Search NASA⌕ Search

SEARCH · Search NASA

Results for “Planetary Boundary Layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

A senstitivity study of the ground hydrologic model using data generated by an atmospheric general circulation model

The Ground Hydrologic Model (GHM) developed for use in an atmospheric general circulation model (GCM) has been refined. A series of sensitivity studies of the new version of the GHM were conducted for the purpose of understanding the role played by various physical parameters in the GHM. The following refinements have been made: (1) the GHM is coupled directly with the planetary boundary layer (PBL); (2) a bulk vegetation layer is added with a more realistic large-scale parameterization; and (3) the infiltration rate is modified. This version GHM has been tested using input data derived from a GCM simulation run for eight North America regions for 45 days. The results are compared with those of the resident GHM in the GCM. The daily average of grid surface temperatures from both models agree reasonably well in phase and magnitude. However, large difference exists in one or two regions on some days. The daily average evapotranspiration is in general 10 to 30% less than the corresponding value given by the resident GHM.

Sun, S. F.↗
NASA NTRS1986

Analysis of Doppler lidar wind measurements

Doppler lidar and multiple Doppler radar data were obtained in a convectively mixed planetary boundary layer. The lidar measurements were possible due to scattering from existing aerosols; radar reflecting chaff was released in the atmosphere to make it visible to the multiple Doppler radar network. The data were analyzed to obtain detailed horizontal wind structures. The divergence of the horizontal wind was calculated and the anelastic continuity equation integrated to obtain vertical air motions. Differences between the areally averaged quantities and the grid point values provided a measure of the fluctuations in the wind components or the turbulent wind fluctuations. Vertical profiles of the mean winds and quantities related to the turbulent kinetic energy components and the turbulent momentum transfers were also calculated.

Srivastava, R. C.↗
NASA NTRS1985

Influence of local land-surface processes on the Indian monsoon - A numerical study

Integrations made with general circulation models to investigate the influence of changes in the land-surface fluxes, over the Indian subcontinent, on the monsoon circulation and rainfall are presented. The experiments conducted include: (1) a control, (2) increased land-surface albedo, (3) increased land-surface albedo and reduced land-surface roughness, and (4) increased land-surface albedo, reduced surface roughness, and no evapotranspiration. A comparison of ensemble means of the data is provided; a decrease in rainfall is observed when the surface albedo is increased and the surface roughness reduced. Low surface roughness makes the horizontal transport of planetary boundary layer (PBL) westerly, reducing cross-isobaric moisture and thereby rainfall. Evapotranspiration had no influence on rainfall because of the PBL motion and moisture convergence. The correlation between surface albedo, surface roughness and vegetation is examined.

Sud, Y. C.↗
NASA NTRS1986

On satellite scatterometer capabilities in air-sea interaction

The verified capabilities and some practical usage of the satellite scatterometer in geophysical data production have demonstrated the value of this instrument. This evaluation of scatterometer ability to measure marine winds includes the scatterometer verification data, the state of the art planetary boundary layer model relating the wind profile in the atmosphere to the surface stress, and the pertinent results of the Storms Response Experiment.

Brown, R. A.↗
NASA NTRS1986

Comments on 'Frontogenesis in a moist semigeostrophic model'

The development of narrow updrafts or jetlike features in the vertical motion field (VMF) over the leading edge of a surface frontal zone is examined on the basis of model simulations, summarizing and clarifying the results presented by Keyser and Anthes (1982) and responding to critical remarks by Mak and Bannon (1984). Typical velocity and potential-temperature cross sections are shown, and it is concluded that the inclusion of generally parameterized planetary-boundary-layer (PBL) physics in the model has a significant effect on the VMF, suggesting that frictional processes alone (without latent heating) can explain the formation of jetlike frontal updrafts. In a reply by Mak and Bannon it is argued that the increased strength of the VMF in models including PBL physics is not significant, whereas other models show that the VMF can be significantly strengthened and narrowed by condensational heating alone.

Keyser, D.↗
NASA NTRS1986

MIE Lidar proposed for the German Space Shuttle Mission D2

Firm plans for a second German Spacelab mission (D2-mission), originally scheduled for late 1988 is basically a zero-g mission, but will also include earth observation experiments. On board the D2-facility will allow performance of a number of different measurements with the goal to obtain performance data (cloud top heights, height of the planetary boundary layer, optical thickness, and cloud base height of thin and medium thick clouds, ice/water phase discriminatin for clouds, tropopause height, tropaspheric height, tropospheric aerosols, and stratospheric aerosols.

Renger, W.↗
NASA NTRS1986

The Lidar In-Space Technology Experiment (LITE)

A spaceborne lidar system is presently being constructed for flight aboard the U. S. Space Shuttle in early 1991. The experiment, Lidar In Space Technology Experiment (LITE), utilizes a neodymium:YAG laser and 0.85 meter effective diameter Cassegranian-configured telescope receiver for making elastic backscatter measurements. The laser will be frequency doubled and tripled simulataneously producing a 10 Hz rate of 200 mJ at 1064 nm, 400 mJ at 532 nm, and 150 mJ at 355 nm. The technological objectives of LITE are to evaluate lidar system operations in space, lidar techniques in space, and to provide a test bed for new lidar technologies in later flights. The measurement objectives include the determination of cloud top and planetary boundary layer heights, the measurement of tropospheric and stratospheric aerosols, and the measurement of temperature and density between 10 to 40 km altitude. Detailed simulations will be presented showing the errors associated with each of these measurement objectives. In addition, the experiment scenario will be described including measurement times, data flow, processing and archival, and initial plans for validation of the LITE data set with correlative measurements.

Mccormick, M. P.↗
NASA NTRS1985

Sensitivity of a mesoscale model to initial specification of relative humidity, liquid water and vertical motion

The influence of synoptic scale initial conditions on the accuracy of mesoscale precipitation modeling is investigated. Attention is focused on the relative importance of the water vapor, cloud water, rain water, and vertical motion, with the analysis carried out using the Limited Area Mesoscale Prediction System (LAMPS). The fully moist primitive equation model has 15 levels and a terrain-following sigma coordinate system. A K-theory approach was implemented to model the planetary boundary layer. A total of 15 sensitivity simulations were run to investigate the effects of the synoptic initial conditions of the four atmospheric variables. The absence of synoptic cloud and rain water amounts in the initialization caused a 2 hr delay in the onset of precipitation. The delay was increased if synoptic-scale vertical motion was used instead of mesoscale values. Both the delays and a choice of a smoothed moisture field resulted in underestimations of the total rainfall.

Kalb, M. W.↗
NASA NTRS1986

Ocean surface pressure fields from satellite-sensed winds

The University of Washington's planetary boundary layer model is inverted to use remotely sensed satellite scatterometer-derived surface winds as input to calculate maritime surface pressure fields. The analysis of three different synoptic storm situations is performed using the model and is then compared to conventional National Weather Service analyses. Agreement is good. Isolation of the PBL secondary flow, stratification and thermal wind effects in the model revealed that each may be significant under certain conditions. However, the model shows sensitivity to the thermodynamic features only in a general sense and even a neutral stratification solution gives a good approximation. The high density of the scatterometer data produces mesoscale (hundreds of kilometers) dynamic details, which cannot be confirmed by conventional data at this stage.

Brown, Robert A.↗
NASA NTRS1987

The error associated with use of various forms of the divergence equation to diagnose geopotential and temperature

This study utilizes a model-generated data set to evaluate the errors associated with the diagnosis of geopotential height using three approximate forms of the divergence equation (DE). The DE was solved on the original sigma-coordinate surfaces of the model to exclude any error produced in the process of interpolating the data from observation points to the coordinate surface of the DE. An inviscid, nonlinear, divergent DE produced rms geopotential height errors as large as 3 m and rms temperature errors of over 26 C in the lower planetary boundary layer (PBL), with minimal errors above 800 mb. Elimination of the isobaric divergence in the velocity field caused additional height errors of 5-6 m and temperature errors of 0.4-1.2 C in the free troposphere. Use of a further-degraded DE without nonlinear terms caused height errors of 10-15 m in the upper troposphere with modestly increased temperature errors. Error fields at all levels had synoptic-scale features, with some mesoalpha structure. No spatial noise was apparent. Use of a temporal spectral filter to eliminate high-frequency modes from the model-generated data did not significantly influence the error associated with use of various forms of the DE.

Modica, George M.↗
NASA NTRS1987

Downdrafts within High Plains cumulonimbi. I - General kinematic structure

Results from a comprehensive investigation in which observations from several case studies are integrated with three-dimensional cloud model results to examine the general kinematic structure of downdrafts associated with High Plains precipitating convection are presented. One particular downdraft type, the low-level precipitation-associated downdraft, is the focus of this paper. General airflow and trajectory patterns within low-level downdrafts are convergent from 0.8 km upwards to downdraft top, typically less than 5 km AGL. Observed mass flux profiles often increase rapidly with height as a result of strong buoyancy forcing below the melting level. Inflow to the low-level downdraft, although vertically continuous can be separated into two branches. The up-down branch originating within the planetary boundary layer initially rises up to 4 km and then descends within the main precipitation-associated downdraft. The midlevel branch, usually more pronounced during early downdraft stages, originates from above the PBL and transports low-valued theta sub e air to low levels. The depth of the low-level downdraft can be approximated by the environmental sounding transition level, defined as the vertical height interval separating conditionally unstable to neutral air below from roughly stable air above. The low-level downdraft is most frequently located along the upshear storm flank relative to the updraft, although a downshear downdraft may become common under higher environmental wind shear.

Knupp, Kevin R.↗
NASA NTRS1987

Enhancement of surface-atmosphere fluxes by desert-fringe vegetation through reduction of surface albedo and of soil heat flux

Under the arid conditions prevailing at the end of the dry season in the western Negev/northern Sinai region, vegetation causes a sharp increase relative to bare soil in the daytime sensible heat flux from the surface to the atmosphere. Two mechanisms are involved: the increase in the surface absorptivity and a decrease in the surface heat flux. By increasing the sensible heat flux to the atmosphere through the albedo and the soil heat flux reductions, the desert-fringe vegetation increases the daytime convection and the growth of the planetary boundary layer. Removal of vegetation by overgrazing, by reducing the sensible heat flux, tends to reduce daytime convective precipitation, producing higher probabilities of drought conditions. This assessment of overgrazing is based on observations in the Sinai/Negev, where the soil albedo is high and where overgrazing produces an essential bare soil. Even if the assessment for the Sinai/Negev does not quantitatively apply throughout Africa, the current practice in many African countries of maintaining a large population of grazing animals, can contribute through the mesoscale mechanisms described to reduce daytime convective precipitation, perpetuating higher probabilities of drought. Time-of-day analysis of precipitation in Africa appears worthwhile, to better assess the role of the surface conditions in contributing to drought.

Otterman, J.↗
NASA NTRS1988

The Cooperative VAS Program with the Marshall Space Flight Center

Work was divided between the analysis/forecast model development and evaluation of the impact of satellite data in mesoscale numerical weather prediction (NWP), development of the Multispectral Atmospheric Mapping Sensor (MAMS), and other related research. The Cooperative Institute for Meteorological Satellite Studies (CIMSS) Synoptic Scale Model (SSM) has progressed from a relatively basic analysis/forecast system to a package which includes such features as nonlinear vertical mode initialization, comprehensive Planetary Boundary Layer (PBL) physics, and the core of a fully four-dimensional data assimilation package. The MAMS effort has produced a calibrated visible and infrared sensor that produces imager at high spatial resolution. The MAMS was developed in order to study small scale atmospheric moisture variability, to monitor and classify clouds, and to investigate the role of surface characteristics in the production of clouds, precipitation, and severe storms.

Diak, George R.↗
NASA NTRS1989

Nonmigrating tides

Recently an interesting advancement in the study of nonmigrating tides has occurred. There have been two distinct approaches in works on this subject. One is based on mechanistic models as considering nonuniform global distribution of water vapor or heating only on land, solving a set of linear equations. It is found that insolation absorption of the nonuniformly distributed water vapor produces only weak nonmigrating tides in the lower thermosphere; the planetary boundary layer heating on land can explain the enhanced tides on land and those with short vertical wavelengths in the stratosphere. The other approach is novel and uses simulation on the general circulation model (GCM). This realistic model can reproduce tides globally and in many details. The enhancement of two nonmigrating modes as eastward traveling modes with a wave number 3 and westward traveling modes with a wave number 5 is in surprisingly good agreement with observation at sea level, at 700 mb and even at 300 mb.

Kato, S.↗
NASA NTRS1988

Assessment of recent resolution and parameterization changes in the GLA fourth order GCM

The Goddard Laboratory for Atmospheres' fourth-order GCM is under evaluation for the impact on model integrations of enhanced horizontal and vertical resolution, as well as the effects of such novel parameterization schemes as that of gravity-wave-drag, the Arakawa-Schubert (1974) cumulus parameterization, and an explicitly-resolved planetary boundary layer. While the doubling of the GMC's horizontal resolution to 2 deg in latitude and 2.5 deg in longitude has improved the model's predictive skill for 6-7 day forecasts, systematic errors associated with the model's climate drift lead to a deterioration in predictions for longer forecasts.

Helfand, H. M.↗
NASA NTRS1989

Surface dynamics of observed maritime fronts

The importance of various dynamical processes in the surface fronts over the ocean is investigated using the unique data set supplied by the Seasat-A satellite scatterometer, in conjunction with a planetary boundary layer model. The governing equations are presented, and a similarity model that includes the effects of shear and the effects of shear and deformation on an Ekman solution is derived. It is shown that surface friction is important in frontal processes through its role in determining the dissipation and the ageostrophic terms in the vorticity and divergence equations; the former normally acts to weaken a front while the latter acts to strengthen it. The magnitude and importance of these terms vary considerably at different stages and with stratification, thermal advection, and the deformation and shear forcing.

Levy, Gad↗
NASA NTRS1989

Effects of implementing the Simple Biosphere Model in a general circulation model

The Simple Biosphere Model (SiB) of Sellers et al., was designed to simulate the interactions between the earth's land surface and the atmosphere by treating the vegetation explicitly and realistically, thereby incorporating the biophysical controls on the exchanges of radiation, momentum, sensible and latent heat between the two systems. This paper describes the steps taken to implement SiB in a modified version of the National Meteorological Center's global spectral general circulation model (GCM) and explores the impact of the implementation on the simulated land surface fluxes and near-surface meteorological conditions. The coupled model (SiB-GCM) was used to produce summer and winter simulations. The same GCM was used with a conventional hydrological model (Ctl-GCM) to produce comparable 'control' summer and winter simulations for comparison. It was found that SiB-GCM produced a more realistic partitioning of energy at the land surface than Ctl-GCM. Generally, SiB-GCM, produced more sensible heat flux and less latent heat flux over vegetated land than did Ctl-GCM and this resulted in a much deeper daytime planetary boundary layer and reduced precipitation rates over the continents in SiB-GCM. In the summer simulation, the 200 mb jet stream was slightly weakened in the SiB-GCM relative to the Ctl-GCM results and analyses made from observations.

Sato, N.↗
NASA NTRS1989

Low level remote sensing: Orographic winds

The orographic flow data set was obtained from a flight program to measure the influence of orographic features on turbulence momentum, heat, and moisture fluxes. The NASA B-57 aircraft instrumented with probes for measuring the three fluctuating wind speed components, temperature, and humidity was the primary measuring vehicle. Ancillary measurements were made with several ground-based sensors. These include the NOAA radar wind profilers, the Boulder wind network, the PROFS mesoscale surface network, the Boulder Atmospheric Observatory 300 m tower, special rawinsonde observations, and the NOAA/WPL Doppler lidar. The major objective of the flight program was to provide planetary boundary layer parameter information for new and current general circulation computer models. A numerical code, WINDER, based on a discrete element technique was run to numerically model the water tunnel simulated flow. Comparison of the analytical model with the experimental results is very good. Physical fluid dynamic principles embedded in the computational model and visual and hot wire anemometer measurements from the simulation are being rationalized to develop a physical understanding of the vortex flow. The results will be interpreted as they pertain to full scale atmospheric flows.

Frost, Walter↗