Results for “POTENTIAL GRADIENT” — Page 14

DOE OSTI2024

Picturing QCD jets in anisotropic matter: from jet shapes to energy energy correlators

Abstract Recent theoretical developments in the description of jet evolution in the quark gluon plasma have allowed to account for the effects of hydrodynamic gradients in the medium modified jet spectra. These constitute a crucial step towards using jets as tomographic probes of the nuclear matter they traverse. In this work, we complement these studies by providing leading order calculations of widely studied jet observables, taking into account matter anisotropies. We show that the energy distribution inside a jet is pushed towards the direction of the largest matter anisotropy, while the away region is depleted. As a consequence, the jet mass and girth gain a non-trivial azimuthal dependence, with the average value of the distribution increasing along the direction of largest gradients. However, we find that, for these jet shapes, matter anisotropic effects can be potentially suppressed by vacuum Sudakov factors. We argue that the recently proposed measurements of energy correlations within jets do not suffer from such effects, with the azimuthal dependence being visible in a large angular window, regardless of the shape of the distribution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Gyrokinetic simulations of momentum flux parasitic to free-energy transfer

Ion Landau damping interacts with a portion of the E×B drift to cause a non-diffusive outward flux of co-current toroidal angular momentum. Quantitative evaluation of this momentum flux requires nonlinear simulations to determine fL, the fraction of fluctuation free energy that passes through ion Landau damping, in fully developed turbulence. Nonlinear gyrokinetic simulations with the GKW code confirm the presence of the systematic symmetry-breaking momentum flux. For simulations with adiabatic electrons, fL scales inversely with the ion temperature gradient, because only the ion curvature drift can transfer free energy to the electrostatic potential. Although kinetic electrons should in principle relax this restriction, the ion Landau damping measured in collisionless kinetic-electron simulations remained at low levels comparable with ion-curvature-drift transfer, except when magnetic shear was strong. A set of simulations scanning the electron pitch-angle scattering rate showed only a weak variation of fL with the electron collisionality. However, collisional-electron simulations with electron temperature greater than ion temperature unambiguously showed electron-curvature-drift transfer supporting ion Landau damping, leading to a corresponding enhancement of the symmetry-breaking momentum flux.

intrinsic rotation↗

DOE OSTI2022

Foam Fracturing Study for Stimulation Development of Enhanced Geothermal Systems

The large thermal gradients and high subsurface temperatures of the western region of the U.S. hold great potential for the implementation of enhanced geothermal systems (EGS). The development of these potential EGS resources requires stimulation of the reservoir to enhance permeability and it has been widely reported that a substantial amount of water will be required should conventional hydraulic stimulation be used. This presents a huge challenge and a high risk to the geothermal development because the water stress1 in these areas is already high or extremely high. The use of foam, a gas/liquid mixture predominantly composed of gas, in fracturing is considered and explored in this project as a potential approach to address water concerns with hydraulic stimulation in the development of EGS. This project, led by Oak Ridge National Laboratory (ORNL) in collaboration with Temple University, was awarded in an open lab call in 2018, and was part of the DOE GTO waterless stimulation initiative. The goal of the project was to demonstrate the feasibility of foam fracturing for EGS development through two primary tasks: Task 1: Laboratory study of the effectiveness of foam fracturing for representative geological materials, including cyclic pressurization using foam (led by ORNL) and Task 2: High temperature foam material selection and characterization (led by Temple University). In FY19, ORNL finished the critical review on serval issues associated with foam fracturing and the implementation of the proposed tasks in a lab study (Wang, et al., 2019), and completed the foam fracturing testing using cement as a model material (Wang, et al, 2020a). The work at ORNL was geared up to develop a brand-new foam testing system in FY20. The purchase of main components for the new system was finished in the first half of the FY20. The assembly of the foam testing system and foam fracturing testing were completed in the second half of the FY20 (Wang, et al., 2021a). Task 1 required the development of a test system which can be used to perform hydraulic fracturing of geological specimens with both water and foamed liquids at pressure up to 6,000 psi (41.4 MPa). The system possesses several capabilities that conventional injection systems lack for hydraulic fracturing. In addition to its ability to generate foam with controlled quality, it is capable of cycling pressure levels between specified values up to frequencies of 50 Hz. The latter capability was developed to evaluate the hypothesis that cyclic loading of samples would produce enhanced fracturing. The system consists of two sections: one for foam generation and another for foam injection. The foam is generated through separate control and pressurization of liquid and gas phases with controlled flow rates. The injection section is equipped with a low-flow Coriolis flow that monitors the density of foam to ensure the injection is in the range of target foam quality2. Experimental results of foam fracturing are reported for cylindrical granite specimens using water and aqueous N2 foam as the fracturing fluids. All experiments were performed for unconfined conditions. The effects of injection mode (i.e., monotonic vs cyclic pressurization) on breakdown pressure and failure response sample were investigated using water alone as a fracturing fluid and foams with a range of compositions. It was found that in the case of monotonic injection, the breakdown pressure of granite specimens tended to be slightly higher when fracturing with foam. Additionally, with a foam quality of 90%, the water use can be reduced by 50 to 84%, depending on hole size. On the other hand, it was observed that the breakdown pressure can be brought down to 70% of the monotonic breakdown pressure by using low cycle fatigue. Finally, discussions are presented regarding injectivity and water use reduction.

15 GEOTHERMAL ENERGY↗

DOE OSTI2024

Density functional theory of material design: fundamentals and applications—II

Abstract This is the second and the final part of the review on density functional theory (DFT), referred to as DFT-II. In the first review, DFT-I, we have discussed wavefunction-based methods, their complexity, and basics of density functional theory. In DFT-II, we focus on fundamentals of DFT and their implications for the betterment of the theory. We start our presentation with the exact DFT results followed by the concept of exchange-correlation (xc) or Fermi-Coulomb hole and its relationship with xc energy functional. We also provide the exact conditions for the xc-hole, xc-energy and xc-potential along with their physical interpretation. Next, we describe the extension of DFT for non-integer number of electrons, the piecewise linearity of total energy and discontinuity of chemical potential at integer particle numbers, and derivative discontinuity of the xc potential, which has consequences on fundamental gap of solids. After that, we present how one obtains more accurate xc energy functionals by going beyond the LDA. We discuss the gradient expansion approximation (GEA), generalized gradient approximation (GGA), and hybrid functional approaches to designing better xc energy functionals that give accurate total energies. However, these functionals fail to predict properties like the ionization potential and the band gap. Thus, we next describe different methods of modelling these potentials and results of their application for calculation of the band gaps of different solids to highlight accuracy of different xc potentials. Finally, we conclude with a glimpse on orbital-free density functional theory and the machine learning approach.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Single-ion addressing via trap potential modulation in global optical fields

To date, individual addressing of ion qubits has relied primarily on local Rabi or transition frequency differences between ions created via electromagnetic field spatial gradients or via ion transport operations. Alternatively, it is possible to synthesize arbitrary local one-qubit gates by leveraging local phase differences in a global driving field. Here we report individual addressing of 40 Ca + ions in a two-ion crystal using axial potential modulation in a global gate laser field. We characterize the resulting gate performance via one-qubit randomized benchmarking, applying different random sequences to each co-trapped ion. We identify the primary error sources and compare the results with single-ion experiments to better understand our experimental limitations. These experiments form a foundation for the universal control of two ions, confined in the same potential well, with a single gate laser beam.

quantum computing↗

DOE OSTI2025

STEM Ptychographic Holography of Electric and Magnetic Potentials

The development of fast an efficient direct electron imaging detectors have enabled the advancement of phase-imaging techniques in STEM such as iterative ptychography. As beneficial as these techniques are to imaging phase objects, the information recorded in the raw data is due to phase gradients across the probe, so it can be challenging to reconstruct slowly varying phase at lower spatial frequencies such as those induced by electric or magnetic potentials within the specimen. STEM holography [1,2] is an interferometric 4D-STEM technique where electrons in the beam are coherently divided into a superposition of two or more spatially separated probes which are then scanned over the specimen. For example, in a two-beam superposition, the two probes form overlapping bright field discs at the detector which then interfere (left of Fig. 1). Furthermore, if one probe passes through vacuum while the other transmits through the specimen, the resulting relative phase shift can be measured by recording shifts in the interference pattern. STEM holography is thus directly sensitive to the phase of the probe relative to the reference beam, and this phase can be measured regardless of the convergence angle of the probe, unlike single beam ptychography.

Biological Sciences↗

DOE OSTI2022

Selected results from full-core hydrogen redistribution asymptotic analysis in YH-moderated heat-pipe cooled microreactor

Yttrium hydride is the main candidate for moderation of high temperature nuclear microreactors . This is due to its high thermal stability and relatively high hydrogen retention at temperatures exceeding 870 C. One of the main issues associated with the use of yttrium hydride is that, when exposed to temperature, stress, or concentration gradients, the hydrogen contained in the metallic matrix tends to redistribute and leak from the moderating elements, potentially leading to reactivity losses and power swings. This paper is focused on presenting selected results from the asymptotic hydrogen redistribution analysis performed on the Simplified Microreactor Benchmark Assessment (SiMBA) problem, a microreactor core conceptual design developed at INL. The analysis is based on full core analysis, relies uniquely on Bison to perform hydrogen redistribution calculations, and discusses the physical causes of the reactivity feedback. It was found that the feedback is negative, but it is one order of magnitude lower than the one found for the empire reactor unit-cell. This is due to the lower axial temperature gradient together with the effect of the reflector.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2023

Comparing the response of the indigenous microbial community to crude oil amendment in oxic versus hypoxic conditions

The Caspian Sea is the world’s largest landlocked saline lake which lies between Europe and Asia. This region is particularly known for its large-scale oil reserves, pipelines, and drilling activities, which have contributed to the environmental decline of this lake. In addition to pollution from the petroleum industry, drainage from various river basins brings an influx of residential, industrial, and agricultural effluents that induce eutrophication and hypoxic conditions in deeper, colder waters, creating an oxygen gradient. The temperature and oxygen stratification in this environment has presented a unique opportunity to investigate the potential of the biodegradative processes carried out by the indigenous microbial community. We believe these indigenous microbes possess different metabolic capabilities to degrade oil as they adapted to declining oxygen concentrations and temperatures with increasing depths over a prolonged period. Hence, community structure and composition will vary with depth. Microcosms were set up to observe the indigenous microbial reaction after a 60 ppm native crude oil amendment over 115 days. Surface water microcosms were incubated at 28ºC and aerated while deep water microcosms were incubated at 8ºC under anaerobic conditions. These two environmental conditions represent the temperature and oxygen extremes along the gradient and were selected as we try to simulate the indigenous community’s response to this oil contamination. DNA was extracted and amplified from these microcosms and sequenced. Bioinformatic analysis was performed to track changes in the abundance of taxa present and biodiversity over different time points to show the progression of community structure. All microcosms showed the presence of hydrocarbon-degrading phyla, whose presence is consistent with other reports from oil-enriched environments. However, distinct communities were observed in oxic versus hypoxic microcosms. Orders of Bacteria related to sulfate and nitrogen cycling were found in hypoxic microcosms, indicating a possible mechanism for the anaerobic biodegradation of crude oil. GC-MS analysis of initial and final microcosms also provided evidence of degradation of hydrocarbon fractions in both warm, oxic and cold, hypoxic conditions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Preliminary Observations on the Hydrogen Redistribution Feedback in YH-Moderated Monolithic Microreactors.

Nuclear microreactors promise to open new markets for nuclear industry. This is due to their potential competitive cost in non-traditional market segments, e.g., mines, forward military basis, extraterrestrial surfaces and remote areas, and inherently safe characteristics that make them deployable where other power sources are not available or difficult to exploit. Transition metal dihydrides have been considered among the most promising candidates for moderating nuclear microreactors. In particular, yttrium hydride (YH\textsubscript{x}) has been selected for high temperature applications due to its high thermal stability and relatively high hydrogen retention at temperatures exceeding $870^\circ C$. One of the main issues associated with the use of hydrides is that, when exposed to temperature, stress, or concentration gradients, the hydrogen contained in the metallic matrix tends to redistribute and leak from the moderating elements, potentially leading to reactivity losses and power swings. The purpose of this paper is to gain a better physical understanding of the neutronic feedback associated with the hydrogen redistribution in YH\textsubscript{x}, by using Griffin and Bison. This feedback is inherently multiphysics, since the hydrogen distribution is strongly dependent on the moderator temperature spatial distribution. In particular, we want to understand the sign (+/-) of the neutronic feedback, its order of magnitude, and its underlying physical causes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2026

Unlocking plant-microbial interactions in deep Mollisols in the Midwestern US: Linking depth gradients in roots, microbial activity, and soil carbon in agroecosystems

Deep-rooted plants may build soil carbon (C) stocks, but most research has focused on shallow soils, leaving gaps in our understanding of how shifts in the balance between decomposition and C inputs drive soil C accumulation with depth. Thus, our objectives were to: (1) link depth gradients in root biomass with microbial activity and soil C stocks down to 1 m, and (2) examine the potential of simple C inputs to prime soil C across depths. To this end, we dug 5 quantitative soil pits in Argiudolls under mature perennial miscanthus plots in the SoyFACE Farm (Champaign-Urbana, IL). We added 13 C labeled glucose to our soils to determine the fate of simple C inputs with depth. We found that fine root biomass, total soil C, mineral-associated organic C (MAOC), particulate organic C (POC), and microbial activity (as measured by potential enzyme activity) declined with depth. POC declined more rapidly than MAOC, resulting in an increase in the ratio of MAOC-to-POC. Root biomass, enzyme activity (either acid phosphatase or n-acetyl-glucosaminadase) activity, and microbial respiration explained 74% and 38% of the variability in soil total C and MAOC, respectively, while POC was dependent on root biomass and microbial respiration (47%). Although the incorporation of simple 13 C inputs into MAOC was similar across depths, these inputs led to greater net MAOC losses in shallow soils than in deeper soils between 50 and 100 cm. The divergent impact of simple C inputs across depths may suggest that MAOC in shallow soils is more susceptible to priming losses, while C inputs into deep soils may instead be more persistent. Collectively, our results suggest that depth gradients in soil C stocks represents a balance between inputs, decomposition, and microbial necromass production and that increases in root C inputs by deep-rooted plants may have the potential to build stable MAOC.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2024

Microscopic understanding of the effects of impurities in low RRR SRF cavities

The SRF community has shown that introducing certain impurities into high-purity niobium can improve quality factors and accelerating gradients. We question why some impurities improve RF performance while others hinder it. The purpose of this study is to characterize the impurities of niobium coupons with a low residual resistance ratio (RRR) and correlate these impurities with the RF performance of low RRR cavities so that the mechanism of impurity-based improvements can be better understood and improved upon. The combination of RF testing, temperature mapping, frequency vs temperature analysis, and materials studies reveals a microscopic picture of why low RRR cavities experience low BCS resistance behavior more prominently than their high RRR counterparts. We evaluate how differences in the mean free path, grain structure, and impurity profile affect RF performance. The results of this study have the potential to unlock a new understanding on SRF materials and enable the next generation of high Q/high gradient surface treatments.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Microscopic Understanding of the Effects of Impurities in Low RRR SRF Cavities

The SRF community has shown that introducing certain impurities into high-purity niobium can improve quality factors and accelerating gradients. We question why some impurities improve RF performance while others hinder it. The purpose of this study is to characterize the impurities of niobium coupons with a low residual resistance ratio (RRR) and correlate these impurities with the RF performance of low RRR cavities so that the mechanism of impurity-based improvements can be better understood and improved upon. The combination of RF testing, temperature mapping, frequency vs temperature analysis, and materials studies reveals a microscopic picture of why low RRR cavities experience low BCS resistance behavior more prominently than their high RRR counterparts. We evaluate how differences in the mean free path, grain structure, and impurity profile affect RF performance. The results of this study have the potential to unlock a new understanding on SRF materials and enable the next generation of high Q/high gradient surface treatments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Microscopic Understanding of the Effects of Impurities in Low RRR SRF Cavities

The SRF community has shown that introducing certain impurities into high-purity niobium can improve quality factors and accelerating gradients. We question why some impurities improve RF performance while others hinder it. The purpose of this study is to characterize the impurities of niobium coupons with a low residual resistance ratio (RRR) and correlate these impurities with the RF performance of low RRR cavities so that the mechanism of impurity-based improvements can be better understood and improved upon. The combination of RF testing, temperature mapping, frequency vs temperature analysis, and materials studies reveals a microscopic picture of why low RRR cavities experience low BCS resistance behavior more prominently than their high RRR counterparts. We evaluate how differences in the mean free path, grain structure, and impurity profile affect RF performance. The results of this study have the potential to unlock a new understanding on SRF materials and enable the next generation of high Q/high gradient surface treatments.

Howard, K.↗

DOE OSTI2024

Microscopic understanding of the effects of impurities in low RRR SRF cavities

The SRF community has shown that introducing certain impurities into high-purity niobium can improve quality factors and accelerating gradients. We question why some impurities improve RF performance while others hinder it. The purpose of this study is to characterize the impurities of niobium coupons with a low residual resistance ratio (RRR) and correlate these impurities with the RF performance of low RRR cavities so that the mechanism of impurity-based improvements can be better understood and improved upon. The combination of RF testing, temperature mapping, frequency vs temperature analysis, and materials studies reveals a microscopic picture of why low RRR cavities experience low BCS resistance behavior more prominently than their high RRR counterparts. We evaluate how differences in the mean free path, grain structure, and impurity profile affect RF performance. The results of this study have the potential to unlock a new understanding on SRF materials and enable the next generation of high Q/high gradient surface treatments.

Howard, K.↗

DOE OSTI2021

Carrier gradients and the role of charge selective contacts in lateral heterojunction all back contact perovskite solar cells

Realizing photovoltaic devices that achieve the full potential of the metal halide perovskite material will require improved insight regarding the role of selective contacts and how key interfaces operate when mobile defects are present. However, measuring interface properties in typical device stacks where the perovskite layer is thin and sandwiched between two contacts has been a challenge. Here, we fabricate p-i-n and p-n lateral heterojunctions with nickel oxide/titanium oxide all back contacts, permitting us to employ a comprehensive analysis approach, including ultraviolet and X-ray photoemission spectroscopy (UPS/XPS), angle-resolved X-ray absorption spectroscopy (XAS), Kelvin probe force microscopy (KPFM), surface photovoltage (SPV), hyperspectral imaging (HSI), and time-resolved fluorescence lifetime imaging microscopy (TR-FLIM) to discern the role of selective contacts. Specifically, we tune the selectivity of the contacts, changing the gradient in the carrier concentration across the surface of the active layer, which is connected to carrier extraction at the buried interface, and thus the device functionality.

25 ENERGY STORAGE↗

DOE OSTI2022

A deterministic gradient-based approach to avoid saddle points

Abstract Loss functions with a large number of saddle points are one of the major obstacles for training modern machine learning (ML) models efficiently. First-order methods such as gradient descent (GD) are usually the methods of choice for training ML models. However, these methods converge to saddle points for certain choices of initial guesses. In this paper, we propose a modification of the recently proposed Laplacian smoothing gradient descent (LSGD) [Osher et al., arXiv:1806.06317 ], called modified LSGD (mLSGD), and demonstrate its potential to avoid saddle points without sacrificing the convergence rate. Our analysis is based on the attraction region, formed by all starting points for which the considered numerical scheme converges to a saddle point. We investigate the attraction region’s dimension both analytically and numerically. For a canonical class of quadratic functions, we show that the dimension of the attraction region for mLSGD is $\lfloor (n-1)/2\rfloor$ , and hence it is significantly smaller than that of GD whose dimension is $n-1$ .

Mathematics↗

DOE OSTI2021

Investigating Thaw and Plant Productivity Constraints on Old Soil Carbon Respiration From Permafrost

Isotopic radiocarbon (Δ 14 C) signatures of ecosystem respiration (Reco) can identify old soil carbon (C) loss and serve as an early indicator of permafrost destabilization in a warming climate. Warming also stimulates plant productivity causing plant respiration to dominate Reco Δ 14 C signatures and potentially obscuring old soil C loss. Here, we investigate how a wide spatio-temporal gradient of permafrost thaw and plant productivity affects Reco Δ 14 C patterns and isotopic partitioning. Spatial gradients came from a warming experiment with doubling thaw depth and variable biomass, and a vegetation removal manipulation to eliminate plant contributions. We sampled in August and September to capture transitions from high to low plant productivity, decreased surface soil temperature, and relatively small seasonal thaw extensions. We found that surface processes dominate spatial variation in old soil C loss and a process-based partitioning approach was crucial for constraining old soil C loss. Resampling the same plots in different times of the year revealed that old soil C losses tripled with cooling surface temperature, and the largest old soil C losses were detected when the organic-to-mineral soil horizons thawed (~50–60 cm). We suggest that the measured increase in old soil respiration over the season and when the organic-to-mineral horizon thawed, may be explained by mobilization of nitrogen that stimulates microbial decomposition at depth. Our results suggest that soil C in the organic to mineral horizon may be an important source of soil C loss as the entire Arctic region warms and could lead to nonlinearities in projected permafrost climate feedbacks.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Al–W gradient density materials—Processing and dynamic ramp compression

Materials with high-density gradients are desired for controlling loading paths in dynamic compression, important for studying material properties in extreme conditions and inertial confinement fusion. The large density difference between Al and W makes them ideal choices for producing gradient density materials, but their extremely different melting temperatures make them challenging to fabricate simultaneously. We report a method for producing Al–W porosity-free materials with a fourfold increase in density (2.7–11 g/cm 3 ) across the composition range, from Al-rich to W-rich, without intermetallic phase formation. This was achieved by understanding the aluminum-dominated densification behavior and examining the influence of pressure and temperature on the densification of Al–W composites. Dynamic compression experiments conducted with the Al–W gradient density material produced shock ramp compressions as expected based on the designed composition, and the performed hydrodynamics simulations showed excellent agreement with experimental results. The results demonstrate that current activated pressure-assisted densification allows for the easy and rapid fabrication of gradient density materials with significant density gradients and tailored compositions, facilitating precise control of the loading paths. These materials have the potential to create customized pressure drives for advancing the fields of material science in extreme environments and dynamic compression.

Alloys↗