Search NASA⌕ Search

SEARCH · Search NASA

Results for “Point containment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Application of two-point difference schemes to the conservative Euler equations for one-dimensional flows

An implicit finite difference method is presented for obtaining steady state solutions to the time dependent, conservative Euler equations for flows containing shocks. The method used the two-point differencing approach of Keller with dissipation added at supersonic points via the retarded density concept. Application of the method to the one-dimensional nozzle flow equations for various combinations of subsonic and supersonic boundary conditions shows the method to be very efficient. Residuals are typically reduced to machine zero in approximately 35 time steps for 50 mesh points. It is shown that the scheme offers certain advantages over the more widely used three-point schemes, especially in regard to application of boundary conditions.

Wornom, S. F.↗
DOE OSTI2024

Optimization of lithium vapor box divertor evaporator location on NSTX-U using SOLPS-ITER

Commercial fusion reactors will be faced with extremely high divertor target heat fluxes that will require mitigation. Simulations of detachment in an NSTX-U scenario projected to have 92 MW/m 2 unmitigated peak target heat flux are presented, which reaches sub-10 MW/m 2 target heat flux using a highly dissipating lithium vapor box divertor design. The lithium vapor box is a detached divertor design which employs lithium vapor evaporation and condensation to contain lithium below the X-point. Previous SOLPS modeling has indicated a lithium vapor box can reduce the heat flux down to 10 MW/m 2 via simultaneous evaporation from the Private Flux Region (PFR) and the Common Flux Region (CFR) sides of the vapor box. It is found here that PFR evaporation has improved access to the separatrix leading to significantly more efficient power dissipation than CFR evaporation. Simulations of target evaporation with an evaporation distribution that is self-consistent with the temperature of a Capillary Porous System with Fast flowing liquid lithium (CPSF) could reach n Li / n e ~ 0.025-0.030 at the Last Closed Flux Surface (LCFS) depending on the liquid metal flow speeds and lithium sputtering yield, while PFR-side evaporation can reach acceptable heat fluxes with n Li / n e ~ 0.038 at the LCFS. However, PFR evaporator performance can be improved if the target is allowed to be hot enough such that it reflects lithium, reaching n Li / n e ~ 0.028 and reducing required lithium evaporation. Ultimately PFR evaporation and target evaporation are found to have similar ability to produce acceptable heat flux solutions with minimal upstream concentration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Existing Hydropower Assets (EHA) Puerto Rico Plant Database Extension

This dataset is an extension and subset of the Existing Hydropower Assets (EHA) Plant Database, 2025, released by Oak Ridge National Laboratory through HydroSource covering hydropower plants in Puerto Rico. The extension enhanced EHA to support modeling performed under the Department of Energy Hydropower Office's SECURE Water Act Section 9505 Fourth Assessment (9505). Included is a spatial dataset containing the location of the powerhouse and plant characteristics and a spatial dataset containing the location of the point-of-diversion and plant characteristics. Enhancements made in this dataset from EHA include updating plant’s spatial locations to explicitly represent the location of the powerhouse; identifying a plant’s point-of-diversion (source of water) spatial location; adding additional plants not included in the 2025 EHA, and revising attributes with updated information.

Broman, Daniel P [Pacific Northwest National Labor↗
DOE OSTI2026

Existing Hydropower Assets (EHA) Hawaii Plant Database Extension

This dataset is an extension and subset of the Existing Hydropower Assets (EHA) Plant Database, 2025, released by Oak Ridge National Laboratory through HydroSource covering hydropower plants in Hawaii. The extension enhanced EHA to support modeling performed under the Department of Energy Hydropower Office's SECURE Water Act Section 9505 Fourth Assessment (9505). Included is a spatial dataset containing the location of the powerhouse and plant characteristics and a spatial dataset containing the location of the point-of-diversion and plant characteristics. Enhancements made in this dataset from EHA include updating plant’s spatial locations to explicitly represent the location of the powerhouse; identifying a plant’s point-of-diversion (source of water) spatial location; adding Intertie Region as and attributes, and revising the County, Pt_Own, OwType, and Dam_Own attributes with updated information.

Broman, Daniel P [Pacific Northwest National Labor↗
DOE OSTI2026

Existing Hydropower Assets (EHA) Alaska Plant Database Extension

This dataset is an extension and subset of the Existing Hydropower Assets (EHA) Plant Database, 2025, released by Oak Ridge National Laboratory through HydroSource covering hydropower plants in Alaska. The extension enhanced EHA to support modeling performed under the Department of Energy Hydropower Office's SECURE Water Act Section 9505 Fourth Assessment (9505). Included is a spatial dataset containing the location of the powerhouse and plant characteristics and a spatial dataset containing the location of the point-of-diversion and plant characteristics. Enhancements made in this dataset from EHA include updating plant’s spatial locations to explicitly represent the location of the powerhouse; identifying a plant’s point-of-diversion (source of water) spatial location; adding State of Alaska Plant ID, Intertie Region, and Alaska Energy Region as attributes, and revising the County, Pt_Own, OwType, and Dam_Own attributes with updated information.

Broman, Daniel P [Pacific Northwest National Labor↗
NASA NTRS1967

Computer program simplifies design of rotating components of turbomachinery

Digital computer program performs stress analysis and burst speed calculations on rotating axisymmetric turbomachinery components. The computer printout contains the displacement of each nodal point, the stress at the center of each element, the average tangential stress within the component, and the burst speed.

Lefevre, J. C.↗
NASA NTRS1971

Hydrogen slush density reference system

A hydrogen slush density reference system was designed for calibration of field-type instruments and/or transfer standards. The device is based on the buoyancy principle of Archimedes. The solids are weighed in a low-mass container so arranged that solids and container are buoyed by triple-point liquid hydrogen during the weighing process. Several types of hydrogen slush density transducers were developed and tested for possible use as transfer standards. The most successful transducers found were those which depend on change in dielectric constant, after which the Clausius-Mossotti function is used to relate dielectric constant and density.

Weitzel, D. H.↗
NASA NTRS1973

Two concepts for the reduction of payload attitude slewing times.

The concepts presented are particularly valuable in sounding rocket applications, where experiment data-gathering time above the atmosphere is measured in minutes per flight. One concept is a practical nonlinear control law for slewing a payload in one axis, with performance that approaches time-optimal as the uncertainty in angular acceleration approaches zero. The second concept is a practical transformation-of-coordinates system allowing slewing about an axis not coincident with any of the three control axes of the payload, so that the payload experiment axis may move along the great circle arc containing the initial and terminal target points. Implementation of both concepts is facilitated by the availability of variable-thrust cold-gas thrustors. Both concepts can result in significant reductions in slewing times compared with more conventional systems.

Riley, D. C.↗
NASA NTRS1974

MSFC Skylab Apollo Telescope Mount thermal control system mission evaluation

The Skylab Saturn Workshop Assembly was designed to expand the knowledge of manned earth orbital operations and accomplish a multitude of scientific experiments. The Apollo Telescope Mount (ATM), a module of the Skylab Saturn Workshop Assembly, was the first manned solar observatory to successfully observe, monitor, and record the structure and behavior of the sun outside the earth's atmosphere. The ATM contained eight solar telescopes that recorded solar phenomena in X-ray, ultraviolet, white light, and hydrogen alpha regions of the electromagnetic spectrum. In addition, the ATM contained the Saturn Workshop Assembly's pointing and attitude control system, a data and communication system, and a solar array/rechargeable battery power system. This document presents the overall ATM thermal design philosophy, premission and mission support activity, and the mission thermal evaluation. Emphasis is placed on premission planning and orbital performance with particular attention on problems encountered during the mission. ATM thermal performance was satisfactory throughout the mission. Although several anomalies occurred, no failure was directly attributable to a deficiency in the thermal design.

Hueter, U.↗
NASA NTRS1974

Infrared stars in binary systems

The peculiar F-type supergiant HD 101584, which has a large and unusual infrared excess, is discussed along with the possibility that the infrared radiation could be accounted for by a cool companion. The peculiar F supergiants 89 Her, v Sgr, and R CrB are also considered as possible binary systems containing an infrared star. It is pointed out that all four of these stars have infrared excesses with characteristics similar to the infrared radiation from several cool objects which are known single stars.

Humphreys, R. M.↗
NASA NTRS1974

Geometrically constrained observability

This paper deals with observed processes in situations in which observations are available only when the state vector lies in certain regions. For linear autonomous observed processes, necessary and sufficient conditions are obtained for half-space observation regions. These results are shown to contain a theorem dual to a controllability result proved by the author for a linear autonomous control system whose control restraint set does not contain the origin as an interior point. Observability results relating to continuous observation systems and sampled data systems are presented, and an example of observing the state of an electrical network is given.

Brammer, R. F.↗
NASA NTRS1978

A new color correlation method applied to XRF Al/Si ratios and other lunar remote sensing data

Orbital X-ray fluorescence Al/Si intensity ratios, corrected for variations in solar activity, are correlated with normal albedo, elevation measurements from laser altimetry data, and gamma ray data in the 2.75-8.60 MeV range. Each of these data sets is placed into a digital array consisting of 1/4 deg latitude by 1/4 deg longitude pixels. Information relative to the correlation of Al/Si ratios with each of the other data sets is presented in the following forms: (1) histograms are given for each data set to show the frequency distribution within the areas of common coverage; (2) density plots are produced from the plot of a two-dimensional array consisting of the Al/Si ratio vs the other parameter value for each pixel; and (3) color correlation maps are produced by placing the two-dimensional array into a 3 x 3 matrix consisting of nine equal subarrays containing an equal number of data points.

Clark, P. E.↗
NASA NTRS1982

Atmospheric ozone determination by solar occultation using the UV spectrometer on the Solar Maximum Mission

The UV spectrometer polarimeter instrument on the Solar Maximum Mission spacecraft has been used to measure ozone in the 53-75 km altitude interval by the technique of solar occultation. A 1 x 180 arcsec entrance aperture spectrometer with 0.04-A spectral resolution was employed. Resulting high-quality data are reduced by expressing measured UV attenuation as a Volterra integral equation. Solution of the equation is accomplished by expressing the integral in terms of a series representing the sum of ozone densities contained in concentric shells through tangent points separated by specified altitude increments. Sample ozone vs altitude profiles are presented for the equatorial region. These data show reproducibility to better than 10%. The density at 60 km is 7.3 + or - 0.15 x 10 to the 9th/cu cm for 2.5 deg latitude and longitudes between 81 and 105 deg west in September 1980. Density vs altitude profile exhibits changes in slope between 50 and 75 km.

Aikin, A. C.↗
NASA NTRS1982

Robustness of adaptive control algorithms in the presence of unmodeled dynamics

This paper reports the outcome of an exhaustive analytical and numerical investigation of stability and robustness properties of a wide class of adaptive control algorithms in the presence of unmodeled dynamics and output disturbances. The class of adaptive algorithms considered are those commonly referred to as model-reference adaptive control algorithms, self-tuning controllers, and dead-beat adaptive controllers; they have been developed for both continuous-time systems and discrete-time systems. The existing adaptive control algorithms have been proven to be globally asymptotically stable under certain assumptions, the key ones being (1) that the number of poles and zeroes of the unknown plant are known, and (2) that the primary performance criterion is related to good command following. These theoretical assumptions are too restrictive from an engineering point of view. Real plants always contain unmodeled high-frequency dynamics and small delays, and hence no upper bound on the number of the plant poles and zeroes exists. Also real plants are always subject to unmeasurable output additive disturbances, although these may be guide small. Hence, it is important to critically examine the stability robustness properties of the existing adaptive algorithms when some of the theoretical assumptions are removed; in particular, their stability and performance properties in the presence of unmodeled dynamics and output disturbances. Previously announced in STAR as N83-16061

Rohrs, C. E.↗
NASA NTRS1987

An analytic study of the Charney problem on the sphere

An analytic study of the Charney (1947) problem is presented, in which a shortwave approximation and a two-scale assumption are adopted to derive approximate solutions for the problem. The solutions contain a second-order turning point whose location is important in determining the properties of baroclinic unstable waves. This turning point is located at the maximum of the meridional temperature gradient. The solutions indicate a close relation between baroclinic instability on the sphere and on a Beta-plane. The solutions have some limitations and are not valid for long waves. It is suggested that the solutions have implications for parameterizations of eddy fluxes in climate modeling.

Lee, Yung-An↗
NASA NTRS1990

Finite-element models of continental extension

Numerical models of the initial deformation of extending continental lithosphere, computed to investigate the control of preexisting thermal and mechanical heterogeneities on the style of deformation, are presented. The finite element method is used to calculate deformation with a viscoelastic-plastic model for the lithosphere. Comparisons of the results of analytic models and finite-element models using this method show that good results may be obtained by the numerical technique, even with elements containing both brittle and viscoelastic sampling points. It is shown that the gross style of initial extensional deformation is controlled by the depth and width of the initial heterogeneity which localizes deformation.

Lynch, H. David↗
NASA NTRS1972

Practical applications of digital integrated circuits. Part 2: Minimization techniques, code conversion, flip-flops, and asynchronous circuits

Here, the 7400 line of transistor to transistor logic (TTL) devices is emphasized almost exclusively where hardware is concerned. However, it should be pointed out that the logic theory contained herein applies to all hardware. Binary numbers, simplification of logic circuits, code conversion circuits, basic flip-flop theory, details about series 54/7400, and asynchronous circuits are discussed.

Source record↗
NASA NTRS1993

Radiation hardened microprocessor for small payloads

The RH-3000 program is developing a rad-hard space qualified 32-bit MIPS R-3000 RISC processor under the Naval Research Lab sponsorship. In addition, under IR&D Harris is developing RHC-3000 for embedded control applications where low cost and radiation tolerance are primary concerns. The development program leverages heavily from commercial development of the MIPS R-3000. The commercial R-3000 has a large installed user base and several foundry partners are currently producing a wide variety of R-3000 derivative products. One of the MIPS derivative products, the LR33000 from LSI Logic, was used as the basis for the design of the RH-3000 chipset. The RH-3000 chipset consists of three core chips and two support chips. The core chips include the CPU, which is the R-3000 integer unit and the FPA/MD chip pair, which performs the R-3010 floating point functions. The two support whips contain all the support functions required for fault tolerance support, real-time support, memory management, timers, and other functions. The Harris development effort had first passed silicon success in June, 1992 with the first rad-hard 32-bit RH-3000 CPU chip. The CPU device is 30 kgates, has a 508 mil by 503 mil die size and is fabricated at Harris Semiconductor on the rad-hard CMOS Silicon on Sapphire (SOS) process. The CPU device successfully passed tesing against 600,000 test vectors derived directly on the LSI/MIPS test suite and has been operational as a single board computer running C code for the past year. In addition, the RH-3000 program has developed the methodology for converting commercially developed designs utilizing logic synthesis techniques based on a combination of VHDK and schematic data bases.

Shah, Ravi↗