SEARCH · Search NASA

Results for “PHASE SHIFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Bridging Structural and Chemical Insights: Integrating In Situ Electron Microscopy and X-ray Spectroscopy for Catalysis Research

Environmental transmission electron microscopy probes the local structure, composition, and chemistry of materials under gas environments, while ambient-pressure X-ray photoelectron spectroscopy provides ensemble chemical and electronic structure information in gaseous conditions. Both techniques utilize similar differential pumping schemes to mitigate electron scattering by the gas phase, allowing for unique opportunities to correlate gas–surface interactions across comparable pressure ranges. Their integration has advanced the understanding of various catalytic reactions, including the water–gas-shift reaction, CO oxidation, and surface passivation dynamics. In conclusion, this Mini-Review discusses their methodological advancements, challenges, and potential for further integration with other in situ techniques to address complex catalytic phenomena and guide catalyst design.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Visualizing degradation mechanisms in a gas-fed CO 2 reduction cell via operando X-ray tomography

We utilize operando X-ray computed tomography, coupled with real-time electrochemical analysis, to reveal the underlying failure mechanisms of membrane electrode assemblies (MEAs) for electrochemical CO 2 reduction (eCO 2 R). Through operando imaging, we can obtain unprecedented insights into the dynamic behavior of the MEA under different operating conditions, revealing critical changes in interface interactions, phase distribution, and structural integrity over time. Our findings identify phenomena giving rise to the transition from CO 2 R to the hydrogen evolution reaction (HER), as evidenced by shifts in cathode potential and CO 2 R selectivity. The formation of inhomogeneous precipitates at the gas diffusion electrode disrupts the CO 2 supply and reduces the active sites for eCO 2 R, resulting in a shift toward H2 production during low current density operation. Additionally, under high current density conditions, rapid water crossover up to the microporous layer/gas diffusion layer promotes the transition from CO 2 R to HER, further shifting cell potential toward anodic direction. Oscillating voltage conditions reveal the dissolution and regrowth of precipitates, providing direct visualization of the competing selectivity of CO 2 R and HER. This work offers new insight into the degradation mechanisms of MEAs, with implications for the design of more durable CO 2 R systems.

Lee, Sol A [California Institute of Technology (Ca↗

DOE OSTI2025

Interactions Enhance Ramp Reversal Memory in Locally Phase Separated Materials

The ramp-reversal memory (RRM) effect in metal–insulator transition metal oxides (TMOs), a non-volatile resistance change induced by repeated temperature cycling, has attracted considerable interest in neuromorphic computing and non-volatile memory devices. Our previous defect motion model successfully explained RRM in vanadium dioxide (VO 2 ), capturing observed critical temperature shifts and memory accumulation throughout the sample. However, this approach lacked interactions between metallic and insulating domains. Here, we extend our model by combining a correlated Random Field Ising Model with defect diffusion-segregation, enabling accurate hysteresis modeling while predicting the relationship between RRM and domain interactions. Our simulations demonstrate that the maximum RRM occurs when the turnaround temperature approaches the inflection point. This peak in RRM vs. turnaround temperature is consistent with prior transport measurements, as well as our own optical measurements reported here. Significantly, we find that increasing nearest-neighbor interactions enhances the maximum memory effect, thus providing a clear mechanism for optimizing RRM performance. Since our model employs minimal assumptions, we predict that RRM should be a widespread phenomenon in materials exhibiting patterned phase coexistence of electronic domains. This work not only advances fundamental understanding of memory behavior in TMOs but also establishes a much-needed theoretical framework for optimizing device applications.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Interplay of Crystal Structure and Magnetic Properties of the Eu 5.08-x Sr x Al 3 Sb 6 Solid Solution

Zintl phases containing rare-earth metals have gained attention due to their magnetic, electronic, and thermoelectric properties. Eu 5.08 Al 3 Sb 6 is a new structure type (monoclinic space group C2/m) that can be described as a pseudorock-salt EuSb motif with the Eu-centered Sb octahedra at the origin of the unit cell, and on the C-face center, containing either Eu (8%) or an Al 4 tetrahedron modeled as a dual tetrahedron (37.5%). The complete solid solution of Eu 5.08–x Sr x Al 3 Sb 6 can be prepared; however, the cation totals vacillate from 5 to 5.24 depending on the Al content. Al K-edge XANES shows a shift to higher energy relative to the Al metal but at slightly lower energy relative to AlSb, indicating an intermediate oxidation state closer to +3 than 0. The lack of an Al K-edge shift with the incorporation of Sr suggests that changes in Sr content do not have a meaningful impact on the electronics of the Al tetrahedra. Investigation of the solid solution structures provides evidence for classifying this structure type as a polar intermetallic phase with variable composition. Magnetization measurements were collected for the solid solution and show complex magnetic ordering with competing ferromagnetic and antiferromagnetic interactions as the Sr content increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

The Noncollinear Path to Two-Dimensional Topological Superconductivity

Two-dimensional magnet-superconductor hybrids (2D-MSH) are promising candidates to realize devices for topology-based quantum technologies and superconducting spintronics. So far, studies have focused on 2D-MSH systems with collinear ferro- or antiferromagnetic layers. Here, we present the discovery of topological superconductivity in a noncollinear MSH system where a magnetic spiral is realized in an Fe monolayer proximity coupled to a superconducting Ta(110) substrate. By combining low-temperature spin-polarized scanning tunneling spectroscopy with an in-depth theoretical study, we can conclude that the system is in a topological nodal-point superconducting phase with low-energy edge modes. Furthermore, we reveal that for this noncollinear spin texture, these edge modes exhibit a magnetization direction-dependent dispersion. This means that a spatial shift of the magnetic spiral could be used to reverse the chirality of an edge mode in future MSH-based devices.

chiral edge modes↗

DOE OSTI2024

Experimental and Computational Evaluation of Lipidomic In-Source Fragmentation as a Result of Postionization with Matrix-Assisted Laser Desorption/Ionization

Matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) can provide spatially resolved molecular information about a sample. Recently, a postionization approach (MALDI-2) has been commercially integrated with MALDI-MSI, allowing for bettered sensitivity and consequent improved spatial resolution. While advantages of MALDI-2 have previously been established, we demonstrate here statistically increased in-source fragmentation (ISF) results from postionization with a commercial instrument. Via lipid standard analyses, known MALDI ISF pathways (e.g., loss of trimethylamine) were statistically increased in MALDI-2 compared to MALDI-1 (65–172% increase in fragmentation). Gas phase molecular modeling with density functional theory estimated that the most-weighted virtual orbitals to excite within lipids involve ester and phosphate bonds. Protonated lipid excitation energies are furthermore red-shifted compared to those of other adduct types [e.g., 254 nm for protonated PC(16:0/18:1)] and approach the MALDI-2 laser energy (266 nm). Analysis of rat brain homogenate detected statistically more positive-ion mode peaks with MALDI-2 (1090) than that with MALDI-1 (719), where Kernel density estimations showed that the majority of this enhancement occurs with low m/z ions (i.e., m/z 75–500). Taken together with the lipid standard data, these observations may indicate ISF due to postionization. Finally, while artifact contributions from matrix blanks were also noted, both experimental and computational data sets suggest that the overall extent of ISF is statistically increased in MALDI-2 compared to MALDI-1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Mechanistic Tuning of Chemical Transformations for Coupling the Geo-mimicry of Acid Gas Storage with Design Strategies to Produce Clean Energy Carriers in Multi-Phase Reaction Environments (MATTER) (Final Report)

The need to diversify approaches to produce essential energy carriers such as H 2 motivate advances in thermodynamically downhill geo-inspired pathways. Currently, more than 80% of hydrogen is produced via steam methane reforming (SMR) followed by water gas shift reaction (WGSR) pathway with the co-production of CO 2 . As an alternative to introducing CO 2 separation strategies downstream such as the use of membranes, solvents, or sorbents, geo-inspired carbon mineralization is harnessed as an alternative crystallization pathway. The thermodynamically downhill carbon mineralization pathways are hypothesized to accelerate H2 conversion while separating CO 2 . The work conducted through this project discusses the mechanisms associated with coupling the water gas shift reaction (WGSR) with carbon mineralization. In addition to harnessing Ca- and Mg-bearing oxides or hydroxides that are known to be reactive for CO 2 capture, the use of earth abundant silicate minerals such as Ca- and Mg-bearing silicates, is also investigated. Key outcomes include approaches to architect Mg-silicate with well-controlled pore size distributions, probing the enhancement in H 2 yield with inherent CO 2 suppression using Ca- and Mg-bearing oxides, hydroxides, and silicates, elucidating the changes in silicate chemistry during carbon mineralization, and exploring direct integration of carbon mineralization with WGSR and the development of separate low temperature pathway for reactive CO 2 capture and mineralization are developed.

08 HYDROGEN↗

DOE OSTI2026

Particle‐Size‐Dependent Lithium‐Ion Transport in PEO/LLZO Composite Electrolytes

Lithium-metal batteries with solid electrolytes can deliver higher energy density and improved safety than conventional Li-ion batteries. Among solid electrolyte candidates, polymer/ceramic composite electrolytes are attractive because they combine polymer flexibility with the high ionic conductivity of ceramics. However, whether ceramic fillers synergistically reduce polarization losses in the polymer matrix remains unclear. A central unknown is the critical polymer/ceramic interfacial resistance (Rint,crit), below which adding ceramics lowers electrolyte overpotential. Here, we present the first macroscale model framework to quantify R int,crit for composite electrolytes based on polyethylene oxide (PEO) and Ta-doped Li 7 La 3 Zr 2 O 12 (LLZO). A 1D model for DC-polarization of tri-layer cells (PEO-LiTFSI/LLZO/PEO-LiTFSI) shows that LLZO surface functionalization reduces the PEO/LLZO interfacial resistance, consistent with electrochemical impedance measurements. Extending to a 2D composite model, we show notably that Rint,crit scales linearly with LLZO particle diameter and shifts toward experimentally accessible values (e.g., 28.8 Ωcm 2 ) as particle size increases. At fixed ceramic volume fraction, larger LLZO particles reduce the number of interfacial crossings, driving more current through the ceramic phase and lowering concentration polarization. In contrast, R int,crit is largely independent of ceramic volume fraction. These results demonstrate that ceramic filler-size engineering can enable synergistic, energy-efficient transport in polymer/ceramic composite electrolytes.

25 ENERGY STORAGE↗

DOE OSTI2025

X-ray absorption spectroscopy of lanmodulin-derived peptides bound to rare earth elements

A sustainable and robust supply chain of rare earth elements (REEs) is necessary to meet our consumer, national security and clean energy goals. However, current intra-REE separation technologies (e.g. solvent extraction) are costly and carry a heavy environmental burden. Therefore, the development of new aqueous based ligands that are selective for individual REEs will be integral in future REE production systems. To develop these ligands, an understanding of how ligand coordination structure relates to selectivity is imperative. We used X-ray absorption spectroscopy (XAS) to observe the local structure around four lanthanide (Ln) ions (La, Ce, Pr and Nd) complexed by water and several relevant chelating ligands [lanmodulin EF-hand 1 peptides (LanM1), ethylenediaminetetraacetic acid (EDTA), aminotris(methylenephosphonic acid) (ATMP) and citric acid]. To collect these liquid-phase XAS spectra, we developed a new flow cell that prevents bubble interference and beam damage to the samples. In the X-ray absorption near-edge structure (XANES), we observed energy shifts in the white line, white line broadening and differences in the white line intensity of different Ln–ligand complexes between ligands. In the extended X-ray absorption fine structure (EXAFS), we distinguished differences in peak intensity and distance between coordinating ligands. Differences in the local coordination structure between Ln–LanM1 peptide complexes were more subtle compared with the other ligands (La–water, La–EDTA, La–ATMP and La–citric acid complexes). Further XANES and EXAFS studies, in combination with modelling and other techniques, could greatly improve our structural knowledge of how these aqueous ligands bind Ln ions and how they can be used to design more selective ligands for more efficient and sustainable REE separations.

EDTA↗

DOE OSTI2024

Performance Assessment of a Dual-purpose HP-TES for a Typical Year Comparing Different Climate Zones

Complete electrification of heating and cooling systems in the United States would overload the existing electrical grid. To this end, recent research efforts have focused on energy storage as one way to reduce ever-increasing peak electricity demands. One such technology is heat pump integrated thermal-energy storage (HP-TES) systems, which can enable load-shifting and reduce demand during peak hours. In this work, a Modelica model of a 4-Ton, dual-mode (heating and cooling) HP-TES system using a room-temperature phase-change material (PCM) integrated through a secondary hydronic loop was developed and simulated for a typical meteorological year in Riverside, CA (ASHRAE Climate Zone 2B), and Chicago, IL (ASHRAE Climate Zone 5A), for a DOE small office prototype building. The COP improvement and demand reduction were analyzed during the time-of-use peak hours along with the required recharge cycle energy demand. A typical summer in Riverside, CA resulted in model-predicted peak COP increases of 50 – 100% compared to the baseline heat pump, especially at higher outdoor temperatures, coupled with maximum peak energy reductions of 22%. During shoulder and winter season simulations, heating energy savings were higher as outdoor temperatures dropped below the PCM phase change temperature. For Chicago, IL, backup heating was necessary to meet the required system capacity for very cold ambient conditions, resulting in winter peak energy savings between 16 – 60% when accounting for backup heating requirements. The recharge energy was found to be mostly below the baseline HP energy during the peak. With improved component selections and controls, the recharge energy may be reduced. The outcomes from the simulations can provide first-order estimates for potential peak energy savings, challenges, and required controls in any location before conducting any field testing.

25 ENERGY STORAGE↗

DOE OSTI2026

Shifting Valencies and Magnetic Responses in La-Based High-Entropy Oxide Perovskite Thin Films with Variable Mn Presence

Chemical disorder in compositionally complex perovskite oxides generates a broad distribution of exchange pathways and spin states, but the microscopic origin and spatial homogeneity of the resulting magnetic phases remain debated. Here, we tune the Mn fraction (x = 0.2–0.6) in epitaxial La(Cr, Mn, Fe, Co, Ni)O3 thin films and resolve the coupled evolution of valence, spin state, and magnetism using element-specific x-ray absorption spectroscopy and x-ray magnetic circular dichroism (XMCD). Mn enrichment drives an internal redistribution of charge, in which Mn evolves toward a Mn3+-rich mixed valence, while Co converts from predominantly Co3+ to high-spin Co2+. This valence/spin-state coupling amplifies the Mn- and Co-derived ferromagnetic response by nearly an order of magnitude while increasing the magnetic onset temperature to at least 250 K, whereas Fe and Cr remain essentially trivalent with weak dichroism. Depth-resolved low-energy muon spin spectroscopy (LE-μSR) shows magnetic homogeneity through the film thickness, with a secondary relaxation maximum near 25 K indicating a low-temperature dynamical crossover consistent with frustrated magnetism in a strongly disordered spin lattice.

Miertschin, Duncan [Baylor University]↗

DOE OSTI2025

Cyanobacterial circadian regulation enhances bioproduction under subjective nighttime through rewiring of carbon partitioning dynamics, redox balance orchestration, and cell cycle modulation

Abstract Background The industrial feasibility of photosynthetic bioproduction using cyanobacterial platforms remains challenging due to insufficient yields, particularly due to competition between product formation and cellular carbon demands across different temporal phases of growth. This study investigates how circadian clock regulation impacts carbon partitioning between storage, growth, and product synthesis in Synechococcus elongatus PCC 7942, and provides insights that suggest potential strategies for enhanced bioproduction. Results After entrainment to light-dark cycles, PCC 7942 cultures transitioned to constant light revealed distinct temporal patterns in sucrose production, exhibiting three-fold higher productivity during subjective night compared to subjective day despite moderate down-regulation of genes from the photosynthetic apparatus. This enhanced productivity coincided with reduced glycogen accumulation and halted cell division at subjective night time, suggesting temporal separation of competing processes. Transcriptome analysis revealed coordinated circadian clock-driven adjustment of the cell cycle and rewiring of energy and carbon metabolism, with over 300 genes showing differential expression across four time points. The subjective night was characterized by altered expression of cell division-related genes and reduced expression of genes involved in glycogen synthesis, while showing upregulation of glycogen degradation pathways, alternative electron flow components, the pentose phosphate pathway, and oxidative decarboxylation of pyruvate. These molecular changes created favorable conditions for product formation through enhanced availability of major sucrose precursors (glucose-1-phosphate and fructose-6-phosphate) and maintained redox balance through multiple mechanisms. Conclusions Our analysis of circadian regulatory rewiring of carbon metabolism and redox balancing suggests two potential approaches that could be developed for improving cyanobacterial bioproduction: leveraging natural circadian rhythms for optimizing cultivation conditions and timing of pathway induction, and engineering strains that mimic circadian-driven metabolic shifts through controlled carbon flux redistribution and redox rebalancing. While these strategies remain to be tested, they could theoretically improve the efficiency of photosynthetic bioproduction by enabling better temporal separation between cell growth, carbon storage accumulation, and product synthesis phases.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Enhanced two-dimensional ferromagnetism in van der Waals β-UTe 3 monolayers

The discovery of local-moment magnetism in van der Waals (vdW) semiconductors down to the single-layer limit has led to a paradigm shift in the understanding of two-dimensional (2D) magnets. The incorporation of strong electronic and magnetic correlations in 2D vdW metals remains a sought-after platform to enable control of emergent quantum phases and to achieve more theoretically tractable microscopic models of complex materials. To date, however, there is limited success in the discovery of such metallic vdW platforms, and f-electron monolayers remain out of reach. Here, we demonstrate that strongly correlated β–uranium tritelluride (β-UTe 3 ) can be exfoliated to the monolayer limit. Unexpectedly, β-UTe 3 remains ferromagnetic in this limit with an enhanced ordering temperature of 35 kelvin, a factor of two larger than its bulk counterpart. Our work establishes β-UTe 3 as a materials platform for investigating and modeling correlated behavior in the monolayer limit and opens numerous avenues for quantum control with, e.g., strain engineering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2026

Neutrino Beam Monitoring

Accelerator facilities produce neutrino beams from meson decays in a decay volume. Experiments measure event rates that depend on flux, cross sections, and detector response, so the flux is predicted using hadron production and beamline modeling and constrained by beam instrumentation, since near detectors alone cannot separate flux from cross section. Proton, hadron, and muon monitors can track the parent particle distributions and beam conditions, providing the inputs needed for flux predictions in long-baseline experiments such as NOvA, T2K, and DUNE. This talk reviews how beam monitors are used in practice to understand neutrino flux. Proton beam monitors tell where the beam hits the target and how stable it is. Farther downstream, hadron and muon monitors sample particles produced in meson decays. Because those muons come from the same parents as the neutrinos, their profiles reveal focusing, alignment shifts, and other changes in the beam, and they are routinely used to detect problems and guide flux predictions. The muon information can be used more quantitatively; for example, to infer the parent meson phase space, and fast radiation-hard timing detectors can add sensitivity to the momentum dependence of the focusing. These developments show both how tightly beam measurements can constrain the flux and where the current limits still lie. These approaches complement monitored-beam concepts, in which the decay region is instrumented to detect charged leptons from meson decays and to measure the neutrino flux directly.

Ganguly, Sudeshna [Fermilab] (ORCID:00000003163482↗

DOE OSTI2026

Neutrino Beam Monitoring

Ganguly, Sudeshna [Fermilab] (ORCID:00000003163482↗

DOE OSTI2025

Evolution of silicate coordination in architected amorphous and crystalline magnesium silicates during carbon mineralization

Advancing durable solutions for carbon storage and removal at the gigaton scale to produce solid carbonates via carbon mineralization requires harnessing earth abundant magnesium silicate resources. Calibrated insights linking the structural and morphological features of earth abundant amorphous and crystalline magnesium silicate phases to their reactivity are essential for scalable deployment but remain underdeveloped. To resolve the influence of silica coordination and mass transfer on carbon mineralization behavior, magnesium silicates bearing amorphous and crystalline phases (AC Mg-silicate) are synthesized. The structural and morphological transitions starting from colloidal precursors to their final synthesized form on heating are delineated using operando ultra small/small/wide angle X-ray scattering (USAXS/SAXS/WAXS) measurements. The evolution of the silicate phases on carbon mineralization of AC Mg-silicate is contrasted with that of highly crystalline Mg-silicate (HC Mg-silicate) when reacted at 200 °C and a CO 2 partial pressure of 20 atm in water and 1 M NaHCO 3 solution in stirred and unstirred environments. These experimental conditions are analogous to those of the water–gas-shift reaction for sustainable recovery of H 2 with inherent carbon mineralization. Enhancement in the extent of carbon mineralization by 13.3–19.5% noted in the presence of NaHCO 3 compared to water in AC and HC Mg-silicate with and without stirring, is attributed to the buffering effect which aids simultaneous silicate dissolution and carbon mineralization. Enhanced extents of carbon mineralization in the presence of NaHCO 3 correspond to the formation of MgSiO 3 and SiO 2 phases from the starting Mg 2 SiO 4 precursors in AC and HC Mg-silicate. Unlocking these silicate transformations during carbon mineralization by harnessing architected Mg-silicate precursors reveals the feasibility of integrating these chemical pathways with sustainable H 2 conversion pathways with inherent carbon mineralization.

Gao, Xun [Cornell Univ., Ithaca, NY (United States↗

DOE OSTI2024

Shallow Soil Response to a Buried Chemical Explosion With Geophones and Distributed Acoustic Sensing

Abstract Shallow sediments can respond non‐linearly to large dynamic strains and undergo a subsequent healing phase as the material gradually recovers following the passing of seismic waves. This study focuses on the physical changes in the subsurface caused by the shaking from a buried chemical explosion detonated in a borehole in Nevada, USA, as a part of the Source Physics Experiment Phase II. The explosion damaged the shallow subsurface and modified the frequency content recorded by 491 geophones and 2240 Distributed Acoustic Sensing (DAS) channels within 2.5 km from surface ground zero. We observe a gradual shift of resonance frequencies in the 10–25 Hz frequency band in the hours following the explosion and develop a method to characterize the related logarithm‐type healing process of the shallow (i.e., upper ∼25 m) subsurface. We find that stronger levels of ground motion increase the relative degree of damage and duration of the subsurface healing; with the spall region exhibiting the largest degree of damage and longest healing recovery time. We observe coherent spatial patterns of damage with the region located to the southeast of the explosion exhibiting more damage than the southwest region. This study demonstrates that both DAS and co‐located geophones capture similar temporal changes associated with the physical processes occurring in the subsurface, with the high‐density sampling of DAS measurements enabling a new capability to monitor the fine‐scale changes of the Earth's shallow subsurface following the detonation of a buried explosion.

Viens, Loïc↗

DOE OSTI2025

Enhancing heat pump water heater performance with embedded phase change materials thermal energy storage: First hour rating improvement and demand response operation

The increasing global emphasis on energy efficiency and sustainability has put heat pump water heaters (HPWHs) in the spotlight as an energy-efficient alternative to traditional water heating systems. However, their widespread adoption is limited by challenges such as insufficient First Hour Rating (FHR), suboptimal control mechanisms, and limited flexibility for demand response operations. Here, to address these limitations, this study proposes an innovative HPWH system integrated with embedded phase change material (PCM)-based thermal energy storage (TES). The research introduces a novel design and control strategy that leverages optimized PCM integration to enhance thermal storage capacity, improve hot water delivery during peak demand, and increase load-shifting potential. A combination of system modeling, performance simulation, and demand response control strategy evaluation was employed to quantify the benefits of PCM integration. Results demonstrate that the proposed PCM-TES HPWH system significantly enhances FHR, with an optimal 7.0 lb. of PCM increasing FHR by over 26 %—from 62 to 78 gal—for a standard 50-gal HPWH. Additionally, under advanced demand response operation using a preheat strategy, the system reduces the percentage of control temperature out-of-band time from 65 % (conventional HPWH) to just 11.6 %, enabling a more stable and efficient hot water supply. This research contributes a novel PCM-embedded HPWH design and control framework that addresses both performance and grid-interactivity challenges. The findings offer a viable pathway to enhancing the operational efficiency, flexibility, and grid responsiveness of residential water heating systems.

Demand response control↗