Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFLECTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Titanium and Aluminum Rod-Replacement Experiments in Fully-Reflected 6.90% Enriched UO{sub 2} Fuel Rod Lattices

The Seven Percent Critical Experiment (7uPCX) was designed to provide benchmark criticality and reactor physics data for water-moderated pin-fueled nuclear reactor cores. The enrichment of the fuel was chosen to explore the enrichment range above the current 5% ceiling for US commercial pressurized water reactors. The experiment was part of the US Department of Energy (DOE) Nuclear Energy Research Initiative Project 01-124 titled 'Reactor Physics and Criticality Benchmark Evaluations for Advanced Nuclear Fuel'. Three sets of benchmark experiments have been completed using the 7uPCX and documented as LEUCOMP-THERM-080, LEU-COMP-THERM-078, and LEUCOMP-THERM-096. The experiments for LEUCOMP-THERM-080 and LEU-COMP-THERM-078 were done in fully-reflected arrays with the number of fuel rods in the array as the approach parameter. The experiments for LEU-COMP-THERM-096 are similar to those in LEUCOMP-THERM-080 except that the arrays are partially-reflected - the arrays were larger than would be possible with full reflection and the approach-to-critical experiments were done with the depth of the water in the critical assembly as the approach parameter. The experiments described here are similar to the fully-reflected experiments in LEU-COMP-THERM-080 with some of the central fuel rods in the array replaced by titanium rods, aluminum rods, and/or water. The experiments are designed to provide criticality safety benchmarks with significant reactivity from titanium and equivalent configurations with aluminum experiment rods. These experiments are documented as LEU-COMP-THERM-097. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

Crack depth profiling using guided wave angle dependent reflectivity

Tomographic corrosion monitoring techniques have been developed, using two rings of sensors around the circumference of a pipe. This technique is capable of providing a detailed wall thickness map, however this might not be the only type of structural damage. Therefore this concept is expanded to detect and size cracks and small corrosion defects like root corrosion. The expanded concept uses two arrays of guided-wave transducers, collecting both reflection and transmission data. The data is processed such that the angle-dependent reflectivity is obtained without using a baseline signal of a defect-free situation. The angle-dependent reflectivity is the input of an inversion scheme that calculates a crack depth profile. From this profile, the depth and length of the crack can be determined. Preliminary experiments show encouraging results. The depth sizing accuracy is in the order of 0.5 mm.

42 ENGINEERING↗
DOE OSTI2015

ON ESTIMATING THE HIGH-ENERGY CUTOFF IN THE X-RAY SPECTRA OF BLACK HOLES VIA REFLECTION SPECTROSCOPY

The fundamental parameters describing the coronal spectrum of an accreting black hole are the slope Γ of the power-law continuum and the energy E{sub cut} at which it rolls over. Remarkably, this latter parameter can be accurately measured for values as high as 1 MeV by modeling the spectrum of X-rays reflected from a black hole accretion disk at energies below 100 keV. This is possible because the details in the reflection spectrum, rich in fluorescent lines and other atomic features, are very sensitive to the spectral shape of the hardest coronal radiation illuminating the disk. We show that by fitting simultaneous NuSTAR (3–79 keV) and low-energy (e.g., Suzaku) data with the most recent version of our reflection model relxill one can obtain reasonable constraints on E{sub cut} at energies from tens of keV up to 1 MeV, for a source as faint as 1 mCrab in a 100 ks observation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Imaging surface topography with coherent x-ray reflectivity: Theory, kinematics, and simulations

A theoretical formalism is described for understanding coherent x-ray reflectivity (CXR) from the surface of a semi-infinite crystal having a variable surface topography, described by the height profile ℎ(𝑥,𝑦). The surface topography is imaged as a complex “effective density,” obtained from the phasing and inversion of the coherent x-ray reflectivity data, measured through a rocking scan centered at a vertical momentum transfer 𝑄$^{0}_{𝑧}$ and a vertical range Δ⁢𝑄 𝑧 . The formalism predicts that the effective density has an amplitude with a maximum located at the surface height for each position within the surface plane. The phase of the effective density has a lateral variation that is controlled by the surface height and a vertical variation that reflects a combination of the interfacial structure and specific choice of measurement conditions. This understanding enables direct observation of nanometer-scale interfacial topography, i.e., ℎ⁡(𝑥,𝑦)⁢𝑐 𝑠 (where 𝑐 𝑠 is the vertical substrate lattice parameter) with Å-scale sensitivity to surface height. Numerical simulations illustrate and confirm the theoretical results. These results show how the interpretation of the interfacial density phase obtained by CXR data inversion (i.e., surface topography with respect to a flat surface) is conceptually similar to that previously known for Bragg coherent diffraction imaging (BCDI) measurements of isolated nanoparticles (i.e., lattice displacements with respect to an ideal crystal lattice). This suggests that CXR can be thought of as a form of dark field imaging with respect to the bright field BCDI approach. An implication of these results is that interfacial imaging may bypass some of the significant challenges associated with BCDI imaging of multiple particles having different orientations.

X-ray imaging↗
DOE OSTI2018

Resonant Optical Reflection from AsSb–AlGaAs Metamaterials and Structures

The optical reflection in periodic structures based on a semiconductor AlGaAs matrix containing two-dimensional arrays of plasmonic AsSb nanoinclusions was studied. The number of periods was 12 or 24. The spatial period was near 110 nm in both cases. In the experimental optical reflection spectra at normal incidence we observed resonant Bragg diffraction with the main peaks at wavelengths of 757 or 775 nm, depending on the spatial period of the nanostructure. The magnitudes of the resonance peaks reached 19 and 31% for the systems of 12 and 24 AsSb–AlGaAs layers, while the volume fraction of the nanoinclusions was much less than 1%. In the case of light incident at inclined angles, the Bragg-diffraction pattern shifted according to Wulff-Bragg’s law. Numerical calculations of the optical reflection spectra were performed using the transfer-matrix method by taking into account the spatial geometry of the structures and the resonance characteristics of the plasmonic AsSb layers.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Characterization of the Surface of Silver Ion-Implanted Silicon by Optical Reflectance

The optical reflection of the surface of silicon implanted with Ag{sup +} ions at low energy of 30 keV in a wide dosage range of 5.0·10{sup 14}–1.5·10{sup 17} ion/cm{sup 2} was studied in parallel with electron microscopy observation of the samples. It was found that with increasing ion dose of irradiation, the reflection intensity in the UV range of the Si spectrum decreases monotonically due to amorphization and macrostructuring of Si near-surface layer. In the long-wavelength region of the reflection spectra, a selective band with a maximum near 830 nm is recorded due to the plasmon resonance of ion-synthesized Ag nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

Social relations: A critical reflection on the notion of social impacts as change

This article seeks to reflect upon the dominant conception of social impacts as the change produced by development projects and programs, and the ways in which those affected perceive and experience them. Identifying change may be a necessary but not sufficient step in acknowledging the complexity of social life. Engaging with critical scholarship produced in the fields of both social impact assessment (SIA) and of the social studies of technical/planned interventions, I discuss how the understanding of social impacts as change responds ultimately to a causal–instrumental logic that, in order to make sense of the complexity of social life, tends to reduce it to a series of variables and matrices. I suggest a complementary dialectical approach focusing on social relations. This approach, allows an alternative means of analysing social impacts concerning the way policies and projects reconfigure conditions and possibilities on a societal level. To accomplish this, and in order to go beyond the sequence of potential impacts (or changes) and their generic indicators, I propose a set of analytical questions that highlight how social relations are structured. Besides, on the assumption that development is both a form of governance and a space of contestation, negotiation, and activism, this approach may contribute to further the potential for reflection and mobilisation that the practice of SIA presents. - Highlights: •Change, which is inherent to social life, is insufficient to determine social impacts. •The critique of causal-instrumental logic provides insights to reflect on social impacts. •Social impacts should rather refer to how interventions reconfigure social relations. •The complex, mutually constitutive nature of social phenomena may thus be recognized. •SIA should go beyond change to the understanding of its socio-political significance.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Bidirectional reflection of semitransparent polytetrafluoroethylene (PTFE) sheets on a silver film

In our recent work, record-high solar reflectance (exceeding 99%) has been demonstrated by placing a layer of highly scattering, semitransparent polytetrafluoroethylene (PTFE) sheet on top of a silver film. This can significantly improve the performance of daytime radiative cooling system. Although a PTFE slab of 10-mm thick acts as an excellent diffuse reflector, it is unclear how this dual-layer structure made of a thin PTFE on a mirror-like reflector will alter the bidirectional reflection. Here, we report measurements of the bidirectional reflectance distribution function (BRDF) of the dual-layer structure using a laser scatterometer at the wavelength of 635 nm. Measurements of the BRDF and the bidirectional transmittance distribution function (BTDF) of free-standing PTFE sheets are also performed. The measured BRDF for a PTFE sheet as thin as 236 μm on Ag is essentially diffuse except at large incidence angles. A Monte Carlo ray-tracing method incorporating both surface scattering and volumetric scattering is developed to theoretically model the BRDF in order to elucidate the underlying mechanisms. Finally, the numerical model captures the main features and can be used to study the bidirectional properties for PTFE sheets thinner than what is experimentally available.

42 ENGINEERING↗
DOE OSTI2019

Experimental study of vibration isolation in thin-walled structural assemblies with embedded total-internal-reflection metasurfaces

The concept of total-internal-reflection elastic metasurface (TIR-MS) was recently proposed [1] and employed within flexible planar waveguides in order to create highly subwavelength sound-hard barriers impenetrable to low frequency elastic waves. The underlying physical mechanism relies on the design of engineered interfaces exhibiting extreme phase gradients such that any incoming wave at, approximately, any incidence will experience total-internal-reflection conditions. At the design frequency, the metasurface exhibits a large phase gradient such that, in accordance with the generalized Snell's law, the first critical angle is virtually always exceeded. It is worth noting that in practical realizations, the actual total reflection performance might vary depending on the angle of incidence. This dependence is due to the discrete implementation of the metasurface which results in diffraction effects. This paper presents the results of an experimental study that explores the vibration isolation performance of TIR-MS when applied to structures made of complex combinations of different elastic waveguides (e.g. bolted assemblies of beams, plates, and shells). Such system can be seen as a prototypical structure emulating mechanical assemblies of practical interest for many engineering applications. Experimental results confirm that, when the TIR-MS is embedded in the host waveguide, significant vibration isolation capabilities are achieved under quasi-omnidirectional incidence and highly subwavelength excitation conditions (i.e. the ratio of the operating wavelength to the width of the TIR-MS is approximately 5.25). Furthermore, these experimental results suggest new interesting directions to achieve vibration isolation and mechanical energy filtering for practical engineering systems.

42 ENGINEERING↗
DOE OSTI2014

IMPACT OF DIELECTRIC PARAMETERS ON THE REFLECTIVITY OF 3C-SiC WAFERS WITH A ROUGH SURFACE MORPHOLOGY IN THE RESTSTRAHLEN REGION

A layer-on-substrate model is used to obtain the infrared reflectance for 3C-SiC with a rough surface morphology. The effect of varying dielectric parameters of the “damaged layer” on the observed reflectivity of the 3C-SiC in the reststrahlen region is assessed. Different simulated reflectance spectra are obtained to those if the dielectric parameters of the “substrate” were varied. Most notable changes in the shape of the simulated reststrahlen peak are observed for changes in the high frequency dielectric constant, the phonon damping constant, the phonon frequencies and “thickness” of damaged surface layer.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Using soil library hyperspectral reflectance and machine learning to predict soil organic carbon: Assessing potential of airborne and spaceborne optical soil sensing

Soil organic carbon (SOC) is a key variable to determine soil functioning, ecosystem services, and global carbon cycles. Spectroscopy, particularly optical hyperspectral reflectance coupled with machine learning, can provide rapid, efficient, and cost-effective quantification of SOC. However, how to exploit soil hyperspectral reflectance to predict SOC concentration, and the potential performance of airborne and satellite data for predicting surface SOC at large scales remain relatively underknown. Here, this study utilized a continental-scale soil laboratory spectral library (37,540 full-pedon 350–2500 nm reflectance spectra with SOC concentration of 0–780 g·kg –1 across the US) to thoroughly evaluate seven machine learning algorithms including Partial-Least Squares Regression (PLSR), Random Forest (RF), K-Nearest Neighbors (KNN), Ridge, Artificial Neural Networks (ANN), Convolutional Neural Networks (CNN), and Long Short-Term Memory (LSTM) along with four preprocessed spectra, i.e. original, vector normalization, continuum removal, and first-order derivative, to quantify SOC concentration. Furthermore, by using the coupled soil-vegetation-atmosphere radiative transfer model, we simulated twelve airborne and spaceborne hyper/multi-spectral remote sensing data from surface bare soil laboratory spectra to evaluate their potential for estimating SOC concentration of surface bare soils. Results show that LSTM achieved best predictive performance of quantifying SOC concentration for the whole data sets (R 2 = 0.96, RMSE = 30.81 g·kg –1 ), mineral soils (SOC ≤ 120 g·kg –1 , R 2 = 0.71, RMSE = 10.60 g·kg –1 ), and organic soils (SOC > 120 g·kg –1 , R 2 = 0.78, RMSE = 62.31 g·kg –1 ). Spectral data preprocessing, particularly the first-order derivative, improved the performance of PLSR, RF, Ridge, KNN, and ANN, but not LSTM or CNN. We found that the SOC models of mineral and organic soils should be distinguished given their distinct spectral signatures. Finally, we identified that the shortwave infrared is vital for airborne and spaceborne hyperspectral sensors to monitor surface SOC. This study highlights the high accuracy of LSTM with hyperspectral/multispectral data to mitigate a certain level of noise (soil moisture <0.4 m 3 ·m –3 , green leaf area < 0.3 m 2 ·m –2 , plant residue <0.4 m 2 ·m –2 ) for quantifying surface SOC concentration. Forthcoming satellite hyperspectral missions like Surface Biology and Geology (SBG) have a high potential for future global soil carbon monitoring, while high-resolution satellite multispectral fusion data can be an alternative.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Surface albedo and reflectance: Review of definitions, angular and spectral effects, and intercomparison of major data sources in support of advanced solar irradiance modeling over the Americas

This study defines albedo and reflectance in the context of solar applications. It examines the main sources of surface albedo data that can be used to help solar irradiance modeling efforts, such as undertaken by the National Renewable Energy Laboratory (NREL) over the Americas, for instance, per the National Solar Radiation Database (NSRDB). The MODIS-based albedo database, as used as input to derive historical time series of solar irradiance in the current version of the NSRDB, is compared to other sources of global gridded data over the Americas in general and some specific areas in particular. The particular role of snow cover is analyzed. It is found that, in the current MODIS-based NSRDB implementation, snow-impacted areas have been assigned a too high albedo in general because of the lack of consideration for the antagonistic effect of surface roughness, among other factors. Other albedo databases, such as CMSAF, MINES-ParisTech or the ERA5 reanalysis, do not display such high albedos at latitudes above ~40 degrees N. The gap-free and snow-free MODIS MCD43GF product is found affected by a long-term downward trend over some areas and out-of-phase seasonal effects over other areas, in comparison with MERRA-2 reanalysis data in particular. Comparisons with actual albedo measurements at the arid Desert Rock site in Nevada also show that albedo data derived from land surface models are affected by systematic bias. Five albedo databases are intercompared for the area around Ivanpah Playa, California, which has great importance in both remote sensing and solar applications. Various aspects of the proper usage of albedo data in solar radiation modeling are discussed, regarding calculations of both the backscattering process and reflections on a tilted surface: spatial resolution, temporal resolution, angular effects, and spectral effects. An important distinction is made between the use of albedo data at ~4 km resolution for backscattering calculations and at ~10 m resolution for transposition calculations to tilted planes, which might additionally require spectral information for monofacial or bifacial PV applications. It is shown that the tilted calculations usually performed in solar resource assessments are far from realistic in the case of most large-scale PV applications, for which a more suitable methodological approach is described. For such needs, the limitations of the current sources of high-resolution reflectance data are discussed. The impact of surface albedo estimation errors on the estimation of backscattered irradiance over snowy areas is evaluated. It is found non-negligible, and even large under cloudy conditions.

14 SOLAR ENERGY↗
DOE OSTI2021

Thermal model to quantify the impact of sub-bandgap reflectance on operating temperature of fielded PV modules

Minimizing module heating is an effective way to increase the lifetime energy output of photovoltaic systems. Maximizing the reflection of light that is unusable for energy conversion is one of the most promising ways to reduce the operating temperature of fielded modules. We derive a model based on a steady-state energy balance to quantify the temperature benefit of cell or module optical modifications aimed at improving reflection of light with photon energies below the photovoltaic cell bandgap energy. This more detailed model is then simplified so that, from outdoor measured data, temperature differences arising from reflectance can be isolated from those arising from irradiance, wind speed, and module standard-test-condition efficiency.

14 SOLAR ENERGY↗
DOE OSTI2022

Noncontact Andreev Reflection as a Direct Probe of Superconductivity on the Atomic Scale

Direct detection of superconductivity has long been a key strength of point-contact Andreev reflection. However, its applicability to atomic-scale imaging is limited by the mechanical contact of the Andreev probe. To this end, we present a new method to probe Andreev reflection in a tunnel junction, leveraging tunneling spectroscopy and junction tunability to achieve quantitative detection of Andreev scattering. This method enables unambiguous assignment of superconducting origins of current-carrying excitations, as well as detection of higher order Andreev processes in atomic-scale junctions. Herein, we furthermore revealed distinct sensitivity of Andreev reflection to natural defects, such as step edges, even in classical superconductors. The methodology opens a new path to nano- and atomic-scale imaging of superconducting properties, including disordered superconductors and proximity to phase transitions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2013

Optical reflectivity improvement by upgrading metallic glass film quality

The effects of atomic-defect and free-volume amounts of metallic glassy film on the optical reflectivity and mechanical properties of the sputtered metallic glass thin films are explored. With a lower Ar working pressure and the proper post-annealing at temperatures slightly lower than the glass-transition temperature T{sub g}, film free volumes and defects would reduce, resulting in better atomic bonding and higher film hardness/modulus, which in turn leads to lower electric resistivity and higher optical reflectivity. Annealing above T{sub g} would induce crystalline structure which would lead to competition with the optical transition of the Drude free electrons and hinder the optical reflectivity in the visible range.

36 MATERIALS SCIENCE↗
DOE OSTI2013

High-frequency nonreciprocal reflection from magnetic films with overlayers

We perform a theoretical study of the nonreciprocal reflection of high-frequency microwave radiation from ferromagnetic films with thin overlayers. Reflection from metallic ferromagnetic films is always near unity and shows no nonreciprocity. In contrast, reflection from a structure which has a dielectric overlayer on top of a film composed of insulated ferromagnetic nanoparticles or nanostructures can show significant nonreciprocity in the 75–80 GHz frequency range, a very high value. This can be important for devices such as isolators or circulators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

An effective medium study of surface plasmon polaritons in nanostructured gratings using attenuated total reflection

Recent work studied surface plasmon resonances in structured materials by the method of attenuated total reflection using a prism on top of a metallic grating. That calculation considered Transverse Magnetic polarized radiation, involved an expansion in 121 Fourier modes, and found a number of interesting features. Many of these features were attributed to localized plasmons or other factors, which arise from a discrete structure. We use a simple effective medium theory to address the same problem, and find many of the same reflection features observed in the more complex calculation, indicating that localization is not an important factor. We also evaluate the possibility of using some of the new features in the reflection spectrum for bio-sensing and find that the sensitivity of the system to small changes in relative permittivity is increased compared to some standard methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

The enlargement of high reflectance range in ultra-narrow bandpass filter with disordered one-dimensional photonic crystal

The conventional ultra-narrow bandpass filter structure has only a very limited width of high-reflectance range. This study, by introducing disorder into one-dimensional (1D) photonic crystal, attempts to enlarge the width of high-reflectance range while keeping the ultra-narrow bandpass. Enlargement by 46.8% was obtained after theoretical design. Since this structure contains some degree of disorder already, it has a strong tolerance of the variation of layer thicknesses. Unlike studies using conventional periodic structures, theoretical statistical results in this study demonstrate that high quality remains even after allowing for ±5% variation of layer thicknesses. This indicates that only a very low thickness control precision is required in the future and the production difficulty is immensely lowered. To put the construction to test, a structure has been developed and demonstrated by a magnetron reactive sputtering coating system, which agrees with the theoretical result very well. By introducing disorder into the periodic 1D photonic crystal structure, the high-reflectance range is significantly extended by 37%, with an ultra-narrow pass band of 0.8 nm and intensity of 82%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗