SEARCH · Search NASA
Results for “Optimization.”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Design optimization of an additively manufactured prototype recuperator for supercritical CO 2 power cycles
Supercritical CO 2 (sCO 2 ) power cycles are being developed due to their potential for high efficiency and reduced capital cost. It is necessary that these recuperators operate at high pressures and temperatures, up to 30 MPa and 900 K, with effectiveness values > 95% and pressure drops <1% to achieve high cycle efficiencies. Moreover, it is also necessary to have reasonable cost recuperators to control the capital costs of the sCO 2 power cycles. In this study, a Plate Pin-Fin (PPF) heat exchanger has been proposed as an sCO 2 recuperator. This preliminary recuperator design leverages capabilities enabled by additive manufacturing. Although the PPF design has characteristics similar to those of a plate heat exchanger, small diameter and relatively long fins are used to increase surface area, enhance heat transfer, and provide structural support for the partition plates that separate the fluid streams. Existing correlations for heat transfer and pressure drop were adapted for the PPF heat exchanger. These correlations were implemented in a 1D analytical model and used for the optimization of a 5-kW th high temperature recuperator for an indirect sCO 2 cycle by varying the design parameters to minimize the quantity of material required. A 3D conjugate heat transfer numerical simulations were conducted to validate the heat transfer and pressure loss correlations. A steepest descent method was used to minimize heat exchanger mass for a 5-kW prototype recuperator subject to a maximum specified pressure drop. Additionally, the design analysis indicated that an optimum PPF recuperator would be attained for the minimum allowable pin transverse spacing, minimum pin width, minimum pin height and near maximum cell aspect ratio. Moreover, at a low material requirement of 0.216 kg/kW and a pressure drop, which is almost five times lower than the allowable pressure drop design target, the optimized PPF heat exchanger has the high potential to be an alternative to a printed circuit heat exchanger, which is a conservative design basis for the current state-of-the-art sCO 2 recuperators.
Modeling the AC Power Flow Equations with Optimally Compact Neural Networks: Application to Unit Commitment
Nonlinear power flow constraints render a variety of power system optimization problems computationally intractable. Emerging research shows, however, that the nonlinear AC power flow equations can be successfully modeled using neural networks. These neural networks can be exactly transformed into mixed integer linear programs and embedded inside challenging optimization problems, thus replacing nonlinearities that are intractable for many applications with tractable piecewise linear approximations. Such approaches, though, suffer from an explosion of the number of binary variables needed to represent the neural network. Accordingly, this paper develops a technique for training an "optimally compact'' neural network, i.e., one that can represent the power flow equations with a sufficiently high degree of accuracy while still maintaining a tractable number of binary variables. We demonstrate the use of this neural network as an approximator of the nonlinear power flow equations by embedding it in the AC unit commitment problem, transforming the problem from a mixed integer nonlinear program into a more manageable mixed integer linear program. We use the 14-, 57-, and 89-bus networks as test cases and compare the AC-feasibility of commitment decisions resulting from the neural network, DC, and linearized power flow approximations. Our results show that the neural network model outperforms both the DC and linearized power flow approximations when embedded in the unit commitment problem. The neural network formulation most often selects a feasible unit commitment schedule, and furthermore, it only s
Optimization of simultaneous tritium–radiocarbon internal gas proportional counting
Not Available
Cost-optimal wave-powered persistent oceanographic observation
Not Available
An optimal merging technique for high-resolution precipitation products: OPTIMAL MERGING OF PRECIPITATION METHOD
Precipitation products are currently available from various sources at higher spatial and temporal resolution than any time in the past. Each of the precipitation products has its strengths and weaknesses in availability, accuracy, resolution, retrieval techniques and quality control. By merging the precipitation data obtained from multiple sources, one can improve its information content by minimizing these issues. However, precipitation data merging poses challenges of scale-mismatch, and accurate error and bias assessment. In this paper we present Optimal Merging of Precipitation (OMP), a new method to merge precipitation data from multiple sources that are of different spatial and temporal resolutions and accuracies. This method is a combination of scale conversion and merging weight optimization, involving performance-tracing based on Bayesian statistics and trend-analysis, which yields merging weights for each precipitation data source. The weights are optimized at multiple scales to facilitate multiscale merging and better precipitation downscaling. Precipitation data used in the experiment include products from the 12-km resolution North American Land Data Assimilation (NLDAS) system, the 8-km resolution CMORPH and the 4-km resolution National Stage-IV QPE. The test cases demonstrate that the OMP method is capable of identifying a better data source and allocating a higher priority for them in the merging procedure, dynamically over the region and time period. This method is also effective in filtering out poor quality data introduced into the merging process.
An Optimized Parameterization of Sub‐Grid Scale Advection for Convection Permitting Models
Convection‐permitting models (CPMs) explicitly resolve deep convection yet under‐resolve the organized lateral exchanges among drafts and their environment that control entrainment/detrainment, precipitation efficiency, and mesoscale structure. In this work, we introduce the Optimized Advection Scheme (OAS), which introduces a small rotation of the Cartesian frame of reference for the horizontal winds relative to other variables used in advection that induces cross‐gradient transport to mimic under‐resolved convective mixing. The rotation angle is selected to minimize the Kullback–Leibler divergence between the simulated and satellite observed precipitation intensity distributions, yielding a physically consistent perturbation that is computationally inexpensive and portable. Optimized Advection Scheme is implemented in WRF and evaluated over Amazon (April 2014). It shifts precipitation–precipitable‐water joint distributions toward lighter rain, reduces overly intense rates, and improves mesoscale convective system (MCS) lifetime and propagation. Mechanistically, the added cross‐gradient transport promotes convective detrainment and environmental mixing, which cools and moistens the mid‐troposphere, weakens downward momentum transport, alleviates excessive downwelling shortwave biases, and warms the surface temperature. The optimized rotation angle yields comparable improvements at 4‐km and 1‐km grid spacing, demonstrating resolution‐independent benefits across the CPM gray zone. By targeting the dynamical root of under‐mixed convective circulations, rather than tuning model microphysics or closures, OAS delivers robust, scale‐aware improvements in precipitation statistics, cloud vertical structure, and characteristics of MCS (MCSs), offering a practical pathway to more reliable CPM simulations for weather and climate applications.
Optimal arrangements of 1,3-diphenylisobenzofuran molecule pairs for fast singlet fission
A simplified version of the frontier orbital model has been applied to pairs of C 2 , C 2v , C s , and C 1 symmetry 1,3-diphenylisobenzofuran rotamers to determine their best packing for fast singlet fission (SF). For each rotamer the square of the electronic matrix element for SF was calculated at 2.2 × 10 9 pair geometries and a few thousand most significant physically accessible local maxima were identified in the six-dimensional space of mutual arrangements. At these pair geometries, SF energy balance was evaluated, relative SF rate constants were approximated using Marcus theory, and the SF rate constant k SF was maximized by further optimization of the geometry of the molecular pair. The process resulted in 142, 67, 214, and 291 unique geometries for the C 2 , C 2v , C s , and C 1 symmetry molecular pairs, respectively, predicted to be superior to the C 2 symmetrized known crystal pair structure. Furthermore, these optimized pair geometries and their triplet biexciton binding energies are reported as targets for crystal engineering and/or covalent dimer synthesis, and as possible starting points for high-level pair geometry optimizations.
Generalizing the self-healing diffusion Monte Carlo approach to finite temperature: A path for the optimization of low-energy many-body bases
A statistical method is derived for the calculation of thermodynamic properties of many-body systems at low temperatures. This method is based on the self-healing diffusion Monte Carlo method for complex functions [F. A. Reboredo, J. Chem. Phys. 136, 204101 (2012)] and some ideas of the correlation function Monte Carlo approach [D. M. Ceperley and B. Bernu, J. Chem. Phys. 89, 6316 (1988)]. In order to allow the evolution in imaginary time to describe the density matrix, we remove the fixed-node restriction using complex antisymmetric guiding wave functions. In the process we obtain a parallel algorithm that optimizes a small subspace of the many-body Hilbert space to provide maximum overlap with the subspace spanned by the lowest-energy eigenstates of a many-body Hamiltonian. We show in a model system that the partition function is progressively maximized within this subspace. We show that the subspace spanned by the small basis systematically converges towards the subspace spanned by the lowest energy eigenstates. Possible applications of this method for calculating the thermodynamic properties of many-body systems near the ground state are discussed. The resulting basis can also be used to accelerate the calculation of the ground or excited states with quantum Monte Carlo.
Reversals and collisions optimize protein exchange in bacterial swarms
Not Available
Optimal Zeno Dragging for Quantum Control: A Shortcut to Zeno with Action-Based Scheduling Optimization
The quantum Zeno effect asserts that quantum measurements inhibit simultaneous unitary dynamics when the “collapse” events are sufficiently strong and frequent. This applies in the limit of strong continuous measurement or dissipation. It is possible to implement a dissipative control that is known as “Zeno dragging” by dynamically varying the monitored observable, and hence also the eigenstates, which are attractors under Zeno dynamics. This is similar to adiabatic processes, in that the Zeno-dragging fidelity is highest when the rate of eigenstate change is slow compared to the measurement rate. We demonstrate here two theoretical methods for using such dynamics to achieve control of quantum systems. The first, which we shall refer to as “shortcut to Zeno,” is analogous to the shortcuts to adiabaticity (counterdiabatic driving) that are frequently used to accelerate unitary adiabatic evolution. In the second approach, we apply the Chantasri-Dressel-Jordan stochastic action [PRA 88, 042110 (2013)], and demonstrate that the extremal-probability readout paths derived from this are well suited to setting up a Pontryagin-style optimization of the Zeno-dragging schedule. A fundamental contribution of the latter approach is to show that an action suitable for measurement-driven control optimization can be derived quite generally from statistical arguments. Implementing these methods on the Zeno dragging of a qubit, we find that both approaches yield the same solution, namely, that the optimal control is a unitary that matches the motion of the Zeno-monitored eigenstate. We then show that such a solution can be more robust than a unitary-only operation and we comment on solvable generalizations of our qubit example embedded in larger systems. These methods open up new pathways toward systematically developing dynamic control of Zeno subspaces to realize dissipatively stabilized quantum operations. Published by the American Physical Society 2024
Carrying out an optimal experiment
Diffraction data collection parameters leading to optimal data quality are discussed in the context of different applications of these data. Diffraction data collection is the last experimental stage in structural crystallography. It has several technical and theoretical aspects and a compromise usually has to be found between various parameters in order to achieve optimal data quality. The influence and importance of various experimental parameters and their consequences are discussed in the context of different data applications, such as molecular replacement, anomalous phasing, high-resolution refinement or searching for ligands.
Distributed Direction-Optimizing Label Propagation for Community Detection
Designing a scalable algorithm for community detec-tion is challenging due to the tradeoff between the performance and the quality of the result. We propose a new distributed algorithm for community detection —Direction-Optimizing Label Propagation Algorithm, based on a novel Label Propagation Algorithm in community detection. The algorithm is inspired by the direction optimization technique for graph traversal algorithms and relies on the use of frontiers and alternates between label push and label pull operations. This organization creates ?exibility and affords opportunities for balancing the performance and the quality of the solution. We implement our algorithm in distributed memory with an active-message based asynchronous many-task runtime, AM++. We experiment with two seeding strategies for initial seeding stage, namely, random seeding and degree seeding. With the Graph Challenge datasets, our distributed implementation, in conjunction with the runtime support, achieves very good performance and reasonable quality of solution.
Hyperparameter Optimization in Binary Communication Networks for Neuromorphic Deployment
Training neural networks for neuromorphic deployment is non-trivial. There have been a variety of approaches proposed to adapt back-propagation or back-propagation-like algorithms appropriate for training. Considering that these networks often have very different performance characteristics than traditional neural networks, it is often unclear how to set either the network topology or the hyperparameters to achieve optimal performance. In this work, we introduce a Bayesian approach for optimizing the hyperparameters of an algorithm for training binary communication networks that can be deployed to neuromorphic hardware. We show that by optimizing the hyperparameters on this algorithm for each dataset, we can achieve improvements in accuracy over the previous state-of-the-art for this algorithm on each dataset (by up to 15 percent). This jump in performance continues to emphasize the potential when converting traditional neural networks to binary communication applicable to neuromorphic hardware.
Evaluating tantalum oxide stoichiometry and oxidation states for optimal memristor performance
Tantalum oxide has shown promising electrical switching characteristics for memristor devices. Consequently, a number of reports have investigated the electrical behavior of TaO{sub x} thin films. Some effort has been made to characterize the composition of the TaO{sub x} films and it is known that there must be an optimal stoichiometry of TaO{sub x} where forming and switching behavior are optimized. However, many previous reports lack details on the methodology used for identifying the chemistry of the films. X-ray photoelectron spectroscopy has been the most commonly used technique; however, peak fitting routines vary widely among reports and a native surface oxide of Ta{sub 2}O{sub 5} often confounds the analysis. In this report a series of large area TaO{sub x} films were deposited via sputtering with controlled O{sub 2} partial pressures in the sputtering gas, resulting in tunable oxide compositions. Spectra from numerous samples from each wafer spanning a range of oxide stoichiometries were used to develop a highly constrained peak fitting routine. This procedure allowed for the composition of the TaO{sub x} films to be identified with greater detail than elemental ratios alone. Additionally, the peak fitting routine was used to evaluate uniformity of deposition across individual wafers. The appearance of a greater contribution of Ta{sup 4+} oxidation states in the oxygen starved films are believed to relate to films with optimal forming characteristics.
Isopod (inverse Optimization And Design): Moose-based Application For Performing Inverse Optimization On Multiphysics Modeling And Simulation
ISOPOD (InverSe OPtimizatiOn and Design) will be a MOOSE (Multiphysics Object Oriented Simulation Environment)-based framework which will iteratively estimate the parameters by minimizing the difference between simulated and experimental observables. While inverse optimization has long been used for parameter estimation, the unique feature of ISOPOD is rapid solution of new inverse problems, leading to accelerated Research, Development and Demonstration (RD&D) for complex parameter estimation problems. This will be achieved by extending the software structure of MOOSE to inverse optimization, as well as building on the unique automatic differentiation feature of MOOSE.
Optimal Membrane Cascade Design for Critical Mineral Recovery Through Logic-based Superstructure Optimization
Critical minerals and rare earth elements play an important role in our climate change initiatives, particularly in applications related with energy storage. Here, we use discrete optimization approaches to design a process for the recovery of Lithium and Cobalt from battery recycling, through membrane separation. Our contribution involves proposing a Generalized Disjunctive Programming (GDP) model for the optimal design of a multistage diafiltration cascade for Li-Co separation. By solving the resulting nonconvex mixed-integer nonlinear program model to global optimality, we investigated scalability and solution quality variations with changes in the number of stages and elements per stage. Results demonstrate the computational tractability of the nonlinear GDP formulation for design of membrane separation processes while opening the door for decom-position strategies for multicomponent separation cascades. Future work aims to extend the GDP formulation to account for stage installation and explore various decomposition techniques to enhance solution efficiency.