Search NASA⌕ Search

SEARCH · Search NASA

Results for “Partial oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Infrared reflection absorption spectroscopy and temperature-programmed desorption studies of CO adsorption on Ni/CeO 2 (111) thin films: The role of the ceria support

Ceria-supported Ni has shown unique catalytic activity due to unique properties of small Ni particles and strong metal-support interaction. Identification of adsorption sites and understanding the chemical interaction over Ni-ceria at the fundamental level provide crucial insights into the reaction pathways of complex catalytic processes. In this study, to probe the surface sites, the adsorption of CO was carried out with model Ni/ceria systems consisting of Ni nanoparticles vapor-deposited on well-ordered CeO x (111) (1.5 < x < 2) thin films using infrared reflection absorption spectroscopy (IRRAS) and temperature-programmed desorption (TPD) under ultrahigh vacuum (UHV) conditions. Fully oxidized CeO 2 (111) (Ce 4+ ) and partially reduced CeO 1.75 (111) (Ce 4+ /Ce 3+ ) thin films were grown on Ru(0001) to examine the role of the ceria support. Additionally, Ni with low coverages (e.g., 0.2 ML) grows forming small two-dimensional particles on ceria at 300 K, which develop into three-dimensional clusters after heating to 700 K. In the absence of Ni, CO adsorption at 1 mTorr at 100 K shows distinct IR bands at 2158 cm -1 on CeO 2 and 2165 cm -1 on CeO 1.75 . Bridging and atop IR bands associated with CO adsorption over metallic Ni were observed on the Ni-CeO 1.75 surface at 300 K under UHV conditions. CO adsorption over Ni 0 was also observed over as-deposited Ni on CeO 2 . However, a new IR band at 2146 cm -1 due to CO adsorption over Ni 2+ species was detected at 100 K over the annealed Ni particles on CeO 2 . CO IRRAS data suggest the oxidation of Ni to Ni 2+ on CeO 2 and the formation of predominant Ni 2+ species with heating, which is further confirmed with CO TPD data and previous x-ray photoelectron spectroscopy results.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Simulated production of OH, HO 2 , CH 2 O, and CO 2 during dilute fuel oxidation can predict 1st-stage ignition delays

Chemical kinetics simulations are used to explore whether detailed measurements of relevant chemical species during the oxidation of very dilute fuels (less than 1 Torr partial pressure) in a high-pressure plug flow reactor (PFR) can predict autoignition propensity. We find that for many fuels the timescale for the onset of spontaneous oxidation in dilute fuel/air mixtures in a simple PFR is similar to the 1st-stage ignition delay time (IDT) at stoichiometric engine-relevant conditions. For those fuels that deviate from this simple trend, the deviation is closely related to the peak rate of production of OH, HO 2 , CH 2 O, and CO 2 formed during oxidation. We use these insights to show that an accurate correlation between simulated profiles of these species in a PFR and 1st-stage IDT can be developed using convolutional neural networks. Our simulations suggest that the accuracy of such a correlation is 10–50%, which is appropriate for rapid fuel screening and may be sufficient for predictive fuel performance modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Robust dynamic operation of high temperature electrolysis solid oxide cells

Here, this study evaluates the durability of Ni/YSZ-supported SOECs under dynamic operating conditions relevant to real-world applications. Systematic tests were conducted to assess cell performance under steam cycling (3 to 75% humidified H 2 ), mode cycling between SOFC and SOEC operation, thermal cycling (150 to 750 °C at OCV, and 600 to 800 °C at 1.3V), and redox cycling (between 50% humidified H 2 and 50% humidified N 2 ). Steam cycling, mode cycling, and thermal cycling at OCV do not significantly accelerate performance degradation. Thermal cycling at 1.3V caused minimal damage within 600 to 800 °C. Full redox cycling (multi-hour oxidation holds) induced cell structural failure, while partial redox cycling (0.5 h holds) was tolerated. Extensive characterization revealed some material evolution, namely Sr and Co secondary phase formation, within the oxygen electrode due to La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ instability, especially for steam cycling and mode cycling. Minimal changes were identified within the Ni-YSZ fuel electrodes. These findings provide critical insights into SOEC reliability under dynamic conditions, supporting their application in dynamic or intermittent energy systems.

08 HYDROGEN↗
DOE OSTI2026

Unraveling Defect-Dependent Conductivity-Type Switching in CuFe 2 O 4 for Enhanced Photoelectrocatalytic Reduction of Benzaldehyde

Photoelectrocatalytic (PEC) reduction provides a sustainable route for upgrading biomass-derived feedstocks with reduced energy requirements, yet remains largely unexplored beyond hydrogen evolution and CO 2 reduction due to the scarcity of stable photocathodes. Here, we report a defect-engineered CuFe 2 O 4 photocathode that enables directly quantified PEC reduction of benzaldehyde to benzyl alcohol using a singlecomponent, earth-abundant oxide. By controlling annealing temperature and oxygen partial pressure, CuFe 2 O 4 is systematically tuned from n-type to p-type conductivity. Electrochemical measurements, X-ray and ultraviolet photoelectron spectroscopy, and firstprinciples defect calculations collectively show that oxygen-rich annealing conditions suppress deep donor-type oxygen vacancies while stabilizing shallow acceptor-type copper vacancies, resulting in enhanced hole concentration and improved charge transport. In a mixed acetonitrile/water electrolyte employing 1,4-benzoquinone as a redox mediator, the optimized CuFe 2 O 4 photocathode achieves stable photoelectrochemical operation over 18 h under continuous illumination with a benzyl alcohol production rate of 2.57 μmol/h at −0.50 V vs Ag/AgNO 3 , corresponding to a Faradaic efficiency of 51.3%. This PEC approach lowers the required applied potential by ∼1 V compared to traditional electrocatalytic methods, offering a more energy-efficient route for carbonyl reduction. These findings establish CuFe 2 O 4 as a viable photocathode platform for sustainable photoelectrocatalytic organic transformations under mild reaction conditions.

benzaldehyde reduction↗
DOE OSTI2023

Initial study on thermal stability of cold spray tantalum coating irradiated with deuterium for fusion applications

Abstract Removal of neutral hydrogen atoms in the plasma edge reduces the number of charge exchange events and thus, the net energy losses in the plasma, significantly improving performance of fusion devices. Effective control of the residual pressure of hydrogen isotopes (HIs) in the plasma edge may be achieved by utilizing a hydrogen absorbing first wall interface capable of withstanding the harsh fusion environment. In this study, we have investigated tantalum (Ta) coating deposited by cold spray technology on 316L stainless steel substrate as a potential plasma-facing material surface. High fluence low energy deuterium plasma irradiation experiments and subsequent thermal annealing cycles associated with thermal desorption spectrometry (TDS) demonstrated superior structural stability of the Ta coating. TDS experiments revealed the outgassing of deuterium (as measure of its retention) for cold spray Ta coatings to be three times higher than bulk Ta and two orders of magnitude greater than bulk polycrystalline W. X-ray photoelectron spectroscopy revealed evolution of oxidation states upon deuterium irradiation and a partial recovery of the metallic signature of Ta after the thermal treatment at 1100 K.

Physics↗
DOE OSTI2025

First-Principles Thermodynamic Assessments of Sr-Containing Secondary Phase Formation in La1-xSrxMnO3±δ Perovskites for Solid Oxide Cell Applications

Sr-secondary phase formation is a potentially significant degradation mode threatening solid-oxide cell (SOC) commercial viability. A first-principles thermodynamic study was performed for rhombohedral perovskite (La1-xSrx) MnO3±δ (LSM) to assess its stability against Sr secondary phase formation in SOC applications. In this work, the Sr secondary phase formation reaction free energies were determined by combining ab initio lattice dynamics calculations for the solid phases and an ab initio thermodynamics approach for the gas phases. Furthermore, this approach goes beyond previous thermodynamic modeling studies by integrating first-principles based point-defect equilibria into the analyses. The modeling results indicate an increased tendency to form SrO oxide from LSM upon decreasing the oxygen partial pressure. Additionally, enhancing factors to form the Sr-related secondary phase from the associated SrO activity in LSM are further quantified by considering the equilibrium of SrO reacting with contaminant gas species as a function of temperature and gas pressure.

Defect and phase stability↗
DOE OSTI2020

Unraveling the Effects of Melt–Mantle Interactions on the Gold Fertility of Magmas

The oxidation state of the Earth’s mantle and its partial melting products exert a key control on the behavior and distribution of sulfur and chalcophile and siderophile elements between the mantle and crust, underpinning models of ore deposit formation. Whether the oxidized nature of magmas is inherited from the asthenospheric mantle source or acquired during ascent and differentiation is vigorously debated, limiting our understanding of the mechanisms of extraction of sulfur and metals from the mantle. Here, we focused on the redox-sensitive behavior of sulfur in apatite crystallized from quenched alkaline basaltic melts preserved within a peridotite xenolith from the El Deseado Massif auriferous province in southern Patagonia. We took advantage of this unique setting to elucidate the redox evolution of melts during their ascent through the subcontinental lithospheric mantle (SCLM) and grasp the inner workings of the Earth’s mantle during gold metallogenesis. Our data reveal that an initially reduced silicate melt (ΔFMQ -2.2 to -1.2) was oxidized to ΔFMQ between 0 and 1.2 during percolation and interaction with the surrounding peridotite wall-rock (ΔFMQ 0 to +0.8). This process triggered changes in sulfur speciation and solubility in the silicate melt, boosting the potential of the melt to scavenge ore metals such as gold. We suggest that large redox gradients resulting from the interaction between ascending melts and the surrounding mantle can potentially modify the oxidation state of primitive melts and enhance their metallogenic fertility. Among other factors including an enriched metal source and favorable geodynamic conditions, redox gradients in the mantle may exert a first-order control on the global-scale localization of crustal provinces endowed with gold deposits.

58 GEOSCIENCES↗
DOE OSTI2024

MIP-4 is Induced by Bleomycin and Stimulates Cell Migration Partially via Nir-1 Receptor

Background. CC-chemokine ligand 18 also known as MIP-4 is a chemokine with roles in inflammation and immune responses. It has been shown that MIP-4 is involved in the development of several diseases including lung fibrosis and cancer. How exactly MIP-4 is regulated and exerts its role in lung fibrosis remains unclear. Therefore, in the present study, we examined how MIP-4 is regulated and whether it acts via its potential receptor Nir-1. Materials and Methods. A549 cells were grown and maintained in DMEM : F12 (1 : 1) and supplemented with 10% FBS and 1000 U of penicillin/streptomycin and maintained as recommended by the manufacturer (ATCC). Cell migration and invasion, immunohistochemistry (IHC), Western blot, qPCR, and siRNA Nir-1 were used to determine MIP-4 regulation and its role in cell migration. Results. Cell migration was increased following stimulation of cells with recombinant (r) MIP-4 and bleomycin (BLM), whereas quenching rMIP-4 with its antibody (Ab) or addition of the Ab to BLM or H 2 O 2 diminished rMIP-4-induced cell migration. Along with cell migration, rMIP-4, BLM, and H 2 O 2 induced the formation of actin filaments dynamic structures whereas costimulation with MIP-4 Ab limited BLM- and H 2 O 2 -induced effects. MIP-4 mRNA and protein were increased by BLM and H 2 O 2 , and the addition of its Ab significantly reduced treatments effect. Experiments with siRNA investigating whether Nir-1 is a potential MIR-4 receptor indicated that the inhibition of Nir-1 decreased cell migration/invasion but did not totally inhibit rMIP-4-induced cell migration. Conclusion. Therefore, our data indicate that MIP-4 is regulated by BLM and H 2 O 2 and costimulation with its Ab limits the effects on MIP-4 and that the Nir-1 receptor partially mediates MIP-4’s effects on increased cell migration. These data also evidenced that MIP-4 is regulated by fibrotic and oxidative stimuli and that quenching MIP-4 with its Ab or therapeutically targeting the Nir-1 receptor may partially limit MIP-4 effects under fibrotic or oxidative stimulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Theoretical understanding of stability of the oxygen electrode in a proton-conductor based solid oxide electrolysis cell

The oxygen electrode in a proton-conductor based solid oxide cells is often a triple-conducting material that enables the transport and exchange of electrons (e - ), oxygen ions (O 2- ), and protons (H + ), thus expanding active areas to enhance the oxygen electrode activity. In this work, a theoretical model was developed to understand stability of tri-conducting oxygen electrode by studying chemical potentials of neutral species (i.e., μ o 2 , μ H 2 , and μ H 2 O ) as functions of transport properties, operating parameters, and cell geometry. Our theoretical understanding shows that (1): In a conventional oxygen-ion based solid oxide cell, a high μ o 2 (thus high oxygen partial pressure) exists in the oxygen electrode during the electrolysis mode, which may lead to the formation of cracks at the electrode/electrolyte interface. Further, while in a proton-conductor based solid oxide cell, the μ o 2 is reduced significantly, suppressing the crack formation, and resulting in improved performance stability (2). In a typical proton-conductor based solid oxide electrolyzer, the dependence of μ o 2 on the Faradaic efficiency is negligible. Hence, approaches to block the electronic current can improve the electrolysis efficiency while achieving stability (3). The difference of the μ o 2 (thus p o 2 ) between the oxygen electrode and gas phase can be reduced by using higher ionic conducting components and improving electrode kinetics, which lead to further improvement of electrode stability.

08 HYDROGEN↗
DOE OSTI2020

Aerosol Optical Tweezers Elucidate the Chemistry, Acidity, Phase Separations, and Morphology of Atmospheric Microdroplets

Aerosol particles represent unique chemical environments because of their high surface area-to-volume ratio that promotes the effects of interfacial chemistry in confined environments. Properties such as viscosity, diffusivity, water content, pH, and morphology—following liquid–liquid phase separation—can strongly alter how a particle interacts with condensable vapors and reactive trace gases, thus modifying its continual evolution and environmental effects. Our understanding of this chemical evolution of atmospheric particulate matter and its environmental impacts is largely limited by our ability to directly observe how these critical particle properties respond to the addition or reactive uptake of new chemical components. Aerosol optical tweezers (AOT) stably trap particles in focused laser beams, providing positional control and the retrieval of many of these critical properties required to understand and predict the chemistry of aerosolized microdroplets. The analytical power of the AOT stems from the retrieval of the cavity-enhanced Raman spectrum induced by the trapping laser. Analysis of the whispering gallery modes (WGMs) that resonate as a standing wave around the droplet’s interface, provide high accuracy measurements of the droplet’s size, refractive index (and thus a measurement of composition), and can distinguish between core–shell, partially engulfed, and homogeneous morphologies. In this study, we have advanced the ability to determine the properties of the core and shell phases in biphasic droplets, including obtaining high-accuracy pH measurements. These capabilities were applied to perform AOT physical chemistry experiments on authentic secondary organic aerosol (SOA) produced directly in the AOT chamber by ozonolysis of terpene vapors. The propensity of the SOA to phase separate as a shell from a wide range of nonpolar to polar core phases was observed, along with the discovery of a stable emulsified state of SOA particles in an aqueous salt droplet. Micron-thick SOA shells did not impede the gain or loss of water or squalane from the core to the surrounding air, indicating no significant diffusional limitations to condensational growth or partitioning even under dry conditions. These experiments formed the foundation of a new framework that predicts how the phase-separated morphology of complex aerosols containing organic carbon evolves during continual atmospheric oxidation processes. Increases in oxidation state will quickly drive conversion from a partially engulfed to core–shell morphology that has dramatically different chemical reactivity since the core phase is completely concealed by the shell. The recent advances in the experimental capabilities of the AOT technique such as presented here enable novel experimental methodologies that provide insights into the chemistry and multidimensional properties of aerosol microdroplets, and how these coevolve and respond to continual chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

N-induced soil acidification triggers metal stimulation of soil methane oxidation in a temperate steppe ecosystem

Methane (CH 4 ) is a potent greenhouse gas, and it is well established that low nitrogen (N) stimulates- and high N suppresses CH 4 oxidation in grassland ecosystems. Here, in this study, we examined the response of CH 4 uptake to long-term (>10 years) multi-level N additions in a temperate steppe of northern China. The N impacts on CH 4 uptake transitioned from positive to negative at the N addition rate of 4 g N m -2 y -1 . However, the high-N suppression on CH 4 uptake was partially relieved when the continuous (>10 years) high N inputs (16 g N m -2 y -1 to 64 g N m -2 y -1 ) caused soil pH drop to < 5.7. Further experiments revealed that continuous high-N inputs acidified soil to pH < 5.7 that released metal ions to stimulate monooxygenase enzyme activity; therefore, the CH 4 oxidation suppression was partially relieved under continuous N loading. Structural equation model results confirmed that metal ions, such as Iron (Fe 3+ ), Manganese (Mn 4+ ), and Copper (Cu) desorbed by soil particles, were negatively correlated with soil pH while positively correlated with CH 4 oxidation under high N inputs. These analyses suggested that continuous high N inputs-induced soil acidification can release previously bounded metal elements that partially alleviated the N suppression on CH 4 uptake. The N-induced soil acidification impacts on CH 4 uptake might play a critical role in global CH 4 cycling and deserve further investigation as external N inputs continue climbing.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Perovskite-driven solar C 2 hydrocarbon synthesis from CO 2

Photoelectrochemistry (PEC) presents a direct pathway to solar fuel synthesis by integrating light absorption and catalysis into compact electrodes. Yet, PEC hydrocarbon production remains elusive due to high catalytic overpotentials and insufficient semiconductor photovoltage. Here we demonstrate ethane and ethylene synthesis by interfacing lead halide perovskite photoabsorbers with suitable copper nanoflower electrocatalysts. The resulting perovskite photocathodes attain a 9.8% Faradaic yield towards C 2 hydrocarbon production at 0 V against the reversible hydrogen electrode. The catalyst and perovskite geometric surface areas strongly influence C 2 photocathode selectivity, which indicates a role of local current density in product distribution. The thermodynamic limitations of water oxidation are overcome by coupling the photocathodes to Si nanowire photoanodes for glycerol oxidation. These unassisted perovskite–silicon PEC devices attain partial C 2 hydrocarbon photocurrent densities of 155 µA cm -2 , 200-fold higher than conventional perovskite–BiVO 4 artificial leaves for water and CO 2 splitting. These insights establish perovskite semiconductors as a versatile platform towards PEC multicarbon synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Quantifying Drivers of Methane Hydrobiogeochemistry in a Tidal River Floodplain System

The influence of coastal ecosystems on global greenhouse gas (GHG) budgets and their response to increasing inundation and salinization remains poorly constrained. In this study, we have integrated an uncertainty quantification (UQ) and ensemble machine learning (ML) framework to identify and rank the most influential processes, properties, and conditions controlling methane behavior in a freshwater floodplain responding to recently restored seawater inundation. Our unique multivariate, multiyear, and multi-site dataset comprises tidal creek and floodplain porewater observations encompassing water level, salinity, pH, temperature, dissolved oxygen (DO), dissolved organic carbon (DOC), total dissolved nitrogen (TDN), partial pressure of carbon dioxide (pCO 2 ), nitrous oxide (pN 2 O), methane (pCH 4 ), and the stable isotopic composition of methane (δ 13 CH 4 ). Additionally, we incorporated topographical data, soil porosity, hydraulic conductivity, and water retention parameters for UQ analysis using a previously developed 3D variably saturated flow and transport floodplain model for a physical mechanistic understanding of factors influencing groundwater levels and salinity and, therefore, CH 4 . Principal component analysis revealed that groundwater level and salinity are the most significant predictors of overall biogeochemical variability. The ensemble ML models and UQ analyses identified DO, water level, salinity, and temperature as the most influential factors for porewater methane levels and indicated that approximately 80% of the total variability in hourly water levels and around 60% of the total variability in hourly salinity can be explained by permeability, creek water level, and two van Genuchten water retention function parameters: the air-entry suction parameter α and the pore size distribution parameter m. These findings provide insights on the physicochemical factors in methane behavior in coastal ecosystems and their representation in local- to global-scale Earth system models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Quantifying the Influence of Defects on Selectivity of Electrodes Encapsulated by Nanoscopic Silicon Oxide Overlayers

Encapsulation of electrocatalysts and photocatalysts with semipermeable nanoscopic oxide overlayers that exhibit selective transport properties is an attractive approach to achieve high redox selectivity. However, defects within the overlayers-such as pinholes, cracks, or particle inclusions-may facilitate local high rates of parasitic reactions by creating pathways for facile transport of undesired reactants to exposed active sites. Scanning electrochemical microscopy (SECM) is an attractive method to determine the influence of defects on macroscopic performance metrics thanks to its ability to measure the relative rates of competing electrochemical reactions with high spatial resolution over the electrode. Here, we report the use of SECM to determine the influence of overlayer defects on the selectivity of silicon oxide (SiOx) encapsulated platinum thin-film electrocatalysts operated under conditions where two competing reactions-the hydrogen evolution and Fe(III) reduction reactions-can occur. After an SECM methodology is described to determine spatially resolved selectivity, representative selectivity maps are correlated with the location of defects that are characterized by optical, electron, and atomic force microscopies. This analysis reveals that certain types of defects in the oxide overlayer are responsible for ∼60-90% of the partial current density toward the undesired Fe(III) reduction reaction. By correcting for defect contributions to Fe(III) reduction rates, true Fe(III) permeability values for the SiOxoverlayers were determined to be over an order of magnitude lower than permeabilities determined from analyses that ignore the presence of defects. Lastly, different types of defects were studied revealing that defect morphology can have varying influence on both redox selectivity and calculated permeability. This work highlights the need for spatially resolved measurements to evaluate the performance of oxide-encapsulated catalysts and understand their performance limits.

25 ENERGY STORAGE↗
DOE OSTI2025

Alkali Metal Control of Triplet-Mediated C–H Activation in Iron-Mediated Coupling of Dinitrogen and Benzene

Direct coupling of N 2 with abundant feedstocks like benzene to form N-containing organic compounds is a promising strategy for N 2 fixation pathways. The challenge of coupling N 2 activation and C–H bond oxidative addition was recently solved by introducing a reversible benzene C–H bond activation process mediated by a low-valent Fe(0) complex, which gave an organometallic product that could couple with partially reduced N 2 . Interestingly, the energetics of the C–H oxidative addition/reductive elimination step depends on the choice of alkali metal. However, the reason why the alkali metal influences the C–H bond activation remained elusive. In this work, we present a comprehensive study on this Fe(0)-mediated reversible C–H activation. Through density functional theory combined with high-level coupled cluster calculations, we discovered that the intermediate-spin triplet (S = 1) controls the energy of the transition state for C–H cleavage, while the high-spin quintet (S = 2) controls the position of the equilibrium. Na + drives the equilibrium toward oxidative addition due to an electrostatic effect, while K + and Rb + are dominated by a steric effect that favors the iron(0) species. The key role played by nonbonding interactions in the Fe-mediated C–H activation provides a conceptual model for alkali control over organometallic transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Fast Charging of Li-Ion Cells: Part III. Relaxation Dynamics and Trap-Controlled Lithium Ion Transport

Fast charging of Li-ion batteries would ease consumer concerns regarding refueling time of electric vehicles. In this series of articles, we are systematically examining the effects of high currents flowing through the cell. Here we consider open-circuit relaxation dynamics for cell voltage and individual electrode potentials after abrupt termination of steady-state charging currents (1-6C) or short current pulses (< 30 s) of either polarity (to 16C). We demonstrate that dispersive kinetics observed after these current perturbations become faster for higher currents applied before the rest period. Our observations indicate that the voltage relaxation behaviors (i) depend on the current during charge, and less so on the state of charge, (ii) display universal stretched-exponential kinetics, (iii) can be induced by a short current pulse, (iv) require a minimum amount of charge transfer during the pulse, and (v) originate mainly from the oxide cathode. Trap controlled Li + ion transport through a partially disordered oxygen-depleted subsurface layer in the cathode is suggested as a possible origin for the relaxation behavior. The slow multidecadal responses to high currents can cause the nonlinearities observed during rapid charging of the electrochemical cells, reported in Part 2 of this series.

25 ENERGY STORAGE↗