SEARCH · Search NASA

Results for “PATTERN DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1986

The application of a sparse, distributed memory to the detection, identification and manipulation of physical objects

To determine the relation of the sparse, distributed memory to other architectures, a broad review of the literature was made. The memory is called a pattern memory because they work with large patterns of features (high-dimensional vectors). A pattern is stored in a pattern memory by distributing it over a large number of storage elements and by superimposing it over other stored patterns. A pattern is retrieved by mathematical or statistical reconstruction from the distributed elements. Three pattern memories are discussed.

Kanerva, P.↗

NASA NTRS1993

Mapping of the Ronda peridotite massif (Spain) from AVIRIS spectro-imaging survey: A first attempt

In both AVIRIS and ISM data, through the use of mixing models, geological boundaries of the Ronda massif are identified with respect to the surrounding rocks. We can also yield first-order vegetation maps. ISM and AVIRIS instruments give consistent results. On the basis of endmember fraction images, it is then possible to discard areas highly vegetated or not belonging to the peridotite massif. Within the remaining part of the mosaic, spectro-mixing analysis reveals spectral variations in the peridotite massif between the well-exposed areas. Spatially organized units are depicted, related to differences in the relative depth of the absorption band at 1 micron, and it may be due to a different pyroxene content. At this stage, it is worth noting that, although mineralogical variations observed in the rocks are at a sub-pixel scale for the airborne analysis, we see an emerging spatial pattern in the distribution of spectral variations across the massif which might be prevailingly related to mineralogy. Although it is known from fieldwork that the Ronda peridotite massif exhibits mineralogical variations at local scale in the content of pyroxene, and at regional scale in different mineral facies, ranging from garnet-, to spinel- to plagioclase-lherzolites, no attempt has been done yet to produce a synoptic map relating the two scales of analysis. The present work is a first attempt to reach this objective, though a lot more work is still required. In particular, for the purpose of mineralogical interpretation, it is critical to relate the airborne observation to field work and laboratory spectra of Ronda rocks already obtained, with the use of image endmembers and associated reference endmembers. Also, the pretty rough linear mixing model used here is taken as a 'black-box' process which does not necessarily apply correctly to the physical situation at the sub-pixel level. One may think of using the ground-truth observations bearing on the sub-pixel statistical characteristics (texture, structural pattern, surface distribution and vegetation contribution (grass,..)) to produce a more advanced mixing model, physically appropriate to the geologic and environmental contexts.

Pinet, P. C.↗

NASA NTRS1977

Particle size distributions and the vertical distribution of suspended matter in the upwelling region off Oregon

Various methods of presenting and mathematically describing particle size distribution are explained and evaluated. The hyperbolic distribution is found to be the most practical but the more complex characteristic vector analysis is the most sensitive to changes in the shape of the particle size distributions. A method for determining onshore-offshore flow patterns from the distribution of particulates was presented. A numerical model of the vertical structure of two size classes of particles was developed. The results show a close similarity to the observed distributions but overestimate the particle concentration by forty percent. This was attributed to ignoring grazing by zooplankton. Sensivity analyses showed the size preference was most responsive to the maximum specific growth rates and nutrient half saturation constants. The verical structure was highly dependent on the eddy diffusivity followed closely by the growth terms.

Kitchen, J. C.↗

NASA NTRS2016

Patterns of Activity in A Global Model of A Solar Active Region

In this work we investigate the global activity patterns predicted from a model active region heated by distributions of nanoflares that have a range of frequencies. What differs is the average frequency of the distributions. The activity patterns are manifested in time lag maps of narrow-band instrument channel pairs. We combine hydrodynamic and forward modeling codes with a magnetic field extrapolation to create a model active region and apply the time lag method to synthetic observations. Our aim is not to reproduce a particular set of observations in detail, but to recover some typical properties and patterns observed in active regions. Our key findings are the following. (1) Cooling dominates the time lag signature and the time lags between the channel pairs are generally consistent with observed values. (2) Shorter coronal loops in the core cool more quickly than longer loops at the periphery. (3) All channel pairs show zero time lag when the line of sight passes through coronal loop footpoints. (4) There is strong evidence that plasma must be re-energized on a timescale comparable to the cooling timescale to reproduce the observed coronal activity, but it is likely that a relatively broad spectrum of heating frequencies are operating across active regions. (5) Due to their highly dynamic nature, we find nanoflare trains produce zero time lags along entire flux tubes in our model active region that are seen between the same channel pairs in observed active regions.

Bradshaw, S. J.↗

NASA NTRS1982

Agricultural Aircraft Aid

Farmers are increasingly turning to aerial applications of pesticides, fertilizers and other materials. Sometimes uneven distribution of the chemicals is caused by worn nozzles, improper alignment of spray nozzles or system leaks. If this happens, job must be redone with added expense to both the pilot and customer. Traditional pattern analysis techniques take days or weeks. Utilizing NASA's wind tunnel and computer validation technology, Dr. Roth, Oklahoma State University (OSU), developed a system for providing answers within minutes. Called the Rapid Distribution Pattern Evaluation System, the OSU system consists of a 100-foot measurement frame tied in to computerized analysis and readout equipment. System is mobile, delivered by trailer to airfields in agricultural areas where OSU conducts educational "fly-ins." A fly-in typically draws 50 to 100 aerial applicators, researchers, chemical suppliers and regulatory officials. An applicator can have his spray pattern checked. A computerized readout, available in five to 12 minutes, provides information for correcting shortcomings in the distribution pattern.

Source record↗

NASA NTRS1963

METEORITIC TIME-OF-FALL PATTERNS

Decade, yearly and monthly distributions of meteorite time-of-fall patterns are examined, noting departures from randomness

METEORITE↗

NASA NTRS1992

Kanerva's sparse distributed memory with multiple hamming thresholds

If the stored input patterns of Kanerva's Sparse Distributed Memory (SDM) are highly correlated, utilization of the storage capacity is very low compared to the case of uniformly distributed random input patterns. We consider a variation of SDM that has a better storage capacity utilization for correlated input patterns. This approach uses a separate selection threshold for each physical storage address or hard location. The selection of the hard locations for reading or writing can be done in parallel of which SDM implementations can benefit.

Pohja, Seppo↗

NASA NTRS1982

The results of initial analysis of OSTA-1/Ocean Color Experiment (OCE) imagery

Ocean view images from the Ocean Color Experiment (OCE) were produced at three widely separated locations on the Earth. Digital computer enhancement and band ratioing techniques were applied to radiometrically corrected OCE spectral data to emphasize patterns of chlorophyll distribution and, in one shallow, clear water case, bottom topography. The chlorophyll pattern in the Yellow Sea between China and Korea was evident in a scene produced from Shuttle Orbit 24. The effects of the discharge from the Yangtze and other rivers were also observed. Two scenes from orbits 30 and 32 revealed the movement of patches of plankton in the Gulf of Cadiz. Geometrical corrections to these images permitted the existing ocean current velocities in the vicinity to be deduced. The variability in water depth over the Grand Bahama Bank was estimated by using the blue-green OCE channel. The very clear water conditions in the area caused bottom reflected sunlight to produce a sensor signal which was related inversely to the depth of the water.

Kim, H. H.↗

NASA NTRS2010

Low-Profile, Dual-Wavelength, Dual-Polarized Antenna

A single-aperture, low-profile antenna design has been developed that supports dual-polarization and simultaneous operation at two wavelengths. It realizes multiple beams in the elevation plane, and supports radiometric, radar, and conical scanning applications. This antenna consists of multiple azimuth sticks, with each stick being a multilayer, hybrid design. Each stick forms the h-plane pattern of the C and Ku-band vertically and horizontally polarized antenna beams. By combining several azimuth sticks together, the elevation beam is formed. With a separate transceiver for each stick, the transmit phase and amplitude of each stick can be controlled to synthesize a beam at a specific incidence angle and to realize a particular side-lobe pattern. By changing the transmit phase distribution through the transceivers, the transmit antenna beam can be steered to different incidence angles. By controlling the amplitude distribution, different side lobe patterns and efficiencies can be realized. The receive beams are formed using digital beam synthesis techniques, resulting in very little loss in the receive path, thus enabling a very-low loss receive antenna to support passive measurements.

Carswell, James R.↗

DOE OSTI2024

Impact of the Earthquake Rupture on Ground-Motion Variability of the 24 August 2016 M w 6.2 Amatrice, Italy, Earthquake

Here, the devastating 24 August 2016 M w 6.2 earthquake that struck Amatrice, Italy, marked the beginning of a prolonged seismic sequence dominated by three subsequent M w ≥6.0 events in the central Apennines region. The earthquake destroyed Amatrice’s historic center, claiming the lives of 299 individuals and causing widespread damage in the neighboring villages. The severity of the ground shaking, with a recorded maximum acceleration of 850 cm/s 2 on the east–west component at the Amatrice station, was far greater than the predicted acceleration based on the Italian ground-motion model (GMM). As pointed out by several investigations, the observed ground-motion amplitude and its spatial variability during the earthquake can be linked to specific rupture characteristics, including slip distribution and rupture directivity effects revealed by the observed data (Tinti et al., 2016; Pischiutta et al., 2021). In this study, we conducted physics-based 3D numerical simulations of ground motion for the Amatrice earthquake for frequencies up to 3 Hz. We employed a series of kinematic rupture models and a well-constrained local 3D velocity model incorporating surface topography. The kinematic rupture realizations were generated using multiscale hybrid and fully stochastic models, following the technique proposed by Graves and Pitarka (2016). We focused on assessing the sensitivity of near-fault ground-motion amplitudes to earthquake rupture characteristics, in particular, the spatial slip pattern. To evaluate the quality of our simulations, we employed goodness-of-fit measurements performed in comparisons of simulated and recorded ground motions. The simulated ground motions compare well with the recorded data and predictions from GMMs for Italy, ITA18 (Lanzano et al., 2019). However, we found that the simulated interevent ground-motion variability (randomness in the source process) of peak ground velocity, σ (PGV) is higher than the constant σ (PGV) predicted by conventional GMMs. Our simulations using several rupture scenarios demonstrate that the near-fault ground-motion amplification pattern is directly related to the slip distribution pattern.

3D Ground Motions Simulations↗

NASA NTRS1985

Atmospheric water distribution in a midlatitude cyclone observed by the Seasat Scanning Multichannel Microwave Radiometer

Patterns in the horizontal distribution of integrated water vapor, integrated liquid water and rainfall rate derived from the Seasat Scanning Multichannel Microwave Radiometer (SMMR) during a September 10-12, 1978 North Pacific cyclone are studied. These patterns are compared with surface analyses, ship reports, radiosonde data, and GOES-West infrared satellite imagery. The SMMR data give a unique view of the large mesoscale structure of a midlatitude cyclone. The water vapor distribution is found to have characteristic patterns related to the location of the surface fronts throughout the development of the cyclone. An example is given to illustrate that SMMR data could significantly improve frontal analysis over data-sparse oceanic regions. The distribution of integrated liquid water agrees qualitatively well with corresponding cloud patterns in satellite imagery and appears to provide a means to distinguish where liquid water clouds exist under a cirrus shield. Ship reports of rainfall intensity agree qualitatively very well with SMMR-derived rainrates. Areas of mesoscale rainfall, on the order of 50 km x 50 km or greater are detected using SMMR derived rainrates.

Mcmurdie, L. A.↗

NASA NTRS2001

Roughness-Dominated Transition on Nosetips, Attachment Lines and Lifting-Entry Vehicles

Modeling of roughness-dominated transition is a critical design issue for both ablating and non-ablating thermal protection systems (TPS). Ablating TPS, used for planetary-entry and earth-return missions, first experience recession under high-altitude, low-Reynolds-number conditions. Such laminar-flow ablation causes the formation of a surface microroughness pattern characteristic of the TPS material composition and fabrication process. For non-ablating TPS, such as the overlapping-tile, metallic heatshields proposed for future reusable launch vehicles, the surface roughness pattern is established a priori by the engineering design and assembly procedure. In both cases, these distributed surface roughness patterns create disturbances within, and alter the mean velocity profile of, the laminar boundary layer flowing over the surface. As altitude decreases, Reynolds number increases, and flow field conditions capable of amplifying these roughness-induced perturbations are eventually achieved, i.e., transition onset occurs. Boundary layer transition to turbulence results in more severe heat-transfer rates. Ablating TPS experience increased recession rates, leading to potential bum-through, while non-ablating TPS experience accelerated temperature rise, leading to potential melting of key components.

Reda, Daniel C.↗

NASA NTRS1982

Ejecta distribution around a small lunar crater

The ejecta deposit surrounding a one-half kilometer lunar crater was examined in search of a pattern to its distribution. Data reduction methods are described. Size and range frequency plots for the ejecta were generated.

Wetzel, S. J.↗

DOE OSTI2025

Landuse and land cover shape organic contaminants distribution in the Oconee River watershed in Georgia

Amid growing concerns over the persistence of organic contaminants, this study examines the influence of land-use patterns on their distribution in the Oconee River watershed, Georgia. Surface water samples from five sites across urban, recreational, and forested areas of Georgia’sOconee River watershed were analyzed for 22 organic contaminants, including pesticides and polycyclic aromatic hydrocarbons. Contaminant concentrations varied, with Acenaphthene (max: 19,462.04 ng/L), Chrysene (max: 984.10 ng/L), and Naphthalene (max: 2428.06 ng/L) being predominant. Atrazine (max: 171.04 ng/L) and Malathion (max: 114.99 ng/L)were the most detected pesticides. Land use and land cover significantly influence organic contaminant distribution, with higher levels in forested and urban areas. Risk Quotient (RQ) analysis confirmed no contaminants surpassed the critical threshold, though cumulative exposure may pose long-term risks. The study emphasizes the need for targeted monitoring and regulatory efforts to safeguard water quality in river systems influenced by diverse land-use practices.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1989

The plume of the Yukon River in relation to the oceanography of the Bering Sea

The ecosystem of the northern Bering-Sea shelf was studied using data from the NOAA Very High Resolution Radiometer and AVHRR and the Landsat MSS and Thematic Mapper (TM) in conjunction with shipboard measurements. Emphasis was placed on the influence of the Yukon River on this inner shelf environment and on the evaluation of the utility of the new Landsat TM data for oceanography. It was found that the patterns of water mass distribution obtained from satellite images agreed reasonably well with the areal patterns of temperature, salinity, and phytoplankton distributions. The AVHRR, MSS, and TM data show that the Yukon-River discharge is warmer and more turbid than the surrounding coastal water that originates to the south; thus, the Yukon water contributes to the higher temperatures and lower transmissivity of the coastal water. The high resolution of the TM thermal IR band made it possible to observe complex patterns and structures in the surface water that could not be resolved on previous data sets.

Dean, Kenneson G.↗

NASA NTRS1979

Jupiter's cloud distribution between the Voyager 1 and 2 encounters - Results from 5-micrometer imaging

As part of a continuing effort of ground-based support for Voyager target selection, infrared images in the 5-micrometer wavelength region were acquired in preparation for the Voyager 2 flyby of Jupiter. Observations were made during May 1979 from the Palomar 5-meter telescope and the new 3-meter NASA Infrared Telescope Facility at Mauna Kea and are compared to previous observations. Variations seen in the 5-micrometer flux distribution suggest global patterns of clouding over of some Jovian belts and clearing of others. These data were used to predict the Jovian cloud distribution at the time of the Voyager 2 encounter in order to target the imaging and infrared experiments to areas free of high obscuring clouds.

Terrile, R. J.↗

NASA NTRS2000

The Plasmasphere as Seen by the IMAGE EUV Instrument

The IMAGE spacecraft includes the extreme ultraviolet (EUV) imager, which is designed to view He+ plasmaspheric ions in the inner magnetosphere. These images provide the first opportunity to view the global distribution of plasmaspheric ions and their response to solar wind induced convection and the ring current. In addition to the generalized pattern of convection long believed to develop in thermal plasma, the EUV instrument is observing other meso-scale patterns of plasma distribution never before observed or postulated using in situ measurements. This poster presentation will present the "first light" observations of the EUV instrument and their possible interpretations.

Gallagher, D. L.↗

NASA NTRS1994

Observations of Laminar Surface Shear Stress Patterns on the Sidewall of a Rectangular, Mach 3 Quiet Tunnel Using Liquid Crystal Coatings

A shear-stress--sensitive liquid crystal coating (LCC) was used to visualize the surface shear stress distribution on the flat sidewall of the MSU quiet supersonic tunnel as a function of flow stagnation pressure. Under conditions of quiet operation, the LCC color-change response indicated the existence of a nonuniform surface shear stress distribution. This shear pattern was characterized by an elongated, down st ream-point ing triangular region of relatively low shear, with its apex on and its axis coincident with, the sidewall centerline. This low-shear zone was bounded symmetrically by two regions of relatively higher shear; these high-shear zones originated within the concave-curvature portion of the nozzle, in the corners between the flat sidewall and the contoured upper and lower nozzle surfaces. A 3-D Navier-Stokes code was used to compute the pressure and surface shear distributions on the sidewall. Flow-expansion-induced transverse pressure gradients on the nozzle sidewall generated symmetric inflows from the corners towards the sidewall centerline; these inflows caused a thickening of the sidewall boundary layer along the centerline, resulting in lower shear stresses consistent with the liquid crystal results. Peripherally nonuniform laminar boundary layer development, and the associated stability of such complex 3-D flows, must be considered in quiet-tunnel applications using rectangular nozzles. A color video will be shown.

Reda, D.↗