Search NASA⌕ Search

SEARCH · Search NASA

Results for “Planetary boundary layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The Influence of Dust-Smoke Mixtures on Boundary Layer Processes and Nocturnal Warming in the Sahel

Using a single column model with ground-based, aircraft, and satellite data sets we assess the combined role of smoke and dust aerosols, land degradation/aridization (LDA), and their impact on the planetary boundary layer (PBL) in influencing near-surface air temperature over the Sahel. Our study is unique because it assesses the combined role of smoke and dust aerosols on PBL evolution and near-surface air temperatures during both day and nighttime. More importantly, using a theoretical framework, we provide a careful explanation of the geophysical processes responsible for the changes in PBL and near-surface air temperature. Our results indicate that during northern hemisphere winter months, dust, and smoke over Sahel radiatively combine to impact the PBL. We show that aerosol mixtures dominated by dust modify PBL height in a manner that minimizes/maximizes surface layer cooling/warming at times when daytime maximum/nocturnal minimum temperatures occur. Furthermore, we find that increasing smoke contribution to total column aerosol optical extinction counteracts nighttime warming through daytime cooling. When smoke constitutes half or more of to the total column aerosol optical extinction, the ratio of longwave to shortwave radiative forcing is less than 10%, and nighttime cooling ensues. Minimum temperature is most sensitive to changes in mid-visible aerosol optical depth (AOD) values <1 and doubling of dust AOD within this range during the 1950–1980 Sahelian LDA event is estimated to have a nocturnal warming potential of 0.6°C.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2001

Toward a Unified Parameterization of the Boundary Layer and Moist Convection: Simulations of Clear and Cloudy Convection - Part 3

A model that employs a new form of mass-flux closure (described in Part I of this paper) is applied to a variety of clear and cloudy planetary boundary layers (PBLs) including dry convection from the Wangara Experiment, trade wind cumulus from the Barbados Oceanographic and Meteorological Experiment (BOMEX), and marine stratocumulus from the Atlantic Stratocumulus Experiment (ASTEX). For Wangara, the simulated variances and fluxes match that expected from similarity arguments, while the mean state is a little less mixed than the observations. In the BOMEX simulation. the shape and magnitude of the fluxes and the turbulence kinetic energy budget agree with LES results and observations. However, the liquid water mixing ratio is too large. This is attributed to an underprediction of the skewness. In agreement with observations from the ASTEX experiment, many of the model-simulated fields distinctly reflect a regime in transition between the trade wind cumulus and the classic stratocumulus-topped boundary layers. In general, the simulated entrainment rate tends to be a little underpredicted in regimes where there is little cloud-top radiative cooling (Wangara and BOMEX), while it is overpredicted in regimes where this process is more critical (e.g., ASTEX). Prior work suggests that this may be related to the manner in which the pressure terms are parameterized in the model. Overall, the model is able to capture some key physical features of these PBL regimes, and appears to have the potential to represent both cloud and boundary layer processes. Thus, this approach is a first step toward unifying these processes in large-scale models.

Lappen, Cara-Lyn↗
NASA NTRS2019

The Interaction Between Boundary Layer and Convection Schemes in a WRF Simulation of Post‐Cold‐Frontal Clouds over the ARM East North Atlantic Site

The correct representation of lowlevel midlatitude clouds found in the wake of cold fronts strongly relies on the representation of planetary boundary layer (PBL) and convection processes, which are typically parameterized separately in numerical models. Using the Weather Research and Forecasting Model (WRF), this study investigates how distinct pairs of PBL and convection parameterization schemes represent cloud fraction in the postcoldfrontal region. The simulations focus on the region of the DOEARM Eastern North Atlantic observation site in the Azores Islands in the wake of a cold front that passed on December 25, 2015. Different PBL and convection schemes are combined to create 12 distinct configurations. The main differences between the selected physical parameterizations are the strength of vertical mixing and the entrainment. The simulations produce a wide range of cloud fractions, where some configurations significantly underestimate while others clearly overestimate satellite and surfacebased estimates of cloud fraction. A skill score is used to quantitatively assess the performance of each configuration with respect to groundbased radar data. The key processes that are found to significantly impact the cloud fraction distribution are the strength of the PBL decoupling, the vertical wind shear, entrainment and detrainment rates in shallow convection and the occurrence of drizzle. This indicates that to successfully simulate postcoldfrontal clouds, modeled physics must balance strong internal vertical mixing and weak exchange with the free troposphere. For this case study, cloud fraction was more sensitive to the choice of convection scheme than PBL scheme.

moist convection interaction between parameterizat↗
NASA NTRS1993

A new approach to the study of the turbulence layer

Turbulent thermal convection is of considerable importance in fluid dynamical transport phenomena occurring, for example, in the planetary boundary layer of the Earth, the interiors of stars, and accretion disks. In particular, during a significant portion of the evolutionary phase of many stars having convectively unstable cores or outer envelopes, a substantial fraction of energy is transported from the central layers to the outer layers by thermal convection. Moreover, as much of the interior of a star is in highly turbulent motion, a complete theory of stellar structure and evolution requires the explicit consideration of turbulence in order to have expressions for the turbulent quantities arising in the stellar structure equations, and particularly, the turbulent fluxes that appear in the total flux conservation equation, such as the convective flux, kinetic energy flux, etc. A reliable quantification of these fluxes continues to present a challenge in astrophysical fluid dynamics, primarily because astrophysical turbulence is almost always fully-developed and nearly inviscid, and therefore governed by strong nonlinear interactions that distribute the energy among a very wide spectrum of eddies with scales ranging from the characteristic dimension of the flow to those sufficiently small to be affected by viscous dissipation. Furthermore, astrophysical flows are invariably compressible, anisotropic, and inhomogeneous, which requires the consideration of the dynamics of longitudinal modes and their interaction with the transverse modes, as well as complicated boundary conditions. In order to reach a compromise between analytical and numerical tractability and the basic physics of turbulent convection, we have constructed a model of stationary turbulent convection that yields various turbulence statistics, including the convective flux, that are required in stellar evolution models.

Levenson, Ruth A.↗
DOE OSTI2023

Observations of Boundary Layer Convergence Lines and Associated Updrafts in the U.S. Southern Great Plains

Abstract Boundary layer convergence lines (CLs) are highly effective at deep-convection initiation (DCI), suggesting that their associated updraft properties differ from those of more widespread turbulent updrafts in the planetary boundary layer (PBL). This study exploits observations at the Atmospheric Radiation Measurement Southern Great Plains (ARM SGP) observatory in Oklahoma from 2011 to 2016 to quantify CL properties and their relation to turbulent PBL eddies preceding CL arrival. Two independent methods for estimating CL properties are developed at two locations in the SGP region, both relying on the assumption of a 2D circulation in the CL-normal plane but using different combinations of instruments. The first (the radar method) relies mainly on scanning radar data and is applied to 61 CLs passing near a high-resolution scanning radar based in Nardin, Oklahoma, while the second (the surface method) relies mainly on surface wind data and is applied to 68 CLs crossing the SGP facility in nearby Lamont, Oklahoma. Mean daytime (1000–1900 LST) CL width (∼2 km) and convergence magnitude (∼0.003 s −1 ) are similar for both methods, and mean daytime CL depth is ∼0.75 km. The two methods disagree at night (0000–1000 and 1900–2400 LST), where the surface method estimates wider and weaker CLs than the radar method. This difference may stem from the radar beam overshooting the shallow, highly stable nocturnal PBL. The largest CL updrafts are slightly wider (∼20%) and stronger (∼40%) than the largest PBL updrafts in the pre-CL period, generating 50%–100% larger updraft mass fluxes over most of the PBL depth. Significance Statement Deep convection is commonly initiated by boundary layer convergence lines (CLs), which are associated with intense surface-based wind convergence and strong updrafts that may lift air to saturation. Although CLs form regularly, they are far less common than ordinary, short-lived turbulent thermals in the daytime boundary layer. To better understand why CLs are so effective at deep-convection initiation, we observationally quantify their morphologies and strengths and compare these properties to those of surrounding turbulent updrafts. Perhaps surprisingly, the CLs are found to exhibit only slightly larger scales and strengths as the turbulent updrafts. Although these marginal increases help to explain the preference for storms to initiate along CLs, they likely are not the whole story.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2023

A Methodology for Estimating the Energy and Moisture Budget of the Convective Boundary Layer Using Continuous Ground-Based Infrared Spectrometer Observations

Land-atmosphere interactions play a critical role in both the atmospheric water and energy cycles. Changes in soil moisture and vegetation alter the partitioning of surface water and energy fluxes, influencing diurnal evolution of the planetary boundary layer (PBL). The mixing diagram framework has proven useful in understanding the evolution of the heat and moisture budget within the convective boundary layer (CBL). We demonstrate that observations from the Department of Energy Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site provide all of the needed inputs needed for the mixing diagram framework, allowing us to quantify the impact from the surface fluxes, advection, radiative heating, encroachment, and entrainment on the evolution of the CBL. Profiles of temperature and humidity retrieved from the ground-based infrared spectrometer (called the Atmospheric Emitted Radiance Interferometer, or AERI) are a critical component in this analysis. Large eddy simulation results demonstrate that mean mixed-layer values derived are shown to be critical to close the energy and moisture budgets. A novel approach demonstrated here is the use of network of AERIs and Doppler lidars to quantify the advective fluxes of heat and moisture. The framework enables the estimation of the entrainment fluxes as a residual, providing a way to observe the entrainment fluxes without using multiple lidar systems. Finally, the high temporal resolution of the AERI observations enable the morning, midday, and afternoon evolution of the CBL to be quantified. This work provides a new way to use observations in this framework to evaluate weather and climate models.

Boundary layer↗
NASA NTRS1988

Photochemistry of biogenic emissions over the Amazon forest

The boundary layer chemistry over the Amazon forest during the dry season is simulated with a photochemical model. Results are in good agreement with measurements of isoprene, NO, ozone, and organic acids. Photochemical reactions of biogenic isoprene and NOx can supply most of the ozone observed in the boundary layer. Production of ozone is very sensitive to the availability of NOx, but is insensitive to the isoprene source strength. High concentrations of total odd nitrogen (NOy) are predicted for the planetary boundary layer, about 1 ppb in the mixed layer and 0.75 ppb in the convective cloud layer. Most of the odd nitrogen is present as PAN-type species, which are removed by dry deposition to the forest. The observed daytime variations of isoprene are explained by a strong dependence of the isoprene emission flux on sun angle. Nighttime losses of isoprene exceed rates of reaction with NO3 and O3 and appear to reflect dry-deposition processes. The 24-hour averaged isoprene emission flux is calculated to be 38 mg/sq m per day. Photooxidation of isoprene could account for a large fraction of the CO enrichment observed in the boundary layer under unpolluted conditions and could constitute an important atmospheric source of formic acid, methacrylic acid, and pyruvic acid.

Jacob, Daniel J.↗
NASA NTRS1999

Mesoscale Simulations of a Florida Sea Breeze Using the PLACE Land Surface Model Coupled to a 1.5-Order Turbulence Parameterization

A sophisticated land-surface model, PLACE, the Parameterization for Land Atmospheric Convective Exchange, has been coupled to a 1.5-order turbulent kinetic energy (TKE) turbulence sub-model. Both have been incorporated into the Penn State/National Center for Atmospheric Research (PSU/NCAR) mesoscale model MM5. Such model improvements should have their greatest effect in conditions where surface contrasts dominate over dynamic processes, such as the simulation of warm-season, convective events. A validation study used the newly coupled model, MM5 TKE-PLACE, to simulate the evolution of Florida sea-breeze moist convection during the Convection and Precipitation Electrification Experiment (CaPE). Overall, eight simulations tested the sensitivity of the MM5 model to combinations of the new and default model physics, and initialization of soil moisture and temperature. The TKE-PLACE model produced more realistic surface sensible heat flux, lower biases for surface variables, more realistic rainfall, and cloud cover than the default model. Of the 8 simulations with different factors (i.e., model physics or initialization), TKE-PLACE compared very well when each simulation was ranked in terms of biases of the surface variables and rainfall, and percent and root mean square of cloud cover. A factor separation analysis showed that a successful simulation required the inclusion of a multi-layered, land surface soil vegetation model, realistic initial soil moisture, and higher order closure of the planetary boundary layer (PBL). These were needed to realistically model the effect of individual, joint, and synergistic contributions from the land surface and PBL on the CAPE sea-breeze, Lake Okeechobee lake breeze, and moist convection.

Lynn, Barry H.↗
NASA NTRS1992

A pulsed CO2 Doppler lidar for boundary layer monitoring

A monostatic, master oscillator power amplifier (MOPA), CO2 pulsed Doppler lidar was constructed and tested. The system is compact (120 x 60 cm), operates at high pulse repetition rates (greater than 1 kHz) and is intended for simultaneous Doppler/Differential Absorption Lidar (DIAL) monitoring of the planetary boundary layer. Details of the system design, hard target calibrations, and aerosol returns are presented.

Pearson, Guy N.↗
NASA NTRS1992

On the existence of convectively produced gravity waves

The Boundary Layer Lidar System (BLLS), together with the gustprobe system onboard the NASA Electra has acquired a unique data set which, for the first time, clearly depicts a gravity wave above a convectively driven planetary boundary layer (PBL). In addition, we believe that the data show the development of a trapped gravity wave over a period of about an hour. If this is the case, it would certainly be the first time that such a process has been seen in the atmosphere. We also conclude that the gravity wave, while being initiated by the convection in the PBL, ultimately acts to organize and control scales in the PBL.

Palm, Stephen P.↗
NASA NTRS2018

Changes in Tropical Clouds and Atmospheric Circulation Associated with Rapid Adjustment Induced by Increased Atmospheric CO2 – A Multiscale Modeling Framework Study

The radiative heating increase due to increased CO2 concentration is the primary source for the rapid adjustment of atmospheric circulation and clouds. In this study, we investigate the rapid adjustment resulting from doubling of CO2 and its physical mechanism using a multiscale modeling framework (MMF). The MMF includes an advanced higher-order turbulence closure in its cloud-resolving model component and simulates realistic shallow and deep cloud climatology and boundary layer turbulence. The rapid adjustment over the tropics is characterized by 1) reduced ascent and descent strengths over the ocean, 2) increased lower tropospheric stability (LTS) over the subsidence region, 3) shoaling of planetary boundary layers over the ocean, 4) increased deep convection over lands and shift of cloud coverage from the ocean to lands, and 5) reduced sensible (SH) and latent heat (LH) fluxes over the oceanic deep convective regions. Unlike conventional general circulation models and another MMF, a reduction in the global-mean shortwave cloud radiative cooling is not simulated, due to the increase in low clouds at lower altitudes over the ocean, resulting from reduced cloud-top entrainment due to strengthened inversion. Changes in regional circulation play a key role in cloud changes and shift of cloud coverage to lands. Weaker energy transport resulting from water vapor and cloud CO2 masking effects reduces the upward motion and convective clouds in the oceanic regions. The ocean-land transports are linked to the partitioning of surface SH and LH fluxes that increases humidity over lands and enhances deep convection over the tropical lands.

Xu, Kuan-Man↗
DOE OSTI2020

Impact of boundary layer simulation on predicting radioactive pollutant dispersion: a case study for HANARO Research Reactor using the WRF-MMIF-CALPUFF modeling system

Wind plays an important role in cases of unexpected radioactive pollutant dispersion, deciding distribution and concentration of the leaked substance. The accurate prediction of wind has been challenging in numerical weather prediction models, especially near the surface because of the complex interaction between turbulent flow and topographic effect. As such, in this study, we investigated the characteristics of atmospheric dispersion of radioactive material (i.e. 137 Cs) according to the simulated boundary layer around the HANARO research nuclear reactor in Korea using the Weather Research and Forecasting (WRF)-Mesoscale Model Interface (MMIF)-California Puff (CALPUFF) model system. We examined the impacts of orographic drag on wind field, stability calculation methods, and planetary boundary layer parameterizations on the dispersion of radioactive material under a radioactive leaking scenario. We found that inclusion of the orographic drag effect in the WRF model improved the wind prediction most significantly over the complex terrain area, leading the model system to estimate the radioactive concentration near the reactor more conservatively. We also emphasized the importance of the stability calculation method and employing the skillful boundary layer parameterization to ensure more accurate low atmospheric conditions, in order to simulate more feasible spatial distribution of the radioactive dispersion in leaking scenarios.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1987

Physical mechanisms of heat, momentum and turbulence fluxes

In a qualitative way, the physical mechanisms which generate fluxes of heat, momentum, and turbulence in the atmosphere are discussed. This material is presented to acquaint people with the Earth science aspects of turbulence as important processes in the atmosphere. To attempt to describe turbulent fluxes of heat, momentum, and moisture in precise mathematical detail becomes an intractable problem. It is burdened by an eighth order set of equations involving more variables than equations. It is a closure problem which requires complicated assumptions that are not necessarily always satisfied, variable boundary conditions, and sparse observational data. Therefore, we must approach the problem in a simplified manner to obtain any kind of solution involving the variables of shear, stress, and heat, moisture, and momentum fluxes. There are other problems, of course, in which the inclusion of the planetary boundary layer is extremely important. Air pollution studies, air-sea exchanges, mesoscale models, and so on, must account for the planetary layer in very specific terms. Some of the physical mechanisms that are involved in generating fluxes are described.

Theon, John S.↗
NASA NTRS1991

Aerosol backscatter measurements at 10.6 microns with airborne and ground-based CO2 Doppler lidars over the Colorado High Plains. II - Backscatter structure

Measurements of tropospheric aerosol volume backscatter coefficients at 10.6-microns wavelength were obtained with airborne continuous wave and ground-based pulsed CO2 Doppler lidars over the Colorado High Plains during a 20-day period in summer 1982. A persistent 'background' layer was found between 6- and 10-km altitude, with a generally uniform backscatter mixing ratio of about 10 to the -10th sq m/kg per sr. The upper boundary of this background layer varied with the tropopause height; the lower boundary varied with the strength and diurnal cycle of convective mixing in the planetary boundary layer (PBL). For quiescent meteorological conditions, the transition from the PBL to the background layer was usually very sharp, with backscatter decreases sometimes as large as 3 decades in about 70 m. Sharp gradients were also found at the boundaries of shallow (tens of meters) subvisible cirrus clouds. For less stable conditions, associated with vertical aerosol transport by deep cumuliform clouds, backscatter tended to decrease exponentially with altitude.

Bowdle, David A.↗
NASA NTRS1999

Development of Prototype Micro-Lidar using Narrow Linewidth Semiconductor Lasers for Mars Boundary Layer Wind and Dust Opacity Profiles

We have developed a compact Doppler lidar concept which utilizes recent developments in semiconductor diode laser technology in order to be considered suitable for wind and dust opacity profiling in the Mars lower atmosphere from a surface location. The current understanding of the Mars global climate and meteorology is very limited, with only sparse, near-surface data available from the Viking and Mars Pathfinder landers, supplemented by long-range remote sensing of the Martian atmosphere. The in situ measurements from a lander-based Doppler lidar would provide a unique dataset particularly for the boundary layer. The coupling of the radiative properties of the lower atmosphere with the dynamics involves the radiative absorption and scattering effects of the wind-driven dust. Variability in solar irradiance, on diurnal and seasonal time scales, drives vertical mixing and PBL (planetary boundary layer) thickness. The lidar data will also contribute to an understanding of the impact of wind-driven dust on lander and rover operations and lifetime through an improvement in our understanding of Mars climatology. In this paper we discuss the Mars lidar concept, and the development of a laboratory prototype for performance studies, using, local boundary layer and topographic target measurements.

Menzies, Robert T.↗
DOE OSTI2021

Simulated Dust Transport in the Convective Boundary Layer

Soil dusts are an important source of aerosol in agricultural regions and can affect the Earth's radiation budget through the modification of cloud properties, and in particular, through their ability to act as ice nucleating particles. In order to impact cloud properties, agricultural soil dusts need to be transported from the point of emission to cloud–relevant altitudes. Vertical transport within the planetary boundary layer is strongly controlled by turbulence and is challenging to represent accurately in regional and global models. Large–eddy simulations (LES) are run at resolutions capable of resolving most of the turbulent energy directly and can thus better simulate vertical transport. In this study, we leverage the LES ARM Symbiotic Simulation and Observation (LASSO) large–eddy simulations to simulate vertical transport of agricultural dust within the turbulent boundary layer using a modified version of the stochastic dispersion model FLEXPART–WRF. We find that the modified model is better capable of simulating particle transport due to turbulence, and that particle size was the greatest factor in determining particle lifetime. Individual meteorology and particle density had intermediate effects upon particle transport, while release height had little effect upon simulation results. Finally, we utilize a quasi–single column model (QSCM) approach to determine how our results compare to a parameterized treatment of turbulence. The QSCM simulations led to greater tracer transport out of the boundary layer, with ramifications for any studies utilizing a Lagrangian stochastic model to understand tracer dispersion. Furthermore, these results highlight the importance of accurately simulating turbulence for understanding particle transport.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1985

Cross-equatorial and boundary layer exchange: A FGGE review

The Global Weather Experiment (FGGE) provided unique data on the interesting phenomenon of cross-equatorial flow. Such motion is a key element of the seasonal cycle of the tropics, especially in monsoonal regions. The IIb obserations, IIIb assimilations, and implied dynamics of the flows are reviewed. Additional emphasis is given to the low level branches concentrated in the planetary boundary layer, including air sea interaction and vertical turbulence processes. The results of a recent MONEX Boundary Layer Workshop are summarized.

Young, J. A.↗
NASA NTRS1982

NASA participation in the 1980 PEPE/NEROS project: Data archive

Eight experimental air quality measurement systems were investigated during July and August 1980 as part of the EPA PEPE/NEROS fiel measurement program. Data from those efforts have been entered into an archive that may be accessed by other researchers. The data sets consists of airborne measurements of regional mixed layer heights and aerosol and ozone distributions as well as point measurements of meteorological parameters and ozone obtained during diurnal transitions in the planetary boundary layer. This report gives a discussion of each measurement system, a preliminary assessment of data quality, a description of the archive format for each data set, and a summary of several proposed scientific studies which will utilize these data.

Brewer, D. A.↗