Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical sources”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Simultaneous IUE, EXOSAT and optical observations of the unusual AM Her type variable H058+608

Simultaneous observations of the AM Her type variable H0538+608 made with IUE, EXOSAT, and a 1.3 m ground based telescope, and subsequent optical spectrophotometry at high and low resolution are discussed. The X-ray and optical data show clear evidence of a 3.30 + or - 0.03 hr period. Three SWP spectra were taken outside of eclipse and during overlapping phase intervals. The UV spectra contain strong emission lines characteristic of this class of objects and a flat continuum which appears to be deficient, given the brightness of source at optical and X-ray wavelengths. There is evidence for intensity variations in emission lines, particularly C IV. The X-ray light curves for H0538+608 reveal behavior which may be related to irregularities in its accretion flow.

Shrader, C. R.↗

Reliable Optical Pump Architecture for Highly Coherent Lasers Used in Space Metrology Applications

The design and initial demonstration of a laser pump module (LPM) incorporating single-mode, grating-stabilized 808-nm diode lasers and a low-loss, high-port-count optical combiner are completed. The purpose of the developed LPM is to reliably pump an Nd:YAG crystal in the laser head (LH), which serves as the optical metrology source for SIMLite mission. Using the narrow-linewidth, single-mode laser diodes enables placement of the pump power near Nd adsorption peak, which enhances pumping efficiency. Grating stabilization allows for stable pump spectra as diode operating temperature and bias current change. The low-loss, high-port-count optical combiner enables efficient combining of tens of pumps. Overall, the module supports 5+ years of continuous operation at 2 W of pump power with reliability approaching 100 percent. The LPM consists of a laser diode farm (LDF) and a pump beam combiner (PBC). An array of 807- to 808-nm fiber-pigtailed laser diodes makes up the LDF. A Bragg grating in each 5- m core single-mode (SM) fiber pigtail acts to stabilize the lasing spectra over a range of diode operating conditions. These commercially available single-mode laser diodes can deliver up to 150 mW of optical power. The outputs from the multiple pumps in the LDF are routed to the PBC, which is a 37-input by 1-output all-fiber device. The input ports consist of 5- m core SM fiber, while the output port consists of 105- m core, 0.15 NA (numerical aperture) multi-mode (MM) fiber. The combiner is fabricated by fusing the 37 input fibers while simultaneously tapering the fused region. At the completion of this process, the MM fiber is spliced to the end of the adiabatic taper, and, for protection, the combiner is sheathed by a capillary tube. A compact and robust metal housing was designed and fabricated to protect the PBC during space deployment.

Erlig, Herman↗

An X-ray and radio study of steep-spectrum radio sources. II - Four fields from a 22 MHz polar cap survey

Four fields containing radio sources with spectral indices greater than unity at low frequencies have been observed over a wide range of radio wavelengths and at X-ray wavelengths. For most of the steep-spectrum sources no optical identifications have been found to the detection limit of the Palomar Schmidt prints, even with the positional precision of about 1 arcsec from VLA maps. This implies that the associated galaxies or clusters lie at a great distance. X-ray emission was not detected from any of the steep-spectrum radio sources. In one case, an extended source appears to be a radio halo in an uncataloged cluster of galaxies at a redshift of 0.125, and it is suggested that this object is a promising candidate for the detection of inverse Compton X-rays, since it is not a high-luminosity source of thermal X-rays.

Dewdney, P. E.↗

Aeronet-based Microphysical and Optical Properties of Smoke-dominated Aerosol near Source Regions and Transported over Oceans, and Implications for Satellite Retrievals of Aerosol Optical Depth

Smoke aerosols from biomass burning are an important component of the global aerosol cycle. Analysis of Aerosol Robotic Network (AERONET) retrievals of size distribution and refractive index reveals variety between biomass burning aerosols in different global source regions, in terms of aerosol particle size and single scatter albedo (SSA). Case studies of smoke transported to coastal/island AERONET sites also mostly lie within the range of variability at near-source sites. Two broad families of aerosol properties are found, corresponding to sites dominated by boreal forest burning (larger, broader fine mode, with midvisible SSA 0.95), and those influenced by grass, shrub, or crop burning with additional forest contributions (smaller, narrower particles with SSA 0.88-0.9 in the midvisible). The strongest absorption is seen in southern African savanna at Mongu (Zambia), with average SSA 0.85 in the midvisible. These can serve as candidate sets of aerosol microphysicaloptical properties for use in satellite aerosol optical depth (AOD) retrieval algorithms. The models presently adopted by these algorithms over ocean are often insufficiently absorbing to represent these biomass burning aerosols. A corollary of this is an underestimate of AOD in smoke outflow regions, which has important consequences for applications of these satellite datasets.

AERONET↗

Time-resolved ultraviolet and optical spectroscopy of the pulsating X-ray source H2252-035

UV spectrophotometry and and optical spectroscopy of H2252-035, a close binary featuring a spinning, magnetized star, were carried out with instrumentation on the IUE satellite, in addition to ground-based observations from the Lick Observatory. An excess reddening was determined, with E(B-V) equal to 0.10. The spectrum from 1200-22,000 A was decomposed into a blackbody with a temperature of 13,400 K and a power law wavelength component, where the exponent is 2.74, which fits the excess UV and IR excesses. The exponent value is noted to be amenable to a disk model with a slight curvature because of its finite extent. The emission-line intensities were found to vary by a factor of two, with some of the variations accountable by a modulation in-phase with the optical continuum binary modulation.

Cordova, F. A.↗

Optical identification of serendipitous Einstein sources - 19 X-ray-selected active galactic nuclei

The identification of counterparts to 19 serendipitous Einstein Observatory X-ray sources at high galactic latitude is reported. The counterparts are identified as previously uncataloged active galactic nuclei (AGNs) - quasars or Seyfert galaxies - with redshifts varying from z = 0.036 through z = 1.40. The success rate, that is, the fraction of X-ray sources that are identified as AGNs, is approximately 50%, an order of magnitude larger than for traditional ultraviolet surveys. It is expected that this method will produce a large number of X-ray-selected AGNs for statistical studies. For the 19 AGNs in this sample, which is free from the radio selection effects that have complicated previous studies, the X-ray-to-optical-flux slope is found to be 1.30 + or - 0.05.

Chanan, G. A.↗

Discovery of Be/x-ray stars in two supernova remnants in the Small Magellanic Cloud

We present ROSAT high resolution x-ray images of two previously cataloged supernova remnants in the Small Magellanic Cloud (SMC): 0101-72.4 and 0104-72.3. These remnants were known to show optical, x-ray, and radio emission based on earlier observations: the present data show the first evidence for arcsecond-scale x-ray structure. There is no diffuse x-ray emission associated with the optically emitting shell in 0101-72.4; we set a 3 sigma upper limit of 7 x 10(exp 34) erg s(exp -1) on the 0.02-2 keV luminosity from the region. The x-ray emission comes instead from a weak pointlike object near the limb of the remnant. Optical observations of this source reveal a m(sub v) = 14.8 blue star with H alpha and H beta in emission; we identify this as a Be star in the SMC. No evidence for variability down to time scales of about 1 s was found in the ROSAT data; however, a comparison of the ROSAT and Einstein fluxes indicates possible long term variability by a factor of approximately 2 over several years. The other SNR, 0104-72.3, also contains a pointlike x-ray source with a blue optical counterpart (m(sub v) = 16.7) and H alpha emission. We tentatively identify this as a Be star as well. In addition to the point source there is weak diffuse x-ray emission from 0104-72.3 (L(sub x) approximately 1.4 x 10(exp 35) erg s(exp -1)), but the remnant's appearance in the x-ray band is considerably different from that in either the radio or optical band. We argue for a physical association between the supernova remnants (SNRs) and Be/x-ray stars. A large space velocity (greater than or approximately 100 km s(exp -1)) for the Be/x-ray binaries is required if the explosions that produced the remnants also formed the neutron stars in the binaries. Alternatively, the associations could be the result of common membership in OB associations in the SMC.

Hughes, John P.↗

The optical counterpart of the X-ray source H0253+193 - A distant, high-luminosity RS Canum Venaticorum system

Optical and near-infrared photometry in the VRIJHK and CO (2.35 microns) bands and optical spectroscopy and polarimetry reveal that the optical counterpart of the X-ray source H0253+193 is most likely a RS CVn binary system. The results show a visual extinction of 11.3 mag to the star, with an IR excess possibly due a cooler binary companion or circumstellar material. It is suggested that the I-band polarization of 8.1 + or - 1.8 may be induced in the starlight by passage through the molecular cloud. The lack of strong H-alpha emission in the optical spectrum argues against the possibility of a classical T Tauri star, and the IR excess argues against a naked T Tauri star. The wide energy spectrum found in the dereddened optical and near-infrared photometry supports the binary star model.

Clemens, Dan P.↗

Schlieren System Enhancements at GRC

This presentation describes the latest improvements that have been made to the Schlieren systems at the NASA Glenn Research Center. These systems are used for the visualization of flow and shock structures in our wind tunnel test facilities. Improvements have been made to the optics, light sources and knife edges using the latest state-of-the-art technology. The eventual goal of this upgrade work is to improve the sensitivity of the systems so that they can be used to make quantitative flow measurements.

Schlieren↗

Scientific investigations with the data base HEAO-1 scanning modulator collimator

The hardware specification for the Scanning Modulation Collimator (MC) experiment on HEAO-1 was to measure positions of bright (greater than 10(exp -11) ergs/cm(exp 2)s), hard (1 to 15 keV) x-ray sources to 5-10 arcsec, and to measure their size and structure in three energy bands down to 10 arcsec resolution. The scientific purpose of this specification was to enable the identification of these x-ray sources with optical and radio objects in order to elucidate the x-ray emission mechanism and the nature of the candidate astronomical system. The experiment was an outstanding success. Hardware systems functioned perfectly although loss of one (out of eight) proportional counters degraded our sensitivity by about 10 percent. Our aspect solution of 7 arcsec precision, allowed us to achieve statistic-limited location precision for all but the strongest sources. We vigorously pursued a strategy of determining the scientific importance of each identification, and of publishing each scientific result as it came along.

Schwartz, Daniel A.↗

Method and apparatus for sensor fusion

Method and apparatus for fusion of data from optical and radar sensors by error minimization procedure is presented. The method was applied to the problem of shape reconstruction of an unknown surface at a distance. The method involves deriving an incomplete surface model from an optical sensor. The unknown characteristics of the surface are represented by some parameter. The correct value of the parameter is computed by iteratively generating theoretical predictions of the radar cross sections (RCS) of the surface, comparing the predicted and the observed values for the RCS, and improving the surface model from results of the comparison. Theoretical RCS may be computed from the surface model in several ways. One RCS prediction technique is the method of moments. The method of moments can be applied to an unknown surface only if some shape information is available from an independent source. The optical image provides the independent information.

Krishen, Kumar↗

Optical characteristics of young quasars as sources of the cosmic X-ray background

The sources which dominate the thermal cosmic X-ray background cannot have X-ray spectra similar to the power laws measured for bright active galactic nuclei. The optical consequences of this disparity are pursued by considering a standard model for the photoexcitation and heating of the line emitting gas surrounding a central source (e.g., such as a quasar). The optical line emission to be associated with compact young quasar sources having the same X-ray spectrum as the X-ray background is found to be substantially different from that characteristic of typical quasars. Implications on quasar source counts and the identification of such new objects are discussed.

Boldt, E.↗

Optical characteristics of young quasars as sources of the cosmic X-ray background

The sources which dominate the thermal cosmic X-ray background cannot have X-ray spectra similar to the power laws measured for bright active galactic nuclei. The optical consequences of this disparity are pursued by considering a standard model for the photoexcitation and heating of the line-emitting gas surrounding a central source (e.g., such as a quasar). The optical line emission to be associated with compact young quasar sources having the same X-ray spectrum as the X-ray background is found to be substantially different from that characteristic of typical quasars. Implications on quasar source counts and the identification of such new objects are discussed.

Boldt, E.↗

Radiation-Hard SpaceWire/Gigabit Ethernet-Compatible Transponder

A radiation-hard transponder was developed utilizing submicron/nanotechnology from IBM. The device consumes low power and has a low fabrication cost. This device utilizes a Plug-and-Play concept, and can be integrated into intra-satellite networks, supporting SpaceWire and Gigabit Ethernet I/O. A space-qualified, 100-pin package also was developed, allowing space-qualified (class K) transponders to be delivered within a six-month time frame. The novel, optical, radiation-tolerant transponder was implemented as a standalone board, containing the transponder ASIC (application specific integrated circuit) and optical module, with an FPGA (field-programmable gate array) friendly parallel interface. It features improved radiation tolerance; high-data-rate, low-power consumption; and advanced functionality. The transponder utilizes a patented current mode logic library of radiation-hardened-by-architecture cells. The transponder was developed, fabricated, and radhard tested up to 1 MRad. It was fabricated using 90-nm CMOS (complementary metal oxide semiconductor) 9 SF process from IBM, and incorporates full BIT circuitry, allowing a loop back test. The low-speed parallel LVCMOS (lowvoltage complementary metal oxide semiconductor) bus is compatible with Actel FPGA. The output LVDS (low-voltage differential signaling) interface operates up to 1.5 Gb/s. Built-in CDR (clock-data recovery) circuitry provides robust synchronization and incorporates two alarm signals such as synch loss and signal loss. The ultra-linear peak detector scheme allows on-line control of the amplitude of the input signal. Power consumption is less than 300 mW. The developed transponder with a 1.25 Gb/s serial data rate incorporates a 10-to-1 serializer with an internal clock multiplication unit and a 10-1 deserializer with internal clock and data recovery block, which can operate with 8B10B encoded signals. Three loop-back test modes are provided to facilitate the built-in-test functionality. The design is based on a proprietary library of differential current switching logic cells implemented in the standard 90-nm CMOS 9SF technology from IBM. The proprietary low-power LVDS physical interface is fully compatible with the SpaceWire standard, and can be directly connected to the SFP MSA (small form factor pluggable Multiple Source Agreement) optical transponder. The low-speed parallel interfaces are fully compatible with the standard 1.8 V CMOS input/output devices. The utilized proprietary annular CMOS layout structures provide TID tolerance above 1.2 MRad. The complete chip consumes less than 150 mW of power from a single 1.8-V positive supply source.

Katzman, Vladimir↗

Optical information in landing scenes

During landing, the visual scene contains optical information about speed, altitude, glide slope, and track that is useful for the maintenance of spatial orientation and awareness. This information, embedded in the structure and transformations of the optical patterns, may be globally, regionally, or locally available. Global changes occur everywhere in the visual field during landing and include such information as flow rate acceleration due to changing speed and/or altitude. Regional changes occur within a more restricted area and include such information as horizon line motion due to aircraft pitching and rolling. Locally available changes are the most restricted and include such information as changes in runway form ratios due to changing glide slopes. Thus, within partially or fully synthetic displays, or within sensor-driven displays, preservation of flow rate and horizon motion information requires a minimum of knowledge about the details of the airport layout, while runway outlines do require much more knowledge of the layout. All may be important, however, and these, as well as other sources of optical information, can provide a pilot with his most natural framework for maintaining orientation.

Johnson, Walter W.↗

Seeing Red and Shooting Blanks: A Study of Red Quasars and Blank Field X-Ray Sources

We have identified a population of 'blank field sources' (or 'blanks') among the ROSAT (Roentgen Satellite) bright unidentified X-ray sources with faint optical counterparts. The extreme X-ray over optical flux ratio of blank field sources is not compatible with the main classes of X-ray emitters except for extreme BL Lacertae objects at fx/fv is equal to or less than 35. From the analysis of ROSAT archival data we found evidence for only three sources, out of 16, needing absorption in excess of the Galactic value and no indication of variability. We also found evidence for an extended nature for only one of the five blanks with a serendipitous HRI (High Resolution Imager) detection; this source (1WGA J1226.9+3332) was confirmed as a z=0.89 cluster of galaxies. Palomar images reveal the presence of a red (O - E is equal to or greater than 2) counterpart in the X-ray error circle for six blanks. The identification process brought to the discovery of another high z cluster of galaxies, one (possibly extreme) BL Lac and two apparently normal type 1 AGNs (Active Galactic Nuclei). These AGNs, together with four more AGN-like objects seem to form a well defined group: they present type 1 X-ray spectra but red Palomar counterparts. We discuss the possible explanations for the discrepancy between the X-ray and optical data, among which: a suppressed big blue bump emission, an extreme dust to gas (approximately 40 - 60 the Galactic ratio) ratio value and a high redshift (z is greater than or equal to 3.5) QSO (Quasi-Stellar Object) nature. These AGN-like blanks seem to be the bright (and easier to study) analogs of the sources which are being found in deep Chandra observations. Five more blanks have a still an unknown nature.

Elvis, Martin↗

Optical flow versus retinal flow as sources of information for flight guidance

The appropriate description is considered of visual information for flight guidance, optical flow vs. retinal flow. Most descriptions in the psychological literature are based on the optical flow. However, human eyes move and this movement complicates the issues at stake, particularly when movement of the observer is involved. The question addressed is whether an observer, whose eyes register only retinal flow, use information in optical flow. It is suggested that the observer cannot and does not reconstruct the image in optical flow; instead they use retinal flow. Retinal array is defined as the projections of a three space onto a point and beyond to a movable, nearly hemispheric sensing device, like the retina. Optical array is defined as the projection of a three space environment to a point within that space. And flow is defined as global motion as a field of vectors, best placed on a spherical projection surface. Specifically, flow is the mapping of the field of changes in position of corresponding points on objects in three space onto a point, where that point has moved in position.

Cutting, James E.↗

United States weather satellites

Performance characteristics, attitude stabilization systems, power sources and optical systems of Tiros, TOS and Nimbus weather satellites

TIROS SATELLITE↗