Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRESSURE DISTRIBUTION - AIRFOILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Hybrid Hydraulic-Electric Architecture (HHEA) for Mobile Machines (Final Report)

Traditionally, off-road mobile machines such as excavators and wheel loaders are primarily powered by hydraulics, and throttling valves are used to control their work circuits. In recent years, two general trends are towards more energy efficient systems and electrification. With electrification, both efficiency and control performance can be improved by the elimination of throttling losses and the use of high-bandwidth inverter control. Electrification is generally accomplished with Electro-hydraulic actuators (EHA) but they are limited to lower powered systems due to the high cost of electric machines capable of high power or high torque. This project proposes a new system architecture for off-road vehicles - Hybrid Hydraulic Electric Architecture (HHEA) to improve efficiency and control performance without requiring large electric machines. The widely applicable architecture combines hydraulic power and electric power in such a way that the majority of power is provided hydraulically while electric drives are used to modulate this power. In particular, HHEA utilizes multiple common pressure rails to transmit the majority of power and small electric machines to modulate the power. The energy-saving potential of the the HHEA has been validated for the work circuits of a variety of mobile machines, from small 5-ton excavators to medium sized 20-ton excavators and wheel loaders, and representative duty cycles to reduce energy input by 50-80% compared to the commercial state-of-art load-sensing systems. In addition, the corner power requirements of the electrical machines can be downsized by 85% compared to the EHA approach. Various tradeoff studies have also been conducted, including sensitivities to individual components performances, controllers, accumulator sizes, and variations of the system architecture etc. A control strategy has been developed to maintain or exceed the motion control precision compared to current systems. The motion control strategy consists of a nominal controller, based on a passivity-based backstepping design, and a transition controller, based on least-norn feedforward design. The nominal controller is used in between common pressure rail switches whereas the transition controller compensates for any disturbance that common pressure rail switchings inflict on the system. The control strategy has been experimentally validated on both a medium pressure (200bar) hardware-in-the-loop (HIL) testbed and a high pressure (300+bar) HIL testbed. An efficient and power-dense integrated electric-hydraulic machine consisting of an axial flux electric machine and a radial hydrostatic piston hydraulic machine has been designed, constructed and tested. The machine has an active material power density of 6.1kW/kg, a rated speed of 12500 RPM, and a design efficiency of 85%. This is among the highest power density electric machines using conventional materials. While the integrated machine was designed for modulating the hydraulic power within the HHEA, it can also be used in other applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Requirements Description of DASSH-F

This report reviews the modeling and simulation capabilities of Argonne National Laboratory’s DASSH code that is used in present reactor analysis activities. These capabilities will be used to establish the set of verification tasks necessary to verify DASSH for use on commercial projects. A similar approach was taken for the PERSENT, REBUS and DIF3D software packages. The DASSH program is a thermal analysis code designed to rapidly allow a reactor design engineer to obtain flow rates requirements that satisfy peak temperature constraints in the domain. DASSH is a follow-on development to the SE2-ANL software and SUPERENERGY-2 software that it is based upon. DASSH was designed to account for both neutron and gamma heating and is inherently connected to the GAMSOR part of the ARC suite of fast reactor analysis software. SE2-ANL is a developed piece of software from the 1980s while DASSH is a modern implementation with notable improvements in geometry handling. The most important upgrade of DASSH relative to SE2-ANL is that it can analyze multiple time points in a single run where SE2-ANL can only treat a single time point. This allows the user to understand the impact of and search the flow distribution for the entire operational period of a reactor design considering pressure drop, peak coolant and fuel temperatures, and thermal striping. DASSH has three input paths that have to be verified. The first input path builds the geometry and power distribution based upon the DIF3D model but ignores the gamma heating aspects of the problem. The second input path also builds the geometry from the DIF3D model but it takes the neutron and gamma heating distributions from GAMSOR. The third input path is to take the geometry and power distribution directly from user input (i.e. not coupled to DIF3D or GAMSOR). DASSH also has many built in correlations for material properties along with a user defined specification of the fuel, structure, and coolant properties. There are correlations for flow split, mixing, pressure drop, and heat transfer coefficients (subchannel rather than a direct methodology). In total, verification of DASSH will require an extensive testing to cover all possible user features of the software.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Status of the LCLS-II Cryogenic Distribution System

The LINAC Coherent Light Source II (LCLS-II) located at SLAC National Accelerator Laboratory (SLAC) in Menlo Park, CA, is a U.S. Department of Energy project tasked to design and build a world-class x-ray free-electron laser facility for scientific research. The Linac has superconducting radio frequency cryomodules that are connected to the cryogenic plant by the Cryogenic Distribution System (CDS), which consists of distribution boxes with heat exchangers and reliefs, feed caps, end caps, and surface, vertical, and bypass transfer lines. The CDS components were designed and built to specification by industry. The components have been delivered and their installation at SLAC will be discussed. The as-built relief system design will be presented, showing minimization of relief inlet pressure drops while meeting capacity requirements. The relieving flow pressure drops along the lengths of the CDS to centrally located reliefs at the distribution box were analysed to satisfy Pressure Vessel and Process Piping Code criteria to ensure relief performance. The sub-atmospheric 2 K circuit relieving approach will be discussed, which includes a three-way diverter isolation valve suitable for sub-atmospheric service. The component anchoring load design approach and installation into concrete floor will be discussed. This addresses loading, including seismic loading, along the component’s load path to floor anchoring system.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Probing initial baryon stopping and equation of state with rapidity-dependent directed flow of identified particles

In this work, using a (3 + 1)-dimensional hybrid framework with parametric initial conditions, we study the rapidity-dependent directed flow $v_1 (y)$ of identified particles, including pions, kaons, protons, and lambdas in heavy-ion collisions. Cases involving Au + Au collisions are considered, performed at $\sqrt {^SNN}$ ranging from 7.7 to 200 GeV. The dynamics in the beam direction is constrained using the measured pseudo-rapidity distribution of charged particles and the net proton rapidity distribution. Within this framework, the directed flow of mesons is driven by the sideward pressure gradient from the tilted source, and that of baryons mainly due to the initial asymmetric baryon distribution with respect to the beam axis driven by the transverse expansion. Our approach successfully reproduces the rapidity- and beam energy-dependence of $v_1$ for both mesons and baryons. We find that the $v_1 (y)$ of baryons has strong constraining power on the initial baryon stopping, and together with that of mesons, the directed flow probes the equation of state of the dense nuclear matter at finite chemical potentials.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Inertial and anisotropic pressure effects on cross-field electron transport in low-temperature magnetized plasmas

In this paper, a one-dimensional (1D) particle-in-cell Monte Carlo collision (PIC-MCC) model is developed to investigate the effects of anisotropic pressure and inertial terms due to non-Maxwellian velocity distribution functions on cross-field electron transport. The conservation of momentum is evaluated by taking the moments of the first-principles gas-kinetic equation. A steady-state discharge is obtained without any low-frequency ionization oscillations by considering an anomalous electron scattering profile. Further, the results obtained from the 1D PIC-MCC model are compared with fluid models, including the quasi-neutral drift-diffusion (DD), non-neutral DD, and full fluid moment models. The discharge current obtained from the PIC-MCC model is in good agreement with the fluid models. The cross-field electron transport due to the inertial terms, i.e. the gradient of axial and azimuthal drift, is evaluated. Moreover, PIC-MCC simulation results show non-zero, anisotropic, off-diagonal pressure tensor terms due to asymmetric non-Maxwellian electron velocity distribution function, potentially contributing to cross-field electron transport.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Evaluation of Weakly Informed Priors for FLEX Data

On behalf of the U. S. Nuclear Regulatory Commission (NRC), Idaho National Laboratory (INL) has reviewed the development and use of “weakly informed prior” (WIP) probability distributions to obtain industry-wide failure probability and rate distributions for portable “FLEX” equipment, as documented in the Pressurized Water Reactor Owner’s Group (PWROG) report, FLEX Equipment Data Collection and Analysis (PWROG 18043-P) by MM Degonish. The review includes a description of the methods used by the PWROG analysts. It also includes an implementation of those methods for comparison purposes and an implementation of two constrained-noninformative (CN) distributions for further WIP comparisons. The report documents several issues that the review identified in the development of the WIP distributions. They relate to the quality and representativeness of the current portable “FLEX” component data, the choice of informed distributions for related installed components, and the lack of verification for the factors chosen to weaken the information from the installed components. Two errors occurred in the computations: the posterior distribution of the WIP was used to modify the WIP itself, resulting in a lack of independence between the WIP and the data; and an error was made in the conversion of WIP mean and variance values to beta distributions. The INL reviewers think the WIP distributions presented in the report are untenable for use in risk assessments at the present time because of these issues.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Managing Subsurface Pressure Buildup and Interference in Commercial-Scale CO 2 Storage Project with Proximal Injection Wells

Large-scale decarbonization using carbon capture and storage (CCS) is likely to involve many commercial-scale CO 2 storage projects located in close proximity to each other. This close proximity raises concerns over pressure interference among the storage projects. Pressure interference between injection and storage efforts can reduce the practicable CO 2 storage resource and force wells to inject CO 2 at a lower rate to avoid the fracture pressure thresholds per United States Environmental Protection Agency (EPA) Class VI well regulations to preserve injection and confining zone integrity and potentially mitigate against inducing seismic activity. These analyses employ numerical full-physics reservoir modeling to evaluate how pressure buildup fronts and CO 2 plumes evolve under commercial-scale injection volumes of CO 2 in which multiple storage sites located in close proximity occur in tandem. The simulation models mimic injection at pseudo basin-scale and assume homogeneous saline formation(s) as storage targets with a pair of upper and lower homogeneous seal layer/s. These analyses specifically investigate the efficacy of two basin-wide reservoir pressure management strategies in addressing the technical challenges associated with pressure buildup and CO 2 plume commingling. The strategies explored include: 1) enlarging the area of injection well spacing (WS) and 2) storing CO 2 in a stacked sequence (SSS) of saline formations compared to a single formation. The storage and confining zones properties assumed were held common across the scenarios, unless specified otherwise. Analyses results show that after injecting 4 million tons per year for 30 years using 4 separate wells (each injecting 1 million metric tons per year), the radius of CO 2 plume extends to a mere 3 km or less from injection wells. Meanwhile, the radius of pressure buildup ranges on the order of tens to a few hundreds of kilometers, depending on the magnitude of pressure buildup threshold that one would use to define the front. CO 2 plume commingling from different injection wells appears to occur 50 years post-injection, especially under scenarios with narrowly spaced (i.e., < 5 km apart) injection well locations. Findings from sensitivity cases on the well spacing suggest that storage formations modeled would require different well spacing to avoid fracture pressure thresholds. For instance, modeled storage formations with high fracture gradients (i.e., 0.8 psi/ft) would need less than 5–km well spacing, whereas those with lower fracture gradients (i.e., 0.7 psi/ft) would need approximately 20–km well spacing, based on assumed modeling parameters. Under stacked injection, the pressure challenges (described above) still exist but are more alleviated due to distributing the same injection volume across more available reservoir volume. These analyses demonstrate that stacked-sequence storage can effectively address the challenges, while still providing the same target CO 2 storage volumes and allowing a large number of storage projects to be deployed in the same basin by better utilizing the available storage resource across different reservoir depths. Among cases modeled, the resulting pressure buildup front is most suppressed when each storage project distributes injection volumes over several wells, each of which injects a portion of the total CO 2 across the stacked sequence. This strategy results in the smallest CO 2 aerial footprint amongst scenarios evaluated but also shows the largest reduction in the pressure buildup at the top of perforation at the injection wells (upwards of approximately 42 percent compared to the commercial-scale single-formation storage), the result of which is crucial to maintain caprock integrity. The findings presented by this research draw attention to the importance of greater coordination among storage operators and regulatory stakeholders to foster the upscaling and deployment of CCS. These analyses provide insights into required decision-making when considering multi-project deployment in a shared basin. Because these analyses evaluate a very specific geologic situation, they bear further investigations across other geologic situations.

42 ENGINEERING↗
DOE OSTI2020

Micro- and nano-porosity of the active Alpine Fault zone, New Zealand

Porosity reduction in rocks from a fault core can cause elevated pore fluid pressures and consequently influence the recurrence time of earthquakes. We investigated the porosity distribution in the New Zealand's Alpine Fault core in samples recovered during the first phase of the Deep Fault Drilling Project (DFDP-1B) by using two-dimensional nanoscale and three-dimensional microscale imaging. Synchrotron X-ray microtomography-derived analyses of open pore spaces show total microscale porosities in the range of 0.1 %–0.24 %. These pores have mainly non-spherical, elongated, flat shapes and show subtle bipolar orientation. Scanning and transmission electron microscopy reveal the samples' microstructural organization, where nanoscale pores ornament grain boundaries of the gouge material, especially clay minerals. Our data imply that (i) the porosity of the fault core is very small and not connected; (ii) the distribution of clay minerals controls the shape and orientation of the associated pores; (iii) porosity was reduced due to pressure solution processes; and (iv) mineral precipitation in fluid-filled pores can affect the mechanical behavior of the Alpine Fault by decreasing the already critically low total porosity of the fault core, causing elevated pore fluid pressures and/or introducing weak mineral phases, and thus lowering the overall fault frictional strength. We conclude that the current state of very low porosity in the Alpine Fault core is likely to play a key role in the initiation of the next fault rupture.

58 GEOSCIENCES↗
DOE OSTI2020

Manufacturing control systems and logic for prognosis of defects in composite materials

Presented are manufacturing control systems for composite-material structures, methods for assembling/operating such systems, and transfer molding techniques for predicting and ameliorating void conditions in fiber-reinforced polymer panels. A method for forming a composite-material construction includes receiving a start signal indicating a fiber-based preform is inside a mold cavity, and transmitting a command signal to inject pressurized resin into the mold to induce resin flow within the mold cavity and impregnate the fiber-based preform. An electronic controller receives, from a distributed array of sensors attached to the mold, signals indicative of pressure and/or temperature at discrete locations on an interior face of the mold cavity. The controller determines a measurement deviation between a calibrated baseline value and the pressure and/or temperature values for each of the discrete locations. If any one of the respective measurement deviations exceeds a calibrated threshold, a void signal is generated to flag a detected void condition.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Kinetic Simulations of Radiative Magnetic Reconnection in the Coronae of Accreting Black Holes

We perform 2D and 3D particle-in-cell simulations of reconnection in magnetically dominated e ± plasmas subject to strong Compton cooling. Magnetic reconnection under such conditions can operate in accretion disk coronae around black holes, which produce hard X-rays through Comptonization. Our simulations show that most of the plasma in the reconnection layer is kept cold by Compton losses and locked in magnetically dominated plasmoids with a small thermal pressure. Compton drag clears cavities inside plasmoids and also affects their bulk motions. These effects, however, weakly change the reconnection rate and the plasmoid size distribution from those in nonradiative reconnection. This demonstrates that the reconnection dynamics is governed by similar magnetic stresses in both cases and weakly affected by thermal pressure. We examine the energy distribution of particles energized by radiative reconnection and observe two distinct components: (1) A mildly relativistic peak, which results from bulk motions of cooled plasmoids. This component receives most of the dissipated reconnection power and dominates the output X-ray emission. The peak has a quasi-Maxwellian shape with an effective temperature of ~100 keV. Thus, it mimics thermal Comptonization used previously to fit hard-state spectra of accreting black holes. (2) A high-energy tail, which receives ~20% of the dissipated reconnection power. It is populated by particles accelerated impulsively at X-points or "picked up" by fast outflows from X-points. The high-energy particles immediately cool, and their inverse Compton emission explains the MeV spectral tail detected in the hard state of Cyg X-1. Our first-principle simulations support magnetic reconnection as a mechanism powering hard X-ray emission from magnetically dominated regions of accreting black holes.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Deep level defects in low-pressure chemical vapor deposition grown (010) β-Ga 2 O 3

This study provides the full-bandgap evaluation of defect state distributions in beta phase gallium oxide (β-Ga 2 O 3 ) grown by low-pressure chemical vapor deposition (LPCVD) on (010) β-Ga 2 O 3 substrates at high growth of up to 20 µm/h. Deep-level optical spectroscopy and deep-level transient spectroscopy measurements applied to Ni/β-Ga 2 O 3 Schottky diodes revealed the presence of a previously unreported defect state at E C -3.6 eV, which dominated the overall trap distribution in LPCVD grown material. However, states at E C -0.8 eV, E C -2.0 eV, and E C -4.4. eV were also detected, similar to prior studies on β-Ga 2 O 3 grown by other methods, with similar or lower concentrations for the LPCVD samples. The E C -0.8 eV and E C -2.0 eV states were previously connected to residual Fe impurities and gallium vacancies, respectively. The total concentration of traps in the LPCVD material was on par with or lower than the state-of-the-art metal–organic chemical vapor deposition-grown materials despite the much higher growth rate, and the distribution of states showed negligible dependence on SiCl 4 flow rate and doping concentration. These results demonstrate that the high growth rate of LPCVD-grown β-Ga 2 O 3 is very promising for achieving thick, low defect density, and high-quality layers needed for multi-kV device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High-pressure phase transitions and melt structure of Pb O 2 : An analog for silica

In situ x-ray diffraction measurements and inverse Monte Carlo simulations of pair distribution functions were used to study the structural response of PbO 2 under pressure and to characterize the local structure of liquid PbO 2 . Two phase transitions are observed upon room-temperature compression of crystalline PbO 2 up to ~65 GPa. Here, the starting mixture of rutile structured β– PbO 2 and orthorhombic α– PbO 2 undergoes a transition to a ZrO 2 -type orthorhombic phase with space group Pbca at ~21 GPa. Above 42 GPa, the Pbca phase transforms to a cotunnite-type phase with space group Pnam. In this paper, we also report short-range order in liquid PbO 2 , showing ~8–9-fold and 4–5-fold coordination around Pb and O atoms, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

The Intermetallic Reactivity Database: Compiling Chemical Pressure and Electronic Metrics toward Materials Design and Discovery

Here, the advent of high-throughput Density Functional Theory (DFT) calculations has supported the creation of large databases containing the quantitative output necessary for constructing theoretical phase diagrams and predicting physical properties. In this Article, we present a complementary resource, the Intermetallic Reactivity Database (IRD), focused on the chemical bonding features of solid-state structures and indicators of potential structural transformations. Each IRD entry augments common features, such as band structures and density of states (DOS) distributions, with chemically motivated information including DFT-Chemical Pressure (CP) schemes and visualizable representations of the atomic charges. Together, these data types enable the rationalization and prediction of potential structural phenomena encountered in intermetallic chemistry, as we illustrate with four examples: the origins of the Y 2 Ni 2 Mg structure in terms of CP features of its parent structures, the anticipation of intergrowth phases from the net atomic CPs collected in Al-containing binary phases, the correlation between trends in the CP schemes of CaCu 5 -type phases and experimentally observed structural variations, and finally, the development of theoretical methodology with the testing of a streamlined method generating DFT-CP schemes. Altogether, these examples highlight how the IRD supports the creation of models of structural chemistry that extend beyond the bounds of its entries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Proton Acceleration in Low- β Magnetic Reconnection with Energetic Particle Feedback

Magnetic reconnection regions in space and astrophysics are known as active particle acceleration sites. There is ample evidence showing that energetic particles can take a substantial amount of converted energy during magnetic reconnection. However, there has been a lack of studies understanding the backreaction of energetic particles at magnetohydrodynamical scales in magnetic reconnection. To address this, we have developed a new computational method to explore the feedback by nonthermal energetic particles. This approach considers the backreaction from these energetic particles by incorporating their pressure into magnetohydrodynamics (MHD) equations. The pressure of the energetic particles is evaluated from their distribution evolved through Parker's transport equation, solved using stochastic differential equations (SDEs), so we coin the name MHD-SDE. Applying this method to low-β magnetic reconnection simulations, we find that reconnection is capable of accelerating a large fraction of energetic particles that contain a substantial amount of energy. When the feedback from these particles is included, their pressure suppresses the compression structures generated by magnetic reconnection, thereby mediating particle energization. Consequently, the feedback from energetic particles results in a steeper power-law energy spectrum. These findings suggest that feedback from nonthermal energetic particles plays a crucial role in magnetic reconnection and particle acceleration.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Sputter-deposited low-stress boron carbide films

Significant challenges have been faced in the manufacturing of low-stress B 4 C films. Here, we demonstrate a set of process parameters for direct-current magnetron sputter deposition of smooth, high-purity, amorphous B 4 C films with near-zero total residual stress and with thicknesses up to 10 μm. Films are characterized by a combination of high-energy ion scattering, x-ray diffraction, electron microscopy, and stress measurements based on substrate curvature. In order to facilitate the process transfer to other sputtering geometries, the favorable deposition conditions are correlated with distributions of landing energies and incident angles of depositing species estimated by Monte Carlo simulations of ballistic collisions and gas phase atomic transport. Based on such simulations, a decrease in compressive stress with increasing Ar working gas pressure is attributed to the corresponding broadening of the angular distribution of depositing species and associated atomic shadowing effects.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Understanding the phase transformation mechanisms that affect the dynamic response of Fe-based microstructures at the atomic scales

Large-scale molecular dynamics (MD) simulations were carried out to investigate the shock-induced evolution of microstructure in Fe-based systems comprising single-crystal and layered Cu/Fe alloys with a distribution of interfaces. The shock compression of pure single-crystal Fe oriented along [110] above a threshold pressure results in a BCC (α)→HCP (ε) phase transformation behavior that generates a distribution of ε phase variants in the phase transformed region of the microstructure behind the shock front. The propagation of the release wave through a phase transformed ε phase causes a reverse ε→α phase transformation and renders a distribution of twins for the [110] oriented Fe that serve as void nucleation sites during spall failure. The simulations reveal that the α→ε→α transformation-induced twinning for shock loading along the [110] direction is due to a dominant ε phase variant formed during compression that rotates on the arrival of the release wave followed by a reverse phase transformation to twins in the α phase. The modifications in the evolution of the ε phase variants and twins in Fe behavior are also studied for Cu–Fe layered microstructures due to the shock wave interactions with the Cu/Fe interfaces using a newly constructed Cu–Fe alloy potential. Here, the MD simulations suggest that interfaces affect the observed variants during shock compression and, hence, distributions of twins during shock release that affects the void nucleation stresses in the Fe phase of Cu/Fe microstructures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In‐mold rheology and automated process control for injection molding of recycled polypropylene

Abstract Manufacturing plastic parts with secondary feedstocks has risen to the forefront of importance in recent years. However, the variation in molecular weight and rheology of secondary feedstock can lead to inconsistent part quality. This work evaluates the effectiveness of a novel closed‐loop adaptive process control system that adjusts nozzle pressure in response to in‐mold pressure data. Five different recycled polypropylene blends, with a broad distribution of flow properties, were evaluated to determine the effectiveness of the control system at reducing processing variation. The experimental results show that the process control strategy reduced the variation within the mold, as seen by in‐mold pressure curves and calculated in‐mold viscosity values. Additionally, the parameters that control the automated process adjustments were investigated, showing the importance of optimization. The analysis of the correlation between in‐mold rheology and mechanical properties showed a slight variation in the mechanical properties and parts weight with a coefficient of variation of under 5%. Overall, the results demonstrate the ability of pressure‐controlled molding and automated viscosity adjustment to reduce the variability when molding a secondary feedstock. Highlights Pressure‐controlled injection molding of recycled polypropylene. Automated closed‐loop adaptive process control methodology. Methodology resulted in a reduction in pressure variation during molding. Changes in mechanical properties and in‐mold viscosity were investigated. Results show the potential of pressure‐controlled molding at reducing variation.

Krantz, Joshua↗
DOE OSTI2022

Dehydration of gas-phase benzyl amine alcohols studied at atmospheric pressure

Gas-phase ion chemistry is a useful approach for the investigation of physical organic chemistry and the study of reactivity, structure, and thermochemical properties of ionic and neutral organic substrates. Herein, one-step dehydration of gas-phase benzyl amine alcohols to give benzazetidines was discovered without the use of catalysts. Mechanistic investigations of the gas-phase dehydration reactions were explored to study the possible influence of charged microdroplet acceleration during electrospray ionization (ESI) and collisions occurring during ion transfer through the atmospheric pressure interface (API) of the mass spectrometer. The product ion distribution was observed to be less sensitive to droplet effects (spray distance and voltage), and temperature of transfer capillary in the API. However, the product ion distribution exhibit high sensitivity to different S-lens radio frequency (RF) voltage of the API, providing evidence that the dehydration reaction is driven by collisions during ion transfer in the API. With this insight, we developed atmospheric pressure thermal dissociation platform that allowed thermal-induced collisions outside of the mass spectrometer when the benzyl amine alcohols are carried through a heated coiled tube. Up to 98% dissociation efficiency was achieved with the coiled tube heated to a temperature of 200 °C, yielding only the desired benzazetidine product. Finally, by performing the atmospheric pressure thermal dissociation experiment outside of the mass spectrometer, we believe it will be straightforward to collect the dehydration product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗