SEARCH · Search NASA

Results for “Precipitation Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Be-Cu precipitation hardening experiment

The following is a laboratory experiment designed to further a student's understanding of materials science. The student performing this experiment should have a knowledge of binary phase diagrams. The objectives of this experiment are as follows: (1) to give the student a hands-on approach to changing materials properties through heat treatment of a specimen; (2) to quantify the amount of strengthening obtained in the specimen; and (3) to encourage the student to speculate about the structural changes that have occurred in the material to cause the changes in strength.

Cowan, Richard L.↗

DOE OSTI2024

Quantifying the Turbulent Entrainment‐Mixing Processes Based on Z ‐LWC Relationships of Cloud Droplets

Abstract Turbulent entrainment‐mixing processes profoundly influence the relationship between radar reflectivity factor and liquid water content ( Z ‐LWC) of cloud droplets. However, quantification of the entrainment‐mixing mechanisms based on the Z ‐LWC relationship is still lacking. To address this gap, 12,218 entrainment‐mixing cases are simulated using the Explicit Mixing Parcel Model. We examine the variations of the parameters in the power‐law relationship Z = a LWC b , and the relationship between parameter b and homogeneous mixing degree ( ψ ), a measure quantifying entrainment‐mixing processes. The results indicate that parameter b distributes within the range of 1–2, with a positive correlation between parameter b and ψ . The b ‐ ψ relationship is fitted, which connects the Z ‐LWC relationship for various entrainment‐mixing types. The results suggest the potential for employing a remote sensing approach to investigate the entrainment‐mixing mechanisms of non‐precipitating small cumulus/stratocumulus clouds, thereby overcoming the limitations of traditional observational studies that rely solely on aircraft observations.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Co-, Ni- and Fe-rich grain-boundary phases enhance creep resistance in θ'-strengthened Al-Cu alloys

Here, microstructural evolution and creep response were investigated in the cast Al-5.0Cu-0.3Mn-0.2Zr (wt.%) alloy with and without addition of slow-diffusing, intermetallic-forming elements Fe, Ni, or Co. Baseline Al-5.0Cu-0.3Mn-0.2Zr alloy exhibits high creep resistance at 300 °C, up to ~75 MPa, which is attributed to high-aspect-ratio, intragranular θ'-Al 2 Cu precipitates that effectively suppress dislocation climb. However, θ'-Al 2 Cu precipitate-free zones form along grain boundaries upon heat treatment, whose extent is amplified during subsequent creep. Such weak regions experience dislocation creep, leading to strain localization and acceleration of grain-boundary sliding. Adding Ni and Co, individually or in combination, leads to the formation of grain-boundary precipitates (Al 9 Co 2 , Al 3 Ni 2 ) which are resistant to coarsening, thus suppressing the formation of θ'-Al 2 Cu precipitate-free zones. This microstructure provides high creep resistance at stresses up to 75–80 MPa, with strain rates much lower than in unmodified Al-5.0Cu-0.3Mn-0.2Zr. Adding Fe, which results in extensive decoration of grain boundaries with coarsening-resistant Al 7 Cu 2 Fe, and then increasing the Cu content to compensate for the Cu loss to this new phase, leads to a new Al-7.4Cu-1.6Fe-0.3Mn-0.2Zr alloy with creep resistance at 300 °C that surpasses known cast aluminum alloys. Adding Fe to improve the creep resistance of Al-Cu alloys is both cost-effective and sustainable. Our findings offer guidelines applicable to various alloy systems on controlling the evolution of precipitate-free zones and its ensuing effects on creep deformation.

36 MATERIALS SCIENCE↗

DOE OSTI2025

A Unified Interpretation of Variability in Precipitation Isotope Ratios

Abstract Several mechanisms have been proposed to explain why the isotope ratios of precipitation vary in space and time and why they correlate with other climate variables like temperature and precipitation. Here, we argue that this behavior is best understood through the lens of radiative transfer, which treats the depletion of atmospheric vapor transport by precipitation as analogous to the attenuation of light by absorption or scattering. Building on earlier work by Siler et al., we introduce a simple model that uses the equations of radiative transfer to approximate the two-dimensional pattern of the oxygen isotope composition of precipitation ( δ p ) from monthly mean hydrologic variables. The model accurately simulates the spatial and seasonal variability in δ p within a state-of-the-art climate model and permits a simple decomposition of δ p variability into contributions from gradients in evaporation and the length scale of vapor transport. Outside the tropics, δ p is mostly controlled by gradients in evaporation, whose dependence on temperature explains the positive correlation between δ p and temperature (i.e., the temperature effect). At low latitudes, δ p is mostly controlled by gradients in the transport length scale, whose inverse relationship with precipitation explains the negative correlation between δ p and precipitation (i.e., the amount effect). This suggests that the temperature and amount effects are both mostly explained by the variability in upstream rainout, but they reflect distinct mechanisms governing rainout at different latitudes. Significance Statement The isotopic composition of precipitation has long been used to make inferences about past climates based on its observed relationship with precipitation in the tropics and with temperature at higher latitudes. These relationships—known as the “amount effect” and “temperature effect,” respectively—have been attributed to many different mechanisms, most of which are thought to operate at either high or low latitudes but not both. Here, we present a unified framework for interpreting the isotope variability that can explain the latitude dependence of the temperature and amount effects despite making no distinction between high and low latitudes. Although our results are generally consistent with certain interpretations of the amount effect, they suggest that the temperature effect is widely misunderstood.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Automated point dendrometer, soil moisture and temperature, and meteorological variables datasets, Oct 2024 – Nov 2025, G.A. Pearson Natural Area, Flagstaff, AZ, USA

This data package includes parsed, cleaned, and calibrated data from 48 TOMST automated point dendrometers, 48 TOMST 15 cm soil moisture sensors, and 12 TOMST 30 cm soil moisture sensors. The point dendrometers were cleaned with the “dendRoAnalyst” package in RStudio. The soil sensors were cleaned and calibrated for volumetric water content (VWC) with the “myClim” package in RStudio using the soil texture of the site (sandy clay loam). Additionally, this data package also includes raw data from 2 METER weather stations. Dendrometers and soil sensors have both their sensor ID, as well as the ID for the specific tree they were instrumented on at the G.A. Pearson Natural Area (GPNA) site and their experimental group. The purpose of these data is to understand how ponderosa pine trees in restored (thinned and burned) vs. unrestored (no treatment) areas are responding to drought and seasonal precipitation. These data use radial growth and soil moisture data to answer the following question: how are active season length, growth on different time scales (weekly, monthly, seasonally, and annually), growth during dry periods and after precipitation events, and environmental and biological drivers of radial growth different between restored versus unrestored areas?

Air temperature↗

NASA NTRS1979

Some aspects of hydrology in the GLAS GCM

The response of hydrology in the Laboratory for Atmospheric Sciences General Circulation Model is evaluated. The results show that the distribution of precipitation agrees fairly well with observations of precipitation and that the model and that the model tends to maintain the hydrological balance.

Godbole, R.↗

NASA NTRS2008

Global Precipitation Measurement

This chapter begins with a brief history and background of microwave precipitation sensors, with a discussion of the sensitivity of both passive and active instruments, to trace the evolution of satellite-based rainfall techniques from an era of inference to an era of physical measurement. Next, the highly successful Tropical Rainfall Measuring Mission will be described, followed by the goals and plans for the Global Precipitation Measurement (GPM) Mission and the status of precipitation retrieval algorithm development. The chapter concludes with a summary of the need for space-based precipitation measurement, current technological capabilities, near-term algorithm advancements and anticipated new sciences and societal benefits in the GPM era.

Hou, Arthur Y.↗

NASA NTRS2008

Total Lightning Observations of Extreme Weather Events over the Contiguous United States

The overall objective is to investigate total lightning characteristics of extreme weather events over the contiguous United States (CONUS) using TRMM (Tropical Rainfall Measuring Mission) LIS (Lightning Image Sensor) and OTD (Optical Transient Detector) satellite observations. A large LIS (10+ years) and OTD (5 years) data base is available to study the instantaneous total or cloud-to-ground (CG) plus intracloud (IC) lightning characteristics of extreme weather events. More specifically, the LIS and OTD data are combined with National Lightning Detection Network (NLDN) observations to examine the total and CG lightning flash rate and density, the IC:CG ratio, and positive CG percentage. These instantaneous lightning characteristics can be used for basic science studies to better understand the physical and dynamical linkages between lightning and precipitation and their environmental controls. They can also provide a first-look of extreme weather events leading up to future satellite observations (e.g., NOAA GOES-R Geostationary Lightning Mapper [GLM]) for use in climate studies and the short-term prediction and warning process. Extreme weather events are defined by the NOAA Storm Data reports of tornadoes, large hail (at least 0.75 inch) and strong straight-line winds (at least 50 kts). Over CONUS, there are over 70,000 severe storm reports in the TRMM spatial domain (< 35 N) from 1998-2007 and over 100,000 storm reports in the OTD spatial domain (5/1995-4/2000). Temporal co-location is on the order of 1% (i.e., 1000 s of coincident overpasses), providing a statistically significant sample of instantaneous total lightning properties. This instantaneous behavior of lightning in extreme weather is then compared to that of typical thunderstorm events, or randomly sampled LIS/OTD events in which the extreme events have been eliminated from the population. Results describing the instantaneous behavior of total lightning within a large sample of extreme and typical thunderstorms over CONUS will be presented. When possible, coincident VHF lightning observations from the ground-based Northern Alabama Lightning Mapping Array (LMA) are compared to the LIS/OTD optical lightning signatures, providing a validation source for instantaneous space-based optical lightning properties and a means to extend lightning inferences over the life-cycle of extreme weather.

Carey, Lawrence D.↗

NASA NTRS2021

Trend Detection of Atmospheric Time Series: Incorporating Appropriate Uncertainty Estimates and Handling Extreme Events

This paper is aimed at atmospheric scientists without formal training in statistical theory. Its goal is to, 1) provide a critical review of the rationale for trend analysis of the time series typically encountered in the field of atmospheric chemistry; 2) describe a range of trend-detection methods; and 3) demonstrate effective means of conveying the results to a general audience. Trend detections in atmospheric chemical composition data are often challenged by a variety of sources of uncertainty, which often behave differently to other environmental phenomena such as temperature, precipitation rate, or stream flow, and may require specific methods depending on the science questions to be addressed. Some sources of uncertainty can be explicitly included in the model specification, such as autocorrelation and seasonality, but some inherent uncertainties are difficult to quantify, such as data heterogeneity and measurement uncertainty due to the combined effect of short- and long-term natural variability, instrumental stability, and aggregation of data from sparse sampling frequency. Failure to account for these uncertainties might result in an inappropriate inference of the trends and their estimation errors. On the other hand, the variation in extreme events might be interesting for different scientific questions, for example, the frequency of extremely high surface ozone events and their relevance to human health. In this study we aim to, 1) review trend detection methods for addressing different levels of data complexity in different chemical species; 2) demonstrate that the incorporation of scientifically interpretable covariates can outperform pure numerical curve fitting techniques in terms of uncertainty reduction and improved predictability; 3) illustrate the study of trends based on extreme quantiles that can provide insight beyond standard mean or median based trend estimates; and 4) present an advanced method of quantifying regional trends based on the inter-site correlations of multi-site data. All demonstrations are based on time series of observed trace gases relevant to atmospheric chemistry, but the methods can be applied to other environmental data sets.

Trace gas↗

DOE OSTI2026

Microstructural evolution, defect mitigation, and precipitation behavior in AA6061 via laser powder bed fusion with high-temperature substrate heating

Defects, particularly solidification cracking, remain persistent challenges in the laser powder bed fusion (LPBF) processing of AA6061 aluminum alloy. This study systematically investigates defect mitigation, microstructural evolution, and mechanical properties associated with high-temperature substrate preheating at 500 °C. Comprehensive microstructural analyses, including characterization of defects, grain structures, and precipitation behavior, were performed on samples in both as-built and T6 heat-treated states. Elevated preheating substantially reduced solidification cracking across a wide processing window, while demonstrating decreased crack sensitivity to laser parameters. Columnar cracks along the build direction were observed despite substrate preheating. Lack-of-fusion and keyhole porosity were effectively eliminated, though gas-induced microporosity persisted at higher powers. In-depth characterization of two distinct laser power and speed conditions confirmed the formation of micron-sized, non-coherent Mg 2 Si precipitates under heated substrate conditions, alongside α-AlFeCrMnSi intermetallic phases indicative of in-situ thermal effects during fabrication. Subsequent T6 heat treatment revealed the formation of fine, coherent needle-shaped β″ strengthening precipitates. Despite substantial differences in processing parameters, comparable mechanical properties were measured in the as-built samples (∼52 MPa yield strength, ∼130 MPa tensile strength), primarily due to reduced strain hardening effects and consistent precipitation characteristics. Meanwhile, the T6 heat treatment led to significant improvement in properties, enhancing yield strength by over 400%, aligning closely with the performance of conventional wrought AA6061-T6. These findings underscore that high-temperature substrate preheating offers an effective means to suppress cracks, control precipitation, and enhance mechanical performance in LPBF-processed AA6061.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Co-Occurring Atmospheric Features and Their Contributions to Precipitation Extremes

Object-based identification algorithms for atmospheric features are commonly utilized to attribute global precipitation. This study employs a systematic approach to examine feature co-occurrences and their relationships to mean and extreme precipitation. Four features are identified using existing data sets for atmospheric rivers (ARs), mesoscale convective systems (MCSs), low-pressure systems (LPSs), and fronts (FTs). Often, a single atmospheric phenomenon satisfies the criteria set by multiple feature identification algorithms, yielding an association between precipitation and multiple features. Over the extra-tropics, the number of features attributed to a single event typically increases with precipitation intensity. Over two-thirds of the precipitation is from co-occurring features, with a considerable fraction related to AR-FT co-occurrences. Over the tropics, about one-quarter of precipitation is associated with co-occurring features, with LPS-MCS co-occurrences contributing substantially in monsoon regions. MCSs are the leading single-feature contributors over tropical land and oceans. In the extra-tropics, FTs, ARs, and their co-occurrences account for over half of the total precipitation over oceans. AR-FT-MCS and FT-MCS co-occurrences contribute to extremes (precipitation exceeding the 95th percentile) over both oceans (over 30%) and land (over 20%). Any combination of features involving MCSs shows a larger contribution to high percentiles of precipitation intensity. A case analysis indicates that AR-FT-MCS co-occurrences exhibit convective instability and deep vertical motion, suggesting that the feature trackers and reanalysis are capturing physics relevant to both convective and frontal systems. The results here emphasize the need for simultaneous identifications of multiple features when attributing precipitation to atmospheric phenomena.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Relationships Between Mesoscale Convective System Properties and Midlevel Dynamic Perturbations

Abstract Past studies implicate dynamic anomalies operating on subsynoptic scales as a possible initiation source of summertime (July–August) mesoscale convective systems (MCSs) in the central United States during northwesterly flow regimes. To improve our understanding of warm season MCSs occurring over a variety of flow regimes, we track midlevel (600 hPa) vorticity perturbations (“MPs”) as 2D objects comprising wavelengths of 500–2,500 km over the central US from May–August of 2004–2021. We perform statistical analysis of relationships between metrics of MP objects (e.g., duration, size, intensity, and origin) and high‐resolution MCS precipitation characteristics (e.g., duration, total rainfall, rain coverage area, and motion) that occur while collocated with or in the absence of MPs to discern predictive capability of background dynamic features on storm precipitation potential. Although the majority of MPs collocated with MCS initiation occur during July–August, a significant number (40%) occur between May and June. Northwesterly flow MPs comprise a relative minority of our events, suggesting that MPs can affect MCSs across a variety of warm season flow regimes. MPs affecting MCSs initiated primarily over the high plains near the central Rockies. Only approximately 20% of tracked MCS initiation events were collocated with MPs, but these storms produced ∼25% greater lifetime rainfall and coverage area, and ∼29% more stratiform rain than non‐MP‐induced MCSs. In general, larger and more vigorous MPs resulted in more hydrologically impactful MCSs. The most directly attributable benefit to MCS initiation was from MP‐enhanced background vertical motion and thermodynamic instability (e.g., increased CAPE).

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2019

IceCube: Spaceflight Demonstration of 883-GHz Cloud Radiometer for Future Science

Cloud ice play important roles in Earth’s climate and weather systems through their interactions with atmospheric radiation, dynamics, energy and precipitation processes. Submillimeter (submm) wave remote sensing at 200-1000 GHz is able to provide the sensitivity not covered by visible (VIS)/infrared (IR) and low-frequency microwave (MW) sensors (10-183 GHz), and measure cloud ice in the middle-to-upper troposphere. The IceCube 883-GHz cloud radiometer is the latest of NASA’s efforts to advance the technology readiness level (TRL) of submm-wave receiver technology for future compact, low-cost implementation of Earth observing systems. Emerging CubeSat opportunities allow a fast-track development and spaceflight demonstration of IceCube on a 3-U CubeSat. Funded by NASA’s In-Space Validation of Earth Science Technologies (InVEST) program and Science Mission Directorate (SMD), IceCube is the first CubeSat developed and flown by Goddard Space Flight Center (GSFC) in 2.5 years, using commercial off-the-shelf (COTS) components and subsystems. It was successfully released from International Space Station (ISS) in May 2017, acquired 15-month science data and produced the first global map of the 883-GHz cloud ice. It achieved all mission objectives and provided a pathway for future cost-effective cloud observations from CubeSat constellation.

Submm-wave remote sensing↗

DOE OSTI2025

Large‐Scale Statistically Meaningful Patterns (LSMPs) Associated With Precipitation Extremes Over Northern California

Abstract We analyze large‐scale statistically meaningful patterns (LSMPs) that precede extreme precipitation (PEx) events over Northern California (NorCal). We find LSMPs by applying k‐means clustering to the two leading principal components of daily 500 hPa geopotential height anomalies two days before the onset, from October to March during 1948–2015. Statistical significance testing based on Monte Carlo simulations suggests a minimum of four statistically distinguished LSMP clusters. The four LSMP clusters are characterized as Northwest continental negative height anomaly, Eastward positive “Pacific‐North American Pattern (PNA),” Westward negative “PNA,” and Prominent Alaskan ridge. These four clusters, shown in multiple variables, evolve very differently and have differing links to the Arctic and tropical Pacific regions. Using binary forecast skill measures and a new copula‐based framework for predicting PEx events, we find LSMP indices that are useful predictors of NorCal PEx events, with moisture‐based variables being the best predictors of PEx events at least 6 days before the onset, and the lower atmospheric variables being better than their upper atmospheric counterparts any day in advance tested. To ensure statistical rigor, the LSMPs analyzed here (with the modified acronym) include local tests of both significance and consistency, which are not always featured in the literature on large‐scale meteorological patterns.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRSDate not supplied

Guided Design of Alloys, Strengthened via Precipitation

Using theoretical and computational guidance, we are designing stronger middle and high-entropy alloys and superalloys for the airspace applications. We focus on improving mechanical properties of materials at cryogenic and elevated temperatures. Here we discuss basic science and fundamental theory that are being used for guided design of next-generation alloys. As examples, we consider the medium-entropy NiCoCr alloy and precipitated superalloys with a local phase transformation strengthening. This research is funded by NASA’s Aeronautics Research Mission Directorate (ARMD) via Transformational Tools and Technologies (TTT) Project.

Alloys↗

NASA NTRS2012

Tropical Rainfall Measuring Mission (TRMM) Precipitation Data and Services for Research and Applications

Precipitation is a critical component of the Earth's hydrological cycle. Launched on 27 November 1997, TRMM is a joint U.S.-Japan satellite mission to provide the first detailed and comprehensive data set of the four-dimensional distribution of rainfall and latent heating over vastly under-sampled tropical and subtropical oceans and continents (40 S - 40 N). Over the past 14 years, TRMM has been a major data source for meteorological, hydrological and other research and application activities around the world. The purpose of this short article is to inform that the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) provides TRMM archive and near-real-time precipitation data sets and services for research and applications. TRMM data consist of orbital data from TRMM instruments at the sensor s resolution, gridded data at a range of spatial and temporal resolutions, subsets, ground-based instrument data, and ancillary data. Data analysis, display, and delivery are facilitated by the following services: (1) Mirador (data search and access); (2) TOVAS (TRMM Online Visualization and Analysis System); (3) OPeNDAP (Open-source Project for a Network Data Access Protocol); (4) GrADS Data Server (GDS); and (5) Open Geospatial Consortium (OGC) Web Map Service (WMS) for the GIS community. Precipitation data application services are available to support a wide variety of applications around the world. Future plans include enhanced and new services to address data related issues from the user community. Meanwhile, the GES DISC is preparing for the Global Precipitation Measurement (GPM) mission which is scheduled for launch in 2014.

Liu, Zhong↗

DOE OSTI2024

A Brief Review of the Impact of Neutron Irradiation Damage in Tungsten and Its Alloys

Neutron irradiation poses a substantial challenge in the development and application of tungsten (W) and its alloys, predominantly in the framework of nuclear fusion and fission environments. Although W is well-acknowledged for its unique properties like its high melting temperature and higher resistance to sputtering, transmutation products, such as Re and Os, form and impact the alloy properties as a result of neutron irradiation. This transmutation effect accompanied by significant microstructure damage due to neutron irradiation can lead to the significant degradation of mechanical properties. This review surveys the literature focusing on the microstructural modifications post-irradiation and its impacts on the irradiation hardening. This review provides insights into the elaborative understanding on the neutron radiation damage on W and W alloys by exploring the microstructural evolution and hardness changes post-irradiation. The gaps and future opportunities for understanding neutron radiation damage in W are briefly summarized.

36 MATERIALS SCIENCE↗

NASA NTRS1988

Energetic Neutral Atom Precipitation (ENAP)

The Energetic Neutral Atom Precipitation experiment is scheduled to be flown on the Atmospheric Laboratory for Applications and Science (ATLAS 1) NASA mission. The objective of this experiment is to measure very faint emissions at nighttime arising from fluxes of energetic neutral atoms in the thermosphere. These energetic atoms have energies ranging up to about 50 keV, and arise from ions of hydrogen, helium, and oxygen trapped in the inner magnetosphere. Some of these ions become neutralized in charge exchange reactions with neutral hydrogen in the hydrogen geocorona that extends through the region. The ions are trapped on magnetic field lines which cross the equatorial plane at 2 to 6 earth radii distance, and they mirror at a range of heights on these field lines, extending down to the thermosphere at 500 km altitude. The ATLAS 1 measurements will not be of the neutral atoms themselves but of the optical emission produced by those on trajectories that intersect the thermosphere. The ENAP measurements are to be made using the Imaging Spectrometric Observatory (ISO) which is being flown on the ATLAS mission primarily for daytime spectral observations, and the ENAP measurements will all be nighttime measurements because of the faintness of the emissions and the relatively low level of magnetic activity expected.

Tinsley, B. A.↗