. One thus deals with matrix equations, the complexity of which depends on the nature of the problem. It is shown that in general a transition matrix T can be obtained relating the incident field A with the scattered field f having the form T = PQ(-1), where f = TA. The structure of Q can be quite complicated and can itself be composed of other matrix inversions such as arise from layered objects. Recent improvements in this method appropriate for a variety of physical problems are focused on, and on their implementation. Results are outlined from scattering simulations for very elongated submerged objects and resonance scattering from elastic solids and shells. The final improvement concerns eigenfunction expansions of surface terms, arising from solution of the interior problem, obtained via a preconditioning technique. This effectively reduces the problem to that of obtaining eigenvalues of a Hermitian operator. This formalism is reviewed for scattering from targets that are rigid, sound-soft, acoustic, elastic solids, elastic shells, and elastic layered objects. Two sets of the more interesting results are presented. The first concerns scattering from elongated objects, and the second to thin elastic spheroids.

Werby, M. F.↗

The KPD survey for galactic plane ultraviolet-excess objects Space densities of white dwarfs and subdwarfs

A survey for ultraviolet-excess objects has been performed for over about 1000 sq deg of the Galactic plane. Photographic blue and ultraviolet plates were obtained to select ultraviolet-excess candidates, and spectroscopic observations were used to determine the nature of those objects. Over 70 white dwarfs and subdwarfs were identified from the survey plates, and these objects were analyzed statistically to determine scale heights and space densities. The sample was complete to B = 15.3 mag, with the space density of white dwarfs for Mv of less than 12.25 equal to 0.72 + or 0.25/1000 cu pc, slightly higher than that from the Palomar-Green survey. The average absolute magnitude determined for both the subdwarf O and the subdwarf B stars was considerably fainter than previous determinations, while the scale height for the subdwarfs was lower than earlier suggested values. The space density for the subdwarf O stars is about 7 x 10 to the -7th/cu pc, while the value for the subdwarf B stars is about 2 x 10 to the -6th/cu pc, both values considerably higher than previous estimates. The space densities can be used to place evolutionary constraints on these objects.

Downes, R. A.↗

Bibliographical index of objects observed by IUE 1978-85

A literature search covering the years 1978 to 1985 identified 1134 papers describing studies using data obtained with the International Ultraviolet Explorer (IUE) satellite. The names of greater than 9400 astronomical objects discussed were recorded. The objects were compiled into a list, along with each reference, and sorted by object name or catalog number. Cross-identification tables for the multiple names are provided. The 64-page Table of References includes the titles of the articles. This index enables a user to tell immediately where to find published papers describing IUE observations of the objects of interest.

Mead, Jaylee M.↗