SEARCH · Search NASA

Results for “Priming effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Facular Limb-darkening Functions for Irradiance Modeling

The limb darkening function of faculae is an important factor in estimating facular contributions to solar irradiance variations. The existing photometric data is reviewed and a synthetic limb darkening function for faculae was generated which was compared with the limb darkening functions currently in use for irradiance modeling. The excess facular flux ranges from 0.017 to 0.0349 of the solar photospheric flux for the various representations. The present limitation appears to be the lack of comprehensive photometric data. The representations are especially varied near the limb, where photometry is most difficult. Synoptic data on calcium plage areas is used as a substitute for facular areas in modeling. Based upon the existing data, the present best value for the effect of faculae on the solar constant is given by delta s/s = 3.9 x 10(-8) A (sub plage prime) for an active region near disk center, where A (sub plage) is the calcium plage area in millionths of a solar hemisphere.

Hirayama, T.↗

NASA NTRS1985

The effect of tantalum on the structure/properties of two polycrystalline nickel-base superalloys: B-1900 + Hf MAR-M247

The microstructure, phase compositions, and phase fractions were studied in conventionally cast B-1900 + Hf and both conventionally cast and directionally solidified MAR-M247 as a function of tantalum concentration. The hot tensile and creep rupture properties of the solutionized and aged MAR-M247-type alloys were also determined as a function of tantalum level. The effects of tantalum on the microstructure and phase compositions of B-1900 + Hf and MAR-M247 (conventionally cast and directionally solidified) were found to be very similar. The addition of tantalum to the as cast and heat treated alloys was shown to cause the partial replacement of the Hf in the MC carbides by Ta, although the degree of replacement was decreased by the solutionizing and aging heat treatment. The gamma prime and minor phase fractions (primarily MC type carbides) both increased approximately linearly with tantalum concentration. The gamma prime phase compositions were relatively insensitive to tantalum variations with the exception of the tantalum and/or hafnium levels. Bulk tantalum additions increased the tantalum, chromium, and cobalt levels of the gamma phase in both alloy series. The increase in the concentrations of the latter two elements in the gamma phase was a result of the decrease in the gamma phase fraction with increasing bulk tantalum concentration and constant gamma/gamma prime partitioning ratio. Tantalum additions increased the yield stress and ultimate tensile strength of the directionally solidified MAR-M247 type alloys and had no significant effect on ductility.

Janowski, G. M.↗

NASA NTRS1976

Refinement of Promising Coating Compositions for Directionally Cast Eutectics

The successful application of high creep strength, directionally solidified gamma/gamma prime-delta (Ni-19.7Cb-6Cr-2.5Al) eutectic superalloy turbine blades requires the development of suitable coatings for airfoil, root and internal blade surfaces. In order to improve coatings for the gamma/gamma prime-delta alloy, the current investigation had the goals of (1) refining promising coating compositions for directionally solidified eutectics, (2) evaluating the effects of coating/ substrate interactions on the mechanical properties of the alloy, and (3) evaluating diffusion aluminide coatings for internal surfaces. Burner rig cyclic oxidation, furnace cyclic hot corrosion, ductility, and thermal fatigue tests indicated that NiCrAlY+Pt(63 to 127 micron Ni-18Cr-12Al-0.3Y + 6 micron Pt) and NiCrAlY(63 to 127 micron Ni-18Cr-12Al-0.3Y) coatings are capable of protecting high temperature gas path surfaces of eutectic alloy airfoils. Burner rig (Mach 0.37) testing indicated that the useful coating life of the 127 micron thick coatings exceeded 1000 hours at 1366 K (2000 deg F). Isothermal fatigue and furnance hot corrosion tests indicated that 63 micron NiCrAlY, NiCrAlY + Pt and platinum modified diffusion aluminide (Pt + Al) coating systems are capable of protecting the relatively cooler surfaces of the blade root. Finally, a gas phase coating process was evaluated for diffusion aluminizing internal surfaces and cooling holes of air-cooled gamma/gamma prime-delta turbine blades.

Strangman, T. E.↗

NASA NTRS1994

Skeletal unloading induces resistance to insulin-like growth factor I

In previous studies with a hindlimb elevation model, we demonstrated that skeletal unloading transiently inhibits bone formation. This effect is limited to the unloaded bones (the normally loaded humerus does not cease growing), suggesting that local factors are of prime importance. IGF-I is one such factor; it is produced in bone and stimulates bone formation. To determine the impact of skeletal unloading on IGF-I production and function, we assessed the mRNA levels of IGF-I and its receptor (IGF-IR) in the proximal tibia and distal femur of growing rats during 2 weeks of hindlimb elevation. The mRNA levels for IGF-I and IGF-IR rose during hindlimb elevation, returning toward control values during recovery. This was accompanied by a 77% increase in IGF-I levels in the bone, peaking at day 10 of unloading. Changes in IGF binding protein levels were not observed. Infusion of IGF-I (200 micrograms/day) during 1 week of hindlimb elevation doubled the increase in bone mass of the control animals but failed to reverse the cessation of bone growth in the hindlimb-elevated animals. We conclude that skeletal unloading induces resistance to IGF-I, which may result secondarily in increased local production of IGF-I.

NASA Center ARC↗

NASA NTRS1981

Low-energy electron effects on tensile modulus and infrared transmission properties of a polypyromellitimide film

Infrared (IR) spectroscopy and tensile modulus testing were used to evaluate the importance of experimental procedure on changes in properties of pyromellitic dianhydride-p,p prime-oxydianiline film exposed to electron radiation. The radiation exposures were accelerated, approximate equivalents to the total dose expected for a 30 year mission in geosynchronous Earth orbit. The change in the tensile modulus depends more on the dose rate and the time interval between exposure and testing than on total dose. The IR data vary with both total dose and dose rate. A threshold dose rate exists below which reversible radiation effects on the IR spectra occur. Above the threshold dose rate, irreversible effects occur with the appearance of a new band. Post-irradiation and in situ IR absorption bands are significantly different. It is suggested that the electron radiation induced metastable, excites molecular states.

Ferl, J. E.↗

DOE OSTI2024

Homologous mutations in human β, embryonic, and perinatal muscle myosins have divergent effects on molecular power generation

Mutations at a highly conserved homologous residue in three closely related muscle myosins cause three distinct diseases involving muscle defects: R671C in β-cardiac myosin causes hypertrophic cardiomyopathy, R672C and R672H in embryonic skeletal myosin cause Freeman–Sheldon syndrome, and R674Q in perinatal skeletal myosin causes trismus-pseudocamptodactyly syndrome. It is not known whether their effects at the molecular level are similar to one another or correlate with disease phenotype and severity. To this end, we investigated the effects of the homologous mutations on key factors of molecular power production using recombinantly expressed human β, embryonic, and perinatal myosin subfragment-1. We found large effects in the developmental myosins but minimal effects in β myosin, and magnitude of changes correlated partially with clinical severity. The mutations in the developmental myosins dramatically decreased the step size and load-sensitive actin-detachment rate of single molecules measured by optical tweezers, in addition to decreasing overall enzymatic (ATPase) cycle rate. In contrast, the only measured effect of R671C in β myosin was a larger step size. Our measurements of step size and bound times predicted velocities consistent with those measured in an in vitro motility assay. Finally, molecular dynamics simulations predicted that the arginine to cysteine mutation in embryonic, but not β, myosin may reduce pre-powerstroke lever arm priming and ADP pocket opening, providing a possible structural mechanism consistent with the experimental observations. This paper presents direct comparisons of homologous mutations in several different myosin isoforms, whose divergent functional effects are a testament to myosin’s highly allosteric nature.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Scalable thin graphene oxide membranes enabled by polydopamine gutter layer

Two-dimensional (2D) nanosheets have been widely used to fabricate thin-film composite membranes for dye desalination. However, they often need to be thick to mitigate the defects resulting from their random stacking and rough support surface. Herein, bio-adhesive polydopamine (PDA) is used as a gutter layer to prepare graphene oxide (GO)-based membranes by improving the adhesion between the GO and porous support and providing a smooth surface to form thin, highly selective layers. For example, the PDA priming reduces the GO layer thickness by 57 %, from 447 to 190 nm, while achieving similar dye desalination properties. The effect of the dopamine concentration, exposure time, and GO layer thickness on the membrane structure and desalination performance are thoroughly investigated using various techniques, such as scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), and x-ray diffraction (XRD). The PDA gutter layer is also applied for hollow fiber membranes, achieving water permeance of 79 L m -2 h −1 bar−1 and rejection of ∼99 % for Direct red 80. The membranes were challenged by simulated dye/salt mixtures to elucidate the complicated effect of the compositions on the desalination performance. Furthermore, this study unveils a new avenue to improve separation performance and large-scale manufacturability of 2D material-based membranes.

Dye desalination↗

NASA NTRS1986

Satellite contributions to convective scale weather analysis and forecasting

Severe weather phenomena which are amenable to remote sensing by satellite instruments and having resolution fine enough to discern mesoscale features are described. GOES satellites acquire imagery with 1 km resolution in the visible band and 8 km at IR wavelengths. Animation of the images allows tracking the evolution and motions of clouds, which are the prime indicators of convective activity. Sample satellite imagery of sea, lake and river breezes which reveal differential heating processes, the effect of early morning cloud cover, thunderstorm outflow processes, and mesoscale convective systems are provided. Techniques for analyzing the satellite data to predict the onset of severe weather are discussed.

Purdom, James F. W.↗

NASA NTRS1988

Creep behavior of tungsten/niobium and tungsten/niobium-1 percent zirconium composites

A study was conducted to determine the feasibility of using tungsten fiber reinforced niobium or niobium-1 percent zirconium matrix composites to meet the anticipated increased temperature and creep resistance requirements imposed by advanced space power systems. The results obtained on the short time tensile properties indicated that W/Nb composites showed significant improvements in high temperature strength and offer significant mass reductions for high temperature space power systems. The prime material requirement for space power systems applications is long time creep resistance. A study was conducted to determine the effect of high temperature exposure on the properties of these composites, with emphasis upon their creep behavior at elevated temperatures.

Petrasek, D. W.↗

NASA NTRS1988

Microstructure-property relationships in directionally solidified single-crystal nickel-base superalloys

This paper discusses some of the microstructural features which influence the creep properties of directionally solidified and single-crystal nickel-base superalloys. Gamma prime precipitate size and morphology, gamma-gamma (prime) lattice mismatch, phase instability, alloy composition, and processing variations are among the factors considered. Recent experimental results are reviewed and related to the operative deformation mechanisms and to the corresponding mechanical properties. Special emphasis is placed on the creep behavior of single-crystal superalloys at high temperatures, where directional gamma (prime) coarsening is prominent, and at lower temperatures, where gamma (prime) coarsening rates are significantly reduced. It can be seen that very subtle changes in microstructural features can have profound effects on the subsequent properties of these materials.

Mackay, Rebecca A.↗

NASA NTRS2018

A Prognostic Launch Vehicle Probability of Failure Assessment Methodology for Conceptual Systems Predicated on Human Causal Factors

Lessons learned from past failures of launch vehicle developments and operations were used to create a new method to predict the probability of failure of conceptual systems. Existing methods such as Probabilistic Risk Assessments and Human Risk Assessments were considered but found to be too cumbersome for this type of system-wide application for yet-to-be-flown vehicles. The basis for this methodology were historic databases of past failures, where it was determined that various faulty human-interactions were the predominant root causes of failure rather than deficient component reliabilities evaluated through statistical analysis. This methodology contains an expert scoring part which can be used in either a qualitative or a quantitative mode. The method produces two products: a numerical score of the probability of failure and guidance to program management on critical areas in need of increased focus to improve the probability of success. In order to evaluate the effectiveness of this new method, data from a concluded vehicle program (USAF's Titan IV with the Centaur G-Prime upper stage) was used as a test case. The theoretical vs. actual probability of failure was found to be 4.46% vs. 6.67% respectively. Recommendations are made for future applications of this method to ongoing launch vehicle development programs.

Launch Vehicle↗

NASA NTRS2019

Prognostic Launch Vehicle Probability of Failure Assessment Methodology for Conceptual Systems Predicated on Human Causal Factors

Lessons learned from past failures of launch vehicle developments and operations were used to create a new method to predict the probability of failure of conceptual systems. Existing methods such as Probabilistic Risk Assessments and Human Risk Assessments were considered but found to be too cumbersome for this type of system-wide application for yet-to-be-flown vehicles. The basis for this methodology were historic databases of past failures, where it was determined that various faulty human-interactions were the predominant root causes of failure rather than deficient component reliabilities evaluated through statistical analysis. This methodology contains an expert scoring part which can be used in either a qualitative or a quantitative mode. The method produces two products: a numerical score of the probability of failure or guidance to program management on critical areas in need of increased focus to improve the probability of success. In order to evaluate the effectiveness of this new method, data from a concluded vehicle program (USAF's Titan IV with the Centaur G-Prime upper stage) was used as a test case. Although the theoretical vs. actual probability of failure was found to be in reasonable agreement (4.46% vs. 6.67% respectively) the underlying sub-root cause scoring had significant disparities attributable to significant organizational changes and acquisitions. Recommendations are made for future applications of this method to ongoing launch vehicle development programs.

Craig H Williams↗

DOE OSTI2022

Innovative, Versatile and Cost-Effective Solid Oxide Fuel Cell Stack Concept

This report summarizes the work performed for the U. S. Department of Energy/National Energy Technology Laboratory (DOE/NETL) under Cooperative Agreement DE-FE0026211 entitled “Innovative, Versatile and Cost-Effective Solid Oxide Fuel Cell Stack Concept”. The overall objective of this project was to develop and evaluate a solid oxide fuel cell (SOFC) stack configuration based on a novel prime-surface interconnect design for a broad range of power generation applications. The prime-surface is a one-piece metallic interconnect that incorporates both fuel and oxidant flow fields with peaks on one side of the interconnect serving as flow channels (valleys) on the other side. (One example is the egg-carton shaped interconnect design.) This stack technology has several attractive features including reduced stack weight and volume, decreased performance losses in stacking, improved sealing, versatility in incorporation of different types of cell construction (thin-film cells or sintered cells) and flexibility in gas flow configuration (cross-flow, co-flow or counter-flow). These features lead to lower cost, better performance, and enhanced reliability for the stack. The R&D work of this project focused on demonstrating fabrication, operability and cost effectiveness of the stack design and was conducted by University of California, San Diego (UCSD) in conjunction with OxEon Energy (OxEon). The key technical activities of this project involved prime-surface interconnect design and fabrication development; supported thin-film cell structure development; stack development; stack operation demonstration; and stack cost assessment. The results of these activities are summarized in this report.

30 DIRECT ENERGY CONVERSION↗

NASA NTRS1982

Structure-property effects of tantalum additions to nickel-base superalloys

The characterization of the effect of Ta on the structure of Ni base superalloys, the determination of the effects of Ta (structure) variations on the mechanical, thermal, and oxidation behavior, and the identification of alloying elements which have potential as substitutes for Ta are investigated. Mar M247 type alloys are emphasized; nominal and analyzed compositions of ten alloys under study are given. X-ray and composition analysis are being used to determine the partitioning of alloying elements between gamma, gamma primes, and MC (cubic) as a function of Ta content. The diffusional interactions of the Mar M247-type alloys with as cast beta + gamma alloys are studied to determine the effects of Ta on alloy/coating degradation.

Heckel, R. W.↗

DOE OSTI2025

Advances and perspectives of hard carbon anode modulated by defect/hetero elemental engineering for sodium ion batteries

Sodium-ion batteries (SIBs) serve as a promising complement to lithium-ion batteries for large-scale energy storage, leveraging the abundance of sodium resources and notable safety advantages. The key advancement in SIB industrialization hinges on identifying a cost-effective and high-performance anode material, similar to the graphite anode in lithium-ion batteries. Hard carbon emerges as prime anode materials for SIBs, boasting high specific capacity, low sodium storage potential, and wide availability. However, practical applications of hard carbon encounters challenges such as low initial Coulombic efficiency (ICE), inadequate long-term cycling stability, and poor rate performance. Recent research has focused on the optimization of hard carbon electrodes through functional design. In this comprehensive review, we have meticulously examined the progress in enhancing sodium storage performance through microstructural modulation within hard carbon, encompassing four pivotal aspects: heteroatom doping, incorporation of oxygen functional groups, surface coating, and intrinsic defect engineering. Progress in implementing these strategies is scrutinized, while the merits and challenges of each defect engineering approach are discussed. In conclusion, this review also looks into forthcoming opportunities and challenges in the practical application process of hard carbon electrodes in SIBs.

25 ENERGY STORAGE↗

DOE OSTI2021

The diphoton $$q_T$$ spectrum at N$$^3$$LL$$^\prime $$ + NNLO

Abstract We present a $$q_T$$ q T -resummed calculation of diphoton production at order N $$^3$$ 3 LL $$^\prime $$ ′ + NNLO. To reach the primed level of accuracy we have implemented the recently published three-loop $${\mathcal {O}}(\alpha _s^3)$$ O ( α s 3 ) virtual corrections in the $$q\bar{q}$$ q q ¯ channel and the three-loop transverse momentum dependent beam functions and combined them with the existing infrastructure of , a code performing resummation at order N $${}^3$$ 3 LL. While the primed predictions are parametrically not more accurate, one typically observes from lower orders and other processes that they are the dominant effect of the next order. We include in both the $$q\bar{q}$$ q q ¯ and loop-induced gg channel the hard contributions consistently together at order $$\alpha _s^3$$ α s 3 and find that the resummed $$q\bar{q}$$ q q ¯ channel without matching stabilizes indeed. Due to large matching corrections and large contributions and uncertainties from the gg channel, the overall improvements are small though. We furthermore study the effect of hybrid-cone photon isolation and hard-scale choice on our fully matched results to describe the ATLAS $$\text {8}$$ 8 TeV data and find that the hybrid-cone isolation worsens agreement at small $$q_T$$ q T compared to smooth-cone isolation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Forecasting ground-based sensitivity to the Rayleigh scattering of the CMB in the presence of astrophysical foregrounds

The Rayleigh scattering of cosmic microwave background (CMB) photons off the neutral hydrogen produced during recombination effectively creates an additional scattering surface after recombination that encodes new cosmological information, including the expansion and ionization history of the universe. A first detection of Rayleigh scattering is a tantalizing target for next-generation CMB experiments. We have developed a Rayleigh scattering forecasting pipeline that includes instrumental effects, atmospheric noise, and astrophysical foregrounds (e.g., Galactic dust, cosmic infrared background, or CIB, and the thermal Sunyaev-Zel'dovich effect). We forecast the Rayleigh scattering detection significance for several upcoming ground -based experiments, including SPT-3G+, Simons Observatory, CCAT-prime, and CMB-S4, and examine the limitations from atmospheric and astrophysical foregrounds as well as potential mitigation strategies. When combined with Planck data, here we estimate that the ground-based experiments will detect Rayleigh scattering with a significance between 1.6 and 3.7, primarily limited by atmospheric noise and the CIB.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

The hitchhiker's guide to 4d $\mathcal{N}=2$ superconformal field theories

Superconformal field theory with \mathcal{N}=2 𝒩 = 2 supersymmetry in four dimensional spacetime provides a prime playground to study strongly coupled phenomena in quantum field theory. Its rigid structure ensures valuable analytic control over non-perturbative effects, yet the theory is still flexible enough to incorporate a large landscape of quantum systems. Here we aim to offer a guidebook to fundamental features of the 4d \mathcal{N}=2 𝒩 = 2 superconformal field theories and basic tools to construct them in string/M-/F-theory. The content is based on a series of lectures at the Quantum Field Theories and Geometry School in July 2020.

Akhond, Mohammad↗