SEARCH · Search NASA

Results for “PROPAGATION MODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Bow shock and magnetosheath waves at Mercury

Mariner 10 measurements at the Mercury bow shock provide examples where the magnetic field is approximately parallel or perpendicular to the bow shock normal. Upstream of a broad irregular parallel shock, left hand circularly polarized waves are observed which cut off very sharply at approximately 4 Hz. Upstream of a perpendicular shock, right hand circularly polarized waves are observed which persist up to the Nyquist frequency of 12 Ha. Determination of the wave propagation vector as a function of frequency helps conclusively identify the waves as whistler mode waves propagating from the shock. The magnetosheath downstream of the parallel shock is disturbed more than that downstream of the perpendicular shock particularly below 1 Hz. In the latter case regular left hand polarized waves observed slightly above the proton gyrofrequency are identified as ion cyclotron waves with wavelength approximately 300 km which are Doppler shifted up to their observed frequency.

Fairfield, D. H.↗

NASA NTRS1992

Theory of small-scale density and electric field fluctuations in the nightside Venus ionosphere

Recently, it has been reported that small-scale (lambda about 0.1-2 km) density irregularities occur during 100-Hz electric field bursts in the nightside ionosphere of Venus. This paper provides a detailed analysis of the lower-hybrid-drift instability as a mechanism to generate the observed irregularities. A fully electromagnetic theory is developed that is relevant to the finite beta plasma in Venus's ionosphere and includes collisional effects (e.g., electron-ion, electron-neutral, and ion-neutral collisions). The key features of the analysis that favor this instability are the following: (1) it is a flute mode and propagates orthogonal to the ambient magnetic field; (2) it is a relatively short wavelength mode and the Doppler-shifted frequency can be greater than about 100 Hz; (3) it can produce both electric field and density fluctuations, as well as magnetic field fluctuations in a finite beta plasma; and (4) it is most unstable in low-beta plasmas so that it is likely to occur in the low-density, high-magnetic-field ionospheric holes. These features are consistent with observational results.

Huba, J. D.↗

NASA NTRS2012

Compression After Impact on Honeycomb Core Sandwich Panels With Thin Facesheets: Experiments - Part 1

A two part research study has been completed on the topic of compression after impact (CAI) of thin facesheet honeycomb core sandwich panels. The research has focused on both experiments and analysis in an effort to establish and validate a new understanding of the damage tolerance of these materials. Part one, the subject of the current paper, is focused on the experimental testing. Of interest are sandwich panels, with aerospace applications, which consist of very thin, woven S2-fiberglass (with MTM45-1 epoxy) facesheets adhered to a Nomex honeycomb core. Two sets of specimens, which were identical with the exception of the density of the honeycomb core, were tested. Static indentation and low velocity impact using a drop tower are used to study damage formation in these materials. A series of highly instrumented CAI tests was then completed. New techniques used to observe CAI response and failure include high speed video photography, as well as digital image correlation (DIC) for full-field deformation measurement. Two CAI failure modes, indentation propagation, and crack propagation, were observed. From the results, it can be concluded that the CAI failure mode of these panels depends solely on the honeycomb core density.

McQuigg, Thomas D.↗

NASA NTRS1990

Intense ionospheric electric and magnetic field pulses generated by lightning

Electric and magnetic field measurements have been made in the ionosphere over an active thunderstorm and an optical detector onboard the same rocket yielded an excellent time base for the study of waves radiated into space from the discharge. In addition to detection of intense, but generally well understood whistler mode waves, very unusual electric and magnetic field pulses preceded the 1-10 kHz component of the radiated signal. These pulses lasted several ms and had a significant electric field component parallel to the magnetic field. No known propagating wave mode has this polarization nor a signal propagation velocity as high as those measured here. This study investigated and rejected an explanation based on an anomalous skin depth effect. Although only a hypothesis at this time, a more promising explanation involving the generation of the pulse via a nonlinear decay of whistler mode waves in the frequency range 10-80 kHz is being investigated.

Kelley, M. C.↗

NASA NTRS1976

Bow shock and magnetosheath waves at Mercury

Mariner 10 measurements at the Mercury bow shock provide examples where the magnetic field is approximately parallel or perpendicular to the bow shock normal. Upstream of a broad irregular parallel shock, left-hand circularly polarized waves are observed which cut off very sharply at about 4 Hz. Upstream of a perpendicular shock, righ-hand circularly polarized waves are observed which persist up to the Nyquist frequency of 12 Hz. Determination of the wave propagation vector as a function of frequency helps to identify conclusively the waves as whistler mode waves propagating from the shock. The magnetosheath downstream of the parallel shock is disturbed more than that downstream of the perpendicular shock, particularly below 1 Hz. In the latter case, regular left-hand-polarized waves observed slightly above the proton gyrofrequency are identified as ion cyclotron waves with wavelengths of about 300 km which have been Doppler shifted up to their observed frequency.

Fairfield, D. H.↗

NASA NTRS1986

Simulations of electron beam excited modes in the high-altitude magnetosphere

Excitation of waves by electron distributions consisting of hot, beam, and cold populations is investigated theoretically and with the help of particle simulations. The main modes excited include the upper hybrid oscillation for nearly perpendicular propagation; the whistler mode at oblique angles, which becomes the plasma two-stream oscillation for parallel propagation; and the electron acoustic mode for nearly parallel propagation. The whistler mode, excited by thermal fluctuation enhancement, has a broad range of wave numbers and quasi-linearly decreases the beam slope, while the electron acoustic mode, which is linearly unstable, has a narrow spread in phase velocities and traps the beam and the warm electrons forming a double humped distribution. Both modes contribute to forming a tail in the cold electron distribution. The resulting wave spectrum is discussed in the context of DE 1 observations.

Roth, I.↗

NASA NTRS1976

Some comments on the whistler mode instability at Jupiter

The paper considers the possibility that electrons with energies exceeding 21 MeV at Jupiter interact resonantly with obliquely propagating whistler mode waves. The equatorial pitch angle distributions are deduced from the Pioneer 10 and 11 data points of Van Allen et al. (1975). For the L shell subgroup 7, there is observed a 'hat-shaped' pitch angle distribution which is similar to that found within the earth plasmasphere.

Scarf, F. L.↗

NASA NTRS1993

The cutoff frequency for fast-mode magnetohydrodynamic waves in an isothermal atmosphere with a uniform horizontal magnetic field

This study analytically examines conditions for reflection of MHD fast-mode waves propagating upward in an isothermal atmosphere. A new method of transforming the linearized wave equation into Klein-Gordon form is utilized to calculate a local cutoff (critical) frequency for these waves. This critical frequency determines the height in the atmosphere at which reflection dominates and above which wave propagation is effectively cut off. Comparison of our results to those previously obtained shows that earlier calculations of the critical frequency for MHD fast mode waves were done incorrectly. The results may be helpful in explaining the short-period end of the spectrum of the solar global p-mode oscillations. They may also be important in studies of wave propagation and wave trapping in highly magnetized stellar atmospheres.

Stark, B. A.↗

NASA NTRS1984

Effects of processing and microstructure on the fatigue behaviour of the nickel-base superalloy Rene95

Forms of the nickel-base superalloy Rene95 produced by three processing methods were evaluated in tensile, low cycle fatigue and fatigue crack propagation tests at 540 and 650 C. Two powder-metallurgy (PM) forms, hot-isostatically-pressed and extruded-and-forged, and a conventionally cast-and-wrought form were all given the same heat treatment. The extruded-and-forged form showed superior fatigue life in low strain range tests though the two PM forms exhibited nearly identical mechanical behavior in all other respects. Further, this life difference could not be explained by significant differences in the types, sizes or shapes of the defects initiating failure. The cast-and-wrought Rene95, however, had lower strength, ductility and fatigue life, but higher fatigue crack propagation resistance because of a larger grain size. It did not exhibit the environmentally-assisted intergranular mode of propagation which occurs in PM Rene95 and other fine-grained superalloys at these test temperatures and frequencies.

Miner, R. V.↗

NASA NTRS2001

Wave Normal and Poynting Vector Calculations using the Cassini Radio and Plasma Wave Instrument

Wave normal and Poynting vector measurements from the Cassini radio and plasma wave instrument (RPWS) are used to examine the propagation characteristics of various plasma waves during the Earth flyby on August 18, 1999. Using the five-channel waveform receiver (WFR), the wave normal vector is determined using the Means method for a lightning-induced whistler, equatorial chorus, and a series of low-frequency emissions observed while Cassini was in the magnetosheath. The Poynting vector for these emissions is also calculated from the five components measured by the WFR. The propagation characteristics of the lightning-induced whistler were found to be consistent with the whistler wave mode of propagation, with propagation antiparallel to the magnetic field (southward) at Cassini. The sferic associated with this whistler was observed by both Cassini and the Stanford VLF group at the Palmer Station in Antarctica. Analysis of the arrival direction of the sferic at the Palmer Station suggests that the lightning stroke is in the same sector as Cassini. Chorus was observed very close (within a few degrees) to the magnetic equator during the flyby. The chorus was found to propagate primarily away from the magnetic equator and was observed to change direction as Cassini crossed the magnetic equator. This suggests that the source region of the chorus is very near the magnetic equator. The low-frequency emission in the magnetosheath has many of the characteristics of lion roars. The average value of the angle between the wave normal vector and the local magnetic field was found to be 16 degrees, and the emissions ranged in frequency from 0. 19 to 0.75 f(sub ce), where f(sub ce) is the electron cyclotron frequency. The wave normal vectors of these waves were primarily in one direction for each individual burst (either parallel or antiparallel to the local field) but varied in direction throughout the magnetosheath. This suggests that the sources of the emissions are far from the spacecraft and that there are multiple source regions.

Hospodarsky, G. B.↗

NASA NTRS1987

Unusual characteristics of electromagnetic waves excited by cometary newborn ions with large perpendicular energies

The characteristics of electromagnetic waves excited by cometary newborn ions with large perpendicular energies are examined using a model of solar wind permeated by dilute drifting ring distributions of electrons and oxygen ions with finite thermal spreads. The model has parameters compatible with the ICE observations at the Giacobini-Zinner comet. It is shown that cometary newborn ions with large perpendicular energies can excite a wave mode with rest frame frequencies in the order of the heavy ion cyclotron frequency, Omega(i), and unusual propagation characteristics at small obliquity angles. For parallel propagation, the mode is left-hand circularly polarized, might be unstable in a frequency range containing Omega(i), and moves in the direction of the newborn ion drift along the static magnetic field.

Brinca, A. L.↗

NASA NTRS1974

Sound fields in a lined annular flow duct with lined radial splitters

High attenuation in the inlet duct of fan-jet engines is limited mainly because of two factors: the duct length is short and the frequency is high giving rise to a large duct width to wavelength ratio. Lined radial splitters may be installed. In this configuration not only is the absorbing surface area increased, the acoustic propagation properties in each of the segmented ducts are different to those in a cylindrical or annular duct without radial splitters. Such differences in properties can be used to advantage for mismatching the acoustic source. A lower order spinning mode must propagate as a higher order (integral or fractional) spinning mode. Cut-off phenomena may also be used to advantage. A theoretical modal analysis is made of the sound inside one segment of the annular duct with lined radial splitters.

Mungur, P.↗

NASA NTRS1998

Dryout and Rewetting in the Pool Boiling Experiment Flown on STS-72 (PBE-2 B) and STS-77 (PBE-2 A)

Experiments were conducted in the microgravity of space in which a pool of liquid (R-113), initially at a precisely defined pressure and temperature, is subjected to a step imposed heat flux from a semi-transparent thin-film heater forming part of one wall of the container such that boiling is initiated and maintained for a defined period of time at a constant pressure level. A total of nine tests were conducted at three levels of heat flux and three levels of subcooling in each of the two space experiments in a GAS canister on the STS-77, -72, respectively. Three (3) modes of propagation of boiling across the heater surface and subsequent vapor bubble growths were observed, in addition to the two (2) modes observed in the previous microgravity pool boiling space flights on STS-47, -57, and -60. Of particular interest were the extremely dynamic or "explosive" growths, which were determined to be the consequence of the large increase in the liquid-vapor interface area associated with the appearance of a corrugated or rough interface. Predictions of circumstances for its onset have been carried out. Assumptions were necessary regarding the character of disturbances necessary for the instabilities to grow. Also, a new vapor bubble phenomena was observed in which small vapor bubbles migrated toward a larger bubble, eventually coalescing with this larger bubble. The heat transfer was enhanced approximately 30% as a result of these migrating bubbles, which is believed to be a vapor bubble manifestation of Marangoni convection and/or molecular momentum effects, sometimes referred to as vapor recoil. The circumstances of heat flux and liquid subcooling necessary to produce heater surface dryout for an initially stagnant liquid subjected to an imposed heat flux have been more closely identified.

Merte, Herman, Jr.↗

NASA NTRS2004

A Resonator for Low-Threshold Frequency Conversion

A proposed toroidal or disklike dielectric optical resonator (dielectric optical cavity) would be made of an optically nonlinear material and would be optimized for use in parametric frequency conversion by imposition of a spatially periodic permanent electric polarization. The poling (see figure) would suppress dispersions caused by both the material and the geometry of the optical cavity, thereby effecting quasi-matching of the phases of high-resonance-quality (high-Q) whispering-gallery electromagnetic modes. The quasi-phase-matching of the modes would serve to maximize the interactions among them. Such a resonator might be a prototype of a family of compact, efficient nonlinear devices for operation over a broad range of optical wavelengths. A little background information is prerequisite to a meaningful description of this proposal: (1) Described in several prior NASA Tech Briefs articles, the whispering-gallery modes in a component of spheroidal, disklike, or toroidal shape are waveguide modes that propagate circumferentially and are concentrated in a narrow toroidal region centered on the equatorial plane and located near the outermost edge. (2) For the sake of completeness, it must be stated that even though optical resonators of the type considered here are solid dielectric objects and light is confined within them by total internal reflection at dielectric interfaces without need for mirrors, such components are sometimes traditionally called cavities because their effects upon the light propagating within them are similar to those of true cavities bounded by mirrors. (3) For a given set of electromagnetic modes interacting with each other in an optically nonlinear material (e.g., modes associated with the frequencies involved in a frequency-conversion scheme), the threshold power for oscillation depends on the mode volumes and the mode-overlap integral. (4) Whispering-gallery modes are attractive in nonlinear optics because they maximize the effects of nonlinearities by occupying small volumes and affording high Q values

Iltchenko, Vladimir↗

NASA NTRS1988

Analysis of crack propagation in roller bearings using the boundary integral equation method - A mixed-mode loading problem

Crack propagation in a rotating inner raceway of a high-speed roller bearing is analyzed using the boundary integral method. The model consists of an edge plate under plane strain condition upon which varying Hertzian stress fields are superimposed. A multidomain boundary integral equation using quadratic elements was written to determine the stress intensity factors KI and KII at the crack tip for various roller positions. The multidomain formulation allows the two faces of the crack to be modeled in two different subregions, making it possible to analyze crack closure when the roller is positioned on or close to the crack line. KI and KII stress intensity factors along any direction were computed. These calculations permit determination of crack growth direction along which the average KI times the alternating KI is maximum.

Ghosn, L. J.↗

NASA NTRS1973

Tensile fracture of unidirectional B-Al composite.

Fracture studies on unidirectional boron filament/aluminum matrix composite under axial tension were conducted using scanning electron microscopy, microradiography, and an acoustic emission technique. The combination of these analysis techniques has allowed the description and microstructural characterization of a new noncumulative fracture mode which involves filament break propagation. This fracture mode was found to severely limit the tensile strength of the composite, since the initiation of break propagation leads immediately to catastrophic failure at filament stress levels above a critical value. This critical filament stress was found to be 170,000 psi, and it appeared to be independent of filament diameter, number of filament layers, and the type of matrix alloy.

Steele, J. H.↗

NASA NTRS1972

Wave propagation in the magnetosphere of Jupiter

A systematic procedure is developed for identifying the spatial regimes of various modes of wave propagation in the Jupiter magnetosphere that may be encountered by flyby missions. The Clemmow-Mullaly-Allis (CMA) diagram of plasma physics is utilized to identify the frequency regimes in which different modes of propagation occur in the magnetoplasma. The Gledhill model and the Ioannidis and Brice model of the magnetoplasma are summarized, and configuration-space CMA diagrams are constructed for each model for frequencies from 10 Hz to 1 MHz. The distinctive propagation features, the radio noise regimes, and the wave-particle interactions are discussed. It is concluded that the concentration of plasma in the equatorial plane makes this region of vital importance for radio observations with flyby missions. Local radio noise around the electron cyclotron frequency will probably differ appreciably from its terrestrial counterpart due to the lack of field-line guidance. Hydromagnetic wave properties at frequencies near the ion cyclotron frequency and below will probably be similar to the terrestrial case.

Liemohn, H. B.↗

NASA NTRS1989

Dynamics of planetary-scale baroclinic waves during Southern Hemisphere winter

The characteristics of linear and finite amplitude baroclinic waves during Southern Hemisphere winter were investigated using a three-dimensional global primitive-equation spectral mode, with emphasis on the dynamics of planetary scale modes which propagate into the stratosphere. Linear stability computations showed that the winter zonally averaged basic state is baroclinically unstable, with the most unstable modes being Charney-type modes; however, the results showed that Green-type modes also exist; these give much larger relative amplitude in the stratosphere although they have smaller growth rates. The results suggest that the existence of both Charney and Green modes might explain certain observed properties of the eastward traveling waves, such as the lack of coherence between troposphere and stratosphere at zonal wavenumbers 1 and 2.

Young, Richard E.↗