Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLATELET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Development of a Porcine Delayed Wound-Healing Model and Its Use in Testing a Novel Cell-Based Therapy

Purpose: A delayed full-thickness wound-healing model was developed and used for examining the capacity of adipose-derived stem cells (ASCs), either alone or in platelet-rich fibrin gels, to promote healing. Methods and Materials: Four pigs received electron beam radiation to the dorsal skin surface. Five weeks after radiation, subcutaneous fat was harvested from nonirradiated areas and processed to yield ASCs. Two weeks later, 28 to 30 full-thickness 1.5-cm{sup 2} wounds were made in irradiated and nonirradiated skin. Wounds were treated with either saline solution, ASCs in saline solution, platelet-rich plasma (PRP) fibrin gel, ASCs in PRP, or non-autologous green fluorescence protein-labeled ASCs. Results: The single radiation dose produced a significant loss of dermal microvasculature density (75%) by 7 weeks. There was a significant difference in the rate of healing between irradiated and nonirradiated skin treated with saline solution. The ASCs in PRP-treated wounds exhibited a significant 11.2% improvement in wound healing compared with saline solution. Enhancement was dependent on the combination of ASCs and PRP, because neither ASCs nor PRP alone had an effect. Conclusions: We have created a model that simulates the clinically relevant late radiation effects of delayed wound healing. Using this model, we showed that a combination of ASCs and PRP improves the healing rates of perfusion-depleted tissues, possibly through enhancing local levels of growth factors.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Peripheral Blood Lymphocyte Depletion After Hepatic Arterial {sup 90}Yttrium Microsphere Therapy for Hepatocellular Carcinoma

Purpose: The short- and long-term effects of {sup 90}Yttrium microspheres therapy for hepatocellular carcinoma (HCC) on peripheral blood lymphocytes are unknown and were therefore examined. Methods and Materials: Ninety-two HCC patients were enrolled in a {sup 90}Yttrium therapy study and routine blood counts were examined as part of standard clinical monitoring. Results: We found an early, profound, and prolonged lymphopenia. In a subsequent cohort of 25 additional HCC patients, prospective flow cytometric immune-monitoring analysis was performed to identify specific changes on distinct lymphocyte subsets (i.e., CD3, CD4, CD8 T, and CD19 B lymphocytes) and NK cells absolute numbers, in addition to the granulocytes and platelets subsets. We found that the pretreatment lymphocyte subset absolute numbers (with the exception of NK cells) had a tendency to be lower compared with healthy control values, but no significant differences were detected between groups. Posttherapy follow-up revealed that overall, all lymphocyte subsets, except for NK cells, were significantly (>50% from pretherapy values), promptly (as early as 24 h) and persistently (up to 30 months) depleted post-{sup 90}Yttrium microspheres therapy. In contrast, granulocytes increased rapidly (24 h) to compensate for lymphocyte depletion, and remained increased at 1-year after therapy. We further stratified patients into two groups, according to survival at 1 year. We found that lack of recovery of CD19, CD3, CD8, and especially CD4 T cells was linked to poor patient survival. No fungal or bacterial infections were noted during the 30-month follow-up period. Conclusions: The results show that lymphocytes (and not granulocytes, platelets, or NK cells) are sensitive to hepatic arterial {sup 90}Yttrium without associated clinical toxicity, and lack of lymphocyte recovery (possibly leading to dysregulation of adaptive cellular immunity) posttherapy indicates poor survival.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Correlation Between Radiation Dose to {sup 18}F-FDG-PET Defined Active Bone Marrow Subregions and Acute Hematologic Toxicity in Cervical Cancer Patients Treated With Chemoradiotherapy

Purpose: To test the hypothesis that radiation dose to {sup 18}F-fluorodeoxyglucose positron emission tomography ({sup 18}F-FDG-PET)-defined active bone marrow (BM{sub ACT}) subregions is correlated with hematologic toxicity in cervical cancer patients treated with chemoradiotherapy. Methods and Materials: The conditions of 26 women with cervical cancer who underwent {sup 18}F-FDG-PET before treatment with concurrent cisplatin and intensity-modulated radiation therapy were analyzed. BM{sub ACT} was defined as the subregion of total bone marrow (BM{sub TOT}) with a standardized uptake value (SUV) equal to or above the mean for that individual. Inactive bone marrow (BM{sub INACT}) was defined as BM{sub TOT} - BM{sub ACT}. Generalized linear modeling was used to test the correlation between BM{sub ACT} and BM{sub INACT} dose-volume metrics and hematologic nadirs, particularly white blood cell count (WBC) and absolute neutrophil count (ANC). Results: Increased BM{sub ACT} mean dose was significantly associated with decreased log(WBC) nadir ({beta} = -0.04; 95% CI, -0.07to -0.01; p = 0.009), decreased log(ANC) nadir ({beta} = -0.05; 95% CI, -0.08 to -0.02; p = 0.006), decreased hemoglobin nadir ({beta} = -0.16; 95% CI, -0.27 to -0.05; p = 0.010), and decreased platelet nadir ({beta} = -6.16; 95% CI, -9.37 to -2.96; p < 0.001). By contrast, there was no association between BM{sub INACT} mean dose and log(WBC) nadir ({beta} = -0.01; 95% CI, -0.06 to 0.05; p = 0.84), log(ANC) nadir ({beta} = -0.03; 95% CI, -0.10 to 0.04; p = 0.40), hemoglobin nadir ({beta} = -0.09; 95% CI, -0.31 to 0.14; p = 0.452), or platelet nadir ({beta} = -3.47; 95% CI, -10.44 to 3.50; p = 0.339). Conclusions: Irradiation of BM subregions with higher {sup 18}F-FDG-PET activity was associated with hematologic toxicity, supporting the hypothesis that reducing dose to BM{sub ACT} subregions could mitigate hematologic toxicity. Future investigation should seek to confirm these findings and to identify optimal SUV thresholds to define BM{sub ACT}.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Reduced Toxicity With Intensity Modulated Radiation Therapy (IMRT) for Desmoplastic Small Round Cell Tumor (DSRCT): An Update on the Whole Abdominopelvic Radiation Therapy (WAP-RT) Experience

Purpose: Desmoplastic small round cell tumor (DSRCT) is a rare malignancy typically involving the peritoneum in young men. Whole abdominopelvic radiation therapy (WAP-RT) using conventional 2-dimensional (2D) radiation therapy (RT) is used to address local recurrence but has been limited by toxicity. Our objectives were to assess the benefit of intensity modulated radiation therapy (IMRT) on toxicity and to update the largest series on radiation for DSRCT. Methods and Materials: The records of 31 patients with DSRCT treated with WAP-RT (22 with 2D-RT and 9 with IMRT) between 1992 and 2011 were retrospectively reviewed. All received multi-agent chemotherapy and maximal surgical debulking followed by 30 Gy of WAP-RT. A further focal boost of 12 to 24 Gy was used in 12 cases. Boost RT and autologous stem cell transplantation were nearly exclusive to patients treated with 2D-RT. Toxicities were assessed with the Common Terminology Criteria for Adverse Events. Dosimetric analysis compared IMRT and simulated 2D-RT dose distributions. Results: Of 31 patients, 30 completed WAP-RT, with a median follow-up after RT of 19 months. Acute toxicity was reduced with IMRT versus 2D-RT: P=.04 for gastrointestinal toxicity of grade 2 or higher (33% vs 77%); P=.02 for grade 4 hematologic toxicity (33% vs 86%); P=.01 for rates of granulocyte colony-stimulating factor; and P=.04 for rates of platelet transfusion. Post treatment red blood cell and platelet transfusion rates were also reduced (P=.01). IMRT improved target homogeneity ([D05-D95]/D05 of 21% vs 46%) and resulted in a 21% mean bone dose reduction. Small bowel obstruction was the most common late toxicity (23% overall). Updated 3-year overall survival and progression-free survival rates were 50% and 24%, respectively. Overall survival was associated with distant metastasis at diagnosis on multivariate analysis. Most failures remained intraperitoneal (88%). Conclusions: IMRT for consolidative WAP-RT in DSRCT improves hematologic toxicity in particular. Although the long-term efficacy of current treatment options remains disappointing, the improved therapeutic index of IMRT may aid in generalizing its use and allowing the addition of novel approaches such as intraperitoneal immunotherapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Proton Beam Craniospinal Irradiation Reduces Acute Toxicity for Adults With Medulloblastoma

Purpose: Efficacy and acute toxicity of proton craniospinal irradiation (p-CSI) were compared with conventional photon CSI (x-CSI) for adults with medulloblastoma. Methods and Materials: Forty adult medulloblastoma patients treated with x-CSI (n=21) or p-CSI (n=19) at the University of Texas MD Anderson Cancer Center from 2003 to 2011 were retrospectively reviewed. Median CSI and total doses were 30.6 and 54 Gy, respectively. The median follow-up was 57 months (range 4-103) for x-CSI patients and 26 months (range 11-63) for p-CSI. Results: p-CSI patients lost less weight than x-CSI patients (1.2% vs 5.8%; P=.004), and less p-CSI patients had >5% weight loss compared with x-CSI (16% vs 64%; P=.004). p-CSI patients experienced less grade 2 nausea and vomiting compared with x-CSI (26% vs 71%; P=.004). Patients treated with x-CSI were more likely to have medical management of esophagitis than p-CSI patients (57% vs 5%, P<.001). p-CSI patients had a smaller reduction in peripheral white blood cells, hemoglobin, and platelets compared with x-CSI (white blood cells 46% vs 55%, P=.04; hemoglobin 88% vs 97%, P=.009; platelets 48% vs 65%, P=.05). Mean vertebral doses were significantly associated with reductions in blood counts. Conclusions: This report is the first analysis of clinical outcomes for adult medulloblastoma patients treated with p-CSI. Patients treated with p-CSI experienced less treatment-related morbidity including fewer acute gastrointestinal and hematologic toxicities.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

In Vivo Imaging Reveals Significant Tumor Vascular Dysfunction and Increased Tumor Hypoxia-Inducible Factor-1α Expression Induced by High Single-Dose Irradiation in a Pancreatic Tumor Model

Purpose: To investigate the effect of high-dose irradiation on pancreatic tumor vasculature and microenvironment using in vivo imaging techniques. Methods and Materials: A BxPC3 pancreatic tumor xenograft was established in a dorsal skinfold window chamber model and a subcutaneous hind leg model. Tumors were irradiated with a single dose of 4, 12, or 24 Gy. The dorsal skinfold window chamber model was used to assess tumor response, vascular function and permeability, platelet and leukocyte adhesion to the vascular endothelium, and tumor hypoxia for up to 14 days after 24-Gy irradiation. The hind leg model was used to monitor tumor size, hypoxia, and vascularity for up to 65 days after 24-Gy irradiation. Tumors were assessed histologically to validate in vivo observations. Results: In vivo fluorescence imaging revealed temporary vascular dysfunction in tumors irradiated with a single dose of 4 to 24 Gy, but most significantly with a single dose of 24 Gy. Vascular functional recovery was observed by 14 days after irradiation in a dose-dependent manner. Furthermore, irradiation with 24 Gy caused platelet and leukocyte adhesion to the vascular endothelium within hours to days after irradiation. Vascular permeability was significantly higher in irradiated tumors compared with nonirradiated controls 14 days after irradiation. This observation corresponded with increased expression of hypoxia-inducible factor-1α in irradiated tumors. In the hind leg model, irradiation with a single dose of 24 Gy led to tumor growth delay, followed by tumor regrowth. Conclusions: Irradiation of the BxPC3 tumors with a single dose of 24 Gy caused transient vascular dysfunction and increased expression of hypoxia-inducible factor-1α. Such biological changes may impact tumor response to high single-dose and hypofractionated irradiation, and further investigations are needed to better understand the clinical outcomes of stereotactic body radiation therapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Parallel multiscale simulations of a brain aneurysm

Cardiovascular pathologies, such as a brain aneurysm, are affected by the global blood circulation as well as by the local microrheology. Hence, developing computational models for such cases requires the coupling of disparate spatial and temporal scales often governed by diverse mathematical descriptions, e.g., by partial differential equations (continuum) and ordinary differential equations for discrete particles (atomistic). However, interfacing atomistic-based with continuum-based domain discretizations is a challenging problem that requires both mathematical and computational advances. We present here a hybrid methodology that enabled us to perform the first multiscale simulations of platelet depositions on the wall of a brain aneurysm. The large scale flow features in the intracranial network are accurately resolved by using the high-order spectral element Navier–Stokes solver NεκTαr. The blood rheology inside the aneurysm is modeled using a coarse-grained stochastic molecular dynamics approach (the dissipative particle dynamics method) implemented in the parallel code LAMMPS. The continuum and atomistic domains overlap with interface conditions provided by effective forces computed adaptively to ensure continuity of states across the interface boundary. A two-way interaction is allowed with the time-evolving boundary of the (deposited) platelet clusters tracked by an immersed boundary method. The corresponding heterogeneous solvers (NεκTαr and LAMMPS) are linked together by a computational multilevel message passing interface that facilitates modularity and high parallel efficiency. Results of multiscale simulations of clot formation inside the aneurysm in a patient-specific arterial tree are presented. We also discuss the computational challenges involved and present scalability results of our coupled solver on up to 300 K computer processors. Validation of such coupled atomistic-continuum models is a main open issue that has to be addressed in future work.

60 APPLIED LIFE SCIENCES↗

Irradiation Effects on Stability of δ-UZr2 phase in U-50 wt% Zr Alloy

U-50wt%Zr is a candidate metallic nuclear fuel with potential application in light water reactors due to its excellent thermal properties and high radiation tolerance. The Zr-rich UZr fuels possess greater swelling resistance and fission gas release characteristics compared with U-rich UZr fuels. In this current study, the δ-phase U-50wt%Zr is proton irradiated at room temperature to 1 displacement per atom (dpa) to provide insights on phase stability under irradiation conditions. High resolution characterization of Transmission Electron Microscopy (TEM) and Atom Probe Tomography (APT) characterization techniques are used to elucidate microstructural changes due to irradiation. TEM and APT results show highly oriented bcc β-Zr-rich platelet precipitates nucleating adjacent to α-U phases inside the UZr 2 matrix. Formation of this platelet morphology is characteristic of Widmänstatten structure which can be attributed to a variety of factors such as differences in thermal expansion coefficient between the phases, grain size, alloy composition, and cooling rate. The phases present are distinctly different than those observed through in situ annealing, but irradiation accelerates diffusion and phase separation kinetics. These microstructural changes in U-50wt%Zr are different from those achieved by pure thermodynamic or high temperature heavy ion irradiation experiments. Finally, our work, together with previous ones, highlight the necessity to study the U-Zr phase diagram under non-equilibrium thermodynamics conditions to support this material's deployment as a viable nuclear fuel form.

36 MATERIALS SCIENCE↗

Revisiting the properties of delafossite CuCrO{sub 2}: A single crystal study

Platelet-like single-crystals of delafossite CuCrO{sub 2} have been successfully grown and characterised by X-ray diffraction and pole figures, scanning electron and atomic force microscopy. Transport measurements reveal that the resistivity is highly anisotropic, with a ratio of about 35 at 300 K between the in- and out-of-plane directions, reflecting the layered crystal structure. The magnetization and specific heat data show that CuCrO{sub 2} undergoes a unique antiferromagnetic transition at T{sub N}=24.0 K, in contrast to a recent report on CuCrO{sub 2} single-crystals showing the existence of two magnetic transitions, T{sub N1}=24.2 K and T{sub N2}=23.6 K, depending on the orientation of the applied magnetic field along and perpendicular to c, respectively. - Graphical abstract: 3R-CuCrO{sub 2} platelet-like single crystals have been successfully grown by the flux method. As revealed by {chi}(T) and C(T) measurements, their properties are characterised by a unique antiferromagnetic transition at T{sub N}=24 K. Interestingly, despite a very small magnetic anisotropy, a large one is evidenced by the resistivity ratio, {rho}{sub c}/{rho}{sub ab}{approx}35, at 300 K. This suggests an easier charge hopping in the [CrO{sub 2}] planes rather than along (Cr-O-Cu) pathways, i.e. along c axis. Highlights: Black-Right-Pointing-Pointer R-CuCrO{sub 2} plate-like single crystals have been synthesised by the flux method. Black-Right-Pointing-Pointer Growth takes place layer-by-layer and some growth defects have been observed. Black-Right-Pointing-Pointer CuCrO{sub 2} single crystals exhibit a unique antiferromagnetic transition at T{sub N}=24 K. Black-Right-Pointing-Pointer Transport measurements reveal that the resistivity is highly anisotropic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and morphological characterization of Mg{sub 0.8}Al{sub 0.2}(OH){sub 2}Cl{sub 0.2} hydrotalcite produced by mechanochemistry method

Chlorine intercalated Mg–Al layered double hydroxides (Mg–Al–Cl–LDH) with a chemical formula Mg{sub 0.8}Al{sub 0.2}(OH){sub 2}Cl{sub 0.2} were successfully produced by the one-step mechanochemistry method and subsequent water washing followed by drying in oven for 1 h at 80 °C. The samples were characterized by X-ray diffraction (XRD), Fourier Transform Infrared spectroscopy (FT–IR), field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), elemental mapping analysis, transmission electron microscopy (TEM), X-ray fluorescence (XRF), and the differential thermogravimetric analysis (DTGA). Results revealed that the structural characteristics of Mg–Al–Cl–LDH were affected strongly by milling time. At the beginning of milling (up to 1 h), Hydrotalcite (HT) and Brucite were the dominant phases, while the progressive mechanical activation was completed as milling time increased, which resulted in the formation of nanostructured Mg–Al–Cl–LDH. Based on XRD and FTIR data, Mg{sub 0.8}Al{sub 0.2}(OH){sub 2}Cl{sub 0.2} with high purity was obtained at 5 h milling. The interlayer spacing of LDH is also strongly influenced by milling time so that it escalated from 7.737±0.001 to 8.005±0.002 (1–15 h) and then decreased to 7.937±0.001 for 20 h milled sample. Electron microscopic observation displayed that the final product had hexagonal platelet structure with lateral dimension of 20–100 nm. Therefore, the synthesis of Mg{sub 0.8}Al{sub 0.2}(OH){sub 2}Cl{sub 0.2} via mechanochemistry owing to simplicity and versatility can be a promising candidate for use in catalyst carriers, drug delivery, and gene delivery. - Graphical Abstract: TEM image of milled sample (Mg–Al–Cl–LDH). - Highlights: • Chlorine intercalated LDH was synthesized by a facile solid-state process. • Structural features of products were influenced strongly by the milling time. • XRD and FTIR spectra suggested predominant Mg–Al–Cl–LDH after 5 h milling. • Products showed hexagonal platelet structure with lateral dimension of 20–100 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coherent 3D nanostructure of γ-Al{sub 2}O{sub 3}: Simulation of whole X-ray powder diffraction pattern

The structure and nanostructure features of nanocrystalline γ-Al{sub 2}O{sub 3} obtained by dehydration of boehmite with anisotropic platelet-shaped particles were investigated. The original models of 3D coherent nanostructure of γ-Al{sub 2}O{sub 3} were constructed. The models of nanostructured γ-Al{sub 2}O{sub 3} particles were first confirmed by a direct simulation of powder X–Ray diffraction (XRD) patterns using the Debye Scattering Equation (DSE) with assistance of high-resolution transmission electron microscopy (HRTEM) study. The average crystal structure of γ-Al{sub 2}O{sub 3} was shown to be tetragonally distorted. The experimental results revealed that thin γ-Al{sub 2}O{sub 3} platelets were heterogeneous on a nanometer scale and nanometer-sized building blocks were separated by partially coherent interfaces. The XRD simulation results showed that a specific packing of the primary crystalline blocks in the nanostructured γ-Al{sub 2}O{sub 3} particles with formation of planar defects on (001), (100), and (101) planes nicely accounted for pronounced diffuse scattering, anisotropic peak broadening and peak shifts in the experimental XRD pattern. The identified planar defects in cation sublattice seem to be described as filling cation non-spinel sites in existing crystallographic models of γ-Al{sub 2}O{sub 3} structure. The overall findings provided an insight into the complex nanostructure, which is intrinsic to the metastable γ-Al{sub 2}O{sub 3} oxide. - Highlights: • Thin plate-like crystallites of γ-Al{sub 2}O{sub 3} were obtained. • Models of 3D coherent nanostructure of γ-Al{sub 2}O{sub 3} were constructed. • Models were verified by simulating XRD patterns using the Debye Scattering Equation. • Specific broadening of XRD peaks was explained in terms of planar defects. • Primary crystalline blocks in γ-Al{sub 2}O{sub 3} are separated by partially coherent interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The microstructure of near-equiatomic B2/f.c.c. FeNiMnAl alloys

A microstructural analysis of two FeNiMnAl alloys, Fe{sub 30}Ni{sub 20}Mn{sub 30}Al{sub 20} and Fe{sub 25}Ni{sub 25}Mn{sub 30}Al{sub 20}, was performed by a combination of atom probe tomography and transmission electron microscopy techniques. Although the microstructures of both alloys, which consist of alternating platelets aligned along < 100> of the B2-ordered phase, are similar to B2/b.c.c. two-phase alloys previously observed in the FeNiMnAl system, the two phases present in the current alloys are B2-ordered and f.c.c., with the latter phase being heavily twinned. Very fine ({approx} 5 nm) precipitates, whose chemistry was similar to that of the f.c.c. (Fe, Mn)-rich phase, were found within the B2 (Ni, Al)-rich phase in both alloys. - Highlights: {yields} The microstructures of the novel alloys Fe{sub 30}Ni{sub 20}Mn{sub 30}Al{sub 20} and Fe{sub 25}Ni{sub 25}Mn{sub 30}Al{sub 20} were characterized. {yields} Atom probe tomography and transmission electron microscopy were used in the study. {yields} A < 100>-aligned B2-ordered phase and heavily-twinned f.c.c. phase were present. {yields} Very fine (Fe, Mn)-rich precipitates were found within the B2 (Ni, Al)-rich phase.

36 MATERIALS SCIENCE↗

Evaluation of microstructural development in electron beam melted Ti-6Al-4V

In the current work an investigation of the microstructures of EBM built Ti-6Al-4V test bars has been performed using OM, SEM, TEM and XRD. It has been found that the prior {beta} phase, that formed during the initial solidification, possesses a column shaped morphology with growing direction parallel to built direction. Typical ({alpha} + {beta}) structures namely Widmanstaetten {alpha} platelets with rod-like {beta} phase formed on the interfaces of the fine {alpha} grains, have been observed in the columnar prior {beta} grains. Grain boundary {alpha} phase was found to be formed around the boundaries of the columnar prior {beta} grains. Different phases present in the parts, especially the BCC {beta} phases have been characterized. The TEM/EDX results indicate very high V composition in the {beta} phase. Results of TEM/SAED and XRD also revealed that a superlattice structure could be present in the {beta} phase. Phase transformation sequence is discussed according to the processing history and the microstructures observed. - Highlights: Black-Right-Pointing-Pointer {alpha} + {beta} and individual {beta} phase is observed and characterized by SEM, TEM and XRD. Black-Right-Pointing-Pointer {beta}-phase is identified as rod-like structure embedded in {alpha} matrix and platelets. Black-Right-Pointing-Pointer Phase transformation sequence is discussed as per thermal history and microstructures.

36 MATERIALS SCIENCE↗

Precipitation behavior of α phase during aging treatment in a β-quenched Ti-7333

Highlights: • The precipitation behaviors of α precipitate are investigated in the hot-rolled Ti-7333. • The formation of the V-shaped α configuration is closely related to the variant selection of α phase. • The angle between the closely packed direction of α{sub GB} and GB plane plays a key role on the precipitation of α{sub GB}. - Abstract: In this work, the precipitation behavior of α phase during the isothermal aging treatment was investigated in the β-quenched Ti-7333. The results indicate that dislocations contribute to the precipitation of α phase with a dot-like morphology at the beginning of aging treatment, and these dot-like α precipitates holding the same Burgers orientation relationship (BOR) with respect to the β matrix coalesce into the platelet morphology. The platelet-like α precipitates that orientate to different growth directions combine with each other to form the V-shaped configuration. And the formation of this configuration is closely related with the variant selection (VS) of α phase, which is resulted from the perfect accommodation of transformation strain within the β matrix. Meanwhile, it is found that low-angle grain boundaries (LAGBs) and high-angle grain boundaries (HAGBs) can be decorated by α phase during the aging treatment, and its precipitation degree significantly depends on the angle between the closely packed direction of αGB and the GB plane. The volume fraction of α phase increases with increasing aging time, and this increasing volume fraction eventually results in the increase in micro-hardness of the alloy.

36 MATERIALS SCIENCE↗

Crystallization and microstructure of glasses in the system Na{sub 2}O/MnO/SiO{sub 2}/Fe{sub 2}O{sub 3}

Glasses with the compositions (100 - x)(0.16Na{sub 2}O/0.10MnO/0.74SiO{sub 2})/xFe{sub 2}O{sub 3}, (x = 5-30) and 16Na{sub 2}O/10MnO/(74 - y)SiO{sub 2}/yFe{sub 2}O{sub 3} (y = 5-30) were studied using X-ray diffraction and scanning electron microscopy. The effect of the chemical composition and the thermal history on the phase formation and the resulting microstructure was investigated. During cooling, the precipitation of ferrimagnetic solid solutions Fe{sub 3}O{sub 4}/Mn{sub 3}O{sub 4} was observed. These crystals show dendritic or platelet shape, whereby the platelets are ferromagnetic and the dendrites - mainly paramagnetic. The tendency towards crystallization can be suppressed by increasing the Na{sub 2}O-concentration. In contrast to glasses without manganese oxide, the precipitation of hematite is not observed. Therefore, the addition of reducing agents is not required, in order to crystallize large volume concentrations of the ferrimagnetic phase.

36 MATERIALS SCIENCE↗

Controlled synthesis of mesoporous {alpha}-Fe{sub 2}O{sub 3} nanorods and visible light photocatalytic property

Graphical abstract: Porous {alpha}-Fe{sub 2}O{sub 3} nanorods were prepared by a facile hydrothermal process of Fe(NO{sub 3}){sub 3}{center_dot}9H{sub 2}O in NaOH aqueous solution combined with calcination method. The rod structure can be well controlled via NaOH quantity and exhibits a high BET surface area of 105.1 m{sup 2} g{sup -1}. The as-obtained porous {alpha}-Fe{sub 2}O{sub 3} nanorods show good reusability and superior visible-light photocatalytic activity in degradation of MB compared to hematite nanoparticles and microplates. Considering the excellent photocatalytic activity, recycling stability, and facile preparation method, the porous {alpha}-Fe{sub 2}O{sub 3} nanorods are believed to have potential application in the field of photocatalysis. Highlights: Black-Right-Pointing-Pointer Porous {alpha}-Fe{sub 2}O{sub 3} nanorods with typical pore size of 2-4 nm were controlled prepared. Black-Right-Pointing-Pointer The porous {alpha}-Fe{sub 2}O{sub 3} nanorods exhibit a high BET surface area of 105.1 m{sup 2} g{sup -1} and a pore volume of 0.13 m{sup 3} g{sup -1}. Black-Right-Pointing-Pointer It exhibits excellent visible-light photocatalytic activity and reusability in degradation of MB, in comparison to {alpha}-Fe{sub 2}O{sub 3} nanoparticles and platelets. -- Abstract: Porous {alpha}-Fe{sub 2}O{sub 3} nanorods with typical pore size of 2-4 nm were controlled prepared by a facile hydrothermal process of Fe(NO{sub 3}){sub 3}{center_dot}9H{sub 2}O aqueous solution in the presence of NaOH, followed by a calcination treatment. Contrast experiments indicate that the morphology and crystalline structure of the hydrothermal products depend greatly on the quantity of NaOH. Hematite nanoparticles and microplates were respectively obtained under conditions without or with excess NaOH. The porous {alpha}-Fe{sub 2}O{sub 3} nanorods exhibit a high BET surface area of 105.1 m{sup 2} g{sup -1} and a pore volume of 0.13 m{sup 3} g{sup -1}. UV-vis measurement shows wide absorption to visible light and an obvious blue-shift of the adsorption edge due to the quantum size effect. The visible-light photocatalytic performances of the as-prepared samples were evaluated by photocatalytic decolorization of methylene blue at ambient temperature. The results indicate that the photocatalytic activity of the porous {alpha}-Fe{sub 2}O{sub 3} nanorods is superior to hematite nanoparticles and platelets and exhibit good reusable feature. The photocatalytic process of porous structure is determined to be pseudo-first-order reaction with apparent reaction rate constant of 1.04 Multiplication-Sign 10{sup -2} min{sup -1}. And the optimum photocatalyst dosage is 20 mg per 100 mL of dye solution. The porous {alpha}-Fe{sub 2}O{sub 3} nanorods are considered potential photocatalyst for practical application due to the excellent photocatalytic behavior and good reusability.

36 MATERIALS SCIENCE↗

The simple preparation of birnessite-type manganese oxide with flower-like microsphere morphology and its remarkable capacity retention

Graphical abstract: Flower-like birnessite-type manganese oxide microspheres with large specific surface area and excellent electrochemical properties have been prepared by a facile hydrothermal method. Highlights: ► Birnessite-type manganese oxide with flower-like microsphere morphology and large specific surface area. ► A facile low-temperature hydrothermal method. ► Novel flower-like microsphere consists of the thin nano-platelets. ► Birnessite-type manganese oxide exhibits an ideal capacitive behavior and excellent cycling stability. -- Abstract: Birnessite-type manganese oxide with flower-like microsphere morphology and large specific surface area has been prepared by hydrothermal treating a mixture solution of KMnO{sub 4} and (NH{sub 4}){sub 2}SO{sub 4} at 90 °C for 24 h. The obtained material is characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and N{sub 2} adsorption–desorption. Results indicate that the birnessite-type manganese oxide shows novel flower-like microsphere morphology and a specific surface area of 280 m{sup 2} g{sup −1}, and the flower-like microsphere consists of the thin nano-platelets. Electrochemical characterization indicates that the prepared material exhibits an ideal capacitive behavior with a capacitance value of 278 F g{sup −1} in 1 mol L{sup −1} Na{sub 2}SO{sub 4} aqueous solution at a scan rate of 5 mV s{sup −1}. Moreover, the prepared manganese oxide electrode shows excellent cycle stability, and the specific capacitance can maintain 98.6% of the initial one after 5000 cycles.

36 MATERIALS SCIENCE↗

Conduction and magnetization improvement of BiFeO{sub 3} multiferroic nanoparticles by Ag{sup +} doping

Graphical abstract: HRTEM micrographs of the samples BiFeO{sub 3}. - Highlights: • Flash auto combustion method was successful in the preparation of Ag doped BiFeO{sub 3} in nanosize. • Ag doping results in hexagonal platelet shapes up to x = 0.10, at x ≥ 0.15 needle shape predominates. • Mixed conduction is obtained in Ag doped samples. • This nanometric multiferroic could be recommended as attractive cathode for solid oxide fuel cell. - Abstract: Nanometric multiferroic namely Ag doped (BiFeO{sub 3}) was synthesized using flash auto combustion technique and glycine as a fuel. Single phase rhombohedral–hexagonal perovskite structure was obtained by annealing at 550 °C, as determined from XRD. High resolution transmission electron microscope (HRTEM) clarifies the hexagonal platelet shape with size 17.9 nm. Maximum room temperature AC conductivity was obtained at Ag content of x = 0.10. The results of this study promote the use of such multiferroic in solid oxide fuel cell applications.

36 MATERIALS SCIENCE↗