Search NASA⌕ Search

SEARCH · Search NASA

Results for “PULSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Regular radiation field pulses produced by intracloud lightning discharges

Sequences or bursts of uniform pulses have been recorded during a large fraction of intracloud lightning discharges in Florida and Arizona. The wave form of a typical pulse begins with a fast large-amplitude portion followed by a small and slowly varying overshoot. The full width and half maximum of the large amplitude peak is typically 0.75 microsec, and the time intervals between pulses are typically 5 microsec in both maritime and continental storms. The pulse shapes and interval times suggest that the source of these pulses in an intracloud dart-stepped leader process similar to that which has been photographed in discharges to ground.

Krider, E. P.↗
NASA NTRS1977

Mathematical models for the reflection coefficients of lossy dielectric half-spaces with application to transient responses of chirped pulses

Reflection coefficients are found at normal incidence for a large class of homogeneous lossy half-spaces with a one-dimensionally inhomogeneous or stratified lossy layer on top. Solutions are in terms of Hankel functions of complex argument to decrease cancellation error at high frequencies. One special case is that of layers on a homogeneous half-space where the dielectric constant in each layer may vary in a quite general manner. A Wronskian is used to insure the critical computations are correct. The reflection of chirped pulses is considered. Solutions are obtained by applying the fast Fourier transform. It is found that for a typical relatively long normalized 'long' pulse the power reflected as a function of time is essentially the power reflection coefficient for the frequencies swept out, whereas for a relatively short 'long' pulse, with the same relative change in frequency and the same number of oscillations there is only the uniform attenuation by the power reflection coefficient of the center frequency. By a 'long' pulse we mean a pulse whose spatial length is long compared to the thickness of the reflecting layer.

Evans, D. D.↗
NASA NTRS1979

The high-energy pulsed X-ray spectrum of Hercules X-1 as observed with OSO 8

Hercules X-1 was observed from August 30 to September 10, 1977, by using the high-energy X-ray scintillation spectrometer on board the OSO 8 satellite. The observation, during which the source was monitored continually for nearly an entire ON-state, covered the energy range from 16 to 280 keV. Pulsed-flux measurements as a function of binary orbit and binary phase are presented for energies between 16 and 98 keV. The pulsed flux between 16 and 33 keV exhibited a sharp decrease following the fourth binary orbit and was consistent with zero pulsed flux thereafter. Only weak evidence was found for temporal variation in the pulsed flux between 33 and 98 keV. The pulsed spectrum has been fitted with a power law, a thermal spectrum without features, and a thermal spectrum with a superposed Gaussian centered at 55 keV. The latter fit has the smallest value of chi-square per degree of freedom, and the resulting integrated line intensity is approximately 0.0015 photon/sec per sq cm for a width of 3.1 (+9.1, -2.6) keV. This result, while of low statistical significance, agrees with the value observed by Truemper (1978) during the same ON-state.

Maurer, G. S.↗
NASA NTRS1979

Pulsed radio frequency interference effects on data communications via satellite transponder

Power-limited communication links may be susceptible to significant degradation if intentional or unintentional pulsed high level radio frequency interference (RFI) is present. Pulsed RFI is, in fact, of current interest to NASA in studies relating to its Tracking and Data Relay Satellite System (TDRSS). The present paper examines the impact of pulsed RFI on the error probability performance of a power-limited satellite communication link: the assumed modulation scheme is PN coded binary PSK. The composite effects of thermal noise, pulsed CW and pulsed Gaussian noise are analyzed, where RFI arrivals are assumed to follow Poisson statistics. Under the assumption that the satellite repeater is ideal and that integrate and dump filtering is employed at the ground receiver, an exact error probability expression and associated approximations are derived. Computed results are generated using an arbitrarily specified RFI model.

Weinberg, A.↗
NASA NTRS1982

Pulsed multiwavelength laser ranging system

A pulsed multiwavelength laser ranging system for measuring atmospheric delay was built and tested, and its theoretical performance limits were calculated. The system uses a dye modelocked ND:YAG laser, which transmits 70 psec wide pulses simultaneously at 1064, 532, and 355 nm. The differential delay of the 1064 and 355 nm pulses is measured by a specially calibrated waveform digitizer to estimate the dry atmospheric delay. The delay time of the 532 nm pulse is used to measure the target distance. Static crossed field photomultipliers are used as detectors for all wavelengths. Theoretical analysis shows that path curvature and atmospheric turbulence are fundamental limits to the ranging accuracy of both single and multicolor systems operating over horizontal paths. For two color systems, an additional error is caused by the uncertainty in the path averaged water vapor. The standard deviation of the multicolor instrument's timing measurements is directly proportional to the laser pulse width plus photomultiplier jitter divided by the square root of the received photoelectron number. The prototype system's maximum range is km, which is limited by atmospheric and system transmission losses at 355 nm. System signal detection and false alarm calculations are also presented.

Abshire, J. B.↗
NASA NTRS1982

Coherently pulsed laser source

An electronically controllable apparatus is described which modulates a continuous wave laser beam so as to produce an output beam consisting of coherent pulses that are electronically controllable as to both pulse repetition rate and pulse width. The apparatus includes two acoustic devices positioned so that the laser beam passes through them in sequence, and apparatus for passing sound waves through the devices to frequency shift the laser radiation as well as to diffract it. Each acoustic device generates sound waves containing a group of frequencies which result in spaced pulses. The first acoustic device is countered by the second acoustic device to produce a collimated, coherently pulsed, laser beam.

Margolis, J. S.↗
NASA NTRS1981

An analysis of short pulse and dual frequency radar techniques for measuring ocean wave spectra from satellites

A four frequency moment characterization of backscatter from the near-vertical is applied to an analysis of the short pulse and dual frequency microwave techniques. The range reflectivity modulation spectrum closely approximates the directional wave slope spectrum, while harmonic distortion is small and is a minimum near 10 deg incidence. The short pulse measurement signal-to-noise ratio (SNR) is typically greater than the narrowband dual frequency SNR, with the difference being the ratio of the range beam extent to pulse length, minus the ratio of beam-limited to pulse-limited Doppler spreads. It is concluded that dual frequency measurements are basically impractical, although short pulse measurements are useful and can employ existing space-qualified microwave hardware.

Jackson, F. C.↗
NASA NTRS1982

Recent progress in picosecond pulse generation from semiconductor lasers

This paper reviews the recent progress in producing picosecond optical pulses from semiconductor laser diodes. The discussion concentrates on the mode-locking of a semiconductor laser diode in an external resonator. Transform-limited optical pulses ranging from several picoseconds to subpicosecond durations have been observed with active and passive mode-locking. Even though continuing research on the influence of impurities and defects on the mode-locking process is still needed, this technique has good promise for being utilized in fiber-optic communication systems. Alternative methods of direct electrical and optical excitation to produce ultrashort laser pulses are also described. They can generate pulses of similar widths to those obtained by mode-locking. The pulses generated will find applications in laser ranging and detector response measurement.

Auyeung, J. C.↗
NASA NTRS1983

Investigation of a pulsed electrothermal thruster

Exhaust velocity and thrust measurements are performed on a pulsed electrothermal thruster using polyethylene and Teflon propellants. The results verify theoretical predictions of equilibrium flow in the nozzle, resulting in substantial recovery of the energy of dissociation and ionization. The thruster is tested in an unsteady mode (15 micro sec current pulse and 15 cm discharge length) and in a quasi-steady mode (48 micro sec current pulse and 5 cm discharge length). All tests are run at 2 kJ. The exhaust velocity of the propellant mass exiting during the current pulse is measured with two types of time of flight probes, and the impulse bit is measured on a thrust stand. It is inferred from both theory and experiment that an additional amount of mass is exhausted after the pulse. The measured thrust to power ratio for polyethylene is T/P = 0.10 NkW at 21 km/sec in the unsteady mode, and T/P = .053 N/kW at 27 km/sec in the quasi-steady mode, where the velocities are measured by the time-of-flight probes. For Teflon propellant, T/P = .20 N/kW at 15 km/sec (unsteady mode) and 0.090 N/kW at 20 km/sec (quasi-steady mode). The discharge pressure and temperature predicted by a computational model for polyethylene are consistent with the measured thrust and discharge resistance.

Burton, R. L.↗
NASA NTRS1985

Pulse-Width-to-Analog-Voltage Converter

Peak output voltage varies linearly with input-pulse duration. Circuit converts pulses of varying widths (as from sound-velocity instrumentation or tachometers) into analog voltages. Peak voltage increases in proportion to pulse width. Voltage used to drive an x-y plotter or storage oscilloscope. Pulse-width-to-voltage converter has peak output voltage that varies with duration of input pulses.

Sosack, G. S.↗
NASA NTRS1986

Generating Independent Preionizing Pulses for Lasers

Simple pulse-coupling winding on saturable reactor core lets core act as pulse transformer, passing preionizing pulse from winding to tapered transmission line, then to laser. Laser prepared for independent firing pulse, which follows preionizing pulse. Winding is simple, light in weight, low in bulk and power consumption, and inexpensive.

Pacala, T. J.↗
NASA NTRS1985

Voyager 0.2-lbf thruster valve assembly short pulse test report

The short pulse width testing completed on the Voyager 0.2-lbf thruster value assemblies (T/VA's) and the disassembly and inspection of T/VA S/N 020 is reported. The purpose for performing the short pulse width testing on Voyager 0.2-lbf thruster valve assemblies (T/VA's) was to determine: (1) impulse bit versus electrical pulse width; (2) impulse bit variations versus electrical pulse width; and (3) whether the short pulses decrease thruster life.

Johnson, D. R.↗
NASA NTRS1985

Alfvenic pulses in the solar atmosphere

Some nonlinear aspects of Alfvenic pulses propagating in coronal loops and the underlying chromosphere are numerically investigated. Heat conduction and radiation are included. The Alfvenic pulses are modeled as axisymmetric twists on a vertical cylindrical flux tube. They nonlinearly couple into acoustic-gravity waves propagating along the flux tube. A single Alfvenic pulse is found to leave two acoustic-gravity pulses in its wake. These pulses can result in significant motions of the transition region and underlying chromosphere. These motions do not resemble spicules, but they may correspond to a variety of observations indicating that the solar atmosphere is in a continual dynamic state. It is suggested that a dynamic chromosphere and transition region may be the inevitable consequence of the coronal heating process itself.

Mariska, J. T.↗
NASA NTRS1986

Dead-time effects in pulse-counting Digicon detectors

The Hubble Space Telescope's High Resolution Spectrograph employs two pulse-counting Digicon detectors to record UV spectra. At higher measured count rates, the intervals between photon arrivals become comparable to the response time of the electronics, so that not every pulse will be counted; this 'paired pulse' effect causes departures from linearity and must be corrected for during raw data reduction. Attention is given to two analytic equations that quantify the dead-time losses. The less attenuated spectra are noted to be severely distorted by these losses; a comparison with the undistorted low count rate data allows a detailed analysis to be made of the pulse-counting characteristics over five decades of input event rates. The present equations and calibration methods should be applicable to all kinds of multichannel pulse-counting detectors.

Ebbets, Dennis C.↗
NASA NTRS1989

Pulse compression and sea level tracking in satellite altimetry

An account is given of the pulse-compression technique, in which a radar altimeter transmits a relatively long pulse and processes the returned signal in a way equivalent to transmitting a very short one and measuring the returned power in a sequence of range gates. The effective short pulse enhances the range resolution that would be obtained from the actual long pulse. Pulse compression and sea-level tracking are important to the overall error budget for altimetric estimates of sea level. Attention is presently given to the high degree of accuracy required for the NASA TOPEX altimeter scheduled for launch in mid-1992.

Chelton, Dudley B.↗
NASA NTRS1991

High current pulse testing for ground rod integrity

A test technique was developed to assess various grounding system concepts used for mobile facilities. The test technique involves applying a high current pulse to the grounding system with the proper waveshape and magnitude to simulate a lightning return stroke. Of concern were the step voltages present along the ground near the point of lightning strike. Step voltage is equated to how fast the current pulse is dissipated by the grounding system. The applied current pulse was produced by a high current capacitor bank with a total energy content of 80 kilojoules. A series of pulse tests were performed on two types of mobile facility grounding systems. One system consisted of an array of four 10 foot copper clad steel ground rods connected by 1/0 gauge wire. The other system was an array of 10 inch long tapered ground rods, strung on stainless steel cable. The focus here is on the pulse test technique used and its relevance to actual lightning strike conditions.

Walko, Lawrence C.↗
NASA NTRS1992

Crab pulsar giant pulses: Simultaneous radio and GRO observations

Observations are reported of the Crab pulsar made at radio frequencies concurrent with Oriented Scintillation Spectrometer Experiment (OSSE) observations from 15 to 27 May 1991. Using the 43 m telescope at Green Bank at 0.8 and 1.4 GHz, samples were made continuously for 10 hrs/day at intervals of 100 to 300 microsecs. The analysis of the radio data includes calculation of histograms of pulse intensities, absolute timing to about 20 microsec precision, and characterization of intensity variations on time scales from the 33 ms spin period to days. The most detailed analysis is presented made of giant pulses. The ultimate goal is to bin the radio data into giant and nongiant pulses and to form average waveforms of OSSE data for the corresponding pulse periods. A test is done to see whether the violet radio fluctuations (which are not seen in other radio pulsars to the same degree) are correlated with low energy gamma rays, yielding constraints on the radio coherence mechanism and the steadiness of the electron-positron outflow in the magnetosphere. Timing analysis of the radio data provides a well defined ephemeris over the specified range of epochs. The gamma ray pulse phase was predicted with an error of less than 70 microsecs.

Lundgren, Scott C.↗
NASA NTRS1990

The influence of gas velocity on surface heat pumping for the orifice pulse tube refrigerator

The basic pulse tube refrigerator produces cooling by a mechanism known as surface heat pumping. Cyclical compression and expansion of a gas within an enclosed tube produces large temperature gradients. The purpose of the tube is to act as 'nodal regenerator'. Heat is stored at node positions along the tube wall and is transported between nodes by moving gas parcels. This process gives rise to refrigeration, with hot temperatures at the closed end and cold temperatures at the open end. Unfortunately, much of the available refrigeration is not realized because the closed end of the basic pulse tube restricts gas movement - gas at the extreme temperatures does not come in contact with the heat exchangers. The orifice pulse tube overcomes this limitation by using a valve and surge volume assembly at the warm, closed end. This allows for a residual gas velocity to remain present during the heat transfer process, thereby permitting more gas to exchange heat at the heat exchangers. This paper describes the pulse tube as a nodal regenerator and the effect residual gas velocity has on the heat transfer mechanism of the orifice pulse tube.

Lee, J. M.↗