Search NASA⌕ Search

SEARCH · Search NASA

Results for “Point Optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Relationship Between Optimal Gain and Coherence Zone in Flight Simulation

In motion simulation the inertial information generated by the motion platform is most of the times different from the visual information in the simulator displays. This occurs due to the physical limits of the motion platform. However, for small motions that are within the physical limits of the motion platform, one-to-one motion, i.e. visual information equal to inertial information, is possible. It has been shown in previous studies that one-to-one motion is often judged as too strong, causing researchers to lower the inertial amplitude. When trying to measure the optimal inertial gain for a visual amplitude, we found a zone of optimal gains instead of a single value. Such result seems related with the coherence zones that have been measured in flight simulation studies. However, the optimal gain results were never directly related with the coherence zones. In this study we investigated whether the optimal gain measurements are the same as the coherence zone measurements. We also try to infer if the results obtained from the two measurements can be used to differentiate between simulators with different configurations. An experiment was conducted at the NASA Langley Research Center which used both the Cockpit Motion Facility and the Visual Motion Simulator. The results show that the inertial gains obtained with the optimal gain are different than the ones obtained with the coherence zone measurements. The optimal gain is within the coherence zone.The point of mean optimal gain was lower and further away from the one-to-one line than the point of mean coherence. The zone width obtained for the coherence zone measurements was dependent on the visual amplitude and frequency. For the optimal gain, the zone width remained constant when the visual amplitude and frequency were varied. We found no effect of the simulator configuration in both the coherence zone and optimal gain measurements.

Gracio, Bruno Jorge Correia↗

Controlling superconductivity in La 2-x Sr x CuO 4+δ by ozone and vacuum annealing

In this study we performed a series of ozone and vacuum annealing experiments on epitaxial La 2-x Sr x CuO 4+δ thin films. The transition temperature after each annealing step has been measured by the mutual inductance technique. The relationship between the effective doping and the vacuum annealing time has been studied. Short-time ozone annealing at 470 °C oxidizes an underdoped film all the way to the overdoped regime. The subsequent vacuum annealing at 350 °C to 380 °C slowly brings the sample across the optimal doping point back to the undoped, non-superconducting state. Several ozone and vacuum annealing cycles have been done on the same sample and the effects were found to be repeatable and reversible Vacuum annealing of ozone-loaded LSCO films is a very controllable process, allowing one to tune the doping level of LSCO in small steps across the superconducting dome, which can be used for fundamental physics studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Using energy storage systems to extend the life of hydropower plants

Despite their advantages, distributed energy resources (DERs) bring inherent uncertainty and variability into the landscape of modern power systems. As DER penetration grows, conventional generators like hydropower plants have to respond more often to arrest the imbalance in the net load. Hydropower turbines provide their best operational performance with minimal wear and tear when operating at regions of maximum efficiency. However, the current needs for hydropower plants require them to operate under varying load conditions and thus sub-optimal operating points leading to additional stress. To relieve the hydropower plants, this paper proposes a hybridization strategy where a hydropower unit is paired with an energy storage system (ESS) to increase operational flexibility and mitigate damage to the hydro plant. Models are developed to represent the operation of the hybrid system, quantify degradation, and assess economic benefits. Moreover, an innovative controller disaggregates the market dispatch signal into separate control setpoints for the ESS and hydropower unit. In case studies performed on a real-world hydropower facility, it was found that the ESS-based hybridization can extend the life of the hydropower plant by 5% on average. Notably, the economic benefits from reduced maintenance and deferred investment are estimated to be around $3.6 million.

13 HYDRO ENERGY↗

Plastic additives in the ocean: Use of a comprehensive dataset for meta-analysis and method development

In excess of 13,000 chemicals are added to plastics (‘additives’) to improve performance, durability, and production of plastic products. They are categorized into numerous chemical classes including flame retardants, light stabilizers, antioxidants, and plasticizers. While research on plastic additives in the marine environment has increased over the past decade, there is a lack of methodological standardization. To direct future measurement of plastic additives, we compiled a first-of-its-kind dataset of literature assessing plastic additives in marine environments, delineated by sample type (plastic debris, seawater, sediment, biota). Using this dataset, we performed a meta-analysis to summarize the state of the science. Currently, our dataset includes 217 publications published between 1978 and May 2023. The majority of publications analyzed plastic additives in biota collected from Europe and Asia. Analyses concentrated on plasticizers, brominated flame retardants, and bisphenols. Common sample preparation techniques included Solvent - Agitation extraction for plastic, sediment, and biota samples, and Solid Phase Extraction for seawater samples with dichloromethane and solvent mixtures including dichloromethane as the organic extraction solvent. Finally, most analyses were performed utilizing gas chromatography/mass spectrometry. There are a variety of data gaps illuminated by this meta-analysis, most notably the small number of compounds that have been targeted for detection compared to the large number of additives used in plastic production. The provided dataset facilitates future investigation of trends in plastic additive concentration data in the marine environment (allowing for comparison to toxicity thresholds) and acts as a starting point for optimizing and harmonizing plastic additive analytical methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implications of real-gas behavior on refractive index calculations for optical diagnostics of fuel–air mixing at high pressures

Three models to compute the refractive index of gaseous mixtures at real gas conditions are presented with the purpose to improve the accuracy of state relationships between refractive index and thermodynamic properties. Models are compared with experimental data to determine one that is applicable to high pressure mixtures with non-ideal thermodynamic behavior near or above a fluids’ critical point. The optimal model is applied to analyze adiabatic thermal mixing of fuel and air at typical diesel engine conditions. Our results show that the ideal gas mixture law is appropriate in the vapor region, assuming it is known, for example, from experimental measurements. Finally, the model is applied for binary fuel-air mixing at supercritical conditions to demonstrate its full potential.

02 PETROLEUM↗

Unifying Energy-Management Problems for Inverter-Based Power Networks

This paper outlines a suite of energy-management problems for inverter-based power networks from the vantage point of optimal control and (non)linear optimization. The problems are categorized based on timescales dictated by the network dynamics, and organized methodologically based on the problem complexity. A growing body of literature has addressed problems in this domain, albeit, with poorly motivated assumptions and behavioral models that obscure precise device behavior. With a combination of circuit- and control-theoretic lenses, we establish appropriate dynamic models for the networked resources, illustrate how common engineering assumptions arise, uncover how problems are linked, and postulate open challenges.

(non)linear optimization↗

Measuring Time to Biochemical Failure in the TROG 96.01 Trial: When Should the Clock Start Ticking?

Purpose: We sought to determine whether short-term neoadjuvant androgen deprivation (STAD) duration influences the optimal time point from which Phoenix fail (time to biochemical failure; TTBF) should be measured. Methods and Materials: In the Trans-Tasman Radiation Oncology Group 96.01 trial, men with locally advanced prostate cancer were randomized to 3 or 6 months STAD before and during prostatic irradiation (XRT) or to XRT alone. The prognostic value of TTBF measured from the end of radiation (ERT) and randomization were compared using Cox models. Results: Between 1996 and 2000, 802 eligible patients were randomized. In 436 men with Phoenix failure, TTBF measured from randomization was a powerful predictor of prostate cancer-specific survival and marginally more accurate than TTBF measured from ERT in Cox models. Insufficient data were available to confirm that TTBF measured from testosterone recovery may also be a suitable option. Conclusions: TTBF measured from randomization (commencement of therapy) performed well in this trial dataset and will be a convenient option if this finding holds in other datasets that include long-term androgen deprivation data.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Accurate Prediction of Pathological Rectal Tumor Response after Two Weeks of Preoperative Radiochemotherapy Using {sup 18}F-Fluorodeoxyglucose-Positron Emission Tomography-Computed Tomography Imaging

Purpose: To determine the optimal time point for repeated {sup 18}F-fluorodeoxyglucose-positron emission tomography (PET)-CT imaging during preoperative radiochemotherapy (RCT) and the best predictive factor for the prediction of pathological treatment response in patients with locally advanced rectal cancer. Methods and Materials: A total of 30 patients referred for preoperative RCT treatment were included in this prospective study. All patients underwent sequential PET-CT imaging at four time points: prior to therapy, at day 8 and 15 during RCT, and shortly before surgery. Tumor metabolic treatment responses were correlated with the pathological responses by evaluation of the tumor regression grade (TRG) and the pathological TN (ypT) stage of the resected specimen. Results: Based on their TRG evaluations, 13 patients were classified as pathological responders, whereas 17 patients were classified as pathological nonresponders. The response index (RI) for the maximum standardized uptake value (SUV{sub max}) on day 15 of RCT was found to be the best predictive factor for the pathological response (area under the curve [AUC] = 0.87) compared to the RI on day 8 (AUC = 0.78) or the RI of presurgical PET imaging (AUC = 0.66). A cutoff value of 43% for the reduction of SUV{sub max} resulted in a sensitivity of 77% and a specificity of 93%. Conclusions: The SUV{sub max}-based RI calculated after the first 2 weeks of RCT provided the best predictor of pathological treatment response, reaching AUCs of 0.87 and 0.84 for the TRG and the ypT stage, respectively. However, a few patients presented with peritumoral inflammatory reactions, which led to mispredictions. Exclusion of these patients further enhanced the predictive accuracy of PET imaging to AUCs of 0.97 and 0.89 for TRG and ypT, respectively.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The Percent of Positive Biopsy Cores Improves Prediction of Prostate Cancer-Specific Death in Patients Treated With Dose-Escalated Radiotherapy

Purpose: To examine the prognostic utility of the percentage of positive cores (PPC) at the time of prostate biopsy for patients treated with dose-escalated external beam radiation therapy. Methods and Materials: We performed a retrospective analysis of patients treated at University of Michigan Medical Center to at least 75 Gy. Patients were stratified according to PPC by quartile, and freedom from biochemical failure (nadir + 2 ng/mL), freedom from metastasis (FFM), cause-specific survival (CSS), and overall survival (OS) were assessed by log-rank test. Receiver operator characteristic (ROC) curve analysis was used to determine the optimal cut point for PPC stratification. Finally, Cox proportional hazards multivariate regression was used to assess the impact of PPC on clinical outcome when adjusting for National Comprehensive Cancer Network (NCCN) risk group and androgen deprivation therapy. Results: PPC information was available for 651 patients. Increasing-risk features including T stage, prostate-specific antigen, Gleason score, and NCCN risk group were all directly correlated with increasing PPC. On log-rank evaluation, all clinical endpoints, except for OS, were associated with PPC by quartile, with worse clinical outcomes as PPC increased, with the greatest impact seen in the highest quartile (>66.7% of cores positive). ROC curve analysis confirmed that a cut point using two-thirds positive cores was most closely associated with CSS (p = 0.002; area under ROC curve, 0.71). On univariate analysis, stratifying patients according to PPC less than or equal to 66.7% vs. PPC greater than 66.7% was prognostic for freedom from biochemical failure (p = 0.0001), FFM (p = 0.0002), and CSS (p = 0.0003) and marginally prognostic for OS (p = 0.055). On multivariate analysis, after adjustment for NCCN risk group and androgen deprivation therapy use, PPC greater than 66.7% increased the risk for biochemical failure (p = 0.0001; hazard ratio [HR], 2.1 [95% confidence interval (CI), 1.4-3.0]) and FFM (p = 0.05; HR, 1.7 [95% CI, 1.1-2.9]) and marginally increased the risk for CSS (p = 0.057; HR, 2.1 [95% CI, 1.0-4.6]). Conclusion: PPC at the time of biopsy adds prognostic value for clinically meaningful endpoints for patients treated with dose-escalated radiation therapy. This was particularly true for NCCN-defined intermediate- and high-risk patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A Comparative Study of the Hypoxia PET Tracers [{sup 18}F]HX4, [{sup 18}F]FAZA, and [{sup 18}F]FMISO in a Preclinical Tumor Model

Purpose: Several individual clinical and preclinical studies have shown the possibility of evaluating tumor hypoxia by using noninvasive positron emission tomography (PET). The current study compared 3 hypoxia PET tracers frequently used in the clinic, [{sup 18}F]FMISO, [{sup 18}F]FAZA, and [{sup 18}F]HX4, in a preclinical tumor model. Tracer uptake was evaluated for the optimal time point for imaging, tumor-to-blood ratios (TBR), spatial reproducibility, and sensitivity to oxygen modification. Methods and Materials: PET/computed tomography (CT) images of rhabdomyosarcoma R1-bearing WAG/Rij rats were acquired at multiple time points post injection (p.i.) with one of the hypoxia tracers. TBR values were calculated, and reproducibility was investigated by voxel-to-voxel analysis, represented as correlation coefficients (R) or Dice similarity coefficient of the high-uptake volume. Tumor oxygen modifications were induced by exposure to either carbogen/nicotinamide treatment or 7% oxygen breathing. Results: TBR was stabilized and maximal at 2 hours p.i. for [{sup 18}F]FAZA (4.0 ± 0.5) and at 3 hours p.i. for [{sup 18}F]HX4 (7.2 ± 0.7), whereas [{sup 18}F]FMISO showed a constant increasing TBR (9.0 ± 0.8 at 6 hours p.i.). High spatial reproducibility was observed by voxel-to-voxel comparisons and Dice similarity coefficient calculations on the 30% highest uptake volume for both [{sup 18}F]FMISO (R = 0.86; Dice coefficient = 0.76) and [{sup 18}F]HX4 (R = 0.76; Dice coefficient = 0.70), whereas [{sup 18}F]FAZA was less reproducible (R = 0.52; Dice coefficient = 0.49). Modifying the hypoxic fraction resulted in enhanced mean standardized uptake values for both [{sup 18}F]HX4 and [{sup 18}F]FAZA upon 7% oxygen breathing. Only [{sup 18}F]FMISO uptake was found to be reversible upon exposure to nicotinamide and carbogen. Conclusions: This study indicates that each tracer has its own strengths and, depending on the question to be answered, a different tracer can be put forward.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Study of formation mechanism of incipient melting in thixo-cast Al–Si–Cu–Mg alloys

Mechanical properties of thixo-cast Al–Si–Cu–Mg alloys can be enhanced by T61 heat treatment. Copper and magnesium atoms in aluminum matrix can form homogeneously distributed precipitations after solution and aging treatment which harden the alloys. However, microsegregation of these alloying elements could form numerous tiny multi-compound phases during solidification. These phases could cause incipient melting defects in subsequent heat treatment process and degrade the macro-mechanical properties of productions. This study is to present heterogeneous distribution of Cu, Si, and Mg elements and formation of incipient melting defects (pores). In this study, incipient melting pores that occurred during solution treatment at various temperatures, even lower than common melting points of various intermetallic phases, were identified, in terms of a method of investigating the same surface area in the samples before and after solution treatment in a vacuum environment. The results also show that the incipient melting mostly originates at the clusters with fine intermetallic particles while also some at the edge of block-like Al{sub 2}Cu. The fine particles were determined being Al{sub 2}Cu, Al{sub 5}Cu{sub 2}Mg{sub 8}Si{sub 6} and Al{sub 8}Mg{sub 3}FeSi{sub 2}. Tendency of the incipient melting decreases with decreases of the width of the clusters. The formation mechanism of incipient melting pores in solution treatment process was discussed using both the Fick law and the LSW theory. Finally, a criterion of solution treatment to avoid incipient melting pores for the thixo-cast alloys is proposed. - Highlights: • In-situ comparison technique was used to analysis the change of eutectic phases. • The ralationship between eutectic phase size and incipient melting was studied. • Teat treatment criterion for higher incipient melting resistance was proposed.

36 MATERIALS SCIENCE↗

Particle size effect of Ni-rich cathode materials on lithium ion battery performance

Graphical abstract: The preparation condition of Ni-rich cathode materials was investigated. When the retention time was short, a poor cathode performance was observed. For long retention time condition, cathode performance displayed a best result at pH 12. Highlights: Black-Right-Pointing-Pointer Ni-rich cathode materials (LiNi{sub 0.8}Co{sub 0.15}Al{sub 0.05}O{sub 2}) were prepared by co-precipitation method using separate addition of Al salt. Black-Right-Pointing-Pointer Particle size of Ni-rich cathode materials became larger with increase of retention time and solution pH. Black-Right-Pointing-Pointer Cathode performance was poor for low retention time. Black-Right-Pointing-Pointer Optimal pH for co-precipitation was 12. -- Abstract: Herein, Ni-rich cathode materials (LiNi{sub 0.8}Co{sub 0.15}Al{sub 0.05}O{sub 2}) in lithium ion batteries are prepared by a separate addition of Ni/Co salt and Al sol solution using a continuously stirred tank reactor. Retention time and solution pH were controlled in order to obtain high performance cathode material. Particle size increase was observed with a higher retention time of the reactants. Also, primary and secondary particles became smaller according to an increase of solution pH, which was probably due to a decrease of growth rate. From the cathode application, a high discharge capacity (175 mAh g{sup -1}), a high initial efficiency (90%) and a good cycleability were observed in the cathode material prepared under pH 12 condition, which was attributed to its well-developed layered property and the optimal particle size. However, rate capability was inversely proportional to the particle size, which was clarified by a decrease of charge-transfer resistance measured in the electrochemical impedance spectroscopy.

36 MATERIALS SCIENCE↗

M11plus: A Range-Separated Hybrid Meta Functional with Both Local and Rung-3.5 Correlation Terms and High Across-the-Board Accuracy for Chemical Applications

The way to improve Kohn–Sham density functional theory is to improve the exchange–correlation functionals, and functionals have been successively improved by adding new ingredients, especially local spin density gradients, nonlocal Hartree–Fock exchange, and local meta terms based on kinetic energy density. Here, we present a new kind of functional obtained by adding rung-3.5 terms to a functional including local gradients, local meta terms, and range-separated Hartree–Fock exchange. A rung-3.5 term has short-range nonlocality designed to account for nondynamic correlation; we add two kinds of rung-3.5 terms, one kind modeled on position-dependent Hartree–Fock exchange and another modeled on the spin density at a point interacting with the opposite-spin exchange hole at the same point. Here, optimization of the functional yields broad accuracy for both ground states and excited states with especially significant improvement for systems with strong correlation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate Binding Energies for Lithium Polysulfides and Assessment of Density Functionals for Lithium–Sulfur Battery Research

Lithium–sulfur batteries have high theoretical energy density, but a better knowledge of their intimate structural details will be helpful in improving their conductivity and long-term cycling behavior. In order to identify the stationary configurations of lithium polysulfides (Li 2 S n , 2 ≤ n ≤ 8) formed in the charging and discharging processes of the lithium–sulfur batteries, ab initio molecular dynamics was employed to sample the configuration space of Li 2 S n , followed by optimization of structures by CCSD(T)-F12b/aug-cc-pVDZ. Here, using the optimized stationary points, we have created the LiSAE38 benchmark database of atomization energies (AEs) of 38 lithium polysulfide isomers by using the higher-level WMS and W3X-L methods. In addition, the performances of 39 density functionals have been assessed against the benchmark AEs and the relative stabilities of Li 2 S n isomers. On the basis of the assessments with the def2-QZVP basis set, the PW6B95, B97-1, B3LYP-D3, TPSS, and DSD-PBEP86 density functionals are the most accurate for the AEs, whereas the mPW2-PLYP-D, DSD-PBEP86, PW6B95, HSE06, and PBEQIDH functionals are most accurate for the relative energies. Local functionals are of special interest because of their lower cost (faster timings in terms of computer resources) for large systems; among the tested local functionals, MN15-L and revM06-L are the most accurate for the calculations of relative stabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Iodine’s Wild Ride Leading to Photoinstability in Halide Perovskite Solar Cells

Understanding processes that contribute to efficiency losses during long-term operation of perovskite solar cells is crucial for achieving operational stability. Although maximum power point tracking optimizes outdoor performance, it is not uncommon that devices are kept under open-circuit conditions during sunny hours. Under these conditions, charge carriers accumulate at the interfaces rather than flowing through the circuit. In the case of the MAPbI 3 /spiro-OMeTAD interface studied here, hole accumulation leads to formation of I2 and subsequent oxidation of spiro-OMeTAD. By employing in situ absorption measurements, we show that the decrease in power conversion efficiency follows the spiro-OMeTAD oxidation while operating the device under open-circuit conditions. In short-circuit conditions, where photogenerated charge carriers are extracted in the external circuit, the I 2 -induced oxidation of spiro-OMeTAD and the device instability are minimized. The photoinduced expulsion of iodine from MAPbI 3 into spiro-OMeTAD discussed in this work provides new insight into the photoinstability of perovskite solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequence-based generative AI design of versatile tryptophan synthases

Enzymes are powerful and sustainable catalysts, but their widespread application is limited by the difficulty of identifying functional starting points for optimization, creating a major bottleneck in early- stage biocatalyst discovery. Designing libraries of such starting enzymes remains particularly challenging. Here, we use the GenSLM protein language model to generate novel β-subunit of tryptophan synthase (TrpB) enzymes that express in Escherichia coli and are both stable and catalytically active. Many generated TrpBs also display significant substrate promiscuity, outperforming their natural counterparts on non-native substrates. Some even surpass laboratory-evolved TrpBs. Comparison of the most-active and most-promiscuous generated TrpB to its closest natural homolog confirms that the enhanced versatility is absent from the natural enzyme, highlighting the creative potential of generative models. These results demonstrate that the generated TrpBs not only preserve natural structure and function but also acquire non-natural properties, establishing generative models as powerful tools for biocatalyst discovery and engineering.

biocatalysis↗

Discovery of hydrogen storage molecules using large language models and machine learning

Accelerating the discovery of new molecules with targeted properties is a central challenge in molecular design. In this contribution, we present an AI-driven molecular discovery framework that integrates Large Language Models (LLMs) for generative molecular design with Machine Learning (ML)-based screening to identify novel Liquid Organic Hydrogen Carrier (LOHC) candidates. Using the developed framework, LOHC molecules were systematically generated, evaluated, and refined iteratively, combining LLM-guided molecular generation and ML-predicted hydrogenation enthalpies (Δ H ), under physicochemical property constraints such as optimal melting points (MP), desired hydrogen storage capacity (wt% H 2 ), and synthetic accessibility (SA) scores. This approach enabled the discovery of 42 new LOHC candidates in two distinct campaigns, one seeded with experimentally known and another with previously computationally identified LOHCs, respectively. Although we began with different numbers of starting molecules (31 vs . 7 seed molecules), both runs yielded a comparable number of viable candidates, suggesting an influence of chemically intuitive seed molecule selection for success. Selected LOHC molecules, such as 3-methyl pyridine, 1-ethylnapthalene, 1,1-diphenylethane, and benzofuran, were experimentally tested and compared with benchmark LOHCs (toluene and 9-ethylcarbazole) for hydrogenation using a series of commercial supported metal catalysts. The order of conversion into fully hydrogenated products at 200 °C was 3-methyl pyridine (100%) > 9-ethyl carbazole (86.4%) > 2,3-benzofuran (74%) > 1,1-diphenylethane (66.9%) > 1-ethylnapthalene (66.7%) > toluene (57%), further validating the AI-guided molecular design. This study demonstrates promise of LLM-driven molecular design in conjunction with ML-based screening for accelerated discovery and design of molecules.

Harb, Hassan [Argonne National Laboratory (ANL), A↗

Planck 2013 results. XVIII. The gravitational lensing-infrared background correlation

The multi-frequency capability of the Planck satellite provides information both on the integrated history of star formation (via the cosmic infrared background, or CIB) and on the distribution of dark matter (via the lensing effect on the cosmic microwave background, or CMB). The conjunction of these two unique probes allows us to measure directly the connection between dark and luminous matter in the high redshift (1 ≤ z ≤ 3) Universe. We use a three-point statistic optimized to detect the correlation between these two tracers. Following a thorough discussion of possible contaminants and a suite of consistency tests, using lens reconstructions at 100, 143 and 217 GHz and CIB measurements at 100–857 GHz, we report the first detection of the correlation between the CIB and CMB lensing. The well matched redshift distribution of these two signals leads to a detection significance with a peak value of 42/19σ at 545 GHz and a correlation as high as 80% across these two tracers. Our full set of multi-frequency measurements (both CIB auto- and CIB-lensing cross-spectra) are consistent with a simple halo-based model, with a characteristic mass scale for the halos hosting CIB sources of log 10 ( M/M ⊙ ) = 10.5 ± 0.6. Leveraging the frequency dependence of our signal, we isolate the high redshift contribution to the CIB, and constrain the star formation rate (SFR) density at z ≥ 1. Here, we measure directly the SFR density with around 2σ significance for three redshift bins between z = 1 and 7, thus opening a new window into the study of the formation of stars at early times.

79 ASTRONOMY AND ASTROPHYSICS↗