Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADAR ATTENUATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Radiometric correction of scatterometric wind measurements

Use of a spaceborne scatterometer to determine the ocean-surface wind vector requires accurate measurement of radar backscatter from ocean. Such measurements are hindered by the effect of attenuation in the precipitating regions over sea. The attenuation can be estimated reasonably well with the knowledge of brightness temperatures observed by a microwave radiometer. The NASA SeaWinds scatterometer is to be flown on the Japanese ADEOS2. The AMSR multi-frequency radiometer on ADEOS2 will be used to correct errors due to attenuation in the SeaWinds scatterometer measurements. Here we investigate the errors in the attenuation corrections. Errors would be quite small if the radiometer and scatterometer footprints were identical and filled with uniform rain. However, the footprints are not identical, and because of their size one cannot expect uniform rain across each cell. Simulations were performed with the SeaWinds scatterometer (13.4 GHz) and AMSR (18.7 GHz) footprints with gradients of attenuation. The study shows that the resulting wind speed errors after correction (using the radiometer) are small for most cases. However, variations in the degree of overlap between the radiometer and scatterometer footprints affect the accuracy of the wind speed measurements.

Source record↗
NASA NTRS1994

An alternative approach to estimating rainfall rate by radar using propagation differential phase shift

In this work it is shown that for frequencies from 3 to 13 GHz, the ratio of the specific propagation differential phase shift phi(sub DP) to the rainfall rate can be specified essentially independently of the form of the drop size distribution by a function only of the mass-weighted mean drop size D(sub m). This significantly reduces one source of substantial bias errors common to most other techniques for measuring rain by radar. For frequencies 9 GHz and greater, the coefficient can be well estimated from the ratio of the specific differential attenuation to phi(sub DP), while at nonattenuating frequencies such as 3 GHz, the coefficient can be well estimated using the differential reflectivity. In practice it appears that this approach yields better estimates of the rainfall rate than any other current technique. The best results are most likely at 13.80 GHz, followed by those at 2.80 GHz. An optimum radar system for measuring rain should probably include components at a both frequencies so that when signals at 13.8 GHz are lost because of attenuation, good measurements are still possible at the lower frequency.

Jameson, A. R.↗
NASA NTRS1984

Measuring and Modeling of the Dielectric Properties and Attenuation of Vegetation

The dielectric properties of vegetation material--primarily agricultural plants--as a function of moisture content and microwave frequency was measured and used to develop dielectric mixing models for the vegetation-water mixture. A model for the loss factor of a vegetation canopy was also developed. During the first phase of this investigation, three waveguide transmission systems covering from 1 to 2-GHz, from 3.5 to 6.5-GHz, and from 7.5 to 8.5-GHz bands were constructed and calibrated. By measuring the magnitude and phase of the field transmission coefficient of a given sample, it was possible to calculate the real and imaginary parts of the complex dielectric constant of the sample. Measurements were made for numerous samples of leaves and stalks of wheat and corn, and for wheat heads. Also, dielectric measurements were made of the liquid included in the vegetation material after extraction by mechanical means. The propagation loss is more than an order of magnitude greater than had previously been assumed. Various types of dielectric mixing models were investigated in terms of the available data, and a propagation model was developed and evaluated against direct canopy attenuation measurements. The canopy measurements were made by transmitting a signal from a radar antenna mounted atop a truck-mounted boom, and using a small antenna mounted on a rail beneath the canopy to receive it.

Ulaby, F. T.↗
NASA NTRS2022

Stability of the Dual-Frequency Radar Equations and a New Method Applied to the GPM’s Dual-Frequency Precipitation Radar (DPR) Data

A new algorithm is proposed that estimates two parameters of the particle size distribution (PSD) at each range bin from the Global Precipitation Measurement’s (GPM’s) Dual-frequency Precipitation Radar data. The equation that expresses the relationship of the PSD parameters between adjacent range bins is derived. By including the attenuation effect within the bin in the discretized equation, the new algorithm alleviates the double-solution problem when attenuation within the bin is sufficiently large. The stability of the solutions to the equation depends on the value of the mean diameter D(sub m) and its gradient with respect to range in the case of liquid precipitation. If the critical diameter above which the dual-frequency ratio (DFR) of radar reflectivity factors becomes a monotonically increasing function of D(sub m), the backward processing of the equation provides a stable or moderately diverging solution, unlike the forward processing that often gives unstable solutions. To provide a set of initial conditions without using the surface reference technique (SRT) in the backward processing, an initialization method using the Hitschfeld-Bordan attenuation correction method is proposed and tested. The proposed algorithm may provide a tool for investigating the assumptions used in various algorithms.

GPM↗
NASA NTRS2010

Changes in the TRMM Version-5 and Version-6 Precipitation Radar Products Due to Orbit Boost

The performance of the version-5 and version-6 Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) products before and after the satellite orbit boost is assessed through a series of comparisons with Weather Surveillance Radar (WSR)-88D ground-based radar in Melbourne, Florida. Analysis of the comparisons of radar reflectivity near the storm top from the ground radar and both versions of the PR indicates that the PR bias relative to the WSR radar at Melbourne is on the order of 1dB for both pre- and post-boost periods, indicating that the PR products maintain accurate calibration after the orbit boost. Comparisons with the WSR-88D near-surface reflectivity factors indicate that both versions of the PR products accurately correct for attenuation in stratiform rain. However, in convective rain, both versions exhibit negative biases in the near-surface radar reflectivity with version-6 products having larger negative biases than version-5. Rain rate comparisons between the ground and space radars show similar characteristics

Liao, Liang↗
NASA NTRS2019

Path Attenuation Estimates for the DPR

The algorithm for the Surface Reference Technique (SRT) has been updated from version V6A to version V6X. The modified algorithm is designed to process dual-frequency radar data which are now available over the full swath. Comparisons between V6A and V6X show that the dual-wavelength version of the SRT (DSRT) eliminates some of the overestimates of path attenuation in the outer swath that occurred in the earlier version of the algorithm when dual-frequency data was unavailable in the outer swath. However, the DSRT is not reliable in cases of light rain rates where only the Ku-band channel detects rain, nor is it reliable in high rain rate cases where the Ka-band surface signal is lost through attenuation. A modified hybrid algorithm is planned for version 7 that can combine the best features of single- and dual-frequency path attenuation methods.

Meneghini, Robert↗
DOE OSTI2021

Multifrequency radar observations of clouds and precipitation including the G-band

Abstract. Observations collected during the 25 February 2020 deployment of the Vapor In-Cloud Profiling Radar at the Stony Brook Radar Observatory clearly demonstrate the potential of G-band radars for cloud and precipitation research, something that until now was only discussed in theory. The field experiment, which coordinated an X-, Ka-, W- and G-band radar, revealed that the Ka–G pairing can generate differential reflectivity signal several decibels larger than the traditional Ka–W pairing underpinning an increased sensitivity to smaller amounts of liquid and ice water mass and sizes. The observations also showed that G-band signals experience non-Rayleigh scattering in regions where Ka- and W-band signal do not, thus demonstrating the potential of G-band radars for sizing sub-millimeter ice crystals and droplets. Observed peculiar radar reflectivity patterns also suggest that G-band radars could be used to gain insight into the melting behavior of small ice crystals. G-band signal interpretation is challenging, because attenuation and non-Rayleigh effects are typically intertwined. An ideal liquid-free period allowed us to use triple-frequency Ka–W–G observations to test existing ice scattering libraries, and the results raise questions on their comprehensiveness. Overall, this work reinforces the importance of deploying radars (1) with sensitivity sufficient enough to detect small Rayleigh scatters at cloud top in order to derive estimates of path-integrated hydrometeor attenuation, a key constraint for microphysical retrievals; (2) with sensitivity sufficient enough to overcome liquid attenuation, to reveal the larger differential signals generated from using the G-band as part of a multifrequency deployment; and (3) capable of monitoring atmospheric gases to reduce related uncertainty.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Evaluation of KDP Estimation Algorithm Performance in Rain Using a Known-Truth Framework

Accurate estimation of specific differential phase ( K DP ) is necessary for rain rate estimation, attenuation correction, and hydrometeor classification algorithms. There are numerous published methods to process polarimetric radar observations of propagation differential phase shift (Φ DP ) and estimate K DP , but the corresponding K DP estimate uncertainty is unquantified. This study provides guidance on how commonly used K DP estimation algorithms perform in various environments. Here, we create numerous synthetic (“true”) K DP profiles, integrate over them to obtain “smoothed” Φ DP , and then add noise typical of S-band operational weather radar measurements. Each algorithm is applied to our noisy Φ DP profiles and compared to the true K DP profile such that the errors and uncertainty are quantified. The synthetic K DP profiles are Gaussian in shape, which allows systematic variations in their magnitude and width to determine how each algorithm performs in smooth, slowly changing K DP profiles, as well as steep profiles. Results demonstrate that algorithm performance is dependent on the Φ DP field received. These results are further supported by an error analysis of each algorithm for two more complicated synthetic K DP profiles. Some K DP algorithms allow users to change various tuning parameters; a subset of these tuning parameters is tested to provide guidance on how changing these parameters impacts algorithm performance. We then provide evidence that our known-truth framework provides insight into algorithm performance in observed data through two case studies.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1981

Ground truth for oceanic rainfall

Communications systems operating at frequencies in excess of 10 GHz are degraded significantly by rainfall. To provide the information needed for design of these millimeter wave systems, rain attentuation models were developed and data bases of propagation related information were accumulated. These data bases were developed based on the signal level measurements of geostationary satellite beacons at selected frequencies. Groundbased radar reflection measurements were able to develop data bases for system design. The rain attenuation models allow accurate correlation between the rain rate and the attenuation.

Dorman, C. E.↗
NASA NTRSDate not supplied

Diurnal Cycles of Intense Thunderstorms As Seen By Satellites

Spaceborne sensors cannot directly measure aspects of severe weather occurring at ground-level. Tools from Geostationary Earth Orbit (GEO) and Low Earth Orbit (LEO) can be related to storm intensity and likelihood of severe weather. Visible and Infrared (GEO and LEO) measure cloud-top properties and horizontal structure. Some properties have empirical correlations with severe weather occurrence. Precipitation Radar (LEO) measures vertical profile of reflectivity related to particle size and concentration, but attenuates (2.2-cm and shorter wavelengths) well above the surface in intense thunderstorms. Lightning mappers (GEO and LEO) measure lightning flash rates and flash properties, which relate to updraft properties including size and vigor. SAR and optical sensors can detect damage paths on the surface after a storm has passed. (Depends on the vegetation type and maturity.)

Daniel J Cecil↗
NASA NTRS2009

UAVSAR Phased Array Aperture

This paper describes the development of a patch antenna array for an L-band repeat-pass interferometric synthetic aperture radar (InSAR) instrument that is to be flown on an unmanned aerial vehicle (UAV). The antenna operates at a center frequency of 1.2575 GHz and with a bandwidth of 80 MHz, consistent with a number of radar instruments that JPL has previously flown. The antenna is designed to radiate orthogonal linear polarizations in order to facilitate fully-polarimetric measurements. Beam-pointing requirements for repeat-pass SAR interferometry necessitate electronic scanning in azimuth over a range of -20degrees in order to compensate for aircraft yaw. Beam-steering is accomplished by transmit/receive (T/R) modules and a beamforming network implemented in a stripline circuit board. This paper, while providing an overview of phased array architecture, focuses on the electromagnetic design of the antenna tiles and associated interconnects. An important aspect of the design of this antenna is that it has an amplitude taper of 10dB in the elevation direction. This is to reduce multipath reflections from the wing that would otherwise be detrimental to interferometric radar measurements. This taper is provided by coupling networks in the interconnect circuits as opposed to attenuating the output of the T/R modules. Details are given of material choices and fabrication techniques that meet the demanding environmental conditions that the antenna must operate in. Predicted array performance is reported in terms of co-polarized and crosspolarized far-field antenna patterns, and also in terms of active reflection coefficient.

Unmanned Aerial Vehicle (UAV)↗
NASA NTRS2017

Radar Autofocus Algorithm Incorporating a priori Terrain Knowledge for Correction of Mars’ Ionospheric Distortion in MARSIS Observations

Low-frequency subsurface radar observations of Mars’ polar ice deposits by MARSIS (Mars Advanced Radar for Subsurface and Ionosphere Sounding) are heavily impacted by the electron content of Mars’ ionosphere. The resulting ionospheric distortion can be represented as attenuation and bulk delay, in addition to higher-order frequency dispersion effects. Baseline, uncorrected images are often unusable when the solar zenith angle is less than 90◦ (day side). In this work, a radar autofocus algorithm is developed that estimates and inverts ionospheric distortion, producing a focused radargram of the ice deposit subsurface. Previously published autofocus algorithms have sought to maximize peak-to-noise contrast, which may yield sub-optimal results for complex terrain. Instead, a maximum likelihood approach is developed that incorporates simulated surface clutter returns for the current spacecraft position, based on the Mars Orbiter Laser Altimeter (MOLA) elevation model of the Martian surface. An ancillary product is a surface-only clutter simulation for each orbit, which is necessary to identify true subsurface features.

McMichael, Joseph G.↗
NASA NTRS1981

Imaging radar observations of volcanic features in Medicine Lake Highland, California

Synthetic aperture L-band radar images of Medicine Lake Highland, California, as obtained from the JPL-NASA aircraft and Seasat orbital systems, are presented. Image interpretation is based on two types of information: slope and topographic effects for geomorphic information, and reflectivity or backscatter in flat terrain which is related to surface roughness and to the surface dielectric constant. Cinder cones and lava tubes are visible (geomorphic features), and three types of lava surfaces are: aa, pahoehoe, and block. In addition, to infer lava flow relative ages, overlapping flow fronts and roughness attenuation observations may be used. It is hoped that this research will improve the understanding of the radar signature of volcanic areas, and will be helpful in interpreting data obtained from spaceborne sensors over the earth and, in particular, Venus.

Farr, T. G.↗
NASA NTRS1985

Numerical methods for analyzing electromagnetic scattering

Numerical methods to analyze electromagnetic scattering are presented. The dispersions and attenuations of the normal modes in a circular waveguide coated with lossy material were completely analyzed. The radar cross section (RCS) from a circular waveguide coated with lossy material was calculated. The following is observed: (1) the interior irradiation contributes to the RCS much more than does the rim diffraction; (2) at low frequency, the RCS from the circular waveguide terminated by a perfect electric conductor (PEC) can be reduced more than 13 dB down with a coating thickness less than 1% of the radius using the best lossy material available in a 6 radius-long cylinder; (3) at high frequency, a modal separation between the highly attenuated and the lowly attenuated modes is evident if the coating material is too lossy, however, a large RCS reduction can be achieved for a small incident angle with a thin layer of coating. It is found that the waveguide coated with a lossy magnetic material can be used as a substitute for a corrugated waveguide to produce a circularly polarized radiation yield.

Lee, S. W.↗
NASA NTRS1980

Microwave radar and radiometric remote sensing measurements of lake ice

Simultaneous microwave radar and spectral radiometric data were collected over Lake Erie during March 1978. A theoretical development is presented which interprets the data collected at nadir in terms of changes in the ice thickness and the electromagnetic attenuation coefficient. The theory also addresses the failure of the spectral radiometer to determine ice thickness through observations of quarter wavelength excursions in the reflectivity. Radar data collected off-nadir showed a substantially different behavior compared to that collected near nadir. This difference is attributed to a change in propagation characteristics from quasi-specular return from the ice-water interface to scattering from the rough air-ice interface.

Swift, C. T.↗
NASA NTRS1988

Spaceborne meteorological radar studies

Various radar designs and methods are studied for the estimation of rainfall parameters from space. An immediate goal is to support the development of the spaceborne radar that has been proposed for the Tropical Rain Measuring Mission (TRMM). The effort is divided into two activities: a cooperative airborne rain measuring experiment with the Radio Research Laboratory of Japan (RRL), and the modelling of spaceborne weather radars. An airborne rain measuring experiment was conducted at Wallops Flight Facility in 1985 to 1986 using the dual-wavelength radar/radiometer developed by RRL. The data are presently being used to test a number of methods that are relevant to spaceborne weather radars. An example is shown of path-averaged rain rates as estimated from three methods: the standard reflectivity rain rate method (Z-R), a dual-wavelength method, and a surface reference method. The results from the experiment shows for the first time the feasibility of using attenuation methods from space. The purposes of the modelling are twofold: to understand in a quantitative manner the relationships between a particular radar design and its capability for estimating precipitation parameters and to help devise and test new methods. The models are being used to study the impact of various TRMM radar designs on the accuracy of rain rate estimation as well as to test the performance of range-profiling algorithms, the mirror-image method, and some recently devised graphical methods for the estimation of the drop size distribution.

Meneghini, R.↗