Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLATES, FLAT - DRAG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Transient-forced convection film boiling on an isothermal flat plate

An approach for the solution of transient-forced convection film boiling on an isothermal flat plate using the boundary layer model is developed. The similarity variables are used to convert the governing partial differential equations to ordinary ones. The results of numerical solutions of these ordinary equations indicate that the transient process can be classified as one-dimensional conduction, intermediate, and the steady state regions. The time required for the one-dimensional conduction and the time necessary to attain a steady state condition are obtained. The influence of interfacial shear is seen to be negligible while the Prandtl Number and the ratio (C sub p delta T divided by h sub fg times Pr) have major influence. The use of local similarity approximations for the intermediate regime facilitates prediction of complete boundary layer growth. Using the ratio of time at any instant to the steady state time as abscissa, the curves representing the boundary layer growth can be merged into a single mean curve within 5 percent. Further, the analysis shows that the average rate of heat transfer during transient is 50 to 100 percent higher than those at steady state. The average rate of vapor convected away is 10 to 15 percent lower than at steady state while the average rate of accumulation to form the vapor layer is 1 to 14 times larger. Further, the total heat transferred during transient increases and the evaporation decreases for increasing values of C sub p delta T divided by h sub fg times Pr

Nagendra, H. R.↗
NASA NTRS1972

A study of microwave leakage through perforated flat plates.

A simple formula useful for predicting leakage through a circular hole array in a metallic flat plate is presented. A correction is given for plate thickness. The formula is applicable to arrays having either a 60-deg (staggered) or 90-deg (square) hole pattern, but is restricted to the case of (1) an obliquely incident plane wave with the E field polarized normal to the plane of incidence, and (2) large transmission loss. When theoretical values were compared to experimental data obtained on test samples having transmission losses greater than 20 dB, the agreement between theory and experiment was typically better than 1 dB at S band and 2 dB at X band.

Otoshi, T. Y.↗
NASA NTRS1974

Application of wave mechanics theory to fluid dynamics problems: Flat plate flow

The characteristics of the flow in the laminar boundary layer along an infinitely long flat plate are discussed. The flow may be disturbed or not, depending on the situation. The physical, natural aspects of the flow, either a laminar flow free from disturbances or a flow which originally is a laminar one with disturbances superimposed upon it. Oscillograms of turbulence in wind tunnel tests and in the wake of a cylinder are presented.

Krzywoblocki, M. Z. V.↗
NASA NTRS1978

A graphical approach to the efficiency of flat-plate collectors

A nomogram is described which can be used to determine the thermal performance of flat plate solar collectors, resulting in two performance factors: the net absorptance and the net heat loss coefficient. The nomogram takes into account angle of incidence, collector slope, absorber plate design, insulating materials, thicknesses, optical properties of absorbing surfaces and glazing materials, and flow factors. A case example is given to illustrate the use of the nomogram.

Selcuk, M. K.↗
NASA NTRS1982

The symmetric turbulent wake of a flat plate

Detailed measurements of mean flow and turbulence in the developing symmetric wake of a smooth, flat plate are presented. The results are discussed in the light of previous data and theories for near and far wakes. It is shown that evolution of the upstream boundary layers into the classical asymptotic wake occurs in three quite distinct stages and takes about 350 wake momentum thicknesses.

Ramaprian, B. R.↗
NASA NTRS1982

Flat Plate Solar Array Project: Proceedings of the 20th Project Integration Meeting

Progress made by the Flat-Plate Solar Array Project during the period November 1981 to April 1982 is reported. Project analysis and integration, technology research in silicon material, large-area silicon sheet and environmental isolation, cell and module formation, engineering sciences, and module performance and failure analysis are covered.

Mcdonald, R. R.↗
NASA NTRS1985

Effects of velocity profile and inclination on dual-jet-induced pressures on a flat plate in a crosswind

An experimental study was conducted to determine surface pressure distributions on a flat plate with dual subsonic, circular jets exhausting from the surface into a crossflow. The jets were arranged in both side-by-side and tandem configurations and were injected at 90 deg and 60 deg angles to the plate, with jet-to-crossflow velocity ratio of 2.2 and 4. The major objective of the study was to determine the effect of a nonuniform (vs uniform) jet velocity profile, simulating the exhaust of a turbo-fan engine. Nonuniform jets with a high-velocity outer annulus and a low-velocity core induced stronger negative pressure fields than uniform jets with the same mass flow rate. However, nondimensional lift losses (lift loss/jet thrust lift) due to such nonuniform jets were lower than lift losses due to uniform jets. Changing the injection angle from 90 deg to 60 deg resulted in moderate (for tandem jets) to significant (for side-by-side jets) increases in the induced negative pressures, even though the surface area influenced by the jets tended to reduce as the angle decreased. Jets arranged in the side-by-side configuration led to significant jet-induced lift losses exceeding, in some cases, lift losses reported for single jets.

Jakubowski, A. L.↗
NASA NTRS1993

On the instability of hypersonic flow past a flat plate

Qualitative features of the inviscid instability characteristics of hypersonic boundary-layer flows over a flat plate are considered. The instability of a viscous hypersonic boundary layer which exists far downstream from the leading edge of the plate. It is shown that the vorticity mode of instability operates on a different lengthscale from that obtained using a Chapman viscosity law. The growth rate predicted by a linear viscosity law is found to overestimate the size of the growth rate. The inviscid instability of the boundary layer near the leading edge interaction zone is discussed focusing on the strong-interaction zone which occurs sufficiently close to the leading edge. The vorticity mode in this regime is found to be unstable.

Blackaby, Nicholas D.↗
NASA NTRS1996

Investigation of the Interaction of External Disturbances with Roughened Flat Plate Boundary Layer

The interaction of an external disturbance with a laminar boundary layer over a flat plate with distributed roughness is investigated using combined experimental and numerical methods. The experiment is modeled with an unsteady boundary layer code using second order backward differencing. The simulation includes the second order scattering from roughness elements at and near the first streamwise station of predicted boundary layer instability. A comparison of experimental measurements of the boundary layer perturbation due to the wake from a vibrating ribbon with the computed first order forced boundary layer perturbation showed excellent agreement. Second order roughness induced eigenfunctions from boundary layer theory are examined and compared with other forms of excitation

Davis, Sanford S.↗
NASA NTRS2016

Flat Plate Wake Velocity Statistics Obtained With Circular And Elliptic Trailing Edges

The near wake of a flat plate with circular and elliptic trailing edges is investigated with data from direct numerical simulations. The plate length and thickness are the same in both cases. The separating boundary layers are turbulent and statistically identical. Therefore the wake is symmetric in the two cases. The emphasis in this study is on a comparison of the wake-distributions of velocity components, normal intensity and fluctuating shear stress obtained in the two cases.

CFD↗