Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE CHANGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Vibrational Dynamics and Phase Transitions of Hydrazine to 50 GPa

The high pressure behavior of hydrazine, N 2 H 4 , has been investigated to 50 GPa at room temperature using infrared and Raman spectroscopy to explore pressure induced phase transitions and changes in hydrogen bonding. Three solid–solid phase transitions were detected at 11, 21, and 32 GPa on room temperature compression through dramatic changes in the lattice vibration and N–H stretching regions with increasing pressure in both measurement techniques. The transition to phase IV, which appears at 32 GPa, exhibits increased hydrogen bonding with significant hysteresis, persisting to 9 GPa on decompression. This work presents a detailed analysis of the pressure dependence of mode shifts and calculations of mode Grüneisen parameters as well as a determination of an approximate thermodynamic Grüneisen parameter. We compare these results to the behavior of other small molecular materials such as ammonia and water and explore the evolution of hydrogen bonding in hydrazine toward the symmetrically hydrogen bonded state, which has previously been suggested by theoretical computations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Novel Framework for Performance Evaluation and Design Optimization of PCM Embedded Heat Exchangers for the Built Environment

This research sheds light on the performance evaluation and design optimization of PCM-HXs for the built environment, addressing several barriers to practical issues to PCM-HX commercialization such as modeling aspects (i.e., modeling expertise and computational / time investment, etc.), manufacturing aspects (i.e., at-scale manufacturing, cost assessments, etc.) and experimental performance assessment (i.e., reliable experimental data, assessment of multiple PCM-working fluid combinations, etc.). We present a novel, comprehensive, and experimentally-validated design optimization framework for PCM-HXs capable of simulating any PCM-HX geometry with reasonable accuracy and significant computational time savings when compared to traditional CFD-based design practices. The framework was validated for a wide range of PCM-HX configurations, including a design optimization for a domestic hot water heater application where TES partially replaces electrical heating input. The resulting PCM-HXs were found to deliver 34-68% of the total daily hot water supply with only 5-10% package volume increase from the water heater, thus within U.S. DOE targets for TES systems. To identify the most promising HXs for PCM applications, first-order geometry and cost analyses were conducted based on off-the-shelf HX products. As part of this work, 9 PCM-HX prototypes were manufactured using additive and conventional manufacturing methods. Detailed economy-of-scale assessments were conducted for the most promising PCM-HXs and were found to have a good outlook for the next 5-10 years. The PCM-HX design optimization framework was validated through comprehensive in-house experimental testing using newly-developed PCM-to-fluid test facilities. In total,10 total in-house component-level experiments were conducted using these prototypes, including 9 with water and 1 with refrigerant (R410A) as the working fluid. It was found that the framework can successfully predict experimental thermal-hydraulic performance within ±10-20% the first time without manual design changes, eliminating the need for time-consuming and expensive prototyping efforts as part of the design process. As part of this work, a publicly-available PCM web tool was released which includes a PCM property database (531 PCMs) and PCM-HX modeling tool to assist the design community on common PCM-HX use-cases, e.g., single/multiple flow path(s) fluid-to-PCM and air-to-fluid-to-PCM configurations (https://ceeeweb.umd.edu/pcmapp/). This work will accelerate the design and time to market for next generation PCM-HXs.

25 ENERGY STORAGE↗
DOE OSTI2024

Quantifying and Modeling the Impact of Phase State on the Ice Nucleation Abilities of 2-Methyltetrols as a Key Component of Secondary Organic Aerosol Derived from Isoprene Epoxydiols

Organic aerosols (OAs) may serve as ice-nucleating particles (INPs), impacting the formation and properties of cirrus clouds when their phase state and viscosity are in the semisolid to glassy range. However, there is a lack of direct parameterization between aerosol viscosity and their ice nucleation capabilities. In this study, we experimentally measured the ice nucleation rate of 2-methyltetrols (2-MT) aerosols, a key component of isoprene-epoxydiol-derived secondary organic aerosols (IEPOX-SOA), at different viscosities. These results demonstrate that the phase state has a significant impact on the ice nucleation abilities of OA under typical cirrus cloud conditions, with the ice nucleation rate increasing by 2 to 3 orders of magnitude when the phase state changes from liquid to semisolid. An innovative parametric model based on classical nucleation theory was developed to directly quantify the impact of viscosity on the heterogeneous nucleation rate. This model accurately represents our laboratory measurement and can be implemented into climate models due to its simple, equation-based form. Based on data collected from the ACRIDICON-CHUVA field campaign, our model predicts that the INP concentration from IEPOX-SOA can reach the magnitude of 1 to tens per liter in the cirrus cloud region impacted by the Amazon rainforest, consistent with recent field observations and estimations. This novel parameterization framework can also be applied in regional and global climate models to further improve representations of cirrus cloud formation and associated climate impacts.

2-methyltetrol↗
DOE OSTI2025

Long-term thermal aging behavior and strength reduction in a laser powder bed fusion 316H stainless steel

The long-term thermal stability of structural alloys is essential for ensuring the safe and reliable operation of nuclear reactors and other power plants. While extensive research has explored the effects of thermal aging on conventional stainless steels, the behavior of additively manufactured (AM) alloys remains less understood. This study examines the thermal aging response of laser powder bed fusion (LPBF) 316H stainless steel (SS) at temperatures ranging from 550 °C to 750 °C over durations of up to 10,000 h (approximately 1.14 years). Advanced characterization techniques, including electron microscopy and synchrotron X-ray diffraction, were used to investigate dislocation recovery and phase evolution. Based on these findings, a time-temperature-precipitation (TTP) diagram was developed for LPBF 316H SS, revealing a 10- to100-fold acceleration in precipitation kinetics compared to wrought 316H SS. A physics-informed model was calibrated using the short-term experimental data, enabling predictions of average precipitate sizes, volume fractions of M 23 C 6 and Laves phases, and changes in molybdenum solute concentration for aging up to 1 × 10⁶ h (114 years). These microstructural insights were further utilized to estimate yield strength and extrapolate strength reduction factors over the extended aging period. Despite the accelerated aging kinetics, LPBF 316H SS demonstrated superior yield strength retention compared to its wrought counterpart. In conclusion, this study establishes a framework for evaluating long-term performance using short-term experimental data and supports the accelerated qualification of AM materials for high-temperature structural applications.

Laser powder bed fusion↗
DOE OSTI2026

Effect of 316 stainless steel powder processing conditions on microstructure

One parameter that has both economic and performance effects in the manufacturing of steel parts is the powder feedstock used. 316 L steel powder can be produced through water atomization or gas atomization, where both the powder size and the atomization process determine the cost of powder feedstock. Gas atomized powder is spherical and has a lower oxygen content than water atomized powder, making it the preferred choice for performance, but comes at a higher financial cost. Here, in this study, various 316 L powder batches are characterized to understand physical properties and microstructural variations. Density and flowability were determined using gas pycnometry and Hall flow tests. Powder morphology and porosity were qualitatively analyzed via optical microscopy and scanning electron microscopy, Finally, transmission electron microscopy was used to determine changes in phases present. Spherical gas atomized powder of 30–100 μm contained Mn$-$Si rich oxides both on the surface and within the matrix. Meanwhile, irregular water atomized powder 30 μm in diameter contained silicon oxides without manganese. All powder particles contained a nickel rich cellular structure which was shown to support the formation of additional phases. While literature has observed general microstructural features across 316 L powder particles, transmission electron microscopy (TEM) in this study has identified variations in precipitation and cell structures. Information regarding morphology, flowability, density, and phase distributions can be applied to understand variations in part consolidation, which will in turn show which powder aspects are significant for production.

Chemical segregation↗
DOE OSTI2025

Developing aqueous solubilizing agents as an alternative to solvent extraction

Here, advancing separations science is important for the entire field of chemistry. One partitioning technique that would benefit from improvement is solvent extraction. Despite its effective and widespread use, the method suffers from some problems: generation of flammable organic waste, lengthy process times, and safety concerns associated with contacting organic solvents with acidic aqueous solutions. We developed an alternative separation method inspired by solvent extraction that side-steps those issues. Toward this end, we identified that the functionality of an extractant (an agent used in solvent extraction to pull analytes from the aqueous phase into the organic phase) would change if it was modified for water solubility. In this alternative scenario, the extractant transforms into an “aqueous solubilizing agent.” We discovered that adding this aqueous solubilizing agent alongside a precipitating agent caused the contaminants to precipitate, but not the analyte. This separation concept was demonstrated within the bounds of one of the most difficult partitioning problems, separating minor actinides (Am 3+ ) from lanthanides (Ln 3+ ). We discovered that the (HSO 3 Ph) 4 BTP (aq) aqueous solubilizing agent prevented Am 3+ (aq) from precipitating with Ln 3+ (aq) when f-element precipitating agents (NaF (aq) or HF (aq) ) were added. This separation boasts impressive Am 3+ (aq) recovery yield (90 ± 2 %), near quantitative Ln 3+ (aq) removal, and high separation factors [>3000, Am 3+ (aq) vs. Nd 3+ (aq) ]. It seems likely – given the large number of candidate extractants that could be modified for aqueous solubility and the numerous combinations of existing solubilizing and precipitating agents – that this alternative approach could be used broadly in place of solvent extraction and solve other important separation problems.

(HSO3Ph)4BTP(aq)↗
DOE OSTI2025

Solution-Processed Temperature-Adaptive Radiative Paint as a Thermal Imaging Sensitizer

Thermography detects mid-infrared radiation from surfaces based on the Stefan-Boltzmann law, mapping surface temperatures and potentially revealing subsurface thermal activity. Recent developments offer an alternative strategy to traditional camera-based improvements: a thermal imaging sensitizer (TIS) coating whose emissivity increases sharply with local temperature, amplifying small thermal variations into high-contrast signals. Existing TIS structures are nanofabricated solid membranes and face significant challenges in fabrication complexity. Here, in this study, we present a solution-processed, liquid form of TIS, termed temperature-adaptive radiative paint (TARP), to address these limitations. TARP offers drastically reduced fabrication costs, scalability to large areas, applicability to curved surfaces, and an extended operating temperature range, while maintaining the function of temperature amplification. Application of TARP enhances small temperature contrast by more than 3 times, substantially improving ambient thermography and enabling broader applications such as detection of structural defects and hot spots in electronic components.

paint↗
DOE OSTI2026

Scalable Hot-Water-Repellent Superhydrophobicity via Thermal Insulation

Superhydrophobic surfaces, which rely on a combination of surface texture and chemistry, often lose their repellent behavior when contacted by hot water (≳40 °C) because the impinging hot water replaces the requisite air layer within the surface texture via evaporation and recondensation. In contrast to previous approaches targeting this condensation-induced failure mode that rely on intricately tailored surface structures or complex chemical treatments, we present a scalable approach based on thermal design: the multilayered insulated superhydrophobic (MISH) coating mitigates condensation-induced failure by preventing heat transfer. Superhydrophobicity is retained at impinging water temperatures up to 90 °C, with durability demonstrated via long-term (>1 million impacts) droplet impingement experiments. We explain the mechanism for this approach with a detailed thermal model; the model reveals that the underlying physical behavior is self-similar across coating parameters and impinging fluid temperatures. Finally, the MISH coating accommodates curved geometries and large surfaces, and it is over 4 orders of magnitude less expensive than cleanroomnanofabricated alternatives, indicating promise for practical use in the energy sector, chemical processing, and the food and medical industries.

coating materials↗
DOE OSTI2025

Developing a Lagrangian Frame Transformation on Satellite Data to Study Cloud Microphysical Transitions in Arctic Marine Cold Air Outbreaks

Abstract Arctic marine cold air outbreaks (CAOs) generate distinct and dynamic cloud regimes due to intense air‐sea interactions. To understand the temporal evolution of CAO cloud properties and compare different CAO events, a Lagrangian perspective is particularly useful. We developed a novel technique that enables the conversion of inherently Eulerian satellite data into a Lagrangian framework, combining the broad spatiotemporal coverage of satellite observations with the advantages of Lagrangian tracking. This technique was applied to eight CAO cases associated with a recent field campaign. Our results reveal a striking contrast among the cases in terms of cloud‐top phase transitions, providing new insights into the evolution of CAO cloud properties.

Lagrangian analysis↗
DOE OSTI2025

Super-expansive thermo-reversible interstitial solid solution of nanocrystal superlattices with mesogens

Designing superlattices of nanocrystals to mimic and extend the properties of atomic crystals has been a long-standing motivation in materials chemistry. Interstitial solid solutions, such as steel, are well-studied atomic lattices in which mobile components move among the interstices. These materials exhibit unique properties, including reversible structural changes and phase transitions. Interstitial solid solutions possess unique dynamic structures and reversible responses, which motivate the creation of their colloidal equivalents. Here, in this study, we report a fully thermo-reversible colloidal interstitial solid solution by combining liquid crystals and nanocrystals functionalized with promesogenic ligands. Mesogen molecules fill and diffuse among the interstices of a superlattice, resulting in a super-large thermal expansivity. The approach uses a modular design of interparticle interactions, allowing control of interparticle distance, microstructure and transition between crystallographic forms.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Operando microscopy for neuromorphic hardware

Microscopy techniques can uncover the physical properties and dynamic behaviours of materials, driving the discovery of emergent phenomena and guiding the design of next-generation computing hardware. As artificial intelligence becomes pervasive, the demand for high-performance materials to support sustainable information technologies is growing. Here, this Review highlights state-of-the-art imaging from electron and X-ray to optical techniques to probe the dynamics of neuromorphic materials, including operando characterization of devices. We examine design principles for neuromorphic materials, along with obstacles that hinder their development. Emphasis is placed on spatially and temporally resolved approaches that capture state changes including phase transitions, ferroic switching and spin-wave propagation that emulate biological components such as neurons, synapses and their connectivity. We discuss challenges in operando characterization and the integration of artificial intelligence-driven analysis for feedback-guided material discovery. Finally, we outline opportunities for real-time imaging of neuromorphic systems, paving the way towards adaptive, brain-inspired hardware.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Porous reaction-bonded silicon nitride: Size effects for pressureless nitriding of binder jet additively manufactured silicon

The direct nitridation of binder jet additively manufactured silicon to produce porous reaction-bonded silicon nitride was explored to determine the maximum thickness of the sample that could be converted to >99% silicon nitride. The maximum thickness that could be nitrided was investigated by nitriding cubes of increasing physical size on the millimeter scale. Highly porous samples with high conversion ( > 99%) to silicon nitride were achieved in cubes with 35 mm edge length. It was shown that the silicon nitride phase content changes with increasing sample size.

Aguirre, Trevor [ORNL] (ORCID:0000000281469630)↗
DOE OSTI2025

Designing a quantum-accurate machine-learning potential to enable large-scale simulations of deuterium under shock

Large-scale molecular dynamics of deuterium under shock can elucidate kinetic processes vital to the target design in inertial confinement fusion and high-energy-density experiments. However, modeling the complex evolution of this material from an insulating molecular state at ambient pressure to an ionized, atomic fluid under strong shock is beyond the capability of simple pair and even bond order potentials. We thus train a quantum-accurate and broadly transferable machine-learning interatomic potential for deuterium using the Chebyshev Interaction Model for Efficient Simulations framework. We show that due to an improved description of the molecular-to-atomic transition, our model is able to better reproduce the ab initio equation of state, radial distribution functions, and principal Hugoniot than bond order potentials. This represents an important step toward large-scale quantum-accurate and nonequilibrium simulations of complicated systems under dynamic changes including phase transitions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Surface Heat Load Analysis Due to Plasma Thermal Radiation on Equatorial Port 09

This paper reports calculated surface heat load owing to plasma thermal radiation, which will be applied to the surfaces of Equatorial Port 09 (EP09) diagnostic shield modules (DSMs) for thermal analysis during normal operation. The calculation assumes that the thermal energy will deposit uniformly in all directions from the plasma to the adjacent components and environment (i.e. gray body radiation). Assuming the temperature for the plasma surface, calculated view factors are used to determine the allocation of thermal energy to each component. The analysis provides an initial assessment of the thermal radiation heat load on the DSMs to be checked in structural/thermal analyses to verify significance. In conclusion, the designs of the EP09 components are still in the early preliminary phase, and changes are expected in the future.

ANSYS↗
DOE OSTI2025

Quantitative surface studies of moiré intercalated Pb structures under Gr/SiC

Quantitative growth studies using surface diffraction and scanning tunneling microscopy are carried out to determine the intercalation conditions for Pb under Gr/SiC, with initial phase a mixture of buffer-layer and single-layer graphene. Intercalation is a kinetically complex, multistage process with intercalated Pb moving between different subsurface locations with annealing, eventually to the location of higher stability. The transfer is determined by monitoring the difference of a given spot intensity from its clean value, as a function of growth parameters. In addition, a broad, low-intensity (10×10) gr moiré phase is observed exclusively originating from intercalated Pb. Well-defined growth conditions are identified for the moiré spot to be observed reversibly. The (10×10) gr phase follows changes of the Pb(10) spot during growth and annealing experiments, instead of changes of the other Gr/SiC spots indicating preferred nucleation of Pb islands on the (10×10) gr domains. These structural results are discussed in connection to different models proposed for the (10×10) gr supercell and the subsurface Pb coverage. In conclusion, mass transport of subsurface Pb is unusually high, possibly because of the very high compression of the intercalated Pb, when compared to metallic Pb(111).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Toward a neutrino-limited dark matter search with crystalline xenon

Experiments searching for weakly interacting massive particle dark matter are now detecting background events from solar neutrino-electron scattering. However, the dominant radioactive background in state-of-the-art experiments such as LZ and XENONnT is beta decays from radon contamination. In spite of careful detector material screening, radon progenitor atoms are ubiquitous and long-lived, and radon is extremely soluble in liquid xenon. We propose a change of phase and demonstrate that crystalline xenon offers more than a factor × 500 exclusion against radon ingress, compared with the liquid state. This level of radon exclusion would allow crystallized versions of existing experiments to probe spin-independent cross sections near 10 − 47 cm 2 in roughly 11 years, as opposed to the 35 years required otherwise. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Requirements for probing chiral Casimir-Polder forces in a molecular Talbot-Lau interferometer

We theoretically investigate the influence of chiral Casimir-Polder (CP) forces in Talbot-Lau interferometry, based on three nanomechanical gratings. We study scenarios where the second grating is either directly written into a chiral material or where the nanomask is coated with chiral substances. We show requirements for probing enantiospecific effects in matter-wave interferometry in the transmission signal and the interference fringe visibility, which depend on the de Broglie wavelength and the molecular chirality. The proposed setup is particularly sensitive to CP forces in the nonretarded regime where chiral effects can be comparable in magnitude to their electric and magnetic counterparts. While the first and third gratings do not change the phase of the matter wave, applying a coating of chiral substances to them enhances the instrument's chiral selectivity. Published by the American Physical Society 2024

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Powdermet CRADA for VELOCITI Voucher (CRADA Final Report)

NLR shall develop a model of an electric thermal energy storage (ETES) system in the System Advisor Model (SAM) framework that uses a salt and particle slurry developed by PowderMet as the thermal energy storage medium. The ETES shall consist of a recuperated sCO 2 Brayton cycle using 2-tank indirect thermal energy storage and an electric heater for heat input. The salt slurry uses chloride salt and operates at a maximum temperature of 500-720°C. The ETES uses dry air cooling. The salt slurry will be modeled as a sensible heat storage medium and as a latent heat storage medium. NLR will use the model to do parametric analysis of the factors affecting the performance (ex., round trip efficiency) of the ETES system. NLR will work with PowderMet to estimate the costs of system components and total system costs, with the levelized cost of electricity (LCOE) as the primary cost metric.

14 SOLAR ENERGY↗