Search NASA⌕ Search

SEARCH · Search NASA

Results for “REE's”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A Smart System for the Contactless Measurement of Energy Expenditure

Energy Expenditure (EE) (kcal/day), a key element to guide obesity treatment, is measured from CO 2 production, VCO 2 (mL/min), and/or O 2 consumption, VO 2 (mL/min). Current technologies are limited due to the requirement of wearable facial accessories. A novel system, the Smart Pad, which measures EE via VCO 2 from a room’s ambient CO 2 concentration transients was evaluated. Resting EE (REE) and exercise VCO 2 measurements were recorded using Smart Pad and a reference instrument to study measurement duration’s influence on accuracy. The Smart Pad displayed 90% accuracy (±1 SD) for 14–19 min of REE measurement and for 4.8–7.0 min of exercise, using known room’s air exchange rate. Additionally, the Smart Pad was validated measuring subjects with a wide range of body mass indexes (BMI = 18.8 to 31.4 kg/m2), successfully validating the system accuracy across REE’s measures of ~1200 to ~3000 kcal/day. Furthermore, high correlation between subjects’ VCO 2 and λ for CO 2 accumulation was observed (p < 0.00001, R = 0.785) in a 14.0 m3 sized room. This finding led to development of a new model for REE measurement from ambient CO 2 without λ calibration using a reference instrument. The model correlated in nearly 100% agreement with reference instrument measures (y = 1.06x, R = 0.937) using an independent dataset (N = 56).

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Sourcing, Refining and Recycling of Rare-Earth Magnets

Permanent magnets today are used in a wide range of transportation, industrial, residential/commercial, consumer electronics, defense, domestic, data storage, wind energy, and medical markets and applications. There are five classes of commercial permanent magnet materials; however, magnets based on Nd-Fe-B account for over 60% of the global magnet production by value. They typically contain around 31 wt.% of rare earth elements (REEs), principally, Nd and Pr, plus Dy for higher-temperature performance. Nd-Fe-B magnets are forecast to grow throughout this decade, largely driven by the growth in electric vehicles of all types. However, several studies forecast a shortfall of the primary REEs from mined resources. In this paper, the sourcing, processing, and recycling of REEs are discussed. Additionally, presented are the advantages and disadvantages of the major recovery and recycling technologies for REEs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Utilizing Coal as a Source for REE/CMs

The Department of Energy’s program to produce Rare Earth Elements (REE) and Critical Minerals (CM) from coal and related materials was created to alleviate concerns over U.S. dependence on foreign supplies and to provide domestic industry a secure supply of the materials they need to participate in evolving markets. The lack of a mature domestic REE supply chains, however, present a major obstacle to achieving this goal. Engineers in the National Energy Technology Laboratory (NETL)’s Research and Innovation Center (RIC) have conducted numerous market and techno-economic analyses on domestic REE needs and pathways, as well as extensive interviews with industry leaders, all with the goal of investigating the opportunities for coal-derived REE and CM products. This talk will highlight some of the major challenges and key takeaways from this work (Presented at the ACS 26th Annual Green Chemistry & Engineering Conference).

Summers, William↗
DOE OSTI2022

System and method embodiments for element extraction and separation

The present disclosure provides system and method embodiments for extracting and separating rare earth elements (REEs) from various starting materials and sources. The system and method embodiments disclosed herein facilitate efficient REE extraction, separation, and/or isolation, even when the REEs are present in a starting material at a relatively low level compared to undesirable metals co-present in the starting material. In at least some examples, the disclosed system and method embodiments may be used to recover one or more REEs from coal derived acid mine drainage.

Boukhalfa, Hakim↗
DOE OSTI2023

Critical Minerals from Waste Streams in the Powder River Basin of Wyoming and Montana, USA

Background/Objectives. Critical minerals (CM) are essential for numerous industrial and defense applications, including green technologies that will help to meet carbon emission reduction goals. Many CM are currently mined and processed in countries that lack stringent environmental and labor regulations. Unconventional sources such as existing industrial waste streams could play a part in building an ethical CM supply chain. Additionally, waste streams created in the extraction and processing of CM could be used for other industrial or commercial purposes, thereby reducing waste and advancing a circular economy. Approach/Activities. The Department of Energy funded Powder River Basin (PRB) CORE-CM project is exploring all aspects of the carbon ore, rare earth element (REE), and CM value chain, including the potential for extraction of CM from industrial waste streams in the basin. Waste streams that have potential as CM feedstocks are being inventoried to assess the concentration of CM in each waste stream and to estimate volume and accessibility. Although basin-specific technologies for extraction of CM are still in development, waste streams that may be produced during these processes are being cataloged and mapped to potential secondary uses. Results/Lessons Learned. Initial studies of the CM potential of PRB coal ash show that this waste stream contains concentrations of greater than 300 ppm total REE (Bagdonas et al., 2022, Renewable and Sustainable Energy Reviews). Moreover, calcium-rich PRB coal ash is amenable to REE extraction (Taggart et al., 2016, Environmental Science and Technology). Wyoming coal is shipped to 28 states, meaning that coal ash produced at power stations across the US represents a potential widespread resource for the extraction of REE. In addition to coal mining and coal fired electricity generation, the PRB is home to other energy industries including oil and gas production, in-situ uranium mining, and bentonite mining. Historically, precious and base metal mining has taken place on the perimeter of the PRB. Waste streams from these industries are currently being evaluated for their CM potential. Assessing the CM resource potential of waste streams could contribute to the development of an ethical CM supply chain. Results from these studies can be replicated for other waste streams, increasing the likelihood of successful creation of circular economies.

Phillips, Erin↗
DOE OSTI2020

Adsorption of Rare Earth Elements onto DNA-Functionalized Mesoporous Carbon

The recovery and separation of rare earth elements (REEs) are of national importance owing to the specific usages, high demand, and low supply of these elements. In this research, we have investigated the adsorption of rare earth elements onto DNA-functionalized mesoporous carbons with a BET surface area of 605 m2/g and a median mesopore width of 48 Å. Additionally, three types of single-stranded DNA, one with 100 base units of thymine, another with 20 units of thymine, and the third, a 2000 unit long DNA from salmon milt were grafted on the carboxylated mesoporous carbon surface. All of the DNA-functionalized mesoporous carbons demonstrated higher adsorption of REEs compared to pristine mesoporous carbon and DNA grafted with 100 units of thymine demonstrated slightly higher adsorbed amounts compared to others. Pure neodymium (Nd(III)) adsorption in the aqueous phase demonstrated an adsorbed amount of 110.4 mg/g with respect to the initial concentration of 500 mg/g. A pH variation study with pure Nd(III) demonstrated that the adsorbed amount is higher at elevated pH compared to that at lower pH, thereby suggesting possible recovery at lower pH. Adsorption of a mixture of 16 REEs, including Sc, Lu, Tm, Yb, Er, Ho, Tb, Dy, Y, Eu, Gd, Sm, Ce, Nd, Pr, and La revealed that the adsorbed amount increased with an increase in the atomic weight and metallic radii of elements within the lanthanides. The calculation of the distribution coefficients for all of the equilibrium adsorption amounts suggested that adsorption is more effective in the lower concentration region. The Nd L3-edge X-ray absorption near edge structure (XANES) confirmed a 3+ oxidation state of Nd in the adsorbed phase. The extended X-ray absorption fine structure (EXAFS) confirmed the local atomic structure relaxation of Nd complexes in the adsorbed phase and shortening of the Nd–O bond distance by about 0.03–0.04 Å, which may be associated with their local complexation at the carbon surface.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Informed Critical Mineral Recovery from Fossil Energy Waste Feedstocks

Critical minerals (CM), such as rare earth elements (REE), cobalt, nickel, and lithium, have important uses in modern energy and technologies, yet are vulnerable to potential supply chain disruptions. One potential domestic CM source is fossil energy wastes, such as coal combustion ash, acid mine drainage (AMD) and treatment solids (AMD solids), and Oil and Gas (O&G) drilling wastes (drill cuttings and produced waters). CM recovery from these feedstocks is promising due to their abundant quantity and fast availability as waste products. To develop informed and effective CM recovery, DOE’s National Energy Technology Laboratory (NETL) have collected and analyzed CM data for aforementioned fossil energy wastes, and utilized advanced geochemical characterization (e.g., synchrotron microprobe, sequential extraction and geochemical modeling) to identify the CM speciation and binding environments. Novel methods that recover multiple CMs while co-producing other valuable byproducts from these feedstocks have been developed. Successful examples include: (1) the discovery of easily mobile REE phases in Ca-rich coal combustion ash resulted in a patented REE recovery process from the ash feedstock while producing zeolite sorbents from the extraction wastes; (2) the successful identification of REE/Co/Ni/Zn hosting phases in acid mine drainage treatment solids (AMD solids) has informed the sequential CM recovery from AMD solids and has inspired lithium sorbent development from the extraction wastes; (3) the recovery potential of Li and other CMs in O&G produced waters and drill cuttings has been explored while the extraction residuals have been demonstrated to support plant growth as soil supplements. The innovations driven by characterization information have the potential to maximize CM recovery revenue, offset the cost of waste management and wastewater treatments while reducing the cost and environmental footprint of CM extraction.

characterization and extraction of rare earth elem↗
DOE OSTI2025

High Pressure DME-Driven Fractional Crystallizations

Rare Earth Elements (REEs), include the 15 lanthanides plus yttrium and scandium and are crucial for various technologies and applications. Their low concentrations in the earth's crust require alternative sources. This study explores antisolvent fractional crystallization (FC) using dimethyl ether (DME) under high pressures to extract REEs from secondary sources such as mining waste, coal byproducts, and e-waste. DME's properties, including its solubility in water, small molecular size, and high vapor pressure, make it an effective antisolvent that can be easily recovered and reused. The method involves pressurizing DME to 1000-2000 psi in a reaction chamber with the test solution, followed by sample collection and analysis using ICP-MS and ICP-OES. This approach aims to address the limitations of current extraction methods, such as high energy consumption, chemical usage, and waste production, offering a potentially more efficient and sustainable solution for REE extraction.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2024

Chelator‐Assisted Precipitation‐Based Separation of the Rare Earth Elements Neodymium and Dysprosium from Aqueous Solutions

The rare earth elements (REEs) are critical resources for many clean energy technologies, but are difficult to obtain in their elementally pure forms because of their nearly identical chemical properties. Here, an analogue of macropa, G-macropa, was synthesized and employed for an aqueous precipitation-based separation of Nd 3+ and Dy 3+ . G-macropa maintains the same thermodynamic preference for the large REEs as macropa, but shows smaller thermodynamic stability constants. Molecular dynamics studies demonstrate that the binding affinity differences of these chelators for Nd 3+ and Dy 3+ is a consequence of the presence or absence of an inner-sphere water molecule, which alters the donor strength of the macrocyclic ethers. Leveraging the small REE affinity of G-macropa, we demonstrate that within aqueous solutions of Nd 3+ , Dy 3+ , and G-macropa, the addition of HCO 3 − selectively precipitates Dy 2 (CO 3 ) 3 , leaving the Nd 3+ −G-macropa complex in solution. With this method, remarkably high separation factors of 841 and 741 are achieved for 50 : 50 and 75 : 25 mixtures. Further studies involving Nd 3+ :Dy 3+ ratios of 95 : 5 in authentic magnet waste also afford an efficient separation as well. Finally, G-macropa is recovered via crystallization with HCl and used for subsequent extractions, demonstrating its good recyclability.

Gao, Yangyang↗
DOE OSTI2023

Effect of Ionic Strength and Anion Identity on Rare‐Earth Element Chelation by Poly(acrylic acid)

Abstract Rare‐earth elements (REEs) are critical components of many modern technologies, but their efficient separation and purification continue to pose significant challenges. Metal‐binding polymers may enable the development of promising alternative approaches to conventional separation techniques (e.g., solvent extraction), and insights into the interactions between the metal ions and polymers in solution are crucial to such development. In this work, the effect of ionic strength on the chelation of REEs by poly(acrylic acid) is investigated using isothermal titration calorimetry (ITC) to measure the metal‐binding thermodynamics. ITC experiments revealed that when ionic strength increases from increasing the sodium acetate buffer strength, polymer‐REE binding becomes increasingly disfavored. However, when ionic strength is increased by the addition of sodium chloride, binding again becomes increasingly disfavored, but to a lesser extent than when ionic strength increases from increasing the buffer strength. Additionally, the reduction in binding affinity is enthalpically driven when ionic strength is raised with sodium chloride, while it is entropically driven when raised with sodium acetate buffer, suggesting competive binding by the acetate ions. These results highlight the importance of ionic strength in polymer‐metal binding thermodynamics and will guide the development of new processes for the purification of critical metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Thermodynamic Model for Nd(III)–Sulfate Interaction at High Ionic Strengths and Elevated Temperatures: Applications to Rare Earth Element Extraction

Neodymium (Nd), a rare earth element (REE), is critical to numerous industries. Neodymium can be extracted from ore concentrates, waste materials, or recycled materials such as recycled Nd-Fe-B permanent magnets. In a standard process, concentrated sulfuric acid (H 2 SO 4 ) is used as an extraction/leaching agent. Therefore, knowledge of Nd(III)–sulfate interaction at high ionic strengths is important for optimization of the extraction process. In addition, sulfate is also a major species in natural surface waters and present in nuclear waste streams. Nd(III) has been used a chemical analog to trivalent actinides in nuclear waste research and development. Consequently, knowledge of Nd(III)-sulfate interactions is also impactful to the field of nuclear waste management. Here, in this study, we have developed a thermodynamic model that can describe the interaction of Nd(III) with sulfate to ionic strengths up to ~ 16.5 mol·kg –1 and to temperatures up to 100 °C. The model adopts the Pitzer formulation to describe activity coefficients of aqueous species. This model can be used to design and optimize a chemical process for REE recovery from ore concentrates, recycled materials, and acid mine drainage (AMD) and to understand the mobility of REEs and actinides in the environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Separation of zirconium and hafnium from early actinides and rare earth elements with eichrom’s pb resin in HCl

The separation of zirconium and hafnium isotopes from the early actinides and rare earth elements (REE) with Eichrom’s Pb resin has been studied. Batch studies were performed to characterize the behavior of actinium, thorium, zirconium, hafnium, lutetium, and yttrium on Pb resin from HCl solutions (0.001 M to 11 M). The early actinides and REE had no affinity for the resin at any concentration of HCl, but zirconium and hafnium showed a moderate uptake at high concentrations of HCl with a maximum extraction at 11 M HCl. Several column separations were tested, including with only tracer isotopes and with mass. Rapid, simple separations of zirconium from actinium, thorium, protactinium, and the REE with high yields and low elution volumes are presented with applications for tracer isotope production and fission product separations. Furthermore, the resin is less suitable for hafnium separations as hafnium tends to bleed off the resin even at high concentrations of HCl.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Column separation of tetravalent cerium fission products from trivalent rare earth radio-isotopes

Rapid and efficient isolation of individual rare earth element (REE) radioisotopes from complex mixtures is necessary to support the fields of nuclear forensics, medical isotope production and nuclear physics measurements. The separations must be robust and generate sufficiently high purity samples for subsequent radiological analysis. Current methodologies utilize a laborious two step Ce(IV)-iodate precipitation followed by Ce(IV)-nitrate di-(2-ethylhexyl)phosphoric acid/n-heptane extraction. This work reports an alternative method to isolate Ce fission product isotopes equilibrated with milligrams of cold carrier, from the remaining REE’s using a Ce(IV)/LN-resin (Eichrom Technologies) based separation. Optimization of Ce(IV) loading, REE(III) elution volume and subsequent Ce(III) stripping step utilized 166m Ho tracer. Mixed fission product experiments provided a further test of this LN-resin method, with analysis of purified 141/144 Ce, 147 Nd and 91 Y. Overall, while decontamination factors were lower for the LN-resin method, (vs. the combined precipitation/extraction) the simplicity of the technique and the satisfactory fission product analysis results point to the efficacy of this method.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Chloride Molten Salt Electrolysis Enables Integrated and Energy-Efficient Process for NdFeB Magnet Fabrication

Rare-earth elements (REEs) have been identified by NATO, the USDOE, and USGS as critical materials, i.e., materials which have significant demand yet pose supply-chain risks. Many of the existing processes for separations, metallization, and final parts production used across the REE supply chain involve energy intensive steps. For example, neodymium (Nd or NdPr) is produced using oxyfluoride electrolysis of Nd 2 O 3 , which requires hydrofluoric acid to produce a key electrolyte component (NdF 3 ) and generates undesired perfluorocarbon (PFC) gases. Such challenges make securing a resilient supply chain for NdFeB permanent magnets in countries like the United States prohibitively difficult. Here, we propose a chloride-based MSE process that circumvents these challenges, delivering high-purity NdPr from a (NdPr)Cl 3 feed from upstream REE separations. This eliminates environmentally-damaging steps of oxalate or carbonate precipitation and calcination, and enables superior production rates due to greater solubility of (NdPr)Cl 3 in chloride melts compared to Nd 2 O 3 . We show that CMSE generates high-purity NdPr (99.4 wt.%) while being energy-efficient (~ 6 kWh/kg-Nd). NdPr from CMSE was used to fabricate a NdFeB magnet with an excellent maximum energy product (> 40 MGOe), comparable to commercially available NdFeB magnets. This establishes CMSE as a leading approach for integrated, energy-efficient NdFeB magnet production.

Materials science↗
DOE OSTI2020

Ab initio molecular dynamics simulation of Nd3+ incorporation in calcite

Trivalent rare-earth elements (REEs) readily incorporate in Ca-bearing minerals such as calcite (CaCO3), a phenomenon with important implications for the use of REEs as biogeochemical tracers as well as for environmental remediation. Despite substantial efforts, determining the incorporation modes of trivalent REEs in calcite has remained challenging due to their presence in multiple coordination environments. This is particularly problematic for the interpretation of extended X-ray absorption fine structure (EXAFS) spectroscopy. In this work, ab initio molecular dynamics (AIMD) simulations of Nd3+ incorporated in calcite were performed to resolve its incorporation modes. Nd3+ and Ca2+ have very similar ionic radii but the additional positive charge requires a charge compensation scheme (CCS). Five CCSs were considered in AIMD simulations, and the resulting atomic trajectories were then used to compute EXAFS spectra for direct fitting to a published experimental spectrum. The results of the fits indicated that Nd3+ incorporates at the Ca2+ site in calcite in a mixture of six- and seven-fold coordination environments and through three main incorporation modes: associated with a protonated nearest-neighbor Ca2+ vacancy, incorporated as NdOH2+, and charge compensated by a remote species (on the spatial scale probed by EXAFS). The incorporation of Nd3+ in calcite via multiple modes was consistent with previous work, but the AIMD-EXAFS approach allowed for resolving the nature, proportion, and structure of the different coordination environments.

Kerisit, Sebastien N.↗
DOE OSTI2025

Spectrophotometric determination of the stability of La hydroxyl complexes at near neutral to alkaline pH from 25 to 75 °C

The hydrolysis of rare earth elements (REE) potentially controls their mobility during fluid-rock interaction in a broad range of pH and temperature conditions. However, there is still a lack of thermodynamic data for modeling accurately the stability of REE hydroxyl complexes in hydrothermal aqueous fluids. Here, in this study, UV–Vis spectrophotometric experiments were conducted from 25 to 75 °C in near-neutral to alkaline NaOH-bearing aqueous solutions with varying lanthanum (La) concentrations (0 to ∼0.23 mmol/kg). The color indicator m-cresol purple was used to determine in situ pH and derive the average OH− ligand number ($\overrightarrow{n}$) and formation constants for the La hydroxyl complexes (LaOH 2+ , La(OH) 2 + , and La(OH) 3 0 ). From 25 to 50 °C, $\overrightarrow{n}$ ranges between ∼1 and 2 at pH from 7.0 to 9.3. At 75 °C, $\overrightarrow{n}$ ranges between ∼1.5 and 3 at pH from 6.3 to 8.8. These results suggest the predominance of LaOH 2+ and La(OH) 2 + complexes from 25 to 50 °C, and an increased predominance of La(OH) 3 0 at 75 °C. The cumulative formation constants (β n °, n = 1 to 3) are derived for the reaction La 3+ + nOH − = La(OH) n 3-n , and fitted between 25 and 250 °C by combining the UV–Vis and literature solubility data. The resulting logβ n ° are expressed as function of temperature (T in Kelvin): logβ 1 ° = −1.786 + 0.0133 T + 1.049·10 3 /T; logβ 2 ° = −5.797 + 0.0267 T + 2.713·10 3 /T; logβ 3 ° = 6.435 + 0.0223 T + 512.7/T. A comparison between these new fits and existing extrapolations using the Helgeson-Kirkham-Flowers equation of state indicates significant differences in the predicted hydrolysis of La. The latter extrapolations should therefore be updated for the hydrolysis of REE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Distribution of rare earth and other critical elements in lignites from the Eocene Jackson Group, Texas

Coal is increasingly evaluated as a source of rare earth elements (REEs) in the United States to address the overreliance on imported REEs. The objective of this study was to assess the distribution of REEs in lignites from selected mining areas in the Texas Gulf Coastal Plain region. Thirty-one archived lignite and rock samples previously collected by the U.S. Geological Survey were analyzed for their rare earth element and critical mineral content. These include samples from one core (5400 and 5500 lignite horizons) and two opencast lignite mines (Gibbons Creek 3500 and 4500 horizons, and San Miguel horizons A to D) in the Eocene Jackson Group of the Texas Gulf of Mexico Coastal Plain. Some lithologies in the Gibbons Creek 3500 and 4500 lignite-bearing sections have high total rare earth, yttrium (Y), and scandium (Sc) (REYSc) values, up to 7800 ppm (ash basis) REYSc. The lignite lithologies show an enrichment in rare earths, [samarium (Sm) through gadolinium (Gd)]. The basal Gibbons Creek 3500 lignite bench shows a heavy rare earth element enrichment pattern resembling that often seen in peats through high volatile A bituminous coals. The 5500 lignite sequence, overlying the latter lignite sections, shows a light rare earth enrichment. The San Miguel lignite benches have heavy rare earth enrichments with a negative europium (Eu) anomaly.

58 GEOSCIENCES↗